1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of version 2 of the GNU General Public License as
13  * published by the Free Software Foundation.
14  *
15  * This program is distributed in the hope that it will be useful, but
16  * WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
23  * USA
24  *
25  * The full GNU General Public License is included in this distribution
26  * in the file called COPYING.
27  *
28  * Contact Information:
29  *  Intel Linux Wireless <ilw@linux.intel.com>
30  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
31  *
32  * BSD LICENSE
33  *
34  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
35  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
36  * All rights reserved.
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  *
42  *  * Redistributions of source code must retain the above copyright
43  *    notice, this list of conditions and the following disclaimer.
44  *  * Redistributions in binary form must reproduce the above copyright
45  *    notice, this list of conditions and the following disclaimer in
46  *    the documentation and/or other materials provided with the
47  *    distribution.
48  *  * Neither the name Intel Corporation nor the names of its
49  *    contributors may be used to endorse or promote products derived
50  *    from this software without specific prior written permission.
51  *
52  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
53  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
54  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
55  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
56  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
57  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
58  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
59  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
60  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
61  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
62  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
63  *
64  *****************************************************************************/
65 
66 #ifndef __fw_api_h__
67 #define __fw_api_h__
68 
69 #include "fw-api-rs.h"
70 #include "fw-api-tx.h"
71 #include "fw-api-sta.h"
72 #include "fw-api-mac.h"
73 #include "fw-api-power.h"
74 #include "fw-api-d3.h"
75 #include "fw-api-coex.h"
76 #include "fw-api-scan.h"
77 #include "fw-api-stats.h"
78 
79 /* Tx queue numbers */
80 enum {
81 	IWL_MVM_OFFCHANNEL_QUEUE = 8,
82 	IWL_MVM_CMD_QUEUE = 9,
83 };
84 
85 enum iwl_mvm_tx_fifo {
86 	IWL_MVM_TX_FIFO_BK = 0,
87 	IWL_MVM_TX_FIFO_BE,
88 	IWL_MVM_TX_FIFO_VI,
89 	IWL_MVM_TX_FIFO_VO,
90 	IWL_MVM_TX_FIFO_MCAST = 5,
91 	IWL_MVM_TX_FIFO_CMD = 7,
92 };
93 
94 #define IWL_MVM_STATION_COUNT	16
95 
96 #define IWL_MVM_TDLS_STA_COUNT	4
97 
98 /* commands */
99 enum {
100 	MVM_ALIVE = 0x1,
101 	REPLY_ERROR = 0x2,
102 
103 	INIT_COMPLETE_NOTIF = 0x4,
104 
105 	/* PHY context commands */
106 	PHY_CONTEXT_CMD = 0x8,
107 	DBG_CFG = 0x9,
108 	ANTENNA_COUPLING_NOTIFICATION = 0xa,
109 
110 	/* UMAC scan commands */
111 	SCAN_CFG_CMD = 0xc,
112 	SCAN_REQ_UMAC = 0xd,
113 	SCAN_ABORT_UMAC = 0xe,
114 	SCAN_COMPLETE_UMAC = 0xf,
115 
116 	/* station table */
117 	ADD_STA_KEY = 0x17,
118 	ADD_STA = 0x18,
119 	REMOVE_STA = 0x19,
120 
121 	/* TX */
122 	TX_CMD = 0x1c,
123 	TXPATH_FLUSH = 0x1e,
124 	MGMT_MCAST_KEY = 0x1f,
125 
126 	/* scheduler config */
127 	SCD_QUEUE_CFG = 0x1d,
128 
129 	/* global key */
130 	WEP_KEY = 0x20,
131 
132 	/* Memory */
133 	SHARED_MEM_CFG = 0x25,
134 
135 	/* TDLS */
136 	TDLS_CHANNEL_SWITCH_CMD = 0x27,
137 	TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa,
138 	TDLS_CONFIG_CMD = 0xa7,
139 
140 	/* MAC and Binding commands */
141 	MAC_CONTEXT_CMD = 0x28,
142 	TIME_EVENT_CMD = 0x29, /* both CMD and response */
143 	TIME_EVENT_NOTIFICATION = 0x2a,
144 	BINDING_CONTEXT_CMD = 0x2b,
145 	TIME_QUOTA_CMD = 0x2c,
146 	NON_QOS_TX_COUNTER_CMD = 0x2d,
147 
148 	LQ_CMD = 0x4e,
149 
150 	/* Calibration */
151 	TEMPERATURE_NOTIFICATION = 0x62,
152 	CALIBRATION_CFG_CMD = 0x65,
153 	CALIBRATION_RES_NOTIFICATION = 0x66,
154 	CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
155 	RADIO_VERSION_NOTIFICATION = 0x68,
156 
157 	/* Scan offload */
158 	SCAN_OFFLOAD_REQUEST_CMD = 0x51,
159 	SCAN_OFFLOAD_ABORT_CMD = 0x52,
160 	HOT_SPOT_CMD = 0x53,
161 	SCAN_OFFLOAD_COMPLETE = 0x6D,
162 	SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
163 	SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
164 	MATCH_FOUND_NOTIFICATION = 0xd9,
165 	SCAN_ITERATION_COMPLETE = 0xe7,
166 
167 	/* Phy */
168 	PHY_CONFIGURATION_CMD = 0x6a,
169 	CALIB_RES_NOTIF_PHY_DB = 0x6b,
170 	/* PHY_DB_CMD = 0x6c, */
171 
172 	/* Power - legacy power table command */
173 	POWER_TABLE_CMD = 0x77,
174 	PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
175 	LTR_CONFIG = 0xee,
176 
177 	/* Thermal Throttling*/
178 	REPLY_THERMAL_MNG_BACKOFF = 0x7e,
179 
180 	/* Scanning */
181 	SCAN_REQUEST_CMD = 0x80,
182 	SCAN_ABORT_CMD = 0x81,
183 	SCAN_START_NOTIFICATION = 0x82,
184 	SCAN_RESULTS_NOTIFICATION = 0x83,
185 	SCAN_COMPLETE_NOTIFICATION = 0x84,
186 
187 	/* NVM */
188 	NVM_ACCESS_CMD = 0x88,
189 
190 	SET_CALIB_DEFAULT_CMD = 0x8e,
191 
192 	BEACON_NOTIFICATION = 0x90,
193 	BEACON_TEMPLATE_CMD = 0x91,
194 	TX_ANT_CONFIGURATION_CMD = 0x98,
195 	STATISTICS_CMD = 0x9c,
196 	STATISTICS_NOTIFICATION = 0x9d,
197 	EOSP_NOTIFICATION = 0x9e,
198 	REDUCE_TX_POWER_CMD = 0x9f,
199 
200 	/* RF-KILL commands and notifications */
201 	CARD_STATE_CMD = 0xa0,
202 	CARD_STATE_NOTIFICATION = 0xa1,
203 
204 	MISSED_BEACONS_NOTIFICATION = 0xa2,
205 
206 	/* Power - new power table command */
207 	MAC_PM_POWER_TABLE = 0xa9,
208 
209 	MFUART_LOAD_NOTIFICATION = 0xb1,
210 
211 	REPLY_RX_PHY_CMD = 0xc0,
212 	REPLY_RX_MPDU_CMD = 0xc1,
213 	BA_NOTIF = 0xc5,
214 
215 	/* Location Aware Regulatory */
216 	MCC_UPDATE_CMD = 0xc8,
217 	MCC_CHUB_UPDATE_CMD = 0xc9,
218 
219 	MARKER_CMD = 0xcb,
220 
221 	/* BT Coex */
222 	BT_COEX_PRIO_TABLE = 0xcc,
223 	BT_COEX_PROT_ENV = 0xcd,
224 	BT_PROFILE_NOTIFICATION = 0xce,
225 	BT_CONFIG = 0x9b,
226 	BT_COEX_UPDATE_SW_BOOST = 0x5a,
227 	BT_COEX_UPDATE_CORUN_LUT = 0x5b,
228 	BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
229 	BT_COEX_CI = 0x5d,
230 
231 	REPLY_SF_CFG_CMD = 0xd1,
232 	REPLY_BEACON_FILTERING_CMD = 0xd2,
233 
234 	/* DTS measurements */
235 	CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
236 	DTS_MEASUREMENT_NOTIFICATION = 0xdd,
237 
238 	REPLY_DEBUG_CMD = 0xf0,
239 	DEBUG_LOG_MSG = 0xf7,
240 
241 	BCAST_FILTER_CMD = 0xcf,
242 	MCAST_FILTER_CMD = 0xd0,
243 
244 	/* D3 commands/notifications */
245 	D3_CONFIG_CMD = 0xd3,
246 	PROT_OFFLOAD_CONFIG_CMD = 0xd4,
247 	OFFLOADS_QUERY_CMD = 0xd5,
248 	REMOTE_WAKE_CONFIG_CMD = 0xd6,
249 	D0I3_END_CMD = 0xed,
250 
251 	/* for WoWLAN in particular */
252 	WOWLAN_PATTERNS = 0xe0,
253 	WOWLAN_CONFIGURATION = 0xe1,
254 	WOWLAN_TSC_RSC_PARAM = 0xe2,
255 	WOWLAN_TKIP_PARAM = 0xe3,
256 	WOWLAN_KEK_KCK_MATERIAL = 0xe4,
257 	WOWLAN_GET_STATUSES = 0xe5,
258 	WOWLAN_TX_POWER_PER_DB = 0xe6,
259 
260 	/* and for NetDetect */
261 	SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56,
262 	SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58,
263 	SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59,
264 
265 	REPLY_MAX = 0xff,
266 };
267 
268 /**
269  * struct iwl_cmd_response - generic response struct for most commands
270  * @status: status of the command asked, changes for each one
271  */
272 struct iwl_cmd_response {
273 	__le32 status;
274 };
275 
276 /*
277  * struct iwl_tx_ant_cfg_cmd
278  * @valid: valid antenna configuration
279  */
280 struct iwl_tx_ant_cfg_cmd {
281 	__le32 valid;
282 } __packed;
283 
284 /*
285  * Calibration control struct.
286  * Sent as part of the phy configuration command.
287  * @flow_trigger: bitmap for which calibrations to perform according to
288  *		flow triggers.
289  * @event_trigger: bitmap for which calibrations to perform according to
290  *		event triggers.
291  */
292 struct iwl_calib_ctrl {
293 	__le32 flow_trigger;
294 	__le32 event_trigger;
295 } __packed;
296 
297 /* This enum defines the bitmap of various calibrations to enable in both
298  * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
299  */
300 enum iwl_calib_cfg {
301 	IWL_CALIB_CFG_XTAL_IDX			= BIT(0),
302 	IWL_CALIB_CFG_TEMPERATURE_IDX		= BIT(1),
303 	IWL_CALIB_CFG_VOLTAGE_READ_IDX		= BIT(2),
304 	IWL_CALIB_CFG_PAPD_IDX			= BIT(3),
305 	IWL_CALIB_CFG_TX_PWR_IDX		= BIT(4),
306 	IWL_CALIB_CFG_DC_IDX			= BIT(5),
307 	IWL_CALIB_CFG_BB_FILTER_IDX		= BIT(6),
308 	IWL_CALIB_CFG_LO_LEAKAGE_IDX		= BIT(7),
309 	IWL_CALIB_CFG_TX_IQ_IDX			= BIT(8),
310 	IWL_CALIB_CFG_TX_IQ_SKEW_IDX		= BIT(9),
311 	IWL_CALIB_CFG_RX_IQ_IDX			= BIT(10),
312 	IWL_CALIB_CFG_RX_IQ_SKEW_IDX		= BIT(11),
313 	IWL_CALIB_CFG_SENSITIVITY_IDX		= BIT(12),
314 	IWL_CALIB_CFG_CHAIN_NOISE_IDX		= BIT(13),
315 	IWL_CALIB_CFG_DISCONNECTED_ANT_IDX	= BIT(14),
316 	IWL_CALIB_CFG_ANT_COUPLING_IDX		= BIT(15),
317 	IWL_CALIB_CFG_DAC_IDX			= BIT(16),
318 	IWL_CALIB_CFG_ABS_IDX			= BIT(17),
319 	IWL_CALIB_CFG_AGC_IDX			= BIT(18),
320 };
321 
322 /*
323  * Phy configuration command.
324  */
325 struct iwl_phy_cfg_cmd {
326 	__le32	phy_cfg;
327 	struct iwl_calib_ctrl calib_control;
328 } __packed;
329 
330 #define PHY_CFG_RADIO_TYPE	(BIT(0) | BIT(1))
331 #define PHY_CFG_RADIO_STEP	(BIT(2) | BIT(3))
332 #define PHY_CFG_RADIO_DASH	(BIT(4) | BIT(5))
333 #define PHY_CFG_PRODUCT_NUMBER	(BIT(6) | BIT(7))
334 #define PHY_CFG_TX_CHAIN_A	BIT(8)
335 #define PHY_CFG_TX_CHAIN_B	BIT(9)
336 #define PHY_CFG_TX_CHAIN_C	BIT(10)
337 #define PHY_CFG_RX_CHAIN_A	BIT(12)
338 #define PHY_CFG_RX_CHAIN_B	BIT(13)
339 #define PHY_CFG_RX_CHAIN_C	BIT(14)
340 
341 
342 /* Target of the NVM_ACCESS_CMD */
343 enum {
344 	NVM_ACCESS_TARGET_CACHE = 0,
345 	NVM_ACCESS_TARGET_OTP = 1,
346 	NVM_ACCESS_TARGET_EEPROM = 2,
347 };
348 
349 /* Section types for NVM_ACCESS_CMD */
350 enum {
351 	NVM_SECTION_TYPE_SW = 1,
352 	NVM_SECTION_TYPE_REGULATORY = 3,
353 	NVM_SECTION_TYPE_CALIBRATION = 4,
354 	NVM_SECTION_TYPE_PRODUCTION = 5,
355 	NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
356 	NVM_SECTION_TYPE_PHY_SKU = 12,
357 	NVM_MAX_NUM_SECTIONS = 13,
358 };
359 
360 /**
361  * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section
362  * @op_code: 0 - read, 1 - write
363  * @target: NVM_ACCESS_TARGET_*
364  * @type: NVM_SECTION_TYPE_*
365  * @offset: offset in bytes into the section
366  * @length: in bytes, to read/write
367  * @data: if write operation, the data to write. On read its empty
368  */
369 struct iwl_nvm_access_cmd {
370 	u8 op_code;
371 	u8 target;
372 	__le16 type;
373 	__le16 offset;
374 	__le16 length;
375 	u8 data[];
376 } __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */
377 
378 /**
379  * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD
380  * @offset: offset in bytes into the section
381  * @length: in bytes, either how much was written or read
382  * @type: NVM_SECTION_TYPE_*
383  * @status: 0 for success, fail otherwise
384  * @data: if read operation, the data returned. Empty on write.
385  */
386 struct iwl_nvm_access_resp {
387 	__le16 offset;
388 	__le16 length;
389 	__le16 type;
390 	__le16 status;
391 	u8 data[];
392 } __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */
393 
394 /* MVM_ALIVE 0x1 */
395 
396 /* alive response is_valid values */
397 #define ALIVE_RESP_UCODE_OK	BIT(0)
398 #define ALIVE_RESP_RFKILL	BIT(1)
399 
400 /* alive response ver_type values */
401 enum {
402 	FW_TYPE_HW = 0,
403 	FW_TYPE_PROT = 1,
404 	FW_TYPE_AP = 2,
405 	FW_TYPE_WOWLAN = 3,
406 	FW_TYPE_TIMING = 4,
407 	FW_TYPE_WIPAN = 5
408 };
409 
410 /* alive response ver_subtype values */
411 enum {
412 	FW_SUBTYPE_FULL_FEATURE = 0,
413 	FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */
414 	FW_SUBTYPE_REDUCED = 2,
415 	FW_SUBTYPE_ALIVE_ONLY = 3,
416 	FW_SUBTYPE_WOWLAN = 4,
417 	FW_SUBTYPE_AP_SUBTYPE = 5,
418 	FW_SUBTYPE_WIPAN = 6,
419 	FW_SUBTYPE_INITIALIZE = 9
420 };
421 
422 #define IWL_ALIVE_STATUS_ERR 0xDEAD
423 #define IWL_ALIVE_STATUS_OK 0xCAFE
424 
425 #define IWL_ALIVE_FLG_RFKILL	BIT(0)
426 
427 struct mvm_alive_resp_ver1 {
428 	__le16 status;
429 	__le16 flags;
430 	u8 ucode_minor;
431 	u8 ucode_major;
432 	__le16 id;
433 	u8 api_minor;
434 	u8 api_major;
435 	u8 ver_subtype;
436 	u8 ver_type;
437 	u8 mac;
438 	u8 opt;
439 	__le16 reserved2;
440 	__le32 timestamp;
441 	__le32 error_event_table_ptr;	/* SRAM address for error log */
442 	__le32 log_event_table_ptr;	/* SRAM address for event log */
443 	__le32 cpu_register_ptr;
444 	__le32 dbgm_config_ptr;
445 	__le32 alive_counter_ptr;
446 	__le32 scd_base_ptr;		/* SRAM address for SCD */
447 } __packed; /* ALIVE_RES_API_S_VER_1 */
448 
449 struct mvm_alive_resp_ver2 {
450 	__le16 status;
451 	__le16 flags;
452 	u8 ucode_minor;
453 	u8 ucode_major;
454 	__le16 id;
455 	u8 api_minor;
456 	u8 api_major;
457 	u8 ver_subtype;
458 	u8 ver_type;
459 	u8 mac;
460 	u8 opt;
461 	__le16 reserved2;
462 	__le32 timestamp;
463 	__le32 error_event_table_ptr;	/* SRAM address for error log */
464 	__le32 log_event_table_ptr;	/* SRAM address for LMAC event log */
465 	__le32 cpu_register_ptr;
466 	__le32 dbgm_config_ptr;
467 	__le32 alive_counter_ptr;
468 	__le32 scd_base_ptr;		/* SRAM address for SCD */
469 	__le32 st_fwrd_addr;		/* pointer to Store and forward */
470 	__le32 st_fwrd_size;
471 	u8 umac_minor;			/* UMAC version: minor */
472 	u8 umac_major;			/* UMAC version: major */
473 	__le16 umac_id;			/* UMAC version: id */
474 	__le32 error_info_addr;		/* SRAM address for UMAC error log */
475 	__le32 dbg_print_buff_addr;
476 } __packed; /* ALIVE_RES_API_S_VER_2 */
477 
478 struct mvm_alive_resp {
479 	__le16 status;
480 	__le16 flags;
481 	__le32 ucode_minor;
482 	__le32 ucode_major;
483 	u8 ver_subtype;
484 	u8 ver_type;
485 	u8 mac;
486 	u8 opt;
487 	__le32 timestamp;
488 	__le32 error_event_table_ptr;	/* SRAM address for error log */
489 	__le32 log_event_table_ptr;	/* SRAM address for LMAC event log */
490 	__le32 cpu_register_ptr;
491 	__le32 dbgm_config_ptr;
492 	__le32 alive_counter_ptr;
493 	__le32 scd_base_ptr;		/* SRAM address for SCD */
494 	__le32 st_fwrd_addr;		/* pointer to Store and forward */
495 	__le32 st_fwrd_size;
496 	__le32 umac_minor;		/* UMAC version: minor */
497 	__le32 umac_major;		/* UMAC version: major */
498 	__le32 error_info_addr;		/* SRAM address for UMAC error log */
499 	__le32 dbg_print_buff_addr;
500 } __packed; /* ALIVE_RES_API_S_VER_3 */
501 
502 /* Error response/notification */
503 enum {
504 	FW_ERR_UNKNOWN_CMD = 0x0,
505 	FW_ERR_INVALID_CMD_PARAM = 0x1,
506 	FW_ERR_SERVICE = 0x2,
507 	FW_ERR_ARC_MEMORY = 0x3,
508 	FW_ERR_ARC_CODE = 0x4,
509 	FW_ERR_WATCH_DOG = 0x5,
510 	FW_ERR_WEP_GRP_KEY_INDX = 0x10,
511 	FW_ERR_WEP_KEY_SIZE = 0x11,
512 	FW_ERR_OBSOLETE_FUNC = 0x12,
513 	FW_ERR_UNEXPECTED = 0xFE,
514 	FW_ERR_FATAL = 0xFF
515 };
516 
517 /**
518  * struct iwl_error_resp - FW error indication
519  * ( REPLY_ERROR = 0x2 )
520  * @error_type: one of FW_ERR_*
521  * @cmd_id: the command ID for which the error occured
522  * @bad_cmd_seq_num: sequence number of the erroneous command
523  * @error_service: which service created the error, applicable only if
524  *	error_type = 2, otherwise 0
525  * @timestamp: TSF in usecs.
526  */
527 struct iwl_error_resp {
528 	__le32 error_type;
529 	u8 cmd_id;
530 	u8 reserved1;
531 	__le16 bad_cmd_seq_num;
532 	__le32 error_service;
533 	__le64 timestamp;
534 } __packed;
535 
536 
537 /* Common PHY, MAC and Bindings definitions */
538 
539 #define MAX_MACS_IN_BINDING	(3)
540 #define MAX_BINDINGS		(4)
541 #define AUX_BINDING_INDEX	(3)
542 #define MAX_PHYS		(4)
543 
544 /* Used to extract ID and color from the context dword */
545 #define FW_CTXT_ID_POS	  (0)
546 #define FW_CTXT_ID_MSK	  (0xff << FW_CTXT_ID_POS)
547 #define FW_CTXT_COLOR_POS (8)
548 #define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS)
549 #define FW_CTXT_INVALID	  (0xffffffff)
550 
551 #define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\
552 					  (_color << FW_CTXT_COLOR_POS))
553 
554 /* Possible actions on PHYs, MACs and Bindings */
555 enum {
556 	FW_CTXT_ACTION_STUB = 0,
557 	FW_CTXT_ACTION_ADD,
558 	FW_CTXT_ACTION_MODIFY,
559 	FW_CTXT_ACTION_REMOVE,
560 	FW_CTXT_ACTION_NUM
561 }; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */
562 
563 /* Time Events */
564 
565 /* Time Event types, according to MAC type */
566 enum iwl_time_event_type {
567 	/* BSS Station Events */
568 	TE_BSS_STA_AGGRESSIVE_ASSOC,
569 	TE_BSS_STA_ASSOC,
570 	TE_BSS_EAP_DHCP_PROT,
571 	TE_BSS_QUIET_PERIOD,
572 
573 	/* P2P Device Events */
574 	TE_P2P_DEVICE_DISCOVERABLE,
575 	TE_P2P_DEVICE_LISTEN,
576 	TE_P2P_DEVICE_ACTION_SCAN,
577 	TE_P2P_DEVICE_FULL_SCAN,
578 
579 	/* P2P Client Events */
580 	TE_P2P_CLIENT_AGGRESSIVE_ASSOC,
581 	TE_P2P_CLIENT_ASSOC,
582 	TE_P2P_CLIENT_QUIET_PERIOD,
583 
584 	/* P2P GO Events */
585 	TE_P2P_GO_ASSOC_PROT,
586 	TE_P2P_GO_REPETITIVE_NOA,
587 	TE_P2P_GO_CT_WINDOW,
588 
589 	/* WiDi Sync Events */
590 	TE_WIDI_TX_SYNC,
591 
592 	/* Channel Switch NoA */
593 	TE_CHANNEL_SWITCH_PERIOD,
594 
595 	TE_MAX
596 }; /* MAC_EVENT_TYPE_API_E_VER_1 */
597 
598 
599 
600 /* Time event - defines for command API v1 */
601 
602 /*
603  * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed.
604  * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only
605  *	the first fragment is scheduled.
606  * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only
607  *	the first 2 fragments are scheduled.
608  * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
609  *	number of fragments are valid.
610  *
611  * Other than the constant defined above, specifying a fragmentation value 'x'
612  * means that the event can be fragmented but only the first 'x' will be
613  * scheduled.
614  */
615 enum {
616 	TE_V1_FRAG_NONE = 0,
617 	TE_V1_FRAG_SINGLE = 1,
618 	TE_V1_FRAG_DUAL = 2,
619 	TE_V1_FRAG_ENDLESS = 0xffffffff
620 };
621 
622 /* If a Time Event can be fragmented, this is the max number of fragments */
623 #define TE_V1_FRAG_MAX_MSK	0x0fffffff
624 /* Repeat the time event endlessly (until removed) */
625 #define TE_V1_REPEAT_ENDLESS	0xffffffff
626 /* If a Time Event has bounded repetitions, this is the maximal value */
627 #define TE_V1_REPEAT_MAX_MSK_V1	0x0fffffff
628 
629 /* Time Event dependencies: none, on another TE, or in a specific time */
630 enum {
631 	TE_V1_INDEPENDENT		= 0,
632 	TE_V1_DEP_OTHER			= BIT(0),
633 	TE_V1_DEP_TSF			= BIT(1),
634 	TE_V1_EVENT_SOCIOPATHIC		= BIT(2),
635 }; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */
636 
637 /*
638  * @TE_V1_NOTIF_NONE: no notifications
639  * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start
640  * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end
641  * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use
642  * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use.
643  * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start
644  * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end
645  * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use.
646  * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use.
647  *
648  * Supported Time event notifications configuration.
649  * A notification (both event and fragment) includes a status indicating weather
650  * the FW was able to schedule the event or not. For fragment start/end
651  * notification the status is always success. There is no start/end fragment
652  * notification for monolithic events.
653  */
654 enum {
655 	TE_V1_NOTIF_NONE = 0,
656 	TE_V1_NOTIF_HOST_EVENT_START = BIT(0),
657 	TE_V1_NOTIF_HOST_EVENT_END = BIT(1),
658 	TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2),
659 	TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3),
660 	TE_V1_NOTIF_HOST_FRAG_START = BIT(4),
661 	TE_V1_NOTIF_HOST_FRAG_END = BIT(5),
662 	TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6),
663 	TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7),
664 }; /* MAC_EVENT_ACTION_API_E_VER_2 */
665 
666 /* Time event - defines for command API */
667 
668 /*
669  * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
670  * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
671  *  the first fragment is scheduled.
672  * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
673  *  the first 2 fragments are scheduled.
674  * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
675  *  number of fragments are valid.
676  *
677  * Other than the constant defined above, specifying a fragmentation value 'x'
678  * means that the event can be fragmented but only the first 'x' will be
679  * scheduled.
680  */
681 enum {
682 	TE_V2_FRAG_NONE = 0,
683 	TE_V2_FRAG_SINGLE = 1,
684 	TE_V2_FRAG_DUAL = 2,
685 	TE_V2_FRAG_MAX = 0xfe,
686 	TE_V2_FRAG_ENDLESS = 0xff
687 };
688 
689 /* Repeat the time event endlessly (until removed) */
690 #define TE_V2_REPEAT_ENDLESS	0xff
691 /* If a Time Event has bounded repetitions, this is the maximal value */
692 #define TE_V2_REPEAT_MAX	0xfe
693 
694 #define TE_V2_PLACEMENT_POS	12
695 #define TE_V2_ABSENCE_POS	15
696 
697 /* Time event policy values
698  * A notification (both event and fragment) includes a status indicating weather
699  * the FW was able to schedule the event or not. For fragment start/end
700  * notification the status is always success. There is no start/end fragment
701  * notification for monolithic events.
702  *
703  * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
704  * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
705  * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
706  * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
707  * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
708  * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
709  * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
710  * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
711  * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
712  * @TE_V2_DEP_OTHER: depends on another time event
713  * @TE_V2_DEP_TSF: depends on a specific time
714  * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC
715  * @TE_V2_ABSENCE: are we present or absent during the Time Event.
716  */
717 enum {
718 	TE_V2_DEFAULT_POLICY = 0x0,
719 
720 	/* notifications (event start/stop, fragment start/stop) */
721 	TE_V2_NOTIF_HOST_EVENT_START = BIT(0),
722 	TE_V2_NOTIF_HOST_EVENT_END = BIT(1),
723 	TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2),
724 	TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3),
725 
726 	TE_V2_NOTIF_HOST_FRAG_START = BIT(4),
727 	TE_V2_NOTIF_HOST_FRAG_END = BIT(5),
728 	TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6),
729 	TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7),
730 	T2_V2_START_IMMEDIATELY = BIT(11),
731 
732 	TE_V2_NOTIF_MSK = 0xff,
733 
734 	/* placement characteristics */
735 	TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS),
736 	TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1),
737 	TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2),
738 
739 	/* are we present or absent during the Time Event. */
740 	TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS),
741 };
742 
743 /**
744  * struct iwl_time_event_cmd_api - configuring Time Events
745  * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
746  * with version 1. determined by IWL_UCODE_TLV_FLAGS)
747  * ( TIME_EVENT_CMD = 0x29 )
748  * @id_and_color: ID and color of the relevant MAC
749  * @action: action to perform, one of FW_CTXT_ACTION_*
750  * @id: this field has two meanings, depending on the action:
751  *	If the action is ADD, then it means the type of event to add.
752  *	For all other actions it is the unique event ID assigned when the
753  *	event was added by the FW.
754  * @apply_time: When to start the Time Event (in GP2)
755  * @max_delay: maximum delay to event's start (apply time), in TU
756  * @depends_on: the unique ID of the event we depend on (if any)
757  * @interval: interval between repetitions, in TU
758  * @duration: duration of event in TU
759  * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS
760  * @max_frags: maximal number of fragments the Time Event can be divided to
761  * @policy: defines whether uCode shall notify the host or other uCode modules
762  *	on event and/or fragment start and/or end
763  *	using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF
764  *	TE_EVENT_SOCIOPATHIC
765  *	using TE_ABSENCE and using TE_NOTIF_*
766  */
767 struct iwl_time_event_cmd {
768 	/* COMMON_INDEX_HDR_API_S_VER_1 */
769 	__le32 id_and_color;
770 	__le32 action;
771 	__le32 id;
772 	/* MAC_TIME_EVENT_DATA_API_S_VER_2 */
773 	__le32 apply_time;
774 	__le32 max_delay;
775 	__le32 depends_on;
776 	__le32 interval;
777 	__le32 duration;
778 	u8 repeat;
779 	u8 max_frags;
780 	__le16 policy;
781 } __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */
782 
783 /**
784  * struct iwl_time_event_resp - response structure to iwl_time_event_cmd
785  * @status: bit 0 indicates success, all others specify errors
786  * @id: the Time Event type
787  * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
788  * @id_and_color: ID and color of the relevant MAC
789  */
790 struct iwl_time_event_resp {
791 	__le32 status;
792 	__le32 id;
793 	__le32 unique_id;
794 	__le32 id_and_color;
795 } __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */
796 
797 /**
798  * struct iwl_time_event_notif - notifications of time event start/stop
799  * ( TIME_EVENT_NOTIFICATION = 0x2a )
800  * @timestamp: action timestamp in GP2
801  * @session_id: session's unique id
802  * @unique_id: unique id of the Time Event itself
803  * @id_and_color: ID and color of the relevant MAC
804  * @action: one of TE_NOTIF_START or TE_NOTIF_END
805  * @status: true if scheduled, false otherwise (not executed)
806  */
807 struct iwl_time_event_notif {
808 	__le32 timestamp;
809 	__le32 session_id;
810 	__le32 unique_id;
811 	__le32 id_and_color;
812 	__le32 action;
813 	__le32 status;
814 } __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */
815 
816 
817 /* Bindings and Time Quota */
818 
819 /**
820  * struct iwl_binding_cmd - configuring bindings
821  * ( BINDING_CONTEXT_CMD = 0x2b )
822  * @id_and_color: ID and color of the relevant Binding
823  * @action: action to perform, one of FW_CTXT_ACTION_*
824  * @macs: array of MAC id and colors which belong to the binding
825  * @phy: PHY id and color which belongs to the binding
826  */
827 struct iwl_binding_cmd {
828 	/* COMMON_INDEX_HDR_API_S_VER_1 */
829 	__le32 id_and_color;
830 	__le32 action;
831 	/* BINDING_DATA_API_S_VER_1 */
832 	__le32 macs[MAX_MACS_IN_BINDING];
833 	__le32 phy;
834 } __packed; /* BINDING_CMD_API_S_VER_1 */
835 
836 /* The maximal number of fragments in the FW's schedule session */
837 #define IWL_MVM_MAX_QUOTA 128
838 
839 /**
840  * struct iwl_time_quota_data - configuration of time quota per binding
841  * @id_and_color: ID and color of the relevant Binding
842  * @quota: absolute time quota in TU. The scheduler will try to divide the
843  *	remainig quota (after Time Events) according to this quota.
844  * @max_duration: max uninterrupted context duration in TU
845  */
846 struct iwl_time_quota_data {
847 	__le32 id_and_color;
848 	__le32 quota;
849 	__le32 max_duration;
850 } __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */
851 
852 /**
853  * struct iwl_time_quota_cmd - configuration of time quota between bindings
854  * ( TIME_QUOTA_CMD = 0x2c )
855  * @quotas: allocations per binding
856  */
857 struct iwl_time_quota_cmd {
858 	struct iwl_time_quota_data quotas[MAX_BINDINGS];
859 } __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */
860 
861 
862 /* PHY context */
863 
864 /* Supported bands */
865 #define PHY_BAND_5  (0)
866 #define PHY_BAND_24 (1)
867 
868 /* Supported channel width, vary if there is VHT support */
869 #define PHY_VHT_CHANNEL_MODE20	(0x0)
870 #define PHY_VHT_CHANNEL_MODE40	(0x1)
871 #define PHY_VHT_CHANNEL_MODE80	(0x2)
872 #define PHY_VHT_CHANNEL_MODE160	(0x3)
873 
874 /*
875  * Control channel position:
876  * For legacy set bit means upper channel, otherwise lower.
877  * For VHT - bit-2 marks if the control is lower/upper relative to center-freq
878  *   bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
879  *                                   center_freq
880  *                                        |
881  * 40Mhz                          |_______|_______|
882  * 80Mhz                  |_______|_______|_______|_______|
883  * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
884  * code      011     010     001     000  |  100     101     110    111
885  */
886 #define PHY_VHT_CTRL_POS_1_BELOW  (0x0)
887 #define PHY_VHT_CTRL_POS_2_BELOW  (0x1)
888 #define PHY_VHT_CTRL_POS_3_BELOW  (0x2)
889 #define PHY_VHT_CTRL_POS_4_BELOW  (0x3)
890 #define PHY_VHT_CTRL_POS_1_ABOVE  (0x4)
891 #define PHY_VHT_CTRL_POS_2_ABOVE  (0x5)
892 #define PHY_VHT_CTRL_POS_3_ABOVE  (0x6)
893 #define PHY_VHT_CTRL_POS_4_ABOVE  (0x7)
894 
895 /*
896  * @band: PHY_BAND_*
897  * @channel: channel number
898  * @width: PHY_[VHT|LEGACY]_CHANNEL_*
899  * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
900  */
901 struct iwl_fw_channel_info {
902 	u8 band;
903 	u8 channel;
904 	u8 width;
905 	u8 ctrl_pos;
906 } __packed;
907 
908 #define PHY_RX_CHAIN_DRIVER_FORCE_POS	(0)
909 #define PHY_RX_CHAIN_DRIVER_FORCE_MSK \
910 	(0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS)
911 #define PHY_RX_CHAIN_VALID_POS		(1)
912 #define PHY_RX_CHAIN_VALID_MSK \
913 	(0x7 << PHY_RX_CHAIN_VALID_POS)
914 #define PHY_RX_CHAIN_FORCE_SEL_POS	(4)
915 #define PHY_RX_CHAIN_FORCE_SEL_MSK \
916 	(0x7 << PHY_RX_CHAIN_FORCE_SEL_POS)
917 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS	(7)
918 #define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
919 	(0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
920 #define PHY_RX_CHAIN_CNT_POS		(10)
921 #define PHY_RX_CHAIN_CNT_MSK \
922 	(0x3 << PHY_RX_CHAIN_CNT_POS)
923 #define PHY_RX_CHAIN_MIMO_CNT_POS	(12)
924 #define PHY_RX_CHAIN_MIMO_CNT_MSK \
925 	(0x3 << PHY_RX_CHAIN_MIMO_CNT_POS)
926 #define PHY_RX_CHAIN_MIMO_FORCE_POS	(14)
927 #define PHY_RX_CHAIN_MIMO_FORCE_MSK \
928 	(0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS)
929 
930 /* TODO: fix the value, make it depend on firmware at runtime? */
931 #define NUM_PHY_CTX	3
932 
933 /* TODO: complete missing documentation */
934 /**
935  * struct iwl_phy_context_cmd - config of the PHY context
936  * ( PHY_CONTEXT_CMD = 0x8 )
937  * @id_and_color: ID and color of the relevant Binding
938  * @action: action to perform, one of FW_CTXT_ACTION_*
939  * @apply_time: 0 means immediate apply and context switch.
940  *	other value means apply new params after X usecs
941  * @tx_param_color: ???
942  * @channel_info:
943  * @txchain_info: ???
944  * @rxchain_info: ???
945  * @acquisition_data: ???
946  * @dsp_cfg_flags: set to 0
947  */
948 struct iwl_phy_context_cmd {
949 	/* COMMON_INDEX_HDR_API_S_VER_1 */
950 	__le32 id_and_color;
951 	__le32 action;
952 	/* PHY_CONTEXT_DATA_API_S_VER_1 */
953 	__le32 apply_time;
954 	__le32 tx_param_color;
955 	struct iwl_fw_channel_info ci;
956 	__le32 txchain_info;
957 	__le32 rxchain_info;
958 	__le32 acquisition_data;
959 	__le32 dsp_cfg_flags;
960 } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
961 
962 /*
963  * Aux ROC command
964  *
965  * Command requests the firmware to create a time event for a certain duration
966  * and remain on the given channel. This is done by using the Aux framework in
967  * the FW.
968  * The command was first used for Hot Spot issues - but can be used regardless
969  * to Hot Spot.
970  *
971  * ( HOT_SPOT_CMD 0x53 )
972  *
973  * @id_and_color: ID and color of the MAC
974  * @action: action to perform, one of FW_CTXT_ACTION_*
975  * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
976  *	event_unique_id should be the id of the time event assigned by ucode.
977  *	Otherwise ignore the event_unique_id.
978  * @sta_id_and_color: station id and color, resumed during "Remain On Channel"
979  *	activity.
980  * @channel_info: channel info
981  * @node_addr: Our MAC Address
982  * @reserved: reserved for alignment
983  * @apply_time: GP2 value to start (should always be the current GP2 value)
984  * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
985  *	time by which start of the event is allowed to be postponed.
986  * @duration: event duration in TU To calculate event duration:
987  *	timeEventDuration = min(duration, remainingQuota)
988  */
989 struct iwl_hs20_roc_req {
990 	/* COMMON_INDEX_HDR_API_S_VER_1 hdr */
991 	__le32 id_and_color;
992 	__le32 action;
993 	__le32 event_unique_id;
994 	__le32 sta_id_and_color;
995 	struct iwl_fw_channel_info channel_info;
996 	u8 node_addr[ETH_ALEN];
997 	__le16 reserved;
998 	__le32 apply_time;
999 	__le32 apply_time_max_delay;
1000 	__le32 duration;
1001 } __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
1002 
1003 /*
1004  * values for AUX ROC result values
1005  */
1006 enum iwl_mvm_hot_spot {
1007 	HOT_SPOT_RSP_STATUS_OK,
1008 	HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
1009 	HOT_SPOT_MAX_NUM_OF_SESSIONS,
1010 };
1011 
1012 /*
1013  * Aux ROC command response
1014  *
1015  * In response to iwl_hs20_roc_req the FW sends this command to notify the
1016  * driver the uid of the timevent.
1017  *
1018  * ( HOT_SPOT_CMD 0x53 )
1019  *
1020  * @event_unique_id: Unique ID of time event assigned by ucode
1021  * @status: Return status 0 is success, all the rest used for specific errors
1022  */
1023 struct iwl_hs20_roc_res {
1024 	__le32 event_unique_id;
1025 	__le32 status;
1026 } __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
1027 
1028 #define IWL_RX_INFO_PHY_CNT 8
1029 #define IWL_RX_INFO_ENERGY_ANT_ABC_IDX 1
1030 #define IWL_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff
1031 #define IWL_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00
1032 #define IWL_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000
1033 #define IWL_RX_INFO_ENERGY_ANT_A_POS 0
1034 #define IWL_RX_INFO_ENERGY_ANT_B_POS 8
1035 #define IWL_RX_INFO_ENERGY_ANT_C_POS 16
1036 
1037 #define IWL_RX_INFO_AGC_IDX 1
1038 #define IWL_RX_INFO_RSSI_AB_IDX 2
1039 #define IWL_OFDM_AGC_A_MSK 0x0000007f
1040 #define IWL_OFDM_AGC_A_POS 0
1041 #define IWL_OFDM_AGC_B_MSK 0x00003f80
1042 #define IWL_OFDM_AGC_B_POS 7
1043 #define IWL_OFDM_AGC_CODE_MSK 0x3fe00000
1044 #define IWL_OFDM_AGC_CODE_POS 20
1045 #define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff
1046 #define IWL_OFDM_RSSI_A_POS 0
1047 #define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
1048 #define IWL_OFDM_RSSI_ALLBAND_A_POS 8
1049 #define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000
1050 #define IWL_OFDM_RSSI_B_POS 16
1051 #define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
1052 #define IWL_OFDM_RSSI_ALLBAND_B_POS 24
1053 
1054 /**
1055  * struct iwl_rx_phy_info - phy info
1056  * (REPLY_RX_PHY_CMD = 0xc0)
1057  * @non_cfg_phy_cnt: non configurable DSP phy data byte count
1058  * @cfg_phy_cnt: configurable DSP phy data byte count
1059  * @stat_id: configurable DSP phy data set ID
1060  * @reserved1:
1061  * @system_timestamp: GP2  at on air rise
1062  * @timestamp: TSF at on air rise
1063  * @beacon_time_stamp: beacon at on-air rise
1064  * @phy_flags: general phy flags: band, modulation, ...
1065  * @channel: channel number
1066  * @non_cfg_phy_buf: for various implementations of non_cfg_phy
1067  * @rate_n_flags: RATE_MCS_*
1068  * @byte_count: frame's byte-count
1069  * @frame_time: frame's time on the air, based on byte count and frame rate
1070  *	calculation
1071  * @mac_active_msk: what MACs were active when the frame was received
1072  *
1073  * Before each Rx, the device sends this data. It contains PHY information
1074  * about the reception of the packet.
1075  */
1076 struct iwl_rx_phy_info {
1077 	u8 non_cfg_phy_cnt;
1078 	u8 cfg_phy_cnt;
1079 	u8 stat_id;
1080 	u8 reserved1;
1081 	__le32 system_timestamp;
1082 	__le64 timestamp;
1083 	__le32 beacon_time_stamp;
1084 	__le16 phy_flags;
1085 	__le16 channel;
1086 	__le32 non_cfg_phy[IWL_RX_INFO_PHY_CNT];
1087 	__le32 rate_n_flags;
1088 	__le32 byte_count;
1089 	__le16 mac_active_msk;
1090 	__le16 frame_time;
1091 } __packed;
1092 
1093 struct iwl_rx_mpdu_res_start {
1094 	__le16 byte_count;
1095 	__le16 reserved;
1096 } __packed;
1097 
1098 /**
1099  * enum iwl_rx_phy_flags - to parse %iwl_rx_phy_info phy_flags
1100  * @RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band
1101  * @RX_RES_PHY_FLAGS_MOD_CCK:
1102  * @RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short
1103  * @RX_RES_PHY_FLAGS_NARROW_BAND:
1104  * @RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received
1105  * @RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU
1106  * @RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame
1107  * @RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble
1108  * @RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame
1109  */
1110 enum iwl_rx_phy_flags {
1111 	RX_RES_PHY_FLAGS_BAND_24	= BIT(0),
1112 	RX_RES_PHY_FLAGS_MOD_CCK	= BIT(1),
1113 	RX_RES_PHY_FLAGS_SHORT_PREAMBLE	= BIT(2),
1114 	RX_RES_PHY_FLAGS_NARROW_BAND	= BIT(3),
1115 	RX_RES_PHY_FLAGS_ANTENNA	= (0x7 << 4),
1116 	RX_RES_PHY_FLAGS_ANTENNA_POS	= 4,
1117 	RX_RES_PHY_FLAGS_AGG		= BIT(7),
1118 	RX_RES_PHY_FLAGS_OFDM_HT	= BIT(8),
1119 	RX_RES_PHY_FLAGS_OFDM_GF	= BIT(9),
1120 	RX_RES_PHY_FLAGS_OFDM_VHT	= BIT(10),
1121 };
1122 
1123 /**
1124  * enum iwl_mvm_rx_status - written by fw for each Rx packet
1125  * @RX_MPDU_RES_STATUS_CRC_OK: CRC is fine
1126  * @RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow
1127  * @RX_MPDU_RES_STATUS_SRC_STA_FOUND:
1128  * @RX_MPDU_RES_STATUS_KEY_VALID:
1129  * @RX_MPDU_RES_STATUS_KEY_PARAM_OK:
1130  * @RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed
1131  * @RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked
1132  *	in the driver.
1133  * @RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine
1134  * @RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR:  valid for alg = CCM_CMAC or
1135  *	alg = CCM only. Checks replay attack for 11w frames. Relevant only if
1136  *	%RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set.
1137  * @RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted
1138  * @RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP
1139  * @RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM
1140  * @RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP
1141  * @RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC
1142  * @RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted
1143  * @RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm
1144  * @RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted
1145  * @RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP:
1146  * @RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP:
1147  * @RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT:
1148  * @RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame
1149  * @RX_MPDU_RES_STATUS_HASH_INDEX_MSK:
1150  * @RX_MPDU_RES_STATUS_STA_ID_MSK:
1151  * @RX_MPDU_RES_STATUS_RRF_KILL:
1152  * @RX_MPDU_RES_STATUS_FILTERING_MSK:
1153  * @RX_MPDU_RES_STATUS2_FILTERING_MSK:
1154  */
1155 enum iwl_mvm_rx_status {
1156 	RX_MPDU_RES_STATUS_CRC_OK			= BIT(0),
1157 	RX_MPDU_RES_STATUS_OVERRUN_OK			= BIT(1),
1158 	RX_MPDU_RES_STATUS_SRC_STA_FOUND		= BIT(2),
1159 	RX_MPDU_RES_STATUS_KEY_VALID			= BIT(3),
1160 	RX_MPDU_RES_STATUS_KEY_PARAM_OK			= BIT(4),
1161 	RX_MPDU_RES_STATUS_ICV_OK			= BIT(5),
1162 	RX_MPDU_RES_STATUS_MIC_OK			= BIT(6),
1163 	RX_MPDU_RES_STATUS_TTAK_OK			= BIT(7),
1164 	RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR		= BIT(7),
1165 	RX_MPDU_RES_STATUS_SEC_NO_ENC			= (0 << 8),
1166 	RX_MPDU_RES_STATUS_SEC_WEP_ENC			= (1 << 8),
1167 	RX_MPDU_RES_STATUS_SEC_CCM_ENC			= (2 << 8),
1168 	RX_MPDU_RES_STATUS_SEC_TKIP_ENC			= (3 << 8),
1169 	RX_MPDU_RES_STATUS_SEC_EXT_ENC			= (4 << 8),
1170 	RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC		= (6 << 8),
1171 	RX_MPDU_RES_STATUS_SEC_ENC_ERR			= (7 << 8),
1172 	RX_MPDU_RES_STATUS_SEC_ENC_MSK			= (7 << 8),
1173 	RX_MPDU_RES_STATUS_DEC_DONE			= BIT(11),
1174 	RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP	= BIT(12),
1175 	RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP		= BIT(13),
1176 	RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT		= BIT(14),
1177 	RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME		= BIT(15),
1178 	RX_MPDU_RES_STATUS_HASH_INDEX_MSK		= (0x3F0000),
1179 	RX_MPDU_RES_STATUS_STA_ID_MSK			= (0x1f000000),
1180 	RX_MPDU_RES_STATUS_RRF_KILL			= BIT(29),
1181 	RX_MPDU_RES_STATUS_FILTERING_MSK		= (0xc00000),
1182 	RX_MPDU_RES_STATUS2_FILTERING_MSK		= (0xc0000000),
1183 };
1184 
1185 /**
1186  * struct iwl_radio_version_notif - information on the radio version
1187  * ( RADIO_VERSION_NOTIFICATION = 0x68 )
1188  * @radio_flavor:
1189  * @radio_step:
1190  * @radio_dash:
1191  */
1192 struct iwl_radio_version_notif {
1193 	__le32 radio_flavor;
1194 	__le32 radio_step;
1195 	__le32 radio_dash;
1196 } __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */
1197 
1198 enum iwl_card_state_flags {
1199 	CARD_ENABLED		= 0x00,
1200 	HW_CARD_DISABLED	= 0x01,
1201 	SW_CARD_DISABLED	= 0x02,
1202 	CT_KILL_CARD_DISABLED	= 0x04,
1203 	HALT_CARD_DISABLED	= 0x08,
1204 	CARD_DISABLED_MSK	= 0x0f,
1205 	CARD_IS_RX_ON		= 0x10,
1206 };
1207 
1208 /**
1209  * struct iwl_radio_version_notif - information on the radio version
1210  * ( CARD_STATE_NOTIFICATION = 0xa1 )
1211  * @flags: %iwl_card_state_flags
1212  */
1213 struct iwl_card_state_notif {
1214 	__le32 flags;
1215 } __packed; /* CARD_STATE_NTFY_API_S_VER_1 */
1216 
1217 /**
1218  * struct iwl_missed_beacons_notif - information on missed beacons
1219  * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
1220  * @mac_id: interface ID
1221  * @consec_missed_beacons_since_last_rx: number of consecutive missed
1222  *	beacons since last RX.
1223  * @consec_missed_beacons: number of consecutive missed beacons
1224  * @num_expected_beacons:
1225  * @num_recvd_beacons:
1226  */
1227 struct iwl_missed_beacons_notif {
1228 	__le32 mac_id;
1229 	__le32 consec_missed_beacons_since_last_rx;
1230 	__le32 consec_missed_beacons;
1231 	__le32 num_expected_beacons;
1232 	__le32 num_recvd_beacons;
1233 } __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */
1234 
1235 /**
1236  * struct iwl_mfuart_load_notif - mfuart image version & status
1237  * ( MFUART_LOAD_NOTIFICATION = 0xb1 )
1238  * @installed_ver: installed image version
1239  * @external_ver: external image version
1240  * @status: MFUART loading status
1241  * @duration: MFUART loading time
1242 */
1243 struct iwl_mfuart_load_notif {
1244 	__le32 installed_ver;
1245 	__le32 external_ver;
1246 	__le32 status;
1247 	__le32 duration;
1248 } __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/
1249 
1250 /**
1251  * struct iwl_set_calib_default_cmd - set default value for calibration.
1252  * ( SET_CALIB_DEFAULT_CMD = 0x8e )
1253  * @calib_index: the calibration to set value for
1254  * @length: of data
1255  * @data: the value to set for the calibration result
1256  */
1257 struct iwl_set_calib_default_cmd {
1258 	__le16 calib_index;
1259 	__le16 length;
1260 	u8 data[0];
1261 } __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */
1262 
1263 #define MAX_PORT_ID_NUM	2
1264 #define MAX_MCAST_FILTERING_ADDRESSES 256
1265 
1266 /**
1267  * struct iwl_mcast_filter_cmd - configure multicast filter.
1268  * @filter_own: Set 1 to filter out multicast packets sent by station itself
1269  * @port_id:	Multicast MAC addresses array specifier. This is a strange way
1270  *		to identify network interface adopted in host-device IF.
1271  *		It is used by FW as index in array of addresses. This array has
1272  *		MAX_PORT_ID_NUM members.
1273  * @count:	Number of MAC addresses in the array
1274  * @pass_all:	Set 1 to pass all multicast packets.
1275  * @bssid:	current association BSSID.
1276  * @addr_list:	Place holder for array of MAC addresses.
1277  *		IMPORTANT: add padding if necessary to ensure DWORD alignment.
1278  */
1279 struct iwl_mcast_filter_cmd {
1280 	u8 filter_own;
1281 	u8 port_id;
1282 	u8 count;
1283 	u8 pass_all;
1284 	u8 bssid[6];
1285 	u8 reserved[2];
1286 	u8 addr_list[0];
1287 } __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */
1288 
1289 #define MAX_BCAST_FILTERS 8
1290 #define MAX_BCAST_FILTER_ATTRS 2
1291 
1292 /**
1293  * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet
1294  * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start.
1295  * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e.
1296  *	start of ip payload).
1297  */
1298 enum iwl_mvm_bcast_filter_attr_offset {
1299 	BCAST_FILTER_OFFSET_PAYLOAD_START = 0,
1300 	BCAST_FILTER_OFFSET_IP_END = 1,
1301 };
1302 
1303 /**
1304  * struct iwl_fw_bcast_filter_attr - broadcast filter attribute
1305  * @offset_type:	&enum iwl_mvm_bcast_filter_attr_offset.
1306  * @offset:	starting offset of this pattern.
1307  * @val:		value to match - big endian (MSB is the first
1308  *		byte to match from offset pos).
1309  * @mask:	mask to match (big endian).
1310  */
1311 struct iwl_fw_bcast_filter_attr {
1312 	u8 offset_type;
1313 	u8 offset;
1314 	__le16 reserved1;
1315 	__be32 val;
1316 	__be32 mask;
1317 } __packed; /* BCAST_FILTER_ATT_S_VER_1 */
1318 
1319 /**
1320  * enum iwl_mvm_bcast_filter_frame_type - filter frame type
1321  * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames.
1322  * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames
1323  */
1324 enum iwl_mvm_bcast_filter_frame_type {
1325 	BCAST_FILTER_FRAME_TYPE_ALL = 0,
1326 	BCAST_FILTER_FRAME_TYPE_IPV4 = 1,
1327 };
1328 
1329 /**
1330  * struct iwl_fw_bcast_filter - broadcast filter
1331  * @discard: discard frame (1) or let it pass (0).
1332  * @frame_type: &enum iwl_mvm_bcast_filter_frame_type.
1333  * @num_attrs: number of valid attributes in this filter.
1334  * @attrs: attributes of this filter. a filter is considered matched
1335  *	only when all its attributes are matched (i.e. AND relationship)
1336  */
1337 struct iwl_fw_bcast_filter {
1338 	u8 discard;
1339 	u8 frame_type;
1340 	u8 num_attrs;
1341 	u8 reserved1;
1342 	struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS];
1343 } __packed; /* BCAST_FILTER_S_VER_1 */
1344 
1345 /**
1346  * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration.
1347  * @default_discard: default action for this mac (discard (1) / pass (0)).
1348  * @attached_filters: bitmap of relevant filters for this mac.
1349  */
1350 struct iwl_fw_bcast_mac {
1351 	u8 default_discard;
1352 	u8 reserved1;
1353 	__le16 attached_filters;
1354 } __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */
1355 
1356 /**
1357  * struct iwl_bcast_filter_cmd - broadcast filtering configuration
1358  * @disable: enable (0) / disable (1)
1359  * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS)
1360  * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER)
1361  * @filters: broadcast filters
1362  * @macs: broadcast filtering configuration per-mac
1363  */
1364 struct iwl_bcast_filter_cmd {
1365 	u8 disable;
1366 	u8 max_bcast_filters;
1367 	u8 max_macs;
1368 	u8 reserved1;
1369 	struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS];
1370 	struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER];
1371 } __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */
1372 
1373 /*
1374  * enum iwl_mvm_marker_id - maker ids
1375  *
1376  * The ids for different type of markers to insert into the usniffer logs
1377  */
1378 enum iwl_mvm_marker_id {
1379 	MARKER_ID_TX_FRAME_LATENCY = 1,
1380 }; /* MARKER_ID_API_E_VER_1 */
1381 
1382 /**
1383  * struct iwl_mvm_marker - mark info into the usniffer logs
1384  *
1385  * (MARKER_CMD = 0xcb)
1386  *
1387  * Mark the UTC time stamp into the usniffer logs together with additional
1388  * metadata, so the usniffer output can be parsed.
1389  * In the command response the ucode will return the GP2 time.
1390  *
1391  * @dw_len: The amount of dwords following this byte including this byte.
1392  * @marker_id: A unique marker id (iwl_mvm_marker_id).
1393  * @reserved: reserved.
1394  * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC
1395  * @metadata: additional meta data that will be written to the unsiffer log
1396  */
1397 struct iwl_mvm_marker {
1398 	u8 dwLen;
1399 	u8 markerId;
1400 	__le16 reserved;
1401 	__le64 timestamp;
1402 	__le32 metadata[0];
1403 } __packed; /* MARKER_API_S_VER_1 */
1404 
1405 /***********************************
1406  * Smart Fifo API
1407  ***********************************/
1408 /* Smart Fifo state */
1409 enum iwl_sf_state {
1410 	SF_LONG_DELAY_ON = 0, /* should never be called by driver */
1411 	SF_FULL_ON,
1412 	SF_UNINIT,
1413 	SF_INIT_OFF,
1414 	SF_HW_NUM_STATES
1415 };
1416 
1417 /* Smart Fifo possible scenario */
1418 enum iwl_sf_scenario {
1419 	SF_SCENARIO_SINGLE_UNICAST,
1420 	SF_SCENARIO_AGG_UNICAST,
1421 	SF_SCENARIO_MULTICAST,
1422 	SF_SCENARIO_BA_RESP,
1423 	SF_SCENARIO_TX_RESP,
1424 	SF_NUM_SCENARIO
1425 };
1426 
1427 #define SF_TRANSIENT_STATES_NUMBER 2	/* SF_LONG_DELAY_ON and SF_FULL_ON */
1428 #define SF_NUM_TIMEOUT_TYPES 2		/* Aging timer and Idle timer */
1429 
1430 /* smart FIFO default values */
1431 #define SF_W_MARK_SISO 6144
1432 #define SF_W_MARK_MIMO2 8192
1433 #define SF_W_MARK_MIMO3 6144
1434 #define SF_W_MARK_LEGACY 4096
1435 #define SF_W_MARK_SCAN 4096
1436 
1437 /* SF Scenarios timers for default configuration (aligned to 32 uSec) */
1438 #define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160	/* 150 uSec  */
1439 #define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400	/* 0.4 mSec */
1440 #define SF_AGG_UNICAST_IDLE_TIMER_DEF 160		/* 150 uSec */
1441 #define SF_AGG_UNICAST_AGING_TIMER_DEF 400		/* 0.4 mSec */
1442 #define SF_MCAST_IDLE_TIMER_DEF 160		/* 150 mSec */
1443 #define SF_MCAST_AGING_TIMER_DEF 400		/* 0.4 mSec */
1444 #define SF_BA_IDLE_TIMER_DEF 160			/* 150 uSec */
1445 #define SF_BA_AGING_TIMER_DEF 400			/* 0.4 mSec */
1446 #define SF_TX_RE_IDLE_TIMER_DEF 160			/* 150 uSec */
1447 #define SF_TX_RE_AGING_TIMER_DEF 400		/* 0.4 mSec */
1448 
1449 /* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */
1450 #define SF_SINGLE_UNICAST_IDLE_TIMER 320	/* 300 uSec  */
1451 #define SF_SINGLE_UNICAST_AGING_TIMER 2016	/* 2 mSec */
1452 #define SF_AGG_UNICAST_IDLE_TIMER 320		/* 300 uSec */
1453 #define SF_AGG_UNICAST_AGING_TIMER 2016		/* 2 mSec */
1454 #define SF_MCAST_IDLE_TIMER 2016		/* 2 mSec */
1455 #define SF_MCAST_AGING_TIMER 10016		/* 10 mSec */
1456 #define SF_BA_IDLE_TIMER 320			/* 300 uSec */
1457 #define SF_BA_AGING_TIMER 2016			/* 2 mSec */
1458 #define SF_TX_RE_IDLE_TIMER 320			/* 300 uSec */
1459 #define SF_TX_RE_AGING_TIMER 2016		/* 2 mSec */
1460 
1461 #define SF_LONG_DELAY_AGING_TIMER 1000000	/* 1 Sec */
1462 
1463 #define SF_CFG_DUMMY_NOTIF_OFF	BIT(16)
1464 
1465 /**
1466  * Smart Fifo configuration command.
1467  * @state: smart fifo state, types listed in enum %iwl_sf_sate.
1468  * @watermark: Minimum allowed availabe free space in RXF for transient state.
1469  * @long_delay_timeouts: aging and idle timer values for each scenario
1470  * in long delay state.
1471  * @full_on_timeouts: timer values for each scenario in full on state.
1472  */
1473 struct iwl_sf_cfg_cmd {
1474 	__le32 state;
1475 	__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
1476 	__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
1477 	__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
1478 } __packed; /* SF_CFG_API_S_VER_2 */
1479 
1480 /***********************************
1481  * Location Aware Regulatory (LAR) API - MCC updates
1482  ***********************************/
1483 
1484 /**
1485  * struct iwl_mcc_update_cmd - Request the device to update geographic
1486  * regulatory profile according to the given MCC (Mobile Country Code).
1487  * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
1488  * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
1489  * MCC in the cmd response will be the relevant MCC in the NVM.
1490  * @mcc: given mobile country code
1491  * @source_id: the source from where we got the MCC, see iwl_mcc_source
1492  * @reserved: reserved for alignment
1493  */
1494 struct iwl_mcc_update_cmd {
1495 	__le16 mcc;
1496 	u8 source_id;
1497 	u8 reserved;
1498 } __packed; /* LAR_UPDATE_MCC_CMD_API_S */
1499 
1500 /**
1501  * iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
1502  * Contains the new channel control profile map, if changed, and the new MCC
1503  * (mobile country code).
1504  * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
1505  * @status: see &enum iwl_mcc_update_status
1506  * @mcc: the new applied MCC
1507  * @cap: capabilities for all channels which matches the MCC
1508  * @source_id: the MCC source, see iwl_mcc_source
1509  * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
1510  *		channels, depending on platform)
1511  * @channels: channel control data map, DWORD for each channel. Only the first
1512  *	16bits are used.
1513  */
1514 struct iwl_mcc_update_resp {
1515 	__le32 status;
1516 	__le16 mcc;
1517 	u8 cap;
1518 	u8 source_id;
1519 	__le32 n_channels;
1520 	__le32 channels[0];
1521 } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S */
1522 
1523 /**
1524  * struct iwl_mcc_chub_notif - chub notifies of mcc change
1525  * (MCC_CHUB_UPDATE_CMD = 0xc9)
1526  * The Chub (Communication Hub, CommsHUB) is a HW component that connects to
1527  * the cellular and connectivity cores that gets updates of the mcc, and
1528  * notifies the ucode directly of any mcc change.
1529  * The ucode requests the driver to request the device to update geographic
1530  * regulatory  profile according to the given MCC (Mobile Country Code).
1531  * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
1532  * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
1533  * MCC in the cmd response will be the relevant MCC in the NVM.
1534  * @mcc: given mobile country code
1535  * @source_id: identity of the change originator, see iwl_mcc_source
1536  * @reserved1: reserved for alignment
1537  */
1538 struct iwl_mcc_chub_notif {
1539 	u16 mcc;
1540 	u8 source_id;
1541 	u8 reserved1;
1542 } __packed; /* LAR_MCC_NOTIFY_S */
1543 
1544 enum iwl_mcc_update_status {
1545 	MCC_RESP_NEW_CHAN_PROFILE,
1546 	MCC_RESP_SAME_CHAN_PROFILE,
1547 	MCC_RESP_INVALID,
1548 	MCC_RESP_NVM_DISABLED,
1549 	MCC_RESP_ILLEGAL,
1550 	MCC_RESP_LOW_PRIORITY,
1551 };
1552 
1553 enum iwl_mcc_source {
1554 	MCC_SOURCE_OLD_FW = 0,
1555 	MCC_SOURCE_ME = 1,
1556 	MCC_SOURCE_BIOS = 2,
1557 	MCC_SOURCE_3G_LTE_HOST = 3,
1558 	MCC_SOURCE_3G_LTE_DEVICE = 4,
1559 	MCC_SOURCE_WIFI = 5,
1560 	MCC_SOURCE_RESERVED = 6,
1561 	MCC_SOURCE_DEFAULT = 7,
1562 	MCC_SOURCE_UNINITIALIZED = 8,
1563 	MCC_SOURCE_GET_CURRENT = 0x10
1564 };
1565 
1566 /* DTS measurements */
1567 
1568 enum iwl_dts_measurement_flags {
1569 	DTS_TRIGGER_CMD_FLAGS_TEMP	= BIT(0),
1570 	DTS_TRIGGER_CMD_FLAGS_VOLT	= BIT(1),
1571 };
1572 
1573 /**
1574  * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
1575  *
1576  * @flags: indicates which measurements we want as specified in &enum
1577  *	   iwl_dts_measurement_flags
1578  */
1579 struct iwl_dts_measurement_cmd {
1580 	__le32 flags;
1581 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
1582 
1583 /**
1584  * iwl_dts_measurement_notif - notification received with the measurements
1585  *
1586  * @temp: the measured temperature
1587  * @voltage: the measured voltage
1588  */
1589 struct iwl_dts_measurement_notif {
1590 	__le32 temp;
1591 	__le32 voltage;
1592 } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S */
1593 
1594 /***********************************
1595  * TDLS API
1596  ***********************************/
1597 
1598 /* Type of TDLS request */
1599 enum iwl_tdls_channel_switch_type {
1600 	TDLS_SEND_CHAN_SW_REQ = 0,
1601 	TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH,
1602 	TDLS_MOVE_CH,
1603 }; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */
1604 
1605 /**
1606  * Switch timing sub-element in a TDLS channel-switch command
1607  * @frame_timestamp: GP2 timestamp of channel-switch request/response packet
1608  *	received from peer
1609  * @max_offchan_duration: What amount of microseconds out of a DTIM is given
1610  *	to the TDLS off-channel communication. For instance if the DTIM is
1611  *	200TU and the TDLS peer is to be given 25% of the time, the value
1612  *	given will be 50TU, or 50 * 1024 if translated into microseconds.
1613  * @switch_time: switch time the peer sent in its channel switch timing IE
1614  * @switch_timout: switch timeout the peer sent in its channel switch timing IE
1615  */
1616 struct iwl_tdls_channel_switch_timing {
1617 	__le32 frame_timestamp; /* GP2 time of peer packet Rx */
1618 	__le32 max_offchan_duration; /* given in micro-seconds */
1619 	__le32 switch_time; /* given in micro-seconds */
1620 	__le32 switch_timeout; /* given in micro-seconds */
1621 } __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */
1622 
1623 #define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200
1624 
1625 /**
1626  * TDLS channel switch frame template
1627  *
1628  * A template representing a TDLS channel-switch request or response frame
1629  *
1630  * @switch_time_offset: offset to the channel switch timing IE in the template
1631  * @tx_cmd: Tx parameters for the frame
1632  * @data: frame data
1633  */
1634 struct iwl_tdls_channel_switch_frame {
1635 	__le32 switch_time_offset;
1636 	struct iwl_tx_cmd tx_cmd;
1637 	u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE];
1638 } __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */
1639 
1640 /**
1641  * TDLS channel switch command
1642  *
1643  * The command is sent to initiate a channel switch and also in response to
1644  * incoming TDLS channel-switch request/response packets from remote peers.
1645  *
1646  * @switch_type: see &enum iwl_tdls_channel_switch_type
1647  * @peer_sta_id: station id of TDLS peer
1648  * @ci: channel we switch to
1649  * @timing: timing related data for command
1650  * @frame: channel-switch request/response template, depending to switch_type
1651  */
1652 struct iwl_tdls_channel_switch_cmd {
1653 	u8 switch_type;
1654 	__le32 peer_sta_id;
1655 	struct iwl_fw_channel_info ci;
1656 	struct iwl_tdls_channel_switch_timing timing;
1657 	struct iwl_tdls_channel_switch_frame frame;
1658 } __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */
1659 
1660 /**
1661  * TDLS channel switch start notification
1662  *
1663  * @status: non-zero on success
1664  * @offchannel_duration: duration given in microseconds
1665  * @sta_id: peer currently performing the channel-switch with
1666  */
1667 struct iwl_tdls_channel_switch_notif {
1668 	__le32 status;
1669 	__le32 offchannel_duration;
1670 	__le32 sta_id;
1671 } __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */
1672 
1673 /**
1674  * TDLS station info
1675  *
1676  * @sta_id: station id of the TDLS peer
1677  * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx
1678  * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer
1679  * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise
1680  */
1681 struct iwl_tdls_sta_info {
1682 	u8 sta_id;
1683 	u8 tx_to_peer_tid;
1684 	__le16 tx_to_peer_ssn;
1685 	__le32 is_initiator;
1686 } __packed; /* TDLS_STA_INFO_VER_1 */
1687 
1688 /**
1689  * TDLS basic config command
1690  *
1691  * @id_and_color: MAC id and color being configured
1692  * @tdls_peer_count: amount of currently connected TDLS peers
1693  * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx
1694  * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP
1695  * @sta_info: per-station info. Only the first tdls_peer_count entries are set
1696  * @pti_req_data_offset: offset of network-level data for the PTI template
1697  * @pti_req_tx_cmd: Tx parameters for PTI request template
1698  * @pti_req_template: PTI request template data
1699  */
1700 struct iwl_tdls_config_cmd {
1701 	__le32 id_and_color; /* mac id and color */
1702 	u8 tdls_peer_count;
1703 	u8 tx_to_ap_tid;
1704 	__le16 tx_to_ap_ssn;
1705 	struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT];
1706 
1707 	__le32 pti_req_data_offset;
1708 	struct iwl_tx_cmd pti_req_tx_cmd;
1709 	u8 pti_req_template[0];
1710 } __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */
1711 
1712 /**
1713  * TDLS per-station config information from FW
1714  *
1715  * @sta_id: station id of the TDLS peer
1716  * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to
1717  *	the peer
1718  */
1719 struct iwl_tdls_config_sta_info_res {
1720 	__le16 sta_id;
1721 	__le16 tx_to_peer_last_seq;
1722 } __packed; /* TDLS_STA_INFO_RSP_VER_1 */
1723 
1724 /**
1725  * TDLS config information from FW
1726  *
1727  * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP
1728  * @sta_info: per-station TDLS config information
1729  */
1730 struct iwl_tdls_config_res {
1731 	__le32 tx_to_ap_last_seq;
1732 	struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT];
1733 } __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */
1734 
1735 #define TX_FIFO_MAX_NUM		8
1736 #define RX_FIFO_MAX_NUM		2
1737 
1738 /**
1739  * Shared memory configuration information from the FW
1740  *
1741  * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not
1742  *	accessible)
1743  * @shared_mem_size: shared memory size
1744  * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to
1745  *	0x0 as accessible only via DBGM RDAT)
1746  * @sample_buff_size: internal sample buff size
1747  * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre
1748  *	8000 HW set to 0x0 as not accessible)
1749  * @txfifo_size: size of TXF0 ... TXF7
1750  * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0
1751  * @page_buff_addr: used by UMAC and performance debug (page miss analysis),
1752  *	when paging is not supported this should be 0
1753  * @page_buff_size: size of %page_buff_addr
1754  */
1755 struct iwl_shared_mem_cfg {
1756 	__le32 shared_mem_addr;
1757 	__le32 shared_mem_size;
1758 	__le32 sample_buff_addr;
1759 	__le32 sample_buff_size;
1760 	__le32 txfifo_addr;
1761 	__le32 txfifo_size[TX_FIFO_MAX_NUM];
1762 	__le32 rxfifo_size[RX_FIFO_MAX_NUM];
1763 	__le32 page_buff_addr;
1764 	__le32 page_buff_size;
1765 } __packed; /* SHARED_MEM_ALLOC_API_S_VER_1 */
1766 
1767 #endif /* __fw_api_h__ */
1768