| /linux-4.4.14/arch/arm/mach-omap2/ |
| H A D | cpuidle34xx.c | 68 /* In C1 do not allow PER state lower than CORE state */
119 /* Deny idle for C1 */ omap3_enter_idle()
145 /* Re-allow idle for C1 */ omap3_enter_idle()
174 int next_index = 0; /* C1 is the default value */ next_valid_state()
226 * Use only C1 if CAM is active. omap3_enter_idle_bm()
269 .name = "C1",
332 .name = "C1",
|
| H A D | cpuidle44xx.c | 181 * stops for the states above C1.
193 /* C1 - CPU0 ON + CPU1 ON + MPU ON */
197 .name = "C1",
|
| H A D | board-rx51.c | 71 | C1 | 110 + 162 | 5 |
|
| /linux-4.4.14/tools/power/cpupower/utils/idle_monitor/ |
| H A D | cpuidle_sysfs.c | 87 strcpy(tmp, "C1"); fix_up_intel_idle_driver_name()
99 strcpy(tmp, "C1"); fix_up_intel_idle_driver_name()
114 strcpy(tmp, "C1"); fix_up_intel_idle_driver_name()
|
| H A D | amd_fam14h_idle.c | 61 .desc = N_("Processor Package C1"),
|
| /linux-4.4.14/drivers/input/mouse/ |
| H A D | hgpk.h | 16 HGPK_MODEL_D = 0x50, /* C1, mass production */
|
| /linux-4.4.14/drivers/media/usb/pvrusb2/ |
| H A D | pvrusb2-std.h | 27 // false. String is expected to be of the form: C1-x/y;C2-a/b where C1 and
|
| /linux-4.4.14/drivers/cpuidle/ |
| H A D | cpuidle-exynos.c | 88 .name = "C1",
107 .name = "C1",
|
| H A D | cpuidle-big_little.c | 71 .name = "C1",
92 .name = "C1",
|
| /linux-4.4.14/arch/x86/include/asm/ |
| H A D | olpc.h | 26 * is a PreB1, and 0x0C18 is a C1.
56 * order) were created: A1, B1, B2, B3, B4, C1. The A1 through B2 models
|
| /linux-4.4.14/crypto/ |
| H A D | wp512.c | 142 static const u64 C1[256] = { variable
805 C1[(int)(K[7] >> 48) & 0xff] ^ wp512_process_buffer()
815 C1[(int)(K[0] >> 48) & 0xff] ^ wp512_process_buffer()
824 C1[(int)(K[1] >> 48) & 0xff] ^ wp512_process_buffer()
833 C1[(int)(K[2] >> 48) & 0xff] ^ wp512_process_buffer()
842 C1[(int)(K[3] >> 48) & 0xff] ^ wp512_process_buffer()
851 C1[(int)(K[4] >> 48) & 0xff] ^ wp512_process_buffer()
860 C1[(int)(K[5] >> 48) & 0xff] ^ wp512_process_buffer()
869 C1[(int)(K[6] >> 48) & 0xff] ^ wp512_process_buffer()
887 C1[(int)(state[7] >> 48) & 0xff] ^ wp512_process_buffer()
897 C1[(int)(state[0] >> 48) & 0xff] ^ wp512_process_buffer()
907 C1[(int)(state[1] >> 48) & 0xff] ^ wp512_process_buffer()
917 C1[(int)(state[2] >> 48) & 0xff] ^ wp512_process_buffer()
927 C1[(int)(state[3] >> 48) & 0xff] ^ wp512_process_buffer()
937 C1[(int)(state[4] >> 48) & 0xff] ^ wp512_process_buffer()
947 C1[(int)(state[5] >> 48) & 0xff] ^ wp512_process_buffer()
957 C1[(int)(state[6] >> 48) & 0xff] ^ wp512_process_buffer()
|
| H A D | twofish_common.c | 613 CALC_S (sa, sb, sc, sd, 3, 0xD1, 0x7F, 0x3D, 0x99); /* 87 F3 C1 5A */ __twofish_setkey()
621 CALC_S (se, sf, sg, sh, 11, 0xD1, 0x7F, 0x3D, 0x99); /* 87 F3 C1 5A */ __twofish_setkey()
632 CALC_S (si, sj, sk, sl, 19, 0xD1, 0x7F, 0x3D, 0x99); /* 87 F3 C1 5A */ __twofish_setkey()
644 CALC_S (sm, sn, so, sp, 27, 0xD1, 0x7F, 0x3D, 0x99); /* 87 F3 C1 5A */ __twofish_setkey()
|
| /linux-4.4.14/drivers/idle/ |
| H A D | intel_idle.c | 43 * processors above n, those processors will use C1 only.
81 /* Reliable LAPIC Timer States, bit 1 for C1 etc. */
82 static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */
117 * 0x00 means "MWAIT(C1)", 0x10 means "MWAIT(C2)" etc.
131 .name = "C1-NHM",
168 .name = "C1-SNB",
213 .name = "C1-BYT",
258 .name = "C1-CHT",
303 .name = "C1-IVB",
348 .name = "C1-IVT",
385 .name = "C1-IVT-4S",
422 .name = "C1-IVT-8S",
459 .name = "C1-HSW",
527 .name = "C1-BDW",
596 .name = "C1-SKL",
701 .name = "C1-AVN",
|
| /linux-4.4.14/include/uapi/linux/ |
| H A D | sonet.h | 56 #define SONET_FRSENSE_SIZE 6 /* C1[3],H1[3] (0xff for unknown) */
|
| H A D | ixjuser.h | 174 hz261 = 0x7d50, /* .63 C1 */
267 C1 = hz261, enumerator in enum:__anon14184
|
| /linux-4.4.14/arch/sh/kernel/cpu/shmobile/ |
| H A D | cpuidle.c | 63 .name = "C1",
|
| /linux-4.4.14/arch/arm/mach-orion5x/ |
| H A D | dns323-setup.c | 6 * Support for HW Rev C1:
53 /* Rev C1 */
97 /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI dns323_pci_init()
390 /* Rev C1 Fan speed notes:
427 * On the DNS-323 C1 the following devices are attached via I2C:
484 pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n"); dns323_identify_rev()
486 /* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is dns323_identify_rev()
|
| /linux-4.4.14/sound/soc/codecs/ |
| H A D | sta32x.h | 164 #define STA32X_CxCFG_TCB 0x01 /* only C1 and C2 */
166 #define STA32X_CxCFG_EQBP 0x02 /* only C1 and C2 */
|
| H A D | max98088.c | 250 { 0xc1, 0x00 }, /* C1 DAI2 biquad */
|
| H A D | max98090.c | 234 { 0xC1, 0x00 }, /* C1 Record TDM Slot */
|
| /linux-4.4.14/arch/arc/include/asm/ |
| H A D | mmu_context.h | 142 * e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps. switch_mm()
143 * For a non-aggregating mm_cpumask, IPI not sent C1, and if T1 switch_mm()
144 * were to re-migrate to C1, it could access the unmapped region switch_mm()
|
| /linux-4.4.14/arch/x86/kernel/ |
| H A D | process.c | 391 * Intel Core2 and older machines prefer MWAIT over HALT for C1.
393 * on systems that support only C1 -- so the boot default must be MWAIT.
397 * So for default C1, which is used during boot until cpuidle loads,
398 * use MWAIT-C1 on Intel HW that has it, else use HALT.
412 * MONITOR/MWAIT with no hints, used for default C1 state. This invokes MWAIT
|
| /linux-4.4.14/drivers/acpi/ |
| H A D | processor_idle.c | 318 /* set the first C-State to C1 */ acpi_processor_get_power_info_default()
319 /* all processors need to support C1 */ acpi_processor_get_power_info_default()
404 * Some buggy BIOSes won't list C1 in _CST - acpi_processor_get_power_info_cst()
420 * C1 is a special case where FIXED_HARDWARE acpi_processor_get_power_info_cst()
433 * In most cases the C1 space_id obtained from acpi_processor_get_power_info_cst()
439 * the C1 entry_method type should be acpi_processor_get_power_info_cst()
946 * Halt-induced C1 is not good for ->enter_freeze, because it acpi_processor_setup_cpuidle_states()
947 * re-enables interrupts on exit. Moreover, C1 is generally not acpi_processor_setup_cpuidle_states()
949 * avoid C1 and the situations in which we may need to fall back acpi_processor_setup_cpuidle_states()
1091 * platforms that only support C1. acpi_processor_power_init()
|
| H A D | acpi_pnp.c | 297 {"LTS0001"}, /* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in disguise) */
|
| H A D | acpi_lpss.c | 239 { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
|
| /linux-4.4.14/drivers/media/dvb-frontends/ |
| H A D | ix2505v.c | 113 * byte4: 1 | 1(C1) | 1(C0) | PD5 | PD4 | TM | 0(RTS)| 1(REF)
168 data[2] = 0x81 | ((cc & 0x3) << 5) ; /*PD5,PD4 & TM = 0|C1,C0|REF=1*/ ix2505v_set_params()
|
| H A D | dvb-pll.c | 514 * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
516 * Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
|
| H A D | tda18271c2dd.c | 407 /* Switching off LT (as datasheet says) causes calibration on C1 to fail */ CalibrateRF()
409 if (state->m_Regs[ID] != 0x83) /* C1: ID == 83, C2: ID == 84 */ CalibrateRF()
652 state->m_Regs[ID] = Regs[ID]; /* Chip version, (needed for C1 workarround in CalibrateRF) */ PowerScan()
|
| H A D | zl10036.c | 173 * 5[0x00]: P0 | C1 | C0 | R4 | R3 | R2 | R1 | R0
|
| /linux-4.4.14/arch/x86/math-emu/ |
| H A D | poly_sin.c | 124 /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */ poly_sine()
285 /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */ poly_cos()
|
| H A D | poly_tan.c | 80 /* pi/2 in hex is: 1.921fb54442d18469 898CC51701B839A2 52049C1 */ poly_tan()
|
| H A D | errors.c | 589 The roundup bit (C1) is also set because we have arith_overflow()
|
| /linux-4.4.14/drivers/hwmon/ |
| H A D | ads7828.c | 56 /* Command byte C2,C1,C0 - see datasheet */ ads7828_cmd_byte()
|
| H A D | ltc4215.c | 11 * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697
|
| H A D | ltc4245.c | 13 * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517
|
| /linux-4.4.14/include/media/ |
| H A D | adv7842.h | 115 u16 C1; member in struct:adv7842_sdp_csc_coeff
|
| /linux-4.4.14/arch/mips/sibyte/sb1250/ |
| H A D | setup.c | 74 pass_str = "C1"; setup_bcm1250()
|
| /linux-4.4.14/arch/m68k/fpsp040/ |
| H A D | satan.S | 408 |--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
410 |--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
437 faddd ATANC1,%fp1 | ...C1+Z*(C3+Z*C5)
440 faddx %fp2,%fp1 | ...[Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
|
| /linux-4.4.14/arch/hexagon/kernel/ |
| H A D | vm_entry.S | 111 R15:14 = C1:0; } \
189 C1:0 = R15:14; }\
|
| /linux-4.4.14/drivers/staging/rtl8723au/include/ |
| H A D | rtl8723a_hal.h | 85 * 88C1: MP A-cut; 92C1: MP A-cut
|
| /linux-4.4.14/drivers/tty/serial/8250/ |
| H A D | 8250_pnp.c | 360 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
|
| /linux-4.4.14/drivers/net/wireless/realtek/rtl8xxxu/ |
| H A D | rtl8xxxu.h | 381 88C1: MP A-cut;
382 92C1: MP A-cut */
|
| /linux-4.4.14/drivers/i2c/busses/ |
| H A D | i2c-designware-platdrv.c | 123 { "808622C1", 0 },
|
| /linux-4.4.14/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/ |
| H A D | phy.c | 3732 /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx_fill_iqc()
3838 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx()
3848 rtl_write_dword(rtlpriv, 0xcb8, 0x00100000);/* cb8[20] \B1N SI/PI \A8ϥ\CE\C5v\A4\C1\B5\B9 iqk_dpk module */ _rtl8821ae_iqk_tx()
3869 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx()
3888 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx()
3925 rtl_write_dword(rtlpriv, 0xcb8, 0x00100000);/* cb8[20] \B1N SI/PI \A8ϥ\CE\C5v\A4\C1\B5\B9 iqk_dpk module */ _rtl8821ae_iqk_tx()
3979 rtl_write_dword(rtlpriv, 0xcb8, 0x00100000);/* cb8[20] \B1N SI/PI \A8ϥ\CE\C5v\A4\C1\B5\B9 iqk_dpk module */ _rtl8821ae_iqk_tx()
4051 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx()
4089 rtl_write_dword(rtlpriv, 0xcb8, 0x00100000);/* cb8[20] \B1N SI/PI \A8ϥ\CE\C5v\A4\C1\B5\B9 iqk_dpk module */ _rtl8821ae_iqk_tx()
4163 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx()
4172 rtl_write_dword(rtlpriv, 0xcb8, 0x00100000);/* cb8[20] \B1N SI/PI \A8ϥ\CE\C5v\A4\C1\B5\B9 iqk_dpk module */ _rtl8821ae_iqk_tx()
4243 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx()
4248 rtl_write_dword(rtlpriv, 0xcb8, 0x00100000);/* cb8[20] \B1N SI/PI \A8ϥ\CE\C5v\A4\C1\B5\B9 iqk_dpk module */ _rtl8821ae_iqk_tx()
4320 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_tx()
4327 rtl_write_dword(rtlpriv, 0xcb8, 0x00100000);/* cb8[20] \B1N SI/PI \A8ϥ\CE\C5v\A4\C1\B5\B9 iqk_dpk module */ _rtl8821ae_iqk_tx()
4498 rtl_set_bbreg(hw, 0x82c, BIT(31), 0x1); /* [31] = 1 --> Page C1 */ _rtl8821ae_iqk_restore_afe()
|
| /linux-4.4.14/drivers/cpufreq/ |
| H A D | cpufreq-nforce2.c | 392 * Detects nForce2 A2 and C1 stepping
|
| /linux-4.4.14/drivers/video/fbdev/ |
| H A D | ssd1307fb.c | 172 * C0 C1 C2 C3 C4 ssd1307fb_update_display()
181 * (2) A1 B1 C1 D1 E1 F1 G1 H1 ssd1307fb_update_display()
|
| /linux-4.4.14/arch/x86/pci/ |
| H A D | fixup.c | 162 * Fixup for C1 Halt Disconnect problem on nForce2 systems.
191 dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n"); pci_fixup_nforce2()
|
| /linux-4.4.14/block/ |
| H A D | blk-flush.c | 40 * C1. At any given time, only one flush shall be in progress. This makes
297 /* C1 described at the top of this file */ blk_kick_flush()
|
| /linux-4.4.14/arch/mips/kernel/ |
| H A D | mips-cm.c | 342 "C3=%s C2=%s C1=%s C0=%s SC=%s " mips_cm_error_report()
|
| /linux-4.4.14/arch/sh/boards/ |
| H A D | board-magicpanelr2.c | 111 * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; setup_port_multiplexing()
|
| /linux-4.4.14/arch/arm/mm/ |
| H A D | proc-v6.S | 187 * on. Return in r0 the new CP15 C1 control register setting.
|
| H A D | proc-v7.S | 253 * on. Return in r0 the new CP15 C1 control register setting.
|
| /linux-4.4.14/tools/power/cpupower/utils/helpers/ |
| H A D | sysfs.c | 123 * This means if you want C1 info, pass 0 as idlestate param
|
| /linux-4.4.14/drivers/media/i2c/ |
| H A D | ad9389b.c | 183 u16 C1, u16 C2, u16 C3, u16 C4) ad9389b_csc_coeff()
206 ad9389b_wr_and_or(sd, 0x28, 0xe0, C1>>8); ad9389b_csc_coeff()
207 ad9389b_wr(sd, 0x29, C1); ad9389b_csc_coeff()
180 ad9389b_csc_coeff(struct v4l2_subdev *sd, u16 A1, u16 A2, u16 A3, u16 A4, u16 B1, u16 B2, u16 B3, u16 B4, u16 C1, u16 C2, u16 C3, u16 C4) ad9389b_csc_coeff() argument
|
| H A D | adv7511.c | 290 u16 C1, u16 C2, u16 C3, u16 C4) adv7511_csc_coeff()
313 adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8); adv7511_csc_coeff()
314 adv7511_wr(sd, 0x29, C1); adv7511_csc_coeff()
287 adv7511_csc_coeff(struct v4l2_subdev *sd, u16 A1, u16 A2, u16 A3, u16 A4, u16 B1, u16 B2, u16 B3, u16 B4, u16 C1, u16 C2, u16 C3, u16 C4) adv7511_csc_coeff() argument
|
| H A D | adv7842.c | 1775 sdp_io_write_and_or(sd, 0xf0, 0xe0, c->C1 >> 8); sdp_csc_coeff()
1776 sdp_io_write(sd, 0xf1, c->C1); sdp_csc_coeff()
|
| /linux-4.4.14/drivers/net/wireless/b43/ |
| H A D | radio_2055.h | 57 #define B2055_PLL_LFC1 0x32 /* PLL LF C1 */
|
| /linux-4.4.14/drivers/edac/ |
| H A D | i82975x_edac.c | 532 i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n", i82975x_probe1()
|
| H A D | e752x_edac.c | 500 "PCI Express C1",
|
| /linux-4.4.14/arch/x86/kernel/cpu/ |
| H A D | perf_event_intel_cstate.c | 41 * MSR_CORE_C1_RES: CORE C1 Residency Counter
|
| /linux-4.4.14/arch/x86/kernel/fpu/ |
| H A D | core.c | 478 * C1 reg you need in case of a stack fault, 0x040 is the stack fpu__exception_code()
|
| /linux-4.4.14/drivers/isdn/gigaset/ |
| H A D | usb-gigaset.c | 62 * C1 08 01
64 * C1 0F ll ll
|
| H A D | capi.c | 136 [25] = { "8890", "91C1" }, /* OSI application
|
| /linux-4.4.14/drivers/pinctrl/nomadik/ |
| H A D | pinctrl-nomadik-db8500.c | 586 /* Other C1 column */
768 /* Other alt C1 column */
|
| H A D | pinctrl-nomadik-db8540.c | 555 /* Other alt C1 column */
763 /* Other alt C1 column */
|
| /linux-4.4.14/sound/isa/cs423x/ |
| H A D | cs4236_lib.c | 33 * C1 (all chips except CS4236)
320 snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n", snd_cs4236_create()
|
| /linux-4.4.14/sound/pci/hda/ |
| H A D | patch_cirrus.c | 244 /* Errata: CS4207 rev C0/C1/C2 Silicon
313 /* init_verb sequence for C0/C1/C2 errata*/ cs_init()
|
| H A D | patch_sigmatel.c | 1191 102801C1
|
| /linux-4.4.14/net/sctp/ |
| H A D | outqueue.c | 503 * following the procedures outlined in C1 - C5. sctp_retransmit()
1700 /* PR-SCTP C1) Let SackCumAck be the Cumulative TSN ACK carried in the sctp_generate_fwdtsn()
1763 /* PR-SCTP C3) If, after step C1 and C2, the "Advanced.Peer.Ack.Point" sctp_generate_fwdtsn()
|
| H A D | transport.c | 69 * C1) Until an RTT measurement has been made for a packet sent to the sctp_transport_init()
|
| /linux-4.4.14/drivers/scsi/ |
| H A D | dc395x.h | 466 /* C1 Transfer information out with DMA */
|
| /linux-4.4.14/drivers/media/tuners/ |
| H A D | tda18271-common.c | 703 /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range tda18271_calc_rf_cal()
|
| H A D | tda18271-fe.c | 1180 name = "TDA18271HD/C1"; tda18271_get_id()
|
| /linux-4.4.14/drivers/cpuidle/governors/ |
| H A D | menu.c | 330 * We want to default to C1 (hlt), not to busy polling menu_select()
|
| /linux-4.4.14/drivers/gpu/drm/i915/ |
| H A D | dvo_ns2501.c | 211 uint16_t hstart; /* horizontal start, registers C1/C2 */
|
| /linux-4.4.14/lib/fonts/ |
| H A D | font_acorn_8x8.c | 199 /* C1 */ 0x18, 0x18, 0x18, 0xff, 0x00, 0x00, 0x00, 0x00,
|
| /linux-4.4.14/include/acpi/ |
| H A D | actbl.h | 311 #define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
|
| /linux-4.4.14/sound/pci/ice1712/ |
| H A D | ice1712.h | 266 unsigned char caddr; /* C0 and C1 bits */
|
| H A D | prodigy192.c | 439 #define AK4114_ADDR 0x00 /* C1-C0: Chip Address
|
| /linux-4.4.14/drivers/media/pci/bt8xx/ |
| H A D | bttv-cards.c | 1634 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1646 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1660 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1684 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1710 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1722 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
|
| /linux-4.4.14/tools/power/x86/turbostat/ |
| H A D | turbostat.c | 766 * Some models have a dedicated C1 residency MSR, delta_thread()
1396 (msr & SNB_C1_AUTO_UNDEMOTE) ? "UNdemote-C1, " : "", dump_nhm_cst_cfg()
1398 (msr & NHM_C1_AUTO_DEMOTE) ? "demote-C1, " : "", dump_nhm_cst_cfg()
|
| /linux-4.4.14/drivers/usb/serial/ |
| H A D | io_usbvend.h | 533 __u8 DescType; // C1 Desc type, per USB (= DEVICE type)
|
| H A D | option.c | 1964 { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
1965 { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
|
| /linux-4.4.14/drivers/usb/atm/ |
| H A D | cxacru.c | 1316 { /* V = Zyxel P = 630-C1 aka OMNI ADSL USB (Annex A) */
|
| /linux-4.4.14/drivers/scsi/qla4xxx/ |
| H A D | ql4_fw.h | 905 uint16_t ddb_link; /* 1C0-1C1 */
|
| /linux-4.4.14/drivers/net/wireless/p54/ |
| H A D | p54usb.c | 111 {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */
|
| /linux-4.4.14/drivers/net/usb/ |
| H A D | asix_devices.c | 1042 // DLink DUB-E100 H/W Ver C1
|
| /linux-4.4.14/drivers/pinctrl/ |
| H A D | pinctrl-u300.c | 338 PINCTRL_PIN(150, "PIO PDI C1"),
|
| /linux-4.4.14/drivers/media/usb/em28xx/ |
| H A D | em28xx-cards.c | 181 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
2087 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
|
| /linux-4.4.14/arch/sparc/kernel/ |
| H A D | traps_64.c | 1058 #define C1 129 macro
1071 /*00*/NONE, C0, C1, M2, C2, M2, M3, 47, C3, M2, M2, 53, M2, 41, 29, M,
|
| /linux-4.4.14/fs/ext4/ |
| H A D | extents.c | 3465 * - C1: abut_ex is initialized, ext4_ext_convert_to_initialized()
3471 if ((!ext4_ext_is_unwritten(abut_ex)) && /*C1*/ ext4_ext_convert_to_initialized()
3511 * - C1: abut_ex is initialized, ext4_ext_convert_to_initialized()
3517 if ((!ext4_ext_is_unwritten(abut_ex)) && /*C1*/ ext4_ext_convert_to_initialized()
|
| /linux-4.4.14/drivers/mfd/ |
| H A D | db8500-prcmu.c | 2622 return "U8500 C1"; fw_project_name()
|
| /linux-4.4.14/include/net/sctp/ |
| H A D | structs.h | 1507 * C1) ... "Peer-Serial-Number'. This value MUST be initialized to the
|
| /linux-4.4.14/arch/m68k/ifpsp060/src/ |
| H A D | fplsp.S | 6411 #--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
6413 #--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
6441 fadd.d ATANC1(%pc),%fp1 # C1+Z*(C3+Z*C5)
6444 fadd.x %fp2,%fp1 # [Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
|
| H A D | fpsp.S | 6517 #--X'+X'*Y*(C1+Y*(C2+Y*(C3+Y*(C4+Y*C5)))), X' = -1/X, Y = X'*X'
6519 #--X'+X'*Y*( [C1+Z*(C3+Z*C5)] + [Y*(C2+Z*C4)] ), Z = Y*Y.
6547 fadd.d ATANC1(%pc),%fp1 # C1+Z*(C3+Z*C5)
6550 fadd.x %fp2,%fp1 # [Y*(C2+Z*C4)]+[C1+Z*(C3+Z*C5)]
|
| /linux-4.4.14/drivers/net/ethernet/marvell/ |
| H A D | skge.c | 94 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4302) }, /* D-Link DGE-530T Rev C1 */
|
| /linux-4.4.14/drivers/isdn/hardware/eicon/ |
| H A D | message.c | 370 0x83 /* Ext, BR , res, res, C2 , C1 , B , F */
377 0xc3 | V120_HEADER_BREAK_BIT /* Ext, BR , res, res, C2 , C1 , B , F */
|
| /linux-4.4.14/drivers/message/fusion/ |
| H A D | mptbase.c | 1618 product_str = "LSISAS1078 C1"; mpt_get_product_name()
|
| /linux-4.4.14/drivers/scsi/lpfc/ |
| H A D | lpfc_init.c | 6213 /* DIF Type 1 protection for profiles AST1/C1 is end to end */ lpfc_setup_bg()
|