Searched refs:processing (Results 1 - 200 of 1644) sorted by relevance

123456789

/linux-4.1.27/arch/ia64/kernel/
H A Dnr-irqs.c5 * This must be calculated before processing asm-offset.c.
H A Dirq.c125 * Save it for phase 2 processing migrate_irqs()
173 * Phase 2: Perform interrupt processing for all entries reported in fixup_irqs()
/linux-4.1.27/drivers/gpu/drm/radeon/
H A Ddrm_buffer.h86 * Copy the user data to the begin of the buffer and reset the processing
106 * The processing location of the buffer is also advanced to the next byte
117 * current processing location.
123 * Call to this function doesn't change the processing location.
135 * the current processing location.
137 * Call to this function doesn't change the processing location.
H A Ddrm_buffer.c91 * Copy the user data to the begin of the buffer and reset the processing
149 * The processing location of the buffer is also advanced to the next byte
/linux-4.1.27/include/linux/
H A Dsunserialcore.h20 /* Serial keyboard defines for L1-A processing... */
H A Dpreempt_mask.h59 * Are we doing bottom half or hardware interrupt processing?
61 * in_softirq - Are we currently processing softirq or have bh disabled?
62 * in_serving_softirq - Are we currently processing softirq?
H A Dhardirq.h48 * Exit irq context without processing softirqs:
H A Dcoda_psdev.h10 /* communication pending/processing queues */
H A Dlguest.h48 * place them in here for processing the next time the Host wants.
H A Dmoduleloader.h77 /* Any final processing of module before access. Return -error or 0. */
H A Ddlm.h111 * lockast: function DLM executes when it completes processing the request
116 * 0 if request is successfully queued for processing
159 * 0 if request is successfully queued for processing
H A Dtty_ldisc.h48 * some processing on the characters first. If this function is
84 * processing. <cp> is a pointer to the buffer of input
122 * processing. <cp> is a pointer to the buffer of input
H A Dthread_info.h115 * set_restore_sigmask() - make sure saved_sigmask processing gets done
H A Dhid-sensor-hub.h135 * Used to register callbacks by client processing drivers. Sensor
136 * hub core driver will call these callbacks to offload processing
H A Dcrc8.h87 * or the previous returned value) to allow for processing of
H A Ddynamic_queue_limits.h14 * actually been consumed, but completion processing has not yet run
H A Dfscache-cache.h96 #define FSCACHE_OP_MYTHREAD 0x0002 /* - processing is done be issuing thread, not pool */
180 * fscache_enqueue_retrieval - Enqueue a retrieval operation for processing
183 * Enqueue a retrieval operation for processing by the FS-Cache thread pool.
322 FSCACHE_OBJECT_EV_ERROR, /* T if fatal error occurred during processing */
/linux-4.1.27/include/linux/input/
H A Dcyttsp.h34 /* Active Power state scanning/processing refresh interval */
38 /* Low Power state scanning/processing refresh interval */
/linux-4.1.27/drivers/media/i2c/
H A Dtvp5150_reg.h17 #define TVP5150_LUMA_PROC_CTL_1 0x07 /* Luminance processing control #1 */
18 #define TVP5150_LUMA_PROC_CTL_2 0x08 /* Luminance processing control #2 */
24 #define TVP5150_LUMA_PROC_CTL_3 0x0e /* Luminance processing control #3 */
40 #define TVP5150_CHROMA_PROC_CTL_1 0x1a /* Chrominance processing control #1 */
41 #define TVP5150_CHROMA_PROC_CTL_2 0x1b /* Chrominance processing control #2 */
/linux-4.1.27/fs/dlm/
H A Drequestqueue.c58 * here before processing the message it got. If a new dlm_ls_stop() arrives
59 * while we're processing these saved messages, it may block trying to suspend
62 * waiting for us, then this processing may be aborted due to locking_stopped.
112 * We want to delay dlm_recv processing new requests until dlm_recoverd has
113 * finished processing the old saved requests. We don't check for locking
H A Dmember.c604 * the stop. This includes ensuring dlm_recv isn't processing a dlm_ls_stop()
608 * processing an rcom at the same time. Stopping dlm_recv also makes dlm_ls_stop()
618 * dlm to quit any processing (see RUNNING, dlm_locking_stopped()). dlm_ls_stop()
651 * running) has noticed RECOVER_STOP above and quit processing the dlm_ls_stop()
/linux-4.1.27/arch/arm64/include/asm/
H A Dinsn.h34 * 1 0 0 - Data processing, immediate
37 * - 1 0 1 Data processing - register
38 * 0 1 1 1 Data processing - SIMD and floating point
39 * 1 1 1 1 Data processing - SIMD and floating point
44 AARCH64_INSN_CLS_DP_IMM, /* Data processing - immediate */
45 AARCH64_INSN_CLS_DP_REG, /* Data processing - register */
46 AARCH64_INSN_CLS_DP_FPSIMD, /* Data processing - SIMD and FP */
/linux-4.1.27/drivers/staging/rtl8723au/include/
H A Drtw_ht.h34 /* for processing Tx A-MPDU */
/linux-4.1.27/include/acpi/
H A Dacpi_lpat.h2 * acpi_lpat.h - LPAT table processing functions
/linux-4.1.27/fs/hfsplus/
H A Dxattr.h6 * Logic of processing extended attributes
/linux-4.1.27/include/linux/spi/
H A Dspi_bitbang.h43 /* start or stop queue processing */
/linux-4.1.27/arch/powerpc/boot/
H A Dplanetcore.h22 /* Prepare the table for processing, by turning all newlines
/linux-4.1.27/drivers/net/wireless/ti/wlcore/
H A Devent.h34 * is not processing events, an interrupt is issued to signal that a buffer
35 * is ready. Once the host is done with processing events from one buffer,
/linux-4.1.27/drivers/net/wireless/ath/
H A Dath.h233 * @ATH_DBG_RESET: reset processing
235 * @ATH_DBG_EEPROM: eeprom processing
237 * @ATH_DBG_INTERRUPT: interrupt processing
238 * @ATH_DBG_REGULATORY: regulatory processing
239 * @ATH_DBG_ANI: adaptive noise immunitive processing
244 * @ATH_DBG_PS: power save processing
/linux-4.1.27/arch/sparc/kernel/
H A Dvisemul.c78 /* 000000000 - Eight 8-bit edge boundary processing */
81 /* 000000001 - Eight 8-bit edge boundary processing, no CC */
84 /* 000000010 - Eight 8-bit edge boundary processing, little-endian */
87 /* 000000011 - Eight 8-bit edge boundary processing, little-endian, no CC */
90 /* 000000100 - Four 16-bit edge boundary processing */
93 /* 000000101 - Four 16-bit edge boundary processing, no CC */
96 /* 000000110 - Four 16-bit edge boundary processing, little-endian */
99 /* 000000111 - Four 16-bit edge boundary processing, little-endian, no CC */
102 /* 000001000 - Two 32-bit edge boundary processing */
105 /* 000001001 - Two 32-bit edge boundary processing, no CC */
108 /* 000001010 - Two 32-bit edge boundary processing, little-endian */
111 /* 000001011 - Two 32-bit edge boundary processing, little-endian, no CC */
H A DMakefile11 # Undefine sparc when processing vmlinux.lds - it is used
/linux-4.1.27/drivers/net/ethernet/altera/
H A Daltera_sgdmahw.h87 * bit 5: starts descriptor processing
118 #define SGDMA_CTRLREG_START BIT(5) /* starts descriptor processing */
/linux-4.1.27/drivers/net/wireless/ath/ath9k/
H A Ddynack.h60 * struct ath_dynack - dynack processing info
61 * @enabled: enable dyn ack processing
H A Ddfs.h27 * @rs: RX status after processing descriptor
/linux-4.1.27/drivers/staging/rtl8192u/ieee80211/
H A Ddot11d.c66 * stop processing. Dot11d_UpdateCountryIe()
73 * processing. Dot11d_UpdateCountryIe()
/linux-4.1.27/drivers/net/wireless/ti/wl1251/
H A Devent.h32 * is not processing events, an interrupt is issued to signal that a buffer
33 * is ready. Once the host is done with processing events from one buffer,
/linux-4.1.27/drivers/dma/ppc4xx/
H A Dxor.h37 #define XOR_SR_XCP_BIT (1<<31) /* core processing */
53 #define XOR_CRSR_CLP_BIT (1<<25) /* continue list processing */
/linux-4.1.27/drivers/isdn/hardware/eicon/
H A Ddfifo.h50 #define DIVA_DFIFO_READY 0x40 /* This block is ready for processing */
/linux-4.1.27/drivers/media/usb/pvrusb2/
H A Dpvrusb2-cs53l32a.h28 driver which handles device video processing. This interface is
H A Dpvrusb2-cx2584x-v4l.h28 driver which handles combined device audio & video processing.
H A Dpvrusb2-video-v4l.h28 driver which handles device video processing. This interface is
/linux-4.1.27/drivers/staging/rtl8188eu/include/
H A Drtw_ht.h37 /* for processing Tx A-MPDU */
/linux-4.1.27/arch/tile/include/asm/
H A Dkgdb.h31 * in the registers sent for correct processing in the host-side gdb.
/linux-4.1.27/arch/s390/include/asm/
H A Dcrw.h2 * Data definitions for channel report processing
H A Dnmi.h18 __u32 pd : 1; /* 01 instruction-processing damage */
/linux-4.1.27/net/sunrpc/
H A Dbc_svc.c26 * They implement the transport level processing required to send the
/linux-4.1.27/drivers/scsi/lpfc/
H A Dlpfc_disc.h162 #define NLP_IN_DEV_LOSS 0x00000001 /* Dev Loss processing in progress */
192 * processing is needed. Each list holds the nodes that require a PLOGI or
220 * and put on the unmapped list. For ADISC processing, the node is taken off
243 * funnelled thru the state machine. As each node finishes ADISC processing, it
244 * starts ADISC for any nodes waiting for ADISC processing. If no nodes are
250 * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
251 * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
/linux-4.1.27/drivers/hwtracing/coresight/
H A Dof_coresight.c140 * No need to deal with input ports, processing for as of_get_coresight_platform_data()
141 * processing for output ports will deal with them. of_get_coresight_platform_data()
/linux-4.1.27/drivers/iio/imu/inv_mpu6050/
H A Dinv_mpu_acpi.c2 * inv_mpu_acpi: ACPI processing for creating client devices
160 /* Add more matched product processing here */ inv_mpu_acpi_create_mux_client()
/linux-4.1.27/drivers/s390/cio/
H A Dqdio_thinint.c163 /* avoid dsci clear here, done after processing */ for_each_input_queue()
171 * Call inbound processing but not directly for_each_input_queue()
H A Dccwgroup.c189 /* Prevent concurrent online/offline processing and ungrouping. */ ccwgroup_ungroup_store()
632 /* Get ccwgroup device reference for local processing. */ ccwgroup_remove_ccwdev()
637 /* Release ccwgroup device reference for local processing. */ ccwgroup_remove_ccwdev()
/linux-4.1.27/drivers/input/joystick/
H A Dstinger.c92 * are ready for us. We then buffer them for further processing, or call the
93 * packet processing routine.
H A Dwarrior.c94 * are ready for us. We then buffer them for further processing, or call the
95 * packet processing routine.
H A Dtwidjoy.c133 * are ready for us. We then buffer them for further processing, or call the
134 * packet processing routine.
H A Dzhenhua.c105 * are ready for us. We then buffer them for further processing, or call the
106 * packet processing routine.
H A Dmagellan.c65 * processing.
/linux-4.1.27/drivers/char/
H A Dbfin-otp.c57 stamp("processing page %i (0x%x:%s)", page, flags, bfin_otp_read()
149 stamp("processing page %i (0x%x:%s) from %p", page, flags, bfin_otp_write()
/linux-4.1.27/drivers/char/mwave/
H A Dmwavedd.h136 unsigned long ulIPCSource_ISR; /* IPC source bits for recently processed intr, set during ISR processing */
137 unsigned long ulIPCSource_DPC; /* IPC source bits for recently processed intr, set during DPC processing */
/linux-4.1.27/drivers/acpi/
H A Dacpi_lpat.c2 * acpi_lpat.c - LPAT table processing functions
94 * be freed by the caller when finished processing, using a call to
/linux-4.1.27/include/uapi/linux/
H A Dmroute.h142 #define IGMPMSG_WRONGVIF 2 /* For PIM assert processing (unused) */
143 #define IGMPMSG_WHOLEPKT 3 /* For PIM Register processing */
/linux-4.1.27/arch/mips/pmcs-msp71xx/
H A Dmsp_irq_cic.c89 * we were processing the IRQ. unmask_cic_irq()
191 /* CIC masked by CIC vector processing before dispatch called */ msp_cic_irq_dispatch()
/linux-4.1.27/arch/powerpc/kvm/
H A Dfpu.S108 * Beginning of double instruction processing
132 * End of double instruction processing
H A Dbook3s_xics.h86 /* Counters for handling ICP processing in real mode */
/linux-4.1.27/arch/m68k/include/asm/
H A Dmac_iop.h46 #define IOP_MSG_RCVD 2 /* message received; processing */
47 #define IOP_MSG_COMPLETE 3 /* message processing complete */
/linux-4.1.27/net/ipv6/
H A Dipcomp6.c25 * The compression of IP datagram MUST be done before AH/ESP processing,
30 * AH/ESP processing.
/linux-4.1.27/net/mac80211/
H A Drc80211_minstrel.h141 * enable fixed rate processing per RC
143 * - write -1 to enable RC processing again
/linux-4.1.27/include/linux/mfd/
H A Dti_am335x_tscadc.h139 * time in us for processing a single channel, calculated as follows:
148 * processing time: 376 * 308ns = 116us
/linux-4.1.27/drivers/staging/lustre/include/linux/libcfs/linux/
H A Dlinux-cpu.h53 /** virtual processing unit */
/linux-4.1.27/arch/metag/tbx/
H A Dtbiroot.S11 * interrupt and background processing on the current thread.
/linux-4.1.27/include/scsi/
H A Dscsi_eh.h14 * format into one structure to ease application processing.
H A Dscsi_transport_srp.h94 * @it_nexus_response: Callback function for processing an IT nexus response.
/linux-4.1.27/include/trace/events/
H A Dmodule.h5 * variable that define_trace.h is processing, so we only set it
H A Dv4l2.h60 /* V4L2_TC_TYPE_* are macros, not defines, they do not need processing */
/linux-4.1.27/include/video/
H A Dudlfb.h59 atomic_t cpu_kcycles_used; /* transpired during pixel processing */
/linux-4.1.27/arch/mips/include/asm/
H A Dvpe.h102 struct list_head vpe_list; /* Virtual processing elements */
/linux-4.1.27/Documentation/mic/mpssd/
H A Dmicctrl23 # description: start MPSS stack processing.
H A Dmpss23 # description: start MPSS stack processing.
/linux-4.1.27/lib/
H A Dargv_split.c50 * quote processing is performed. Multiple whitespace characters are
H A Ddynamic_queue_limits.c45 * may have becomes starved between completion processing dql_completed()
/linux-4.1.27/drivers/misc/ibmasm/
H A Dibmasm.h167 /* command processing */
173 /* event processing */
199 /* low level message processing */
/linux-4.1.27/drivers/net/wireless/mwifiex/
H A Dsta_rx.c81 * The completion callback is called after processing in complete.
178 * received buffer to ensure its a valid packet, before processing it
184 * The completion callback is called after processing in complete.
/linux-4.1.27/drivers/scsi/bnx2fc/
H A Dbnx2fc_constants.h102 * start processing the task. In case no timer facilities are required then the
112 * start processing the task. In case no timer facilities are required then the
116 /* Task is under abort procedure. Updated in order to stop processing of
H A Dbnx2fc_io.c2 * IO manager and SCSI IO processing.
144 "ABTS processing\n"); bnx2fc_cmd_timeout()
177 * path. If els compl path is processing this IO, we bnx2fc_cmd_timeout()
1196 /* Hold IO request across abort processing */ bnx2fc_eh_abort()
1232 * Only eh_abort processing will remove the IO from bnx2fc_eh_abort()
1233 * active_cmd_q before processing the request. this is bnx2fc_eh_abort()
1236 * processing bnx2fc_eh_abort()
1247 "already in abts processing\n", io_req->xid); bnx2fc_eh_abort()
1375 BNX2FC_IO_DBG(io_req, "Timer context finished processing" bnx2fc_process_abts_compl()
1536 * processing. bnx2fc_process_tm_compl()
1917 BNX2FC_IO_DBG(io_req, "Timer context finished processing " bnx2fc_process_scsi_cmd_compl()
/linux-4.1.27/drivers/gpu/drm/nouveau/
H A Dnouveau_dma.c61 * just be processing an operation that takes a long time READ_GET()
195 * PFIFO is processing a buffer called from the main ring, nouveau_dma_wait()
225 * after processing the currently pending commands. nouveau_dma_wait()
/linux-4.1.27/include/net/sctp/
H A Dcommand.h59 SCTP_CMD_ECN_CE, /* Do delayed CE processing. */
60 SCTP_CMD_ECN_ECNE, /* Do delayed ECNE processing. */
61 SCTP_CMD_ECN_CWR, /* Do delayed CWR processing. */
H A Dulpqueue.h57 /* Add a new DATA chunk for processing. */
/linux-4.1.27/arch/mips/include/uapi/asm/
H A Dtermbits.h99 #define OPOST 0000001 /* Perform output processing. */
191 #define ICANON 0000002 /* Do erase and kill processing. */
206 #define EXTPROC 0200000 /* External processing on pty */
/linux-4.1.27/arch/powerpc/kernel/
H A Deeh_event.c31 * however, the recovery processing needs to occur asynchronously
48 * of the interrupt handler, and re-dispatch them for processing
99 * This routine is called to start the kernel thread for processing
/linux-4.1.27/arch/arm64/net/
H A Dbpf_jit.h142 /* Data-processing (1 source) */
150 /* Data-processing (2 source) */
159 /* Data-processing (3 source) */
/linux-4.1.27/arch/cris/arch-v32/mm/
H A Dmmu.S117 3: ; Probably not in a loop, continue normal processing
149 ba 3b ; Continue normal processing
157 ba 3b ; Continue normal processing
/linux-4.1.27/include/crypto/
H A Dhash.h71 * transformation. No data processing happens at this point.
79 * transformation object. Data processing can happen synchronously
83 * pushes it back to upper layers. No data processing happens at this
89 * processing can happen synchronously [SHASH] or asynchronously [AHASH]
95 * the whole transformation in one run. Data processing can happen
109 * processing happens at this point.
114 * processing certain amount of data and reload this partial result
115 * multiple times later on for multiple re-use. No data processing
120 * data processing happens at this point.
457 * crypto_ahash_update() - add data to message digest for processing
546 * CRYPTO_TFM_REQ_MAY_SLEEP the request processing may sleep
811 * crypto_shash_update() - add data to message digest for processing
/linux-4.1.27/fs/nfsd/
H A Dxdr4.h245 bool op_truncate; /* used during processing */
246 bool op_created; /* used during processing */
247 struct nfs4_openowner *op_openowner; /* used during processing */
248 struct nfs4_file *op_file; /* used during processing */
249 struct nfs4_ol_stateid *op_stp; /* used during processing */
250 struct nfs4_clnt_odstate *op_odstate; /* used during processing */
565 * Memory needed just for the duration of processing one compound:
H A Dnetns.h60 * used in reboot/reset lease grace period processing
/linux-4.1.27/include/uapi/linux/genwqe/
H A Dgenwqe_card.h347 __u16 retc; /* returned from processing */
348 __u16 attn; /* attention code from processing */
349 __u32 progress; /* progress code from processing */
413 __u16 retc; /* return code from processing */
415 __u16 attn; /* attention code from processing */
417 __u32 progress; /* progress code from processing */
421 __u64 disp_ts; /* SW processing start */
/linux-4.1.27/drivers/base/power/
H A Dwakeup.c362 * carry out the entire processing of it and possibly will pass it to user space
363 * for further processing. In that case the functional unit that has detected
372 * advance what's going to happen to the event during processing. This
458 * to be called directly after processing the event (and possibly passing it to
459 * user space for further processing).
542 * __pm_relax - Notify the PM core that processing of a wakeup event has ended.
545 * Call this function for wakeup events whose processing started with calling
565 * pm_relax - Notify the PM core that processing of a wakeup event has ended.
610 * @msec: Anticipated event processing time (in milliseconds).
654 * @msec: Anticipated event processing time (in milliseconds).
/linux-4.1.27/net/sctp/
H A Dsm_sideeffect.c78 /* A helper function for delayed processing of INET ECN CE bit. */ sctp_do_ecn_ce_work()
88 /* Helper function for delayed processing of SCTP ECNE chunk. */
142 /* Helper function to do delayed processing of ECN CWR chunk. */ sctp_do_ecn_cwr_work()
607 * inside the cookie. In reality, this is only used for INIT-ACK processing
621 * fail during INIT processing (due to malloc problems), sctp_cmd_process_init()
622 * just return the error and stop processing the stack. sctp_cmd_process_init()
1092 * This is the master state machine processing function.
1134 * This the master state function side effect processing function.
1345 * Note: Only used during INIT-ACK processing. If sctp_cmd_interpreter()
1459 /* Do delayed CE processing. */ sctp_cmd_interpreter()
1464 /* Do delayed ECNE processing. */ sctp_cmd_interpreter()
1473 /* Do delayed CWR processing. */ sctp_cmd_interpreter()
1634 /* Dummy up a SACK for processing. */ sctp_cmd_interpreter()
H A Dinqueue.c88 * or from the backlog processing. sctp_inq_push()
133 * Any post processing work to do before we move on? sctp_inq_pop()
H A Dendpointola.c401 /* Do delayed input processing. This is scheduled by sctp_rcv().
432 * processing specified in Section 6.3 of SCTP-AUTH spec sctp_endpoint_bh_rcv()
444 * processing). sctp_endpoint_bh_rcv()
/linux-4.1.27/drivers/staging/skein/
H A Dskein_base.h180 #define SKEIN_BLK_TYPE_MSG (48) /* message processing */
192 #define SKEIN_T1_BLK_TYPE_MSG SKEIN_T1_BLK_TYPE(MSG) /* message processing */
230 /* use as tree_info in InitExt() call for sequential processing */
/linux-4.1.27/drivers/block/aoe/
H A Daoedev.c130 * kthread processing I'm no longer confident that we can
134 * frames sitting on the iocq. When the kthreads finish processing
393 * driver changing link and not processing its transmit ring. The
H A Daoenet.c174 /* ata_rsp may keep skb for later processing or give it back */ aoenet_rcv()
/linux-4.1.27/drivers/isdn/pcbit/
H A Dpcbit.h53 processing */
/linux-4.1.27/drivers/mtd/nand/
H A Domap_elm.c249 * elm_start_processing - start elm syndrome processing
255 * to start processing syndrome vectors.
283 * On completion of processing by elm module, error location status
360 /* Enable syndrome processing for which syndrome fragment is updated */ elm_decode_bch_error_page()
/linux-4.1.27/drivers/media/usb/gspca/stv06xx/
H A Dstv06xx_hdcs.c84 /* Column processing overhead */
182 /* Column processing period */ hdcs_set_exposure()
184 /* Row processing period */ hdcs_set_exposure()
187 within the column processing period */ hdcs_set_exposure()
/linux-4.1.27/drivers/scsi/bnx2i/
H A D57xx_iscsi_constants.h114 /* IP/TCP processing errors: */
H A Dbnx2i_hwi.c261 * bnx2i_ring_sq_dbell - Ring SQ doorbell to wake-up the processing engine
328 * a WQE to sent to chip for further processing
383 * a WQE to sent to chip for further processing
459 * a WQE to sent to chip for further processing
509 * a WQE to sent to chip for further processing
531 * a WQE to sent to chip for further processing
598 * a WQE to sent to chip for further processing
738 * a WQE to sent to chip for further processing
1349 * @cqe: pointer to newly DMA'ed CQE entry for processing
1446 * @cqe: pointer to newly DMA'ed CQE entry for processing
1514 * @cqe: pointer to newly DMA'ed CQE entry for processing
1575 * @cqe: pointer to newly DMA'ed CQE entry for processing
1613 * @cqe: pointer to newly DMA'ed CQE entry for processing
1660 * @cqe: pointer to newly DMA'ed CQE entry for processing
1701 * @cqe: pointer to newly DMA'ed CQE entry for processing
1753 * @cqe: pointer to newly DMA'ed CQE entry for processing
1803 * @cqe: pointer to newly DMA'ed CQE entry for processing
1840 * @cqe: pointer to newly DMA'ed CQE entry for processing
/linux-4.1.27/drivers/infiniband/ulp/srpt/
H A Dib_srpt.h171 * @SRPT_STATE_DONE: Command processing finished successfully, command
172 * processing has been aborted or command processing
346 * @mad_agent: per-port management datagram processing information.
/linux-4.1.27/drivers/clk/ti/
H A Dautoidle.c101 * to the autoidle list for later processing. Returns 0 on success,
/linux-4.1.27/drivers/usb/class/
H A Dcdc-acm.h59 * when processing onlcr, so we only need 2 buffers. These values must be
/linux-4.1.27/drivers/usb/host/
H A Dohci-mem.c71 /* ohci "done list" processing needs this mapping */
H A Dohci-omap3.c153 * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
H A Dohci-sa1111.c228 * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
/linux-4.1.27/include/trace/
H A Ddefine_trace.h115 /* We may be processing more files */
/linux-4.1.27/include/media/davinci/
H A Dvpss.h18 * vpss - video processing subsystem module header file.
/linux-4.1.27/include/xen/interface/
H A Dsched.h36 * Block execution of this VCPU until an event is received for processing.
/linux-4.1.27/arch/powerpc/include/asm/
H A Ddbdma.h61 #define DBDMA_STOP 0x7000 /* suspend processing */
H A Dpte-44x.h10 * are easily loaded during exception processing. I decided to
/linux-4.1.27/arch/avr32/mach-at32ap/
H A Dintc.c75 * interrupts during softirq processing. If this is a nested do_IRQ()
/linux-4.1.27/arch/ia64/include/asm/
H A Dasmmacro.h70 * path (ivt.S - TLB miss processing) or in places where it might not be
H A Dthread_info.h101 #define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */
/linux-4.1.27/arch/arm/probes/
H A Ddecode-thumb.c77 /* Data-processing (shifted register) */
137 /* Data-processing (modified immediate) */
189 /* Data-processing (plain binary immediate) */
392 /* Data-processing (register) */
570 * Data-processing (shifted register)
582 * Data-processing (modified immediate)
588 * Data-processing (plain binary immediate)
620 * Data-processing (register)
722 * 16-bit Thumb data-processing instructions
/linux-4.1.27/arch/arm/include/asm/
H A Dkgdb.h64 * present in the registers sent for correct processing in
/linux-4.1.27/fs/fscache/
H A Doperation.c24 * fscache_enqueue_operation - Enqueue an operation for processing
27 * Enqueue an operation for processing by the FS-Cache thread pool.
262 * Jump start the operation processing on an object. The caller must hold
510 * execute an operation using fs_op_wq to provide processing context -
/linux-4.1.27/net/x25/
H A Dx25_timer.c19 * Centralised disconnection processing.
/linux-4.1.27/drivers/iio/light/
H A Dhid-sensor-als.c258 /* Function to initialize the processing for usage id */ hid_als_probe()
348 /* Function to deinitialize the processing for usage id */ hid_als_remove()
H A Dhid-sensor-prox.c246 /* Function to initialize the processing for usage id */ hid_prox_probe()
337 /* Function to deinitialize the processing for usage id */ hid_prox_remove()
/linux-4.1.27/drivers/iio/orientation/
H A Dhid-sensor-rotation.c217 /* Function to initialize the processing for usage id */ hid_dev_rot_probe()
309 /* Function to deinitialize the processing for usage id */ hid_dev_rot_remove()
H A Dhid-sensor-incl-3d.c310 /* Function to initialize the processing for usage id */ hid_incl_3d_probe()
404 /* Function to deinitialize the processing for usage id */ hid_incl_3d_remove()
/linux-4.1.27/drivers/iio/pressure/
H A Dhid-sensor-press.c255 /* Function to initialize the processing for usage id */ hid_press_probe()
347 /* Function to deinitialize the processing for usage id */ hid_press_remove()
/linux-4.1.27/drivers/net/irda/
H A Dvlsi_ir.h180 VLSI_PIO_PROMPT = 0x08, /* triggers ring processing (u16, wo) */
250 * processing state machine.
285 /* writing any value kicks the ring processing state machines
290 * their processing
660 * in the middle doing the processing.
663 * producer advances r->tail after inserting for processing
678 /* ring processing helpers */
739 * post-processing in vlsi_process_tx/rx() after it was completed
/linux-4.1.27/drivers/scsi/arm/
H A Dacornscsi.h211 INTR_PROCESSING, /* interrupt routine still processing */
279 struct scsi_cmnd *SCpnt; /* currently processing command */
/linux-4.1.27/drivers/gpu/drm/gma500/
H A Dpower.c122 * Perform the suspend processing on our PCI device state
151 * Perform the resume processing on our PCI device state - rewrite
/linux-4.1.27/drivers/crypto/ccp/
H A Dccp-dev.h159 /* Queue processing thread */
221 * CCP that are available for processing cmds
/linux-4.1.27/drivers/hv/
H A Dhv_snapshot.c196 * We will defer processing this callback once hv_vss_onchannelcallback()
291 * Defer processing channel callbacks until the daemon hv_vss_init()
H A Dhv_fcopy.c47 * ensure this by serializing packet processing in this driver - we do not
223 * We will defer processing this callback once hv_fcopy_onchannelcallback()
428 * Defer processing channel callbacks until the daemon hv_fcopy_init()
/linux-4.1.27/include/linux/sunrpc/
H A Dsvcauth.h94 * further processing is necessary. (This is used for processing
/linux-4.1.27/include/media/
H A Dsaa7146_vv.h47 int v_offset; /* number of lines of vertical offset before processing */
50 int h_offset; /* horizontal offset of processing window */
/linux-4.1.27/arch/s390/kernel/
H A Dnmi.c273 s390_handle_damage("processing backup machine " s390_do_machine_check()
293 s390_handle_damage("received instruction processing " s390_do_machine_check()
/linux-4.1.27/arch/powerpc/oprofile/cell/
H A Dspu_profiler.c151 /* There should only be one kernel thread at a time processing for_each_online_cpu()
152 * the samples. In the very unlikely case that the processing for_each_online_cpu()
/linux-4.1.27/arch/frv/kernel/
H A Dentry-table.S28 # exception processing. We have three different tables for the three
36 # exception processing. The prologue then jumps to the handler in this
/linux-4.1.27/fs/btrfs/
H A Ddelayed-ref.h113 unsigned int processing:1; member in struct:btrfs_delayed_ref_head
146 /* total number of head nodes ready for processing */
/linux-4.1.27/net/irda/
H A Dirda_device.c182 * processing, and notify the parent task, that is waiting for this task
215 /* Do post processing */ irda_task_kick()
/linux-4.1.27/tools/usb/
H A Dhcd-tests.sh9 # - unlink: needs bulk sink and/or src, test HCD unlink processing
141 # try to trigger short OUT processing bugs
/linux-4.1.27/drivers/isdn/gigaset/
H A Dasyncdata.c173 /* end of buffer, save for later processing */ hdlc_loop()
336 * inputstate flag and resumes processing of the sequence on the next call.
343 return; /* no DLE processing in lock mode */ handle_dle()
353 /* end of buffer, save for later processing */ handle_dle()
421 gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes); gigaset_m10x_input()
/linux-4.1.27/drivers/staging/lustre/lustre/obdclass/
H A Dllog_cat.c542 CDEBUG(D_HA, "processing log "DOSTID":%x at index %u of catalog " llog_cat_process_cb()
555 /* Skip processing of the logs until startcat */ llog_cat_process_cb()
564 /* Continue processing the next log from idx 0 */ llog_cat_process_cb()
638 CDEBUG(D_HA, "processing log "DOSTID":%x at index %u of catalog " llog_cat_reverse_process_cb()
767 CDEBUG(D_HA, "processing log "DOSTID":%x at index %u of catalog " cat_cancel_cb()
/linux-4.1.27/arch/x86/crypto/sha-mb/
H A Dsha1_mb.c219 * If it is not ready, resubmit the job to finish processing. sha1_ctx_mgr_get_comp_ctx()
221 * Otherwise, all jobs currently being managed by the hash_ctx_mgr still need processing. sha1_ctx_mgr_get_comp_ctx()
247 /* Cannot submit to a currently processing job. */ sha1_ctx_mgr_submit()
335 * If flush returned a job, resubmit the job to finish processing. sha1_ctx_mgr_flush()
342 * still need processing. Loop. sha1_ctx_mgr_flush()
/linux-4.1.27/kernel/
H A Dsoftirq.c83 * softirq processing.
86 * This lets us distinguish between whether we are currently processing
139 * without processing still-pending softirqs:
161 * softirq processing: __local_bh_enable_ip()
182 * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
/linux-4.1.27/drivers/scsi/esas2r/
H A Desas2r_init.c1430 * deferred processing. Note that the count is already zero esas2r_init_adapter_hw()
1469 /* Do any deferred processing */ esas2r_init_adapter_hw()
1486 * For cases where (a) the initialization messages processing may esas2r_init_adapter_hw()
1523 /* Enable deferred processing after the first initialization. */ esas2r_init_adapter_hw()
1603 * Perform power management processing including managing device states, adapter
1655 /* Suspend I/O processing. */ esas2r_power_down()
1668 * Perform power management processing including managing device states, adapter
/linux-4.1.27/drivers/memstick/core/
H A Dmemstick.c322 * interrupt context. Return value of 0 means that request processing is still
508 * memstick_add_host - start request processing on memstick host
544 * memstick_remove_host - stop request processing on memstick host
/linux-4.1.27/drivers/oprofile/
H A Dbuffer_sync.c13 * global event buffer. Such processing is necessary
16 * The processing does the job of converting the
48 * list for processing. Only after two full buffer syncs
/linux-4.1.27/drivers/pci/hotplug/
H A Dcpci_hotplug_core.c353 /* Trigger processing by the event thread */ cpci_hp_intr()
692 /* Start enum interrupt processing */ cpci_hp_start()
707 /* Stop enum interrupt processing */ cpci_hp_stop()
/linux-4.1.27/drivers/net/wireless/ath/wil6210/
H A Dfw_inc.c145 wmb(); /* finish before processing next record */ fw_handle_data()
179 wmb(); /* finish before processing next record */ fw_handle_fill()
230 wmb(); /* finish before processing next record */ fw_handle_direct_write()
/linux-4.1.27/drivers/cpufreq/
H A Dgx-suspmod.c135 * is suspended -- processing power is just 0.39% of what it used to be,
140 /* For the default policy, we want at least some processing power
351 * specific processing capacity. cpufreq_gx_verify()
/linux-4.1.27/drivers/uwb/
H A Dwhc-rc.c149 * has been retired. This means we can be sure that event processing
152 * There's no need to wait for the event processing to start as the
330 * Disable interrupts and cancel any pending event processing work
/linux-4.1.27/include/linux/netfilter/
H A Dx_tables.h278 * Packet processing changes the seqcount only if no recursion happened
288 * Begin packet processing : all readers must wait the end
320 * End packet processing : all readers can proceed
/linux-4.1.27/drivers/iio/common/hid-sensors/
H A Dhid-sensor-trigger.c219 MODULE_DESCRIPTION("HID Sensor trigger processing");
/linux-4.1.27/drivers/net/ethernet/intel/i40e/
H A Di40e_adminq.h52 /* used for interrupt processing */
/linux-4.1.27/drivers/net/ethernet/intel/i40evf/
H A Di40e_adminq.h52 /* used for interrupt processing */
/linux-4.1.27/drivers/media/pci/cx18/
H A Dcx18-mailbox.c270 * Simple integrity check for processing a stale (and possibly epu_dma_done()
423 "while processing\n", mb_ack_irq()
559 "incoming mailbox command processing\n"); cx18_api_epu_cmd_irq()
586 * Individual EPU command processing is responsible for ack-ing cx18_api_epu_cmd_irq()
/linux-4.1.27/drivers/net/wimax/i2400m/
H A Dusb-rx.c39 * - Use skb_clone(), break up processing in chunks
60 * - RX data processing can get heavy enough so that it is not
320 * code for processing.
322 * When done processing, it runs some dirty statistics to verify if
/linux-4.1.27/drivers/net/wireless/ath/ath6kl/
H A Ddebug.h32 ATH6KL_DBG_IRQ = BIT(7), /* interrupt processing */
/linux-4.1.27/drivers/net/wireless/orinoco/
H A Dcfg.c157 /* On error the we aren't processing the request */ orinoco_scan()
/linux-4.1.27/drivers/net/wireless/rt2x00/
H A Drt2800mmio.c273 * processing here and drop the tx status rt2800mmio_txdone()
282 * The queue is empty. Stop processing here rt2800mmio_txdone()
432 * interrupt fires again during tx status processing). rt2800mmio_txstatus_interrupt()
453 /* Schedule the tasklet for processing the tx status. */ rt2800mmio_txstatus_interrupt()
H A Drt2x00mmio.c90 * Send the frame to rt2x00lib for further processing. rt2x00mmio_rxdone()
/linux-4.1.27/drivers/scsi/bfa/
H A Dbfa_modules.h120 bfa_boolean_t queue_process; /* queue processing enabled */
H A Dbfa_ioc_cb.c220 * Synchronized IOC failure processing routines
259 * Synchronized IOC failure processing routines
/linux-4.1.27/drivers/scsi/libsas/
H A Dsas_event.c2 * Serial Attached SCSI (SAS) Event processing
/linux-4.1.27/drivers/staging/iio/
H A Diio_simple_dummy_buffer.c62 * buffer without processing. iio_simple_dummy_trigger_h()
/linux-4.1.27/drivers/staging/rtl8712/
H A Drtl871x_io.c119 INIT_LIST_HEAD(&pio_queue->processing); r8712_alloc_io_queue()
H A Dxmit_linux.c95 /* "When priority processing of data frames is supported, r8712_set_qos()
/linux-4.1.27/drivers/staging/rts5208/
H A Drtsx_transport.c165 * short-circuit all other processing rtsx_invoke_transport()
197 /* Error and abort processing: try to resynchronize with the device rtsx_invoke_transport()
724 /* don't transfer data during abort processing */ rtsx_transfer_data_partial()
753 /* don't transfer data during abort processing */ rtsx_transfer_data()
/linux-4.1.27/drivers/staging/speakup/
H A Dspeakup_audptr.c31 #define PROCSPEECH '\r' /* start synth processing speech char */
/linux-4.1.27/drivers/gpio/
H A Dgpio-sa1100.c184 * We will be processing them all. sa1100_gpio_handler()
/linux-4.1.27/drivers/crypto/
H A Dn2_core.h136 * Configure a queue in the stream processing unit.
/linux-4.1.27/arch/x86/kernel/
H A Dirq_32.c115 * allocate per-cpu stacks for hardirq and for softirq processing
/linux-4.1.27/block/
H A Dblk-iopoll.c118 * easily just stop processing, they have to complete an blk_iopoll_softirq()
/linux-4.1.27/arch/sh/kernel/
H A Dirq.c116 * allocate per-cpu stacks for hardirq and for softirq processing
/linux-4.1.27/drivers/atm/
H A DuPD98402.h60 #define uPD98402_MDR_HEC 0x20 /* disable HEC inbound processing */
/linux-4.1.27/drivers/gpu/drm/udl/
H A Dudl_drv.h67 atomic_t cpu_kcycles_used; /* transpired during pixel processing */
/linux-4.1.27/include/net/caif/
H A Dcaif_hsi.h116 /* Structure holds status of received CAIF frames processing */
/linux-4.1.27/arch/mips/mm/
H A Dcex-sb1.S88 * processing. For now, they are considered "unrecoverable".
/linux-4.1.27/arch/blackfin/include/asm/
H A Dtraps.h98 level " - For example, an exception generated while processing a previous exception.\n"
/linux-4.1.27/arch/ia64/oprofile/
H A Dbacktrace.c99 * happen when timer interrupt fires while processing do_ia64_backtrace()
/linux-4.1.27/arch/m68k/mac/
H A Diop.c71 * receives the message and then to MSG_COMPLETE when the message processing
79 * and then to MSG_COMPLETE when processing is completed and the reply (if any)
102 * message processing to a bottom-half handler if the processing will take
/linux-4.1.27/arch/alpha/kernel/
H A Dsys_eb64p.c167 * comes in on. This makes interrupt processing much easier.
H A Dsys_mikasa.c145 * comes in on. This makes interrupt processing much easier.
/linux-4.1.27/fs/fuse/
H A Dfuse_i.h197 * processing
255 /** The request IO state (for asynchronous processing) */
282 /** This can be on either pending processing or io lists in
430 struct list_head processing; member in struct:fuse_conn
/linux-4.1.27/net/caif/
H A Dcfserl.c24 /* Protects parallel processing of incoming packets */
/linux-4.1.27/lib/zlib_inflate/
H A Dinflate.h74 int last; /* true if processing last block */
/linux-4.1.27/scripts/tracing/
H A Ddraw_functrace.py91 we want to stop the processing and ignore this line.
/linux-4.1.27/tools/perf/tests/
H A Dbp_signal.c139 * Following processing should happen: test__bp_signal()
/linux-4.1.27/tools/thermal/tmon/
H A Dtmon.h47 /* use fixed size record to simplify data processing and transfer
/linux-4.1.27/drivers/iio/accel/
H A Dhid-sensor-accel-3d.c294 /* Function to initialize the processing for usage id */ hid_accel_3d_probe()
387 /* Function to deinitialize the processing for usage id */ hid_accel_3d_remove()
/linux-4.1.27/drivers/iio/gyro/
H A Dhid-sensor-gyro-3d.c293 /* Function to initialize the processing for usage id */ hid_gyro_3d_probe()
384 /* Function to deinitialize the processing for usage id */ hid_gyro_3d_remove()
/linux-4.1.27/drivers/iio/magnetometer/
H A Dhid-sensor-magn-3d.c412 /* Function to initialize the processing for usage id */ hid_magn_3d_probe()
498 /* Function to deinitialize the processing for usage id */ hid_magn_3d_remove()
/linux-4.1.27/drivers/mmc/host/
H A Dsh_mmcif.c20 * The MMCIF driver is now processing MMC requests asynchronously, according
24 * data, and optional stop. To achieve asynchronous processing each of these
28 * control to the caller, leaving all further processing to run asynchronously.
29 * All further request processing is performed by the bottom halves.
37 * processing completion, the MMC core is informed and the request processing is
38 * finished. In case processing has to continue, i.e., if data has to be read
1194 * All handlers return true, if processing continues, and false, if the sh_mmcif_irqt()
/linux-4.1.27/drivers/media/pci/cx23885/
H A Dcimax2.c352 /* CAM module IRQ processing. fast operation */ netup_read_ci_status()
355 /* CAM module INSERT/REMOVE processing. slow operation because of i2c netup_read_ci_status()
/linux-4.1.27/drivers/media/platform/s3c-camif/
H A Dcamif-core.h185 * struct camif_vp - CAMIF data processing path structure (codec/preview)
238 /* Video processing path enumeration */
/linux-4.1.27/drivers/media/rc/
H A Drc-ir-raw.c148 * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
157 * processing.
/linux-4.1.27/drivers/misc/mei/
H A Dhw-txe-regs.h100 * This register indicates whether or not processing of
276 * This register indicates whether or not processing of the most recent

Completed in 8787 milliseconds

123456789