Searched refs:CIR (Results 1 - 34 of 34) sorted by relevance

/linux-4.4.14/drivers/media/rc/
H A Dnuvoton-cir.h2 * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
142 /* CIR settings */
144 /* total length of CIR and CIR WAKE */
150 /* CIR Regs */
168 /* CIR IRCON settings */
185 /* CIR IRSTS settings */
195 /* CIR IREN settings */
205 /* CIR FIFOCON settings */
228 /* CIR IRFIFOSTS settings */
239 /* CIR WAKE UP Regs */
257 /* CIR WAKE UP IRCON settings */
269 /* CIR WAKE IRSTS Bits */
277 /* CIR WAKE UP IREN Bits */
287 /* CIR WAKE FIFOCON settings */
299 /* CIR WAKE SRXFSTS settings */
306 * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes
310 /* CIR Wake byte comparison tolerance */
343 #define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */
347 /* next three regs valid for both the CIR and CIR_WAKE logical devices */
368 /* w83677hg CIR pin config */
373 /* w83667hg CIR pin config */
378 /* MCE CIR signal length, related on sample period */
380 /* MCE CIR controller signal length: about 43ms
385 /* MCE CIR keyboard signal length: about 26ms
391 /* MCE CIR mouse signal length: about 24ms
H A Dfintek-cir.h2 * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
175 /* Logical device number of the CIR function */
179 /* CIR Logical Device (LDN 0x08) config registers */
187 #define CIR_CR_DEV_EN 0x30 /* bit0 = 1 enables CIR */
188 #define CIR_CR_BASE_ADDR_HI 0x60 /* MSB of CIR IO base addr */
189 #define CIR_CR_BASE_ADDR_LO 0x61 /* LSB of CIR IO base addr */
190 #define CIR_CR_IRQ_SEL 0x70 /* bits3-0 store CIR IRQ */
204 /* CIR device registers */
211 /* Bits to enable CIR wake */
224 * CIR status register (0x00):
225 * 7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable)
239 * CIR TX control register (0x02):
H A Dnuvoton-cir.c2 * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
134 pr_info("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME); cir_dump_regs()
135 pr_info(" * CR CIR ACTIVE : 0x%x\n", cir_dump_regs()
137 pr_info(" * CR CIR BASE ADDR: 0x%x\n", cir_dump_regs()
140 pr_info(" * CR CIR IRQ NUM: 0x%x\n", cir_dump_regs()
145 pr_info("%s: Dump CIR registers:\n", NVT_DRIVER_NAME); cir_dump_regs()
172 pr_info("%s: Dump CIR WAKE logical device registers:\n", cir_wake_dump_regs()
174 pr_info(" * CR CIR WAKE ACTIVE : 0x%x\n", cir_wake_dump_regs()
176 pr_info(" * CR CIR WAKE BASE ADDR: 0x%x\n", cir_wake_dump_regs()
179 pr_info(" * CR CIR WAKE IRQ NUM: 0x%x\n", cir_wake_dump_regs()
184 pr_info("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME); cir_wake_dump_regs()
219 pr_info("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len); cir_wake_dump_regs()
304 /* output pin selection: enable CIR, with WB sensor enabled */ nvt_cir_ldev_init()
310 /* Select CIR logical device and enable */ nvt_cir_ldev_init()
319 nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d", nvt_cir_ldev_init()
325 /* Select ACPI logical device, enable it and CIR Wake */ nvt_cir_wake_ldev_init()
329 /* Enable CIR Wake via PSOUT# (Pin60) */ nvt_cir_wake_ldev_init()
335 /* Select CIR Wake logical device and enable */ nvt_cir_wake_ldev_init()
344 nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d", nvt_cir_wake_ldev_init()
703 /* Read fifocount bytes from CIR Sample RX FIFO register */ nvt_get_rx_ir_data()
752 /* interrupt service routine for incoming and outgoing CIR data */ nvt_cir_isr()
789 /* Interrupt may be shared with CIR Wake, bail if CIR not enabled */ nvt_cir_isr()
792 nvt_dbg_verbose("%s exiting, CIR not enabled", __func__); nvt_cir_isr()
859 /* Interrupt service routine for CIR Wake */ nvt_cir_wake_isr()
878 /* Interrupt may be shared with CIR, bail if Wake not enabled */ nvt_cir_wake_isr()
911 /* enable the CIR logical device */ nvt_enable_cir()
926 /* disable CIR interrupts */ nvt_disable_cir()
941 /* disable the CIR logical device */ nvt_disable_cir()
1033 /* Initialize CIR & CIR Wake Logical Devices */ nvt_probe()
1039 /* Initialize CIR & CIR Wake Config Registers */ nvt_probe()
1125 /* disable CIR */ nvt_remove()
1128 /* enable CIR Wake (for IR power-on) */ nvt_remove()
1160 /* disable all CIR interrupts */ nvt_suspend()
1186 /* Enable CIR logical device */ nvt_resume()
1206 { "WEC0530", 0 }, /* CIR */
1207 { "NTN0530", 0 }, /* CIR for new chip's pnp id*/
1226 MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver");
H A Dfintek-cir.c2 * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
120 pr_info("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME); cir_dump_regs()
121 pr_info(" * CR CIR BASE ADDR: 0x%x\n", cir_dump_regs()
124 pr_info(" * CR CIR IRQ NUM: 0x%x\n", cir_dump_regs()
129 pr_info("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME); cir_dump_regs()
214 /* Select CIR logical device and enable */ fintek_cir_ldev_init()
218 /* Write allocated CIR address and IRQ information to hardware */ fintek_cir_ldev_init()
224 fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)", fintek_cir_ldev_init()
228 /* enable CIR interrupts */ fintek_enable_cir_irq()
248 /* Allow CIR PME's to wake system */ fintek_enable_wake()
250 /* Enable CIR PME's */ fintek_enable_wake()
252 /* Clear CIR PME status register */ fintek_enable_wake()
392 /* interrupt service routine for incoming and outgoing CIR data */ fintek_cir_isr()
441 /* enable the CIR logical device */ fintek_enable_cir()
458 /* disable the CIR logical device */ fintek_disable_cir()
531 /* Initialize CIR & CIR Wake Logical Devices */ fintek_probe()
536 /* Initialize CIR & CIR Wake Config Registers */ fintek_probe()
599 /* disable CIR */ fintek_remove()
602 /* enable CIR Wake (for IR power-on) */ fintek_remove()
624 /* disable all CIR interrupts */ fintek_suspend()
652 /* Enable CIR logical device */ fintek_resume()
671 { "FIT0002", 0 }, /* CIR */
H A Dene_ir.h2 * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
92 /* CIR Config register #1 */
104 /* CIR config register #2 */
H A Dsunxi-cir.c38 /* CIR mode */
75 /* Required frequency for IR0 or IR1 clock in CIR mode */
260 /* Enable CIR Mode */ sunxi_ir_probe()
H A Dite-cir.h2 * Driver for ITE Tech Inc. IT8712F/IT8512F CIR
124 /* ITE CIR device structure */
291 * Note that the CIR registers are not directly available to the host, because
454 * CIR module and several other modules. A few modules are directly accessible
456 * micro-controller. The CIR module is only accessible by the
461 * between the host CPU and the CIR module. The firmware implements a kind of
475 #define IT8709_REG_IDX 0x1b /* index of the CIR register to access */
H A Dite-cir.c2 * Driver for ITE Tech Inc. IT8712F/IT8512 CIR
275 /* interrupt service routine for incoming and outgoing CIR data */ ite_cir_isr()
1041 /* read the value of a CIR register */ it8709_rr()
1056 /* write the value of a CIR register */ it8709_wr()
1344 .model = "ITE8704 CIR transceiver",
1369 .model = "ITE8713 CIR transceiver",
1394 .model = "ITE8708 CIR transceiver",
1420 .model = "ITE8709 CIR transceiver",
1449 {"ITE8713", 1}, /* CIR found in EEEBox 1501U */
1712 MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver");
H A Dene_ir.c2 * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX)
363 /* this enables/disables the CIR RX engine */ ene_rx_enable_cir_engine()
370 /* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/ ene_rx_select_input()
378 * the hw CIR engine
1214 "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
H A Dwinbond-cir.c25 * o Wake-On-CIR functionality
194 #define WBCIR_NAME "Winbond CIR"
/linux-4.4.14/arch/sh/drivers/pci/
H A Dpci-sh5.c61 pci_cir = SH5PCI_READ(CIR); pcish5_err_irq()
68 printk("PCI CIR -> 0x%x\n", pci_cir); pcish5_err_irq()
77 printk("PCI CIR -> 0x%x\n", pci_cir); pcish5_err_irq()
/linux-4.4.14/drivers/acpi/
H A Dacpi_pnp.c96 {"FIT0002"}, /* CIR */
99 {"ITE8713"}, /* CIR found in EEEBox 1501U */
103 {"WEC0530"}, /* CIR */
104 {"NTN0530"}, /* CIR for new chip's pnp id */
105 /* Winbond CIR */
110 /* Winbond CIR */
299 {"WEC1022"}, /* Winbond CIR port, should not be probed. We should keep track of it to prevent the legacy serial driver from probing it */
/linux-4.4.14/drivers/watchdog/
H A Dit87_wdt.c70 #define CIR 0x0a macro
113 /* CIR Configuration Register LDN=0x0a */
119 /* CIR Controller */
678 /* If we haven't Gameport support, try to get CIR support */ it87_wdt_init()
692 superio_select(CIR); it87_wdt_init()
726 /* Initialize CIR to use it as keepalive source */ it87_wdt_init()
751 superio_select(CIR); it87_wdt_init()
777 superio_select(CIR); it87_wdt_exit()
H A Dit8712f_wdt.c94 "use KBD, MOUSE or CIR if you have some external way to "
/linux-4.4.14/arch/sh/kernel/cpu/sh5/
H A Dprobe.c34 /* CPU.VCR aliased at CIR address on SH5-101 */ cpu_probe()
/linux-4.4.14/drivers/hid/
H A Dhid-picolcd_cir.c105 /* initialize CIR input device */ picolcd_init_cir()
H A Dhid-picolcd_core.c489 /* Setup CIR input device */ picolcd_probe_lcd()
/linux-4.4.14/include/uapi/linux/
H A Dserial_core.h51 #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
H A Dserial_reg.h358 #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */
/linux-4.4.14/drivers/media/dvb-frontends/
H A Dlgdt3306a.c942 /* 11. Using the imaginary part of CIR in CIR loading */ lgdt3306a_init()
944 val &= 0xef; /* do not use imaginary of CIR */ lgdt3306a_init()
1291 /* Strong Main CIR */ lgdt3306a_pre_monitoring()
/linux-4.4.14/drivers/tty/serial/8250/
H A D8250_pnp.c370 /* Winbond CIR port, should not be probed. We should keep track
H A D8250_core.c1044 "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", serial8250_register_8250_port()
H A D8250_port.c230 .name = "CIR port"
/linux-4.4.14/drivers/media/usb/cx231xx/
H A Dcx231xx-i2c.c478 [0x8e >> 1] = "CIR",
H A Dcx231xx-cards.c1614 /* init CIR module TBD */ cx231xx_usb_probe()
/linux-4.4.14/drivers/media/pci/saa7164/
H A Dsaa7164-cards.c799 * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */ hauppauge_eeprom()
/linux-4.4.14/drivers/misc/altera-stapl/
H A Daltera-jtag.c77 /* UDR SIRS CIR SIR E1IR PIR E2IR UIR */
/linux-4.4.14/arch/arm/mach-omap2/
H A Dboard-rx51-peripherals.c1218 .pwm_timer = 9, /* Use GPT 9 for CIR */
/linux-4.4.14/arch/arm/mach-pxa/include/mach/
H A Dmfp-pxa930.h432 /* CIR */
H A Dmfp-pxa300.h425 /* CIR */
/linux-4.4.14/drivers/isdn/hardware/mISDN/
H A Dw6692.c433 pr_debug("%s: ISC CIR %02X\n", card->name, cir); handle_statusD()
/linux-4.4.14/drivers/isdn/hisax/
H A Dw6692.c518 debugl1(cs, "W6692 ISC CIR=0x%02X", v1); W6692_interrupt()
/linux-4.4.14/drivers/mmc/host/
H A Dvia-sdmmc.c121 * CIR : Card Insertion or Removal interrupt detected on GPI pin
/linux-4.4.14/drivers/net/wan/
H A Dsdla.c405 netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n", sdla_errors()

Completed in 885 milliseconds