Searched refs:INQUIRY (Results 1 - 93 of 93) sorted by relevance

/linux-4.1.27/drivers/scsi/
H A Dscsi_scan.c11 * A specific LUN is scanned via an INQUIRY command; if the LUN has a
106 "Timeout (in seconds) waiting for devices to answer INQUIRY."
519 * sanitize_inquiry_string - remove non-graphical chars from an INQUIRY result string
520 * @s: INQUIRY result string to sanitize
524 * The SCSI spec says that INQUIRY vendor, product, and revision
545 * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
547 * @inq_result: area to store the INQUIRY result
552 * Probe the lun associated with @req using a standard SCSI INQUIRY;
554 * If the INQUIRY is successful, zero is returned and the
555 * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
578 "scsi scan: INQUIRY pass %d length %d\n", scsi_probe_lun()
586 scsi_cmd[0] = INQUIRY; scsi_probe_lun()
597 "scsi scan: INQUIRY %s with code 0x%x\n", scsi_probe_lun()
604 * INQUIRY should not yield UNIT_ATTENTION scsi_probe_lun()
691 * not want to hang because of a short INQUIRY. On the flip side, scsi_probe_lun()
693 * short INQUIRY), an abort here prevents any further use of the scsi_probe_lun()
704 "scsi scan: INQUIRY result too short (%d)," scsi_probe_lun()
714 * then send the INQUIRY again, since the INQUIRY can change after scsi_probe_lun()
749 * @inq_result: holds the result of a previous INQUIRY to the LUN
771 * value, have an ioctl that executes the same INQUIRY code used scsi_add_lun()
772 * in scsi_probe_lun, let user level programs doing INQUIRY scsi_add_lun()
778 * Copy at least 36 bytes of INQUIRY data, so that we don't scsi_add_lun()
781 * the INQUIRY Additional Length byte to a small value, indicating scsi_add_lun()
1002 * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
1093 * result contains valid SCSI INQUIRY data. scsi_probe_and_add_lun()
H A Dscsi_devinfo.c236 {"SEAGATE", "ST34555N", "0930", BLIST_NOTQ}, /* Chokes on tagged INQUIRY */
424 * XXX why skip leading spaces? If an odd INQUIRY scsi_dev_info_list_del_keyed()
586 * XXX why skip leading spaces? If an odd INQUIRY scsi_get_device_flags_keyed()
H A Deata_generic.h342 * broken INQUIRY */
H A D53c700.c65 * to hang on initial INQUIRY. Updated NCR_700_readl/writel to use
1041 // SCp->cmnd[0] == INQUIRY && SCp->use_sg == 0) { process_script_interrupt()
1416 /* for INQUIRY or REQUEST_SENSE commands, we cannot be sure NCR_700_start_command()
1419 if(SCp->cmnd[0] == INQUIRY || SCp->cmnd[0] == REQUEST_SENSE || NCR_700_start_command()
H A Deata_pio.c530 cp.cp_cdb[0] = INQUIRY; get_pio_board_data()
674 printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", base); register_pio_HBA()
H A Dosst.h11 * INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C)
H A D3w-xxxx.c1944 case INQUIRY: tw_scsi_queue_lck()
1945 dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n"); tw_scsi_queue_lck()
2126 case INQUIRY: tw_interrupt()
2127 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n"); tw_interrupt()
H A Dscsi_transport_spi.c729 INQUIRY, 0, 0, 0, len, 0 spi_dv_device_compare_inquiry()
962 /* Do the read only INQUIRY tests */ spi_dv_device_internal()
H A Dstorvsc_drv.c1163 * INQUIRY command with page code parameter set to 0x80 storvsc_on_io_completion()
1171 if ((stor_pkt->vm_srb.cdb[0] == INQUIRY) || storvsc_on_io_completion()
H A Dmegaraid.c677 case INQUIRY: mega_build_cmd()
982 case INQUIRY: mega_prepare_passthru()
1044 case INQUIRY: mega_prepare_extpassthru()
1550 if( cmd->cmnd[0] == INQUIRY && !islogical ) { mega_cmd_done()
4077 pthru->cdb[0] = INQUIRY; mega_internal_dev_inquiry()
H A Dpmcraid.c216 * scanned (i.e. it has responded to an INQUIRY). For VSET resources, the
995 * @cmd: pointer to command block used to send INQUIRY command
1026 * @cmd: pointer to command block used to send INQUIRY command
1041 ioarcb->cdb[0] = INQUIRY; pmcraid_get_fwversion()
5124 /* allocate DMAable memory for page D0 INQUIRY buffer */ pmcraid_init_buffers()
5131 pmcraid_err("couldn't allocate DMA memory for INQUIRY\n"); pmcraid_init_buffers()
H A Dscsi.c761 cmd[0] = INQUIRY; scsi_vpd_inquiry()
H A Dscsi_sysfs.c1244 * sdev->lun_in_cdb for the initial INQUIRY command. For LUN 0 the scsi_sysfs_device_initialize()
H A Dgdth.c2107 if (b == ha->virt_bus && nscp->cmnd[0] != INQUIRY && gdth_next()
2156 case INQUIRY: gdth_next()
2166 if (ha->hdr[t].media_changed && nscp->cmnd[0] != INQUIRY) { gdth_next()
2343 case INQUIRY: gdth_internal_cache_cmd()
H A Dgdth.h945 /* INQUIRY data format */
H A Dips.c3329 if (scb->scsi_cmd->cmnd[0] == INQUIRY) { ips_map_status()
3509 case INQUIRY: ips_send_cmd()
3518 if (scb->scsi_cmd->cmnd[0] == INQUIRY) { ips_send_cmd()
3920 case INQUIRY: ips_chkstatus()
3977 if (scb->scsi_cmd->cmnd[0] == INQUIRY) { ips_chkstatus()
H A Ddpt_i2o.c363 scb[0] = INQUIRY; adpt_inquiry()
461 // TODO: if any luns are at this bus, scsi id then fake a TEST_UNIT_READY and INQUIRY response adpt_queue_lck()
H A Dstex.c608 case INQUIRY: stex_queuecommand_lck()
H A Ddc395x.c1557 if (((srb->cmd->cmnd[0] == INQUIRY) start_scsi()
3461 if (cmd->cmnd[0] == INQUIRY) { srb_done()
3477 /*if( srb->cmd->cmnd[0] == INQUIRY && */ srb_done()
H A Dmvumi.c1475 frame->cdb[0] = INQUIRY; mvumi_inquiry()
H A Du14-34f.c606 char board_id[256]; /* data from INQUIRY on this board */
H A Dscsi_debug.c133 #define DEF_SCSI_LEVEL 6 /* INQUIRY, byte2 [6->SPC-4] */
1877 p[20] |= 0x20; /* should agree with INQUIRY */ resp_format_pg()
H A DBusLogic.c2850 When an INQUIRY command completes normally, save the blogic_process_ccbs()
2854 if (ccb->cdb[0] == INQUIRY && ccb->cdb[1] == 0 && blogic_process_ccbs()
H A Dscsi_error.c1854 scmd->cmnd[0] == INQUIRY)) { scsi_decide_disposition()
H A Dsd.c2667 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) { sd_read_write_same()
H A Datari_NCR5380.c2270 * its INQUIRY data ?!? (maybe only this LUN?) Ok, NCR5380_information_transfer()
H A Dncr53c8xx.c7574 ** Lun control block setup on INQUIRY data received.
7577 ** This setup is done on each INQUIRY since we are expecting user
H A Dqla1280.c2112 * Do not enable sync and ppr for the initial INQUIRY run. We qla1280_config_target()
H A Dadvansys.c2310 ASC_DBG_PRT_HEX((lvl), "INQUIRY", (uchar *) (inq), (len));
8530 INQUIRY,
H A Dipr.c7687 ioarcb->cmd_pkt.cdb[0] = INQUIRY; ipr_ioafp_inquiry()
/linux-4.1.27/drivers/scsi/device_handler/
H A Dscsi_dh_emc.c88 * I/O buffer for both MODE_SELECT and INQUIRY commands.
265 * limited to MODE_SELECT (trespass) and INQUIRY (VPD page 0xC0) commands.
277 (cmd != INQUIRY) ? WRITE : READ, GFP_NOIO); get_req()
298 case INQUIRY: get_req()
324 struct request *rq = get_req(sdev, INQUIRY, csdev->buffer); send_inquiry_cmd()
334 rq->cmd[0] = INQUIRY; send_inquiry_cmd()
342 "%s: failed to send %s INQUIRY: %x\n", send_inquiry_cmd()
476 sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code " clariion_std_inquiry()
523 sdev_printk(KERN_ERR, sdev, "%s: INQUIRY sense code " clariion_send_inquiry()
H A Dscsi_dh_alua.c140 * submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command
153 rq->cmd[0] = INQUIRY; submit_vpd_inquiry()
157 rq->cmd_len = COMMAND_SIZE(INQUIRY); submit_vpd_inquiry()
356 * alua_vpd_inquiry - Evaluate INQUIRY vpd page 0x83
H A Dscsi_dh_rdac.c417 rq->cmd[0] = INQUIRY; submit_inquiry()
421 rq->cmd_len = COMMAND_SIZE(INQUIRY); submit_inquiry()
/linux-4.1.27/include/linux/
H A Dusb_usual.h33 /* INQUIRY response needs faking */ \
/linux-4.1.27/drivers/target/
H A Dtarget_core_ua.c60 * a) if an INQUIRY command enters the enabled command state, the target_scsi3_ua_check()
61 * device server shall process the INQUIRY command and shall neither target_scsi3_ua_check()
73 case INQUIRY: target_scsi3_ua_check()
H A Dtarget_core_alua.h5 * INQUIRY response data, TPGS Field
H A Dtarget_core_spc.c87 * standard INQUIRY data is in the format defined in this spc_emulate_inquiry_std()
271 * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD spc_emulate_evpd_83()
459 /* Extended INQUIRY Data VPD Page */
684 * Only report the INQUIRY EVPD=1 pages after a valid NAA spc_emulate_evpd_00()
711 pr_err("Unable to allocate response buffer for INQUIRY\n"); spc_emulate_inquiry()
722 pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", spc_emulate_inquiry()
1341 case INQUIRY: spc_parse_cdb()
1345 * Do implicit HEAD_OF_QUEUE processing for INQUIRY. spc_parse_cdb()
H A Dtarget_core_pscsi.c212 cdb[0] = INQUIRY; pscsi_get_inquiry_vpd_serial()
248 cdb[0] = INQUIRY; pscsi_get_inquiry_vpd_device_ident()
327 * Setup our standard INQUIRY info into se_dev->t10_wwn pscsi_add_device_to_list()
H A Dtarget_core_alua.c569 case INQUIRY: core_alua_state_standby()
626 case INQUIRY: core_alua_state_unavailable()
666 case INQUIRY: core_alua_state_transition()
H A Dtarget_core_device.c1441 * Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer scsi_dump_inquiry()
1603 * Preload the initial INQUIRY const values if we are doing target_configure_device()
H A Dtarget_core_pr.c104 case INQUIRY: target_scsi2_reservation_check()
479 case INQUIRY: core_scsi3_pr_seq_non_holder()
/linux-4.1.27/drivers/usb/storage/
H A Ddebug.c75 case INQUIRY: what = "INQUIRY"; break; usb_stor_show_command()
H A Dprotocol.c97 /* for INQUIRY, UFI devices only ever return 36 bytes */ usb_stor_ufi_command()
98 case INQUIRY: usb_stor_ufi_command()
H A Doption_ms.c143 /* Additional test for vendor information via INQUIRY, option_ms_init()
H A Dusb.c101 * normally generated by a device through the INQUIRY response will be
280 does store some of the INQUIRY data on the fill_inquiry_response()
365 else if ((us->srb->cmnd[0] == INQUIRY) && usb_stor_control_thread()
371 usb_stor_dbg(us, "Faking INQUIRY command\n"); usb_stor_control_thread()
H A Dtransport.c681 (srb->cmnd[0] == INQUIRY) || usb_stor_invoke_transport()
972 * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI usb_stor_CB_transport()
979 srb->cmnd[0] == INQUIRY) usb_stor_CB_transport()
1225 * by seeing what happens with INQUIRY and READ CAPACITY usb_stor_Bulk_transport()
1230 ((srb->cmnd[0] == INQUIRY && usb_stor_Bulk_transport()
H A Ddatafab.c577 if (srb->cmnd[0] == INQUIRY) { datafab_transport()
578 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); datafab_transport()
H A Djumpshot.c503 if (srb->cmnd[0] == INQUIRY) { jumpshot_transport()
504 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); jumpshot_transport()
H A Dscsiglue.c84 * Set the INQUIRY transfer length to 36. We don't use any of slave_alloc()
309 * INQUIRY result as reserved and requires devices to set them target_alloc()
H A Disd200.c287 * INQUIRY data buffer size
669 (srb->cmnd[0] == INQUIRY) || isd200_invoke_transport()
1236 case INQUIRY: isd200_scsi_to_ata()
1237 usb_stor_dbg(us, " ATA OUT - INQUIRY\n"); isd200_scsi_to_ata()
H A Dsddr55.c824 /* Dummy up a response for INQUIRY since SDDR55 doesn't sddr55_transport()
825 respond to INQUIRY commands */ sddr55_transport()
827 if (srb->cmnd[0] == INQUIRY) { sddr55_transport()
H A Dsddr09.c1575 /* Dummy up a response for INQUIRY since SDDR09 doesn't sddr09_transport()
1576 respond to INQUIRY commands */ sddr09_transport()
1578 if (srb->cmnd[0] == INQUIRY) { sddr09_transport()
H A Dfreecom.c327 case INQUIRY: freecom_transport()
H A Dalauda.c1139 if (srb->cmnd[0] == INQUIRY) { alauda_transport()
1140 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); alauda_transport()
H A Dshuttle_usbat.c1696 if (srb->cmnd[0] == INQUIRY) { usbat_flash_transport()
1697 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); usbat_flash_transport()
H A Dene_ub6250.c2228 case INQUIRY: sd_scsi_irp()
2268 case INQUIRY: ms_scsi_irp()
H A Dunusual_devs.h1068 * - They don't like the INQUIRY command. So we must handle this command
1228 * - It does not like the INQUIRY command. So we must handle this command
/linux-4.1.27/include/trace/events/
H A Dtarget.h30 scsi_opcode_name(INQUIRY), \
H A Dscsi.h28 scsi_opcode_name(INQUIRY), \
/linux-4.1.27/sound/firewire/oxfw/
H A Doxfw-command.c127 buf[0] = 0x02; /* SPECIFIC INQUIRY */ avc_general_inquiry_sig_fmt()
/linux-4.1.27/arch/ia64/hp/sim/
H A Dsimscsi.c224 case INQUIRY: simscsi_queuecommand_lck()
/linux-4.1.27/drivers/usb/gadget/function/
H A Df_mass_storage.c80 * release Information used as a reply to INQUIRY
1105 buf[3] = 2; /* SCSI-2 INQUIRY data format */ do_inquiry()
1742 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and check_command()
1774 * INQUIRY and REQUEST SENSE commands are explicitly allowed check_command()
1777 if (common->cmnd[0] != INQUIRY && check_command()
1785 * If a unit attention condition exists, only INQUIRY and check_command()
1789 common->cmnd[0] != INQUIRY && check_command()
1851 case INQUIRY: do_scsi_command()
1855 "INQUIRY"); do_scsi_command()
/linux-4.1.27/drivers/scsi/aacraid/
H A Daachba.c2373 case INQUIRY: aac_scsi_cmd()
2400 else if ((scsicmd->cmnd[0] != INQUIRY) && /* only INQUIRY & TUR cmnd supported for controller */ aac_scsi_cmd()
2403 dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0])); aac_scsi_cmd()
2418 case INQUIRY: aac_scsi_cmd()
2422 dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid)); aac_scsi_cmd()
3002 if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01) aac_srb_callback()
3045 case INQUIRY: { aac_srb_callback()
H A Dlinit.c547 case INQUIRY: aac_eh_abort()
/linux-4.1.27/drivers/usb/image/
H A Dmicrotek.c242 case INQUIRY: what = "INQUIRY"; break; mts_show_command()
/linux-4.1.27/include/scsi/
H A Dscsi.h69 #define INQUIRY 0x12 macro
548 * where "resp" is a byte array of the response to an INQUIRY. The scsi_level
H A Dscsi_device.h110 char inq_periph_qual; /* PQ from INQUIRY data */
112 unsigned char * inquiry; /* INQUIRY response data */
H A Dscsi_host.h182 * Once the device has responded to an INQUIRY and we know the
195 * responded to INQUIRY and the results of the standard items
/linux-4.1.27/tools/lib/traceevent/
H A Dplugin_scsi.c26 #define INQUIRY 0x12 macro
/linux-4.1.27/drivers/net/wireless/iwlwifi/mvm/
H A Dfw-api-coex.h314 BT_MBOX(2, INQUIRY, 4, 1),
H A Ddebugfs.c396 BT_MBOX_PRINT(2, INQUIRY, false); iwl_mvm_coex_dump_mbox()
455 BT_MBOX_PRINT(2, INQUIRY, false); iwl_mvm_coex_dump_mbox_old()
/linux-4.1.27/drivers/staging/rts5208/
H A Drtsx.c74 * Set the INQUIRY transfer length to 36. We don't use any of slave_alloc()
98 * which simply have broken INQUIRY data). slave_configure()
H A Drtsx_scsi.c77 case INQUIRY: scsi_show_command()
78 what = "INQUIRY"; scsi_show_command()
3450 (srb->cmnd[0] != INQUIRY)) { rtsx_scsi_handler()
3474 case INQUIRY: rtsx_scsi_handler()
/linux-4.1.27/drivers/ata/
H A Dlibata-scsi.c1971 * ata_scsiop_inq_std - Simulate INQUIRY command
1976 * with non-VPD INQUIRY command output.
2047 * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages
2074 * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number
2099 * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity
2158 * ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info
2712 if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { atapi_qc_complete()
3569 case INQUIRY: ata_scsi_simulate()
/linux-4.1.27/drivers/media/firewire/
H A Dfiredtv-avc.c153 [0x2] = "SPECIFIC INQUIRY", [0x3] = "NOTIFY", debug_fcp_ctype()
154 [0x4] = "GENERAL INQUIRY", [0x8] = "NOT IMPLEMENTED", debug_fcp_ctype()
/linux-4.1.27/drivers/scsi/arm/
H A Dfas216.c492 * synchronous negotiation on each REQUEST SENSE and INQUIRY command.
502 * every INQUIRY or REQUEST SENSE message, unless the target itself has
1795 SCpnt->cmnd[0] == INQUIRY)) { fas216_start_command()
1816 SCpnt->cmnd[0] != INQUIRY) { fas216_allocate_tag()
2075 case INQUIRY: fas216_std_done()
H A Dacornscsi.c1710 host->SCpnt->cmnd[0] == INQUIRY) acornscsi_buildmessages()
/linux-4.1.27/drivers/block/
H A Dskd_main.c1921 case INQUIRY: skd_send_internal_skspcl()
1922 scsi->cdb[0] = INQUIRY; skd_send_internal_skspcl()
2116 skd_send_internal_skspcl(skdev, skspcl, INQUIRY); skd_complete_internal()
2124 skd_send_internal_skspcl(skdev, skspcl, INQUIRY); skd_complete_internal()
2133 case INQUIRY: skd_complete_internal()
2647 else if (cdb[0] != INQUIRY) skd_do_driver_inq()
2648 return; /* Not an INQUIRY */ skd_do_driver_inq()
H A DDAC960.c1067 CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */ DAC960_V2_ConstructNewUnitSerialNumber()
2036 DCDB->CDB[0] = 0x12; /* INQUIRY */ DAC960_V1_ReadDeviceConfiguration()
2081 DCDB->CDB[0] = 0x12; /* INQUIRY */ DAC960_V1_ReadDeviceConfiguration()
4183 DCDB->CDB[0] = 0x12; /* INQUIRY */ DAC960_V1_ProcessCompletedCommand()
4214 DCDB->CDB[0] = 0x12; /* INQUIRY */ DAC960_V1_ProcessCompletedCommand()
H A DDAC960.h120 Define the SCSI INQUIRY Standard Data structure.
155 Define the SCSI INQUIRY Unit Serial Number structure.
H A Dnvme-scsi.c669 /* INQUIRY Helper Functions */
2981 case INQUIRY: nvme_scsi_translate()
/linux-4.1.27/drivers/scsi/bfa/
H A Dbfi_ms.h730 * ex. SCSI INQUIRY where transferred
/linux-4.1.27/block/
H A Dscsi_ioctl.c137 __set_bit(INQUIRY, filter->read_ok); blk_set_cmd_filter_defaults()
/linux-4.1.27/drivers/scsi/esas2r/
H A Desas2r_main.c1280 } else if ((rq->vrq->scsi.cdb[0] != INQUIRY esas2r_log_request_failure()
1285 (rq->vrq->scsi.cdb[0] == INQUIRY)) { esas2r_log_request_failure()
/linux-4.1.27/drivers/staging/unisys/virthba/
H A Dvirthba.c994 if ((cmdrsp->scsi.cmnd[0] == INQUIRY) && do_scsi_linuxstat()
1027 if ((cmdrsp->scsi.cmnd[0] == INQUIRY) && do_scsi_nolinuxstat()
/linux-4.1.27/drivers/ide/
H A Dide-tape.c889 pc->c[0] = INQUIRY; idetape_create_inquiry_cmd()
1610 printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", idetape_get_inquiry_results()
/linux-4.1.27/drivers/message/fusion/
H A Dmptscsih.c2729 if (req->u.scsireq.CDB[0] == INQUIRY) mptscsih_get_completion_code()
2810 case INQUIRY: mptscsih_do_cmd()
H A Dmptspi.c326 * sane & valid STANDARD INQUIRY data!
/linux-4.1.27/drivers/scsi/megaraid/
H A Dmegaraid_mbox.c1581 case INQUIRY: megaraid_mbox_build_cmd()
2305 if (scp->cmnd[0] == INQUIRY && status == 0 && islogical == 0 megaraid_mbox_dpc()
/linux-4.1.27/drivers/firewire/
H A Dsbp2.c700 * - Login, INQUIRY, and high-level SCSI setup of all of the target's
/linux-4.1.27/drivers/scsi/sym53c8xx_2/
H A Dsym_hipd.c5224 * Always negotiate on INQUIRY and REQUEST SENSE. sym_queue_scsiio()
5229 cmd->cmnd[0] == INQUIRY || cmd->cmnd[0] == REQUEST_SENSE) && sym_queue_scsiio()
5760 * first INQUIRY response received. sym_hcb_attach()
/linux-4.1.27/drivers/usb/gadget/legacy/
H A Dtcm_usb_gadget.c912 case INQUIRY: get_cmd_dir()
/linux-4.1.27/drivers/scsi/arcmsr/
H A Darcmsr_hba.c2490 case INQUIRY: { arcmsr_handle_virtual_command()

Completed in 1824 milliseconds