| /linux-4.4.14/Documentation/devicetree/bindings/media/ |
| D | gpio-ir-receiver.txt | 1 Device-Tree bindings for GPIO IR receiver
4 - compatible: should be "gpio-ir-receiver".
12 ir: ir-receiver {
13 compatible = "gpio-ir-receiver";
|
| D | meson-ir.txt | 1 * Amlogic Meson IR remote control receiver
10 ir-receiver@c8100480 {
|
| D | samsung-mipi-csis.txt | 1 Samsung S5P/EXYNOS SoC series MIPI CSI-2 receiver (MIPI CSIS)
46 - samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
|
| D | samsung-s5k6a3.txt | 27 used to specify link to the image data receiver. The S5K6A3(YX) device
|
| D | samsung-s5c73m3.txt | 37 to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
|
| D | video-interfaces.txt | 1 Common bindings for video receiver and transmitter interfaces
124 imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
|
| /linux-4.4.14/Documentation/ |
| D | md-cluster.txt | 79 sender receiver receiver
84 sender receiver receiver
96 [ wait until all receiver has *processed* the MESSAGE ]
99 receiver get CR of MESSAGE
100 receiver read LVB
101 receiver processes the message
103 receiver release ACK
105 sender receiver receiver
115 receiver upconvert to PR of MESSAGE
116 receiver get CR of ACK
[all …]
|
| D | IPMI.txt | 285 This gives the receiver a place to actually put the message.
697 an event generator, the event receiver from the local management
|
| D | devices.txt | 1518 82 char WiNRADiO communications receiver card
|
| /linux-4.4.14/net/netfilter/ |
| D | nf_conntrack_proto_tcp.c | 512 struct ip_ct_tcp_state *receiver = &state->seen[!dir]; in tcp_in_window() local
526 if (receiver->flags & IP_CT_TCP_FLAG_SACK_PERM) in tcp_in_window()
543 receiver->td_end, receiver->td_maxend, receiver->td_maxwin, in tcp_in_window()
544 receiver->td_scale); in tcp_in_window()
566 && receiver->flags & IP_CT_TCP_FLAG_WINDOW_SCALE)) in tcp_in_window()
568 receiver->td_scale = 0; in tcp_in_window()
587 if (receiver->td_maxwin == 0) in tcp_in_window()
588 receiver->td_end = receiver->td_maxend = sack; in tcp_in_window()
611 ack = sack = receiver->td_end; in tcp_in_window()
619 ack = sack = receiver->td_end; in tcp_in_window()
[all …]
|
| /linux-4.4.14/drivers/media/usb/dvb-usb-v2/ |
| D | Kconfig | 29 Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
42 Say Y here to support the Afatech AF9035 based DVB USB receiver.
59 Anysee E30 C Plus DVB USB2.0 receiver.
67 Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
84 Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
92 Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
101 receiver with USB ID 0db0:5581.
125 Say Y here to support the MxL111SF USB2.0 DTV receiver.
142 Say Y here to support the Realtek RTL28xxU DVB USB receiver.
|
| /linux-4.4.14/drivers/media/usb/dvb-usb/ |
| D | Kconfig | 30 Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
106 Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
143 Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
155 Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
199 Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
211 Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and
212 the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The
220 Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver.
227 tristate "Opera1 DVB-S USB2.0 receiver"
232 Say Y here to support the Opera DVB-S USB2.0 receiver.
[all …]
|
| /linux-4.4.14/Documentation/devicetree/bindings/sound/ |
| D | spdif-receiver.txt | 1 Device-Tree bindings for dummy spdif receiver
8 codec: spdif-receiver {
|
| D | fsl-sai.txt | 42 receiver will send and receive data by following
43 receiver's bit clocks and frame sync clocks.
47 means both transimitter and receiver will send and
54 transimitter and receiver will send and receive data by following clocks
|
| D | armada-370db-audio.txt | 18 3/ the S/PDIF receiver
|
| /linux-4.4.14/Documentation/video4linux/ |
| D | si470x.txt | 22 - Si4700: FM radio receiver
23 - Si4701: FM radio receiver, RDS Support
24 - Si4702: FM radio receiver
25 - Si4703: FM radio receiver, RDS Support
26 - Si4704: FM radio receiver, no external antenna required
27 - Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O
28 - Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS
30 - Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support
|
| D | hauppauge-wintv-cx88-ir.txt | 38 I'm pretty sure when no IR signal is present the receiver is always in a
40 as well. Remember, this is a free running sample of the IR receiver state
|
| D | fimc.txt | 44 - MIPI-CSI2 receiver subdev
96 MIPI-CSI receiver device (currently up to two).
148 optional s5p-csis.ko (MIPI-CSI receiver subdev).
|
| D | vivid.txt | 6 defined radio receiver. In addition a simple framebuffer device is available for
34 - Radio receiver and transmitter support, including RDS support
86 radio receiver device, one radio transmitter device and one SDR device.
172 radio_rx_nr: give the desired radioX start number for each radio receiver device.
447 The radio receiver emulates an FM/AM/SW receiver. The FM band also supports RDS.
460 The FM receiver supports RDS as well, both using 'Block I/O' and 'Controls'
476 The receiver supports HW frequency seek, either in Bounded mode, Wrap Around
501 The SDR receiver has three frequency bands for the ADC tuner:
824 RDS Reception: set if the RDS receiver should be enabled.
885 Since radio is wireless this looping always happens if the radio receiver
[all …]
|
| D | omap3isp.txt | 58 All the blocks in the ISP, excluding the CSI-2 and possibly the CCP2 receiver,
|
| /linux-4.4.14/drivers/staging/media/lirc/ |
| D | Kconfig | 5 bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
9 RF receiver and transmitter drivers will be displayed. When paired
10 with a remote control and the lirc daemon, the receiver drivers
|
| /linux-4.4.14/net/can/ |
| D | af_can.c | 473 struct receiver *r; in can_rx_register()
522 struct receiver *r = container_of(rp, struct receiver, rcu); in can_rx_delete_receiver()
541 struct receiver *r = NULL; in can_rx_unregister()
604 static inline void deliver(struct sk_buff *skb, struct receiver *r) in deliver()
612 struct receiver *r; in can_rcv_filter()
909 rcv_cache = kmem_cache_create("can_receiver", sizeof(struct receiver), in can_init()
|
| D | af_can.h | 51 struct receiver { struct
|
| D | proc.c | 196 struct receiver *r; in can_print_rcvlist()
|
| /linux-4.4.14/arch/arm/boot/dts/ |
| D | dove-cubox.dts | 59 ir_recv: ir-receiver {
60 compatible = "gpio-ir-receiver";
|
| D | rk3188-radxarock.dts | 108 ir_recv: gpio-ir-receiver {
109 compatible = "gpio-ir-receiver";
347 ir-receiver {
|
| D | imx6qdl-cubox-i.dtsi | 47 ir_recv: ir-receiver {
48 compatible = "gpio-ir-receiver";
|
| D | imx6qdl-hummingboard.dtsi | 49 ir_recv: ir-receiver {
50 compatible = "gpio-ir-receiver";
|
| D | omap3-n950-n9.dtsi | 75 /* CSI-2 receiver */
|
| D | rk3066a-rayeager.dts | 55 ir: ir-receiver {
56 compatible = "gpio-ir-receiver";
|
| D | sun4i-a10-mini-xplus.dts | 95 /* The ir receiver is not always populated */
|
| D | rk3288-firefly.dtsi | 82 ir: ir-receiver {
83 compatible = "gpio-ir-receiver";
|
| D | rk3288-popmetal.dts | 98 ir: ir-receiver {
99 compatible = "gpio-ir-receiver";
|
| D | meson.dtsi | 148 ir_receiver: ir-receiver@c8100480 {
|
| D | imx6q-tbs2910.dts | 76 compatible = "gpio-ir-receiver";
|
| /linux-4.4.14/Documentation/blockdev/drbd/ |
| D | drbd-connection-state-overview.dot | 62 Unconnected -> WFConnection [ label="receiver thread is started" ]
83 CommTrouble -> Unconnected [label="receiver thread is stopped" ]
|
| /linux-4.4.14/drivers/media/usb/as102/ |
| D | Kconfig | 2 tristate "Abilis AS102 DVB receiver"
|
| /linux-4.4.14/drivers/media/usb/siano/ |
| D | Kconfig | 6 tristate "Siano SMS1xxx based MDTV receiver"
|
| /linux-4.4.14/Documentation/networking/ |
| D | ipsec.txt | 6 policy check on receiver.
38 will skip policy checking on receiver side.
|
| D | dccp.txt | 110 accepted by the receiver. Hence, when using this feature on the sender, it must
111 be enabled at the receiver, too with suitable choice of CsCov.
116 DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it
161 Default CCID for the sender-receiver half-connection. Depending on the
165 Default CCID for the receiver-sender half-connection; see tx_ccid.
|
| D | udplite.txt | 72 This option is the receiver-side analogue. It is truly optional, i.e. not
76 RTP and UDP headers are to be protected, a receiver can enforce that only
125 The receiver specifies the minimum value of the coverage length it
126 is willing to accept. A value of 0 here indicates that the receiver
138 On both sender and receiver, checksumming will always be performed
|
| D | baycom.txt | 42 is responsible for regenerating the receiver bit clock, as well as
49 The modem does all the filtering and regenerates the receiver clock.
|
| D | z8530drv.txt | 395 RxOver - number of receiver overruns
397 RxInts - number of receiver interrupts
399 EpInts - number of receiver special condition interrupts
|
| D | netconsole.txt | 22 Sender and receiver configuration:
|
| D | cxgb.txt | 159 receiver. Due to the variations of RTT, you may want to increase the buffer
|
| D | rds.txt | 183 ACK_REQUIRED - receiver must ack this packet
|
| D | cs89x0.txt | 432 receiver are operating properly. If this test fails, make sure the
|
| D | ip-sysctl.txt | 505 selected receiver buffers for TCP socket. This value does not override
1874 the rcvbuf_policy could be set to attribute the receiver buffer space
|
| D | rxrpc.txt | 903 transmit it again, assuming no ACK is received from the receiver telling
|
| /linux-4.4.14/Documentation/devicetree/bindings/media/i2c/ |
| D | adv7604.txt | 1 * Analog Devices ADV7604/11/12 video decoder with HDMI receiver
4 HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog
|
| D | nokia,smia.txt | 37 - remote-endpoint: A phandle to the bus receiver's endpoint node.
|
| /linux-4.4.14/Documentation/video4linux/cx88/ |
| D | hauppauge-wintv-cx88-ir.txt | 38 I'm pretty sure when no IR signal is present the receiver is always in a
40 as well. Remember, this is a free running sample of the IR receiver state
|
| /linux-4.4.14/sound/usb/6fire/ |
| D | comm.h | 26 struct urb receiver; member
|
| D | comm.c | 162 urb = &rt->receiver; in usb6fire_comm_init()
194 usb_poison_urb(&rt->receiver); in usb6fire_comm_abort()
|
| /linux-4.4.14/drivers/media/platform/exynos4-is/ |
| D | Kconfig | 32 tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
37 receiver (MIPI-CSIS) devices.
|
| /linux-4.4.14/drivers/media/rc/ |
| D | Kconfig | 115 a raw IR receiver in your system.
158 Say Y here to enable support for integrated infrared receiver
219 Say Y here to enable support for integrated infrared receiver
227 tristate "Amlogic Meson IR remote receiver"
231 Say Y if you want to use the IR remote receiver available
242 Say Y here to enable support for integrated infrared receiver
371 tristate "ST remote control receiver"
|
| /linux-4.4.14/ipc/ |
| D | mqueue.c | 922 struct ext_wait_queue *receiver) in pipelined_send() argument
924 receiver->msg = message; in pipelined_send()
925 list_del(&receiver->list); in pipelined_send()
926 wake_q_add(wake_q, receiver->task); in pipelined_send()
935 receiver->state = STATE_READY; in pipelined_send()
965 struct ext_wait_queue *receiver; in SYSCALL_DEFINE5() local
1054 receiver = wq_get_first_waiter(info, RECV); in SYSCALL_DEFINE5()
1055 if (receiver) { in SYSCALL_DEFINE5()
1056 pipelined_send(&wake_q, info, msg_ptr, receiver); in SYSCALL_DEFINE5()
|
| /linux-4.4.14/tools/perf/bench/ |
| D | sched-messaging.c | 111 static void *receiver(struct receiver_context* ctx) in receiver() function
222 pth[i] = create_worker(ctx, (void *)receiver); in group()
|
| /linux-4.4.14/sound/core/seq/ |
| D | seq_clientmgr.c | 1446 struct snd_seq_client *receiver = NULL, *sender = NULL; in snd_seq_ioctl_subscribe_port() local
1453 if ((receiver = snd_seq_client_use_ptr(subs.dest.client)) == NULL) in snd_seq_ioctl_subscribe_port()
1459 if ((dport = snd_seq_port_use_ptr(receiver, subs.dest.port)) == NULL) in snd_seq_ioctl_subscribe_port()
1467 result = snd_seq_port_connect(client, sender, sport, receiver, dport, &subs); in snd_seq_ioctl_subscribe_port()
1478 if (receiver) in snd_seq_ioctl_subscribe_port()
1479 snd_seq_client_unlock(receiver); in snd_seq_ioctl_subscribe_port()
1491 struct snd_seq_client *receiver = NULL, *sender = NULL; in snd_seq_ioctl_unsubscribe_port() local
1498 if ((receiver = snd_seq_client_use_ptr(subs.dest.client)) == NULL) in snd_seq_ioctl_unsubscribe_port()
1504 if ((dport = snd_seq_port_use_ptr(receiver, subs.dest.port)) == NULL) in snd_seq_ioctl_unsubscribe_port()
1511 result = snd_seq_port_disconnect(client, sender, sport, receiver, dport, &subs); in snd_seq_ioctl_unsubscribe_port()
[all …]
|
| /linux-4.4.14/Documentation/devicetree/bindings/serial/ |
| D | fsl-lpuart.txt | 1 * Freescale low power universal asynchronous receiver/transmitter (lpuart)
|
| /linux-4.4.14/drivers/staging/media/mn88473/ |
| D | TODO | 2 device drivers (USB-bridge, tuner) needed for Astrometa receiver in
|
| /linux-4.4.14/drivers/staging/media/mn88472/ |
| D | TODO | 2 device drivers (USB-bridge, tuner) needed for Astrometa receiver in
|
| /linux-4.4.14/tools/perf/Documentation/ |
| D | perf-bench.txt | 93 options (20 sender and receiver processes per group)
99 (20 sender and receiver threads per group)
|
| /linux-4.4.14/Documentation/devicetree/bindings/hsi/ |
| D | client-devices.txt | 12 the transmission mode is the same for receiver and
|
| /linux-4.4.14/Documentation/devicetree/ |
| D | changesets.txt | 10 receiver sees a complete and consistent state of the tree when it
|
| /linux-4.4.14/Documentation/ABI/testing/ |
| D | sysfs-class-rc | 16 control receiver device where N is the number of the receiver.
|
| /linux-4.4.14/arch/cris/arch-v10/kernel/ |
| D | head.S | 467 ; Set up and enable the serial0 receiver.
501 ; Set up and enable the serial1 receiver.
536 ; Set up and enable the serial2 receiver.
572 ; Set up and enable the serial3 receiver.
|
| /linux-4.4.14/drivers/media/radio/ |
| D | Kconfig | 88 tristate "Griffin radioSHARK USB radio receiver"
92 Choose Y here if you have this radio receiver.
106 tristate "Griffin radioSHARK2 USB radio receiver"
109 Choose Y here if you have this radio receiver.
140 Say Y here if you want to connect this type of AM/FM/SW receiver
|
| /linux-4.4.14/arch/arm64/boot/dts/rockchip/ |
| D | rk3368-r88.dts | 92 ir: ir-receiver {
93 compatible = "gpio-ir-receiver";
|
| /linux-4.4.14/drivers/i2c/busses/ |
| D | i2c-omap.c | 216 unsigned receiver:1; /* true when we're in receiver mode */ member
633 omap->receiver = !!(msg->flags & I2C_M_RD); in omap_i2c_xfer_msg()
634 omap_i2c_resize_fifo(omap, msg->len, omap->receiver); in omap_i2c_xfer_msg()
1026 if (omap->receiver) in omap_i2c_isr_thread()
|
| /linux-4.4.14/Documentation/input/ |
| D | multi-touch-protocol.txt | 17 describes how to send the raw data for all contacts to the receiver. For
33 event, which instructs the receiver to accept the data for the current
38 This generates an ABS_MT_SLOT event, which instructs the receiver to
42 input_sync() function. This instructs the receiver to act upon events
|
| /linux-4.4.14/arch/cris/arch-v32/drivers/ |
| D | Kconfig | 37 bool "Disable serial receiver"
40 It is necessary to disable the serial receiver to avoid serial
|
| /linux-4.4.14/arch/cris/arch-v10/drivers/ |
| D | Kconfig | 404 bool "Disable serial receiver"
407 It's necessary to disable the serial receiver to avoid serial
409 Axis 2400/2401 must disable receiver.
|
| /linux-4.4.14/drivers/net/arcnet/ |
| D | Kconfig | 65 2=transmission accepted by the receiver hardware
|
| /linux-4.4.14/drivers/block/drbd/ |
| D | drbd_state.c | 1155 drbd_thread_stop_nowait(&connection->receiver); in __drbd_set_state()
1159 drbd_thread_stop_nowait(&connection->receiver); in __drbd_set_state()
1164 drbd_thread_restart_nowait(&connection->receiver); in __drbd_set_state()
1591 drbd_thread_start(&connection->receiver); in w_after_conn_state_ch()
|
| D | drbd_main.c | 1974 if (first_peer_device(device)->connection->receiver.t_state != NONE) in drbd_device_cleanup()
1976 first_peer_device(device)->connection->receiver.t_state); in drbd_device_cleanup()
2565 connection->receiver.reset_cpu_mask = 1; in set_resource_options()
2651 drbd_thread_init(resource, &connection->receiver, drbd_receiver, "receiver"); in conn_create()
2652 connection->receiver.connection = connection; in conn_create()
|
| D | drbd_int.h | 756 struct drbd_thread receiver; member
|
| D | drbd_receiver.c | 996 if (get_t_state(&connection->receiver) == EXITING) in conn_connect()
4604 while (get_t_state(&connection->receiver) == RUNNING) { in drbdd()
4607 drbd_thread_current_set_cpu(&connection->receiver); in drbdd()
|
| D | drbd_nl.c | 1246 drbd_thread_stop(&connection->receiver); in conn_reconfig_done()
2417 drbd_thread_stop(&connection->receiver); in conn_try_disconnect()
|
| /linux-4.4.14/Documentation/video4linux/bttv/ |
| D | Sound-FAQ | 54 receiver chips. Some boards use the i2c bus instead of the gpio pins
|
| /linux-4.4.14/Documentation/spi/ |
| D | pxa2xx | 117 trailing bytes in the SSP receiver fifo. The correct value for this field is
|
| /linux-4.4.14/drivers/hid/ |
| D | Kconfig | 127 tristate "Apple infrared receiver"
132 and Mac Pros. This receiver is also used in the Apple TV set-top box
405 devices to the same receiver. Without this driver it will be handled by
|
| /linux-4.4.14/drivers/net/hamradio/ |
| D | Kconfig | 109 line. Say Y here to foil this by explicitly disabling the receiver
|
| /linux-4.4.14/Documentation/sound/alsa/ |
| D | hdspm.txt | 29 receiver, only 56 are transmitted/received over the MADI, but
|
| /linux-4.4.14/Documentation/pps/ |
| D | pps.txt | 36 GPS receiver as PPS source, to obtain a wallclock-time with
|
| /linux-4.4.14/Documentation/powerpc/ |
| D | qe_firmware.txt | 138 | | | initializing the ATM receiver a sequence of |
|
| /linux-4.4.14/drivers/input/misc/ |
| D | Kconfig | 350 Currently only the UIA-11 type of receiver has been tested. The tag
351 on the receiver that connects to the USB port should have a P/N that
|
| /linux-4.4.14/Documentation/dvb/ |
| D | avermedia.txt | 35 * Tune the receiver to receive a broadcast signal
|
| /linux-4.4.14/Documentation/block/ |
| D | data-integrity.txt | 242 It is up to the receiver to process them and verify data
|
| /linux-4.4.14/Documentation/devicetree/bindings/powerpc/fsl/ |
| D | fman.txt | 152 Ethernet receiver (RX)
|
| /linux-4.4.14/sound/oss/ |
| D | CHANGELOG | 40 stream of received 0x00 bytes when the MIDI receiver is enabled.
|
| /linux-4.4.14/scripts/ |
| D | spelling.txt | 796 reciever||receiver
|
| /linux-4.4.14/Documentation/security/ |
| D | Smack.txt | 511 receiver. The receiver is not required to have read access to the sender.
|
| /linux-4.4.14/Documentation/serial/ |
| D | moxa-smartio | 468 being closed, before the receiver is disable.
|