1 /*
2 * Copyright (c) 2015 MediaTek Inc.
3 * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
4 *
5 * This software is licensed under the terms of the GNU General Public
6 * License version 2, as published by the Free Software Foundation, and
7 * may be copied, distributed, and modified under those terms.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 */
15
16 #include <dt-bindings/phy/phy.h>
17 #include <linux/clk.h>
18 #include <linux/delay.h>
19 #include <linux/io.h>
20 #include <linux/module.h>
21 #include <linux/of_address.h>
22 #include <linux/phy/phy.h>
23 #include <linux/platform_device.h>
24
25 /*
26 * for sifslv2 register, but exclude port's;
27 * relative to USB3_SIF2_BASE base address
28 */
29 #define SSUSB_SIFSLV_SPLLC 0x0000
30
31 /* offsets of sub-segment in each port registers */
32 #define SSUSB_SIFSLV_U2PHY_COM_BASE 0x0000
33 #define SSUSB_SIFSLV_U3PHYD_BASE 0x0100
34 #define SSUSB_USB30_PHYA_SIV_B_BASE 0x0300
35 #define SSUSB_SIFSLV_U3PHYA_DA_BASE 0x0400
36
37 #define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000)
38 #define PA0_RG_U2PLL_FORCE_ON BIT(15)
39
40 #define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008)
41 #define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
42
43 #define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014)
44 #define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
45 #define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
46 #define PA5_RG_U2_HS_100U_U3_EN BIT(11)
47
48 #define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018)
49 #define PA6_RG_U2_ISO_EN BIT(31)
50 #define PA6_RG_U2_BC11_SW_EN BIT(23)
51 #define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
52
53 #define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020)
54 #define P2C_RG_USB20_GPIO_CTL BIT(9)
55 #define P2C_USB20_GPIO_MODE BIT(8)
56 #define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
57
58 #define U3D_U2PHYDCR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060)
59 #define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
60
61 #define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068)
62 #define P2C_FORCE_UART_EN BIT(26)
63 #define P2C_FORCE_DATAIN BIT(23)
64 #define P2C_FORCE_DM_PULLDOWN BIT(21)
65 #define P2C_FORCE_DP_PULLDOWN BIT(20)
66 #define P2C_FORCE_XCVRSEL BIT(19)
67 #define P2C_FORCE_SUSPENDM BIT(18)
68 #define P2C_FORCE_TERMSEL BIT(17)
69 #define P2C_RG_DATAIN GENMASK(13, 10)
70 #define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
71 #define P2C_RG_DMPULLDOWN BIT(7)
72 #define P2C_RG_DPPULLDOWN BIT(6)
73 #define P2C_RG_XCVRSEL GENMASK(5, 4)
74 #define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
75 #define P2C_RG_SUSPENDM BIT(3)
76 #define P2C_RG_TERMSEL BIT(2)
77 #define P2C_DTM0_PART_MASK \
78 (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
79 P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
80 P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
81 P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
82
83 #define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C)
84 #define P2C_RG_UART_EN BIT(16)
85 #define P2C_RG_VBUSVALID BIT(5)
86 #define P2C_RG_SESSEND BIT(4)
87 #define P2C_RG_AVALID BIT(2)
88
89 #define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000)
90 #define P3A_RG_U3_VUSB10_ON BIT(5)
91
92 #define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018)
93 #define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
94 #define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
95
96 #define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024)
97 #define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
98 #define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
99
100 #define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0000)
101 #define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
102 #define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
103
104 #define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x005c)
105 #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
106 #define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
107 #define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
108 #define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
109
110 #define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x0018)
111 #define XC3_RG_U3_XTAL_RX_PWD BIT(9)
112 #define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
113
114 struct mt65xx_phy_instance {
115 struct phy *phy;
116 void __iomem *port_base;
117 u32 index;
118 u8 type;
119 };
120
121 struct mt65xx_u3phy {
122 struct device *dev;
123 void __iomem *sif_base; /* include sif2, but exclude port's */
124 struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
125 struct mt65xx_phy_instance **phys;
126 int nphys;
127 };
128
phy_instance_init(struct mt65xx_u3phy * u3phy,struct mt65xx_phy_instance * instance)129 static void phy_instance_init(struct mt65xx_u3phy *u3phy,
130 struct mt65xx_phy_instance *instance)
131 {
132 void __iomem *port_base = instance->port_base;
133 u32 index = instance->index;
134 u32 tmp;
135
136 /* switch to USB function. (system register, force ip into usb mode) */
137 tmp = readl(port_base + U3P_U2PHYDTM0);
138 tmp &= ~P2C_FORCE_UART_EN;
139 tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
140 writel(tmp, port_base + U3P_U2PHYDTM0);
141
142 tmp = readl(port_base + U3P_U2PHYDTM1);
143 tmp &= ~P2C_RG_UART_EN;
144 writel(tmp, port_base + U3P_U2PHYDTM1);
145
146 if (!index) {
147 tmp = readl(port_base + U3P_U2PHYACR4);
148 tmp &= ~P2C_U2_GPIO_CTR_MSK;
149 writel(tmp, port_base + U3P_U2PHYACR4);
150
151 tmp = readl(port_base + U3P_USBPHYACR2);
152 tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
153 writel(tmp, port_base + U3P_USBPHYACR2);
154
155 tmp = readl(port_base + U3D_U2PHYDCR0);
156 tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
157 writel(tmp, port_base + U3D_U2PHYDCR0);
158 } else {
159 tmp = readl(port_base + U3D_U2PHYDCR0);
160 tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
161 writel(tmp, port_base + U3D_U2PHYDCR0);
162
163 tmp = readl(port_base + U3P_U2PHYDTM0);
164 tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
165 writel(tmp, port_base + U3P_U2PHYDTM0);
166 }
167
168 /* DP/DM BC1.1 path Disable */
169 tmp = readl(port_base + U3P_USBPHYACR6);
170 tmp &= ~PA6_RG_U2_BC11_SW_EN;
171 writel(tmp, port_base + U3P_USBPHYACR6);
172
173 tmp = readl(port_base + U3P_U3PHYA_DA_REG0);
174 tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
175 tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
176 writel(tmp, port_base + U3P_U3PHYA_DA_REG0);
177
178 tmp = readl(port_base + U3P_U3_PHYA_REG9);
179 tmp &= ~P3A_RG_RX_DAC_MUX;
180 tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
181 writel(tmp, port_base + U3P_U3_PHYA_REG9);
182
183 tmp = readl(port_base + U3P_U3_PHYA_REG6);
184 tmp &= ~P3A_RG_TX_EIDLE_CM;
185 tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
186 writel(tmp, port_base + U3P_U3_PHYA_REG6);
187
188 tmp = readl(port_base + U3P_PHYD_CDR1);
189 tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
190 tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
191 writel(tmp, port_base + U3P_PHYD_CDR1);
192
193 dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
194 }
195
phy_instance_power_on(struct mt65xx_u3phy * u3phy,struct mt65xx_phy_instance * instance)196 static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
197 struct mt65xx_phy_instance *instance)
198 {
199 void __iomem *port_base = instance->port_base;
200 u32 index = instance->index;
201 u32 tmp;
202
203 if (!index) {
204 /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */
205 tmp = readl(port_base + U3P_U3_PHYA_REG0);
206 tmp |= P3A_RG_U3_VUSB10_ON;
207 writel(tmp, port_base + U3P_U3_PHYA_REG0);
208 }
209
210 /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
211 tmp = readl(port_base + U3P_U2PHYDTM0);
212 tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
213 tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
214 writel(tmp, port_base + U3P_U2PHYDTM0);
215
216 /* OTG Enable */
217 tmp = readl(port_base + U3P_USBPHYACR6);
218 tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
219 writel(tmp, port_base + U3P_USBPHYACR6);
220
221 if (!index) {
222 tmp = readl(u3phy->sif_base + U3P_XTALCTL3);
223 tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
224 writel(tmp, u3phy->sif_base + U3P_XTALCTL3);
225
226 /* [mt8173]disable Change 100uA current from SSUSB */
227 tmp = readl(port_base + U3P_USBPHYACR5);
228 tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
229 writel(tmp, port_base + U3P_USBPHYACR5);
230 }
231
232 tmp = readl(port_base + U3P_U2PHYDTM1);
233 tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
234 tmp &= ~P2C_RG_SESSEND;
235 writel(tmp, port_base + U3P_U2PHYDTM1);
236
237 /* USB 2.0 slew rate calibration */
238 tmp = readl(port_base + U3P_USBPHYACR5);
239 tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
240 tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
241 writel(tmp, port_base + U3P_USBPHYACR5);
242
243 if (index) {
244 tmp = readl(port_base + U3D_U2PHYDCR0);
245 tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
246 writel(tmp, port_base + U3D_U2PHYDCR0);
247
248 tmp = readl(port_base + U3P_U2PHYDTM0);
249 tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
250 writel(tmp, port_base + U3P_U2PHYDTM0);
251 }
252 dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
253 }
254
phy_instance_power_off(struct mt65xx_u3phy * u3phy,struct mt65xx_phy_instance * instance)255 static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
256 struct mt65xx_phy_instance *instance)
257 {
258 void __iomem *port_base = instance->port_base;
259 u32 index = instance->index;
260 u32 tmp;
261
262 tmp = readl(port_base + U3P_U2PHYDTM0);
263 tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
264 tmp |= P2C_FORCE_SUSPENDM;
265 writel(tmp, port_base + U3P_U2PHYDTM0);
266
267 /* OTG Disable */
268 tmp = readl(port_base + U3P_USBPHYACR6);
269 tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
270 writel(tmp, port_base + U3P_USBPHYACR6);
271
272 if (!index) {
273 /* (also disable)Change 100uA current switch to USB2.0 */
274 tmp = readl(port_base + U3P_USBPHYACR5);
275 tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
276 writel(tmp, port_base + U3P_USBPHYACR5);
277 }
278
279 /* let suspendm=0, set utmi into analog power down */
280 tmp = readl(port_base + U3P_U2PHYDTM0);
281 tmp &= ~P2C_RG_SUSPENDM;
282 writel(tmp, port_base + U3P_U2PHYDTM0);
283 udelay(1);
284
285 tmp = readl(port_base + U3P_U2PHYDTM1);
286 tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
287 tmp |= P2C_RG_SESSEND;
288 writel(tmp, port_base + U3P_U2PHYDTM1);
289
290 if (!index) {
291 tmp = readl(port_base + U3P_U3_PHYA_REG0);
292 tmp &= ~P3A_RG_U3_VUSB10_ON;
293 writel(tmp, port_base + U3P_U3_PHYA_REG0);
294 } else {
295 tmp = readl(port_base + U3D_U2PHYDCR0);
296 tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
297 writel(tmp, port_base + U3D_U2PHYDCR0);
298 }
299
300 dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
301 }
302
phy_instance_exit(struct mt65xx_u3phy * u3phy,struct mt65xx_phy_instance * instance)303 static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
304 struct mt65xx_phy_instance *instance)
305 {
306 void __iomem *port_base = instance->port_base;
307 u32 index = instance->index;
308 u32 tmp;
309
310 if (index) {
311 tmp = readl(port_base + U3D_U2PHYDCR0);
312 tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
313 writel(tmp, port_base + U3D_U2PHYDCR0);
314
315 tmp = readl(port_base + U3P_U2PHYDTM0);
316 tmp &= ~P2C_FORCE_SUSPENDM;
317 writel(tmp, port_base + U3P_U2PHYDTM0);
318 }
319 }
320
mt65xx_phy_init(struct phy * phy)321 static int mt65xx_phy_init(struct phy *phy)
322 {
323 struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
324 struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
325 int ret;
326
327 ret = clk_prepare_enable(u3phy->u3phya_ref);
328 if (ret) {
329 dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
330 return ret;
331 }
332
333 phy_instance_init(u3phy, instance);
334 return 0;
335 }
336
mt65xx_phy_power_on(struct phy * phy)337 static int mt65xx_phy_power_on(struct phy *phy)
338 {
339 struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
340 struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
341
342 phy_instance_power_on(u3phy, instance);
343 return 0;
344 }
345
mt65xx_phy_power_off(struct phy * phy)346 static int mt65xx_phy_power_off(struct phy *phy)
347 {
348 struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
349 struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
350
351 phy_instance_power_off(u3phy, instance);
352 return 0;
353 }
354
mt65xx_phy_exit(struct phy * phy)355 static int mt65xx_phy_exit(struct phy *phy)
356 {
357 struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
358 struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
359
360 phy_instance_exit(u3phy, instance);
361 clk_disable_unprepare(u3phy->u3phya_ref);
362 return 0;
363 }
364
mt65xx_phy_xlate(struct device * dev,struct of_phandle_args * args)365 static struct phy *mt65xx_phy_xlate(struct device *dev,
366 struct of_phandle_args *args)
367 {
368 struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
369 struct mt65xx_phy_instance *instance = NULL;
370 struct device_node *phy_np = args->np;
371 int index;
372
373
374 if (args->args_count != 1) {
375 dev_err(dev, "invalid number of cells in 'phy' property\n");
376 return ERR_PTR(-EINVAL);
377 }
378
379 for (index = 0; index < u3phy->nphys; index++)
380 if (phy_np == u3phy->phys[index]->phy->dev.of_node) {
381 instance = u3phy->phys[index];
382 break;
383 }
384
385 if (!instance) {
386 dev_err(dev, "failed to find appropriate phy\n");
387 return ERR_PTR(-EINVAL);
388 }
389
390 instance->type = args->args[0];
391
392 if (!(instance->type == PHY_TYPE_USB2 ||
393 instance->type == PHY_TYPE_USB3)) {
394 dev_err(dev, "unsupported device type: %d\n", instance->type);
395 return ERR_PTR(-EINVAL);
396 }
397
398 return instance->phy;
399 }
400
401 static struct phy_ops mt65xx_u3phy_ops = {
402 .init = mt65xx_phy_init,
403 .exit = mt65xx_phy_exit,
404 .power_on = mt65xx_phy_power_on,
405 .power_off = mt65xx_phy_power_off,
406 .owner = THIS_MODULE,
407 };
408
mt65xx_u3phy_probe(struct platform_device * pdev)409 static int mt65xx_u3phy_probe(struct platform_device *pdev)
410 {
411 struct device *dev = &pdev->dev;
412 struct device_node *np = dev->of_node;
413 struct device_node *child_np;
414 struct phy_provider *provider;
415 struct resource *sif_res;
416 struct mt65xx_u3phy *u3phy;
417 struct resource res;
418 int port, retval;
419
420 u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
421 if (!u3phy)
422 return -ENOMEM;
423
424 u3phy->nphys = of_get_child_count(np);
425 u3phy->phys = devm_kcalloc(dev, u3phy->nphys,
426 sizeof(*u3phy->phys), GFP_KERNEL);
427 if (!u3phy->phys)
428 return -ENOMEM;
429
430 u3phy->dev = dev;
431 platform_set_drvdata(pdev, u3phy);
432
433 sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
434 u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
435 if (IS_ERR(u3phy->sif_base)) {
436 dev_err(dev, "failed to remap sif regs\n");
437 return PTR_ERR(u3phy->sif_base);
438 }
439
440 u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
441 if (IS_ERR(u3phy->u3phya_ref)) {
442 dev_err(dev, "error to get u3phya_ref\n");
443 return PTR_ERR(u3phy->u3phya_ref);
444 }
445
446 port = 0;
447 for_each_child_of_node(np, child_np) {
448 struct mt65xx_phy_instance *instance;
449 struct phy *phy;
450
451 instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
452 if (!instance) {
453 retval = -ENOMEM;
454 goto put_child;
455 }
456
457 u3phy->phys[port] = instance;
458
459 phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops);
460 if (IS_ERR(phy)) {
461 dev_err(dev, "failed to create phy\n");
462 retval = PTR_ERR(phy);
463 goto put_child;
464 }
465
466 retval = of_address_to_resource(child_np, 0, &res);
467 if (retval) {
468 dev_err(dev, "failed to get address resource(id-%d)\n",
469 port);
470 goto put_child;
471 }
472
473 instance->port_base = devm_ioremap_resource(&phy->dev, &res);
474 if (IS_ERR(instance->port_base)) {
475 dev_err(dev, "failed to remap phy regs\n");
476 retval = PTR_ERR(instance->port_base);
477 goto put_child;
478 }
479
480 instance->phy = phy;
481 instance->index = port;
482 phy_set_drvdata(phy, instance);
483 port++;
484 }
485
486 provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
487
488 return PTR_ERR_OR_ZERO(provider);
489 put_child:
490 of_node_put(child_np);
491 return retval;
492 }
493
494 static const struct of_device_id mt65xx_u3phy_id_table[] = {
495 { .compatible = "mediatek,mt8173-u3phy", },
496 { },
497 };
498 MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
499
500 static struct platform_driver mt65xx_u3phy_driver = {
501 .probe = mt65xx_u3phy_probe,
502 .driver = {
503 .name = "mt65xx-u3phy",
504 .of_match_table = mt65xx_u3phy_id_table,
505 },
506 };
507
508 module_platform_driver(mt65xx_u3phy_driver);
509
510 MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
511 MODULE_DESCRIPTION("mt65xx USB PHY driver");
512 MODULE_LICENSE("GPL v2");
513