1 /*
2 * ezx.c - Common code for the EZX platform.
3 *
4 * Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
5 * 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
6 * 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 */
13
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/delay.h>
18 #include <linux/pwm_backlight.h>
19 #include <linux/input.h>
20 #include <linux/gpio.h>
21 #include <linux/gpio_keys.h>
22 #include <linux/leds-lp3944.h>
23 #include <linux/i2c/pxa-i2c.h>
24
25 #include <media/soc_camera.h>
26
27 #include <asm/setup.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30
31 #include <mach/pxa27x.h>
32 #include <linux/platform_data/video-pxafb.h>
33 #include <linux/platform_data/usb-ohci-pxa27x.h>
34 #include <mach/hardware.h>
35 #include <linux/platform_data/keypad-pxa27x.h>
36 #include <linux/platform_data/camera-pxa.h>
37
38 #include "devices.h"
39 #include "generic.h"
40
41 #define EZX_NR_IRQS (IRQ_BOARD_START + 24)
42
43 #define GPIO12_A780_FLIP_LID 12
44 #define GPIO15_A1200_FLIP_LID 15
45 #define GPIO15_A910_FLIP_LID 15
46 #define GPIO12_E680_LOCK_SWITCH 12
47 #define GPIO15_E6_LOCK_SWITCH 15
48 #define GPIO50_nCAM_EN 50
49 #define GPIO19_GEN1_CAM_RST 19
50 #define GPIO28_GEN2_CAM_RST 28
51
52 static struct platform_pwm_backlight_data ezx_backlight_data = {
53 .pwm_id = 0,
54 .max_brightness = 1023,
55 .dft_brightness = 1023,
56 .pwm_period_ns = 78770,
57 .enable_gpio = -1,
58 };
59
60 static struct platform_device ezx_backlight_device = {
61 .name = "pwm-backlight",
62 .dev = {
63 .parent = &pxa27x_device_pwm0.dev,
64 .platform_data = &ezx_backlight_data,
65 },
66 };
67
68 static struct pxafb_mode_info mode_ezx_old = {
69 .pixclock = 150000,
70 .xres = 240,
71 .yres = 320,
72 .bpp = 16,
73 .hsync_len = 10,
74 .left_margin = 20,
75 .right_margin = 10,
76 .vsync_len = 2,
77 .upper_margin = 3,
78 .lower_margin = 2,
79 .sync = 0,
80 };
81
82 static struct pxafb_mach_info ezx_fb_info_1 = {
83 .modes = &mode_ezx_old,
84 .num_modes = 1,
85 .lcd_conn = LCD_COLOR_TFT_16BPP,
86 };
87
88 static struct pxafb_mode_info mode_72r89803y01 = {
89 .pixclock = 192308,
90 .xres = 240,
91 .yres = 320,
92 .bpp = 32,
93 .depth = 18,
94 .hsync_len = 10,
95 .left_margin = 20,
96 .right_margin = 10,
97 .vsync_len = 2,
98 .upper_margin = 3,
99 .lower_margin = 2,
100 .sync = 0,
101 };
102
103 static struct pxafb_mach_info ezx_fb_info_2 = {
104 .modes = &mode_72r89803y01,
105 .num_modes = 1,
106 .lcd_conn = LCD_COLOR_TFT_18BPP,
107 };
108
109 static struct platform_device *ezx_devices[] __initdata = {
110 &ezx_backlight_device,
111 };
112
113 static unsigned long ezx_pin_config[] __initdata = {
114 /* PWM backlight */
115 GPIO16_PWM0_OUT,
116
117 /* BTUART */
118 GPIO42_BTUART_RXD,
119 GPIO43_BTUART_TXD,
120 GPIO44_BTUART_CTS,
121 GPIO45_BTUART_RTS,
122
123 /* I2C */
124 GPIO117_I2C_SCL,
125 GPIO118_I2C_SDA,
126
127 /* PCAP SSP */
128 GPIO29_SSP1_SCLK,
129 GPIO25_SSP1_TXD,
130 GPIO26_SSP1_RXD,
131 GPIO24_GPIO, /* pcap chip select */
132 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
133 GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
134 GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
135
136 /* MMC */
137 GPIO32_MMC_CLK,
138 GPIO92_MMC_DAT_0,
139 GPIO109_MMC_DAT_1,
140 GPIO110_MMC_DAT_2,
141 GPIO111_MMC_DAT_3,
142 GPIO112_MMC_CMD,
143 GPIO11_GPIO, /* mmc detect */
144
145 /* usb to external transceiver */
146 GPIO34_USB_P2_2,
147 GPIO35_USB_P2_1,
148 GPIO36_USB_P2_4,
149 GPIO39_USB_P2_6,
150 GPIO40_USB_P2_5,
151 GPIO53_USB_P2_3,
152
153 /* usb to Neptune GSM chip */
154 GPIO30_USB_P3_2,
155 GPIO31_USB_P3_6,
156 GPIO90_USB_P3_5,
157 GPIO91_USB_P3_1,
158 GPIO56_USB_P3_4,
159 GPIO113_USB_P3_3,
160 };
161
162 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
163 static unsigned long gen1_pin_config[] __initdata = {
164 /* flip / lockswitch */
165 GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
166
167 /* bluetooth (bcm2035) */
168 GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
169 GPIO48_GPIO, /* RESET */
170 GPIO28_GPIO, /* WAKEUP */
171
172 /* Neptune handshake */
173 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
174 GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
175 GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
176 GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
177 GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
178 GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
179
180 /* sound */
181 GPIO52_SSP3_SCLK,
182 GPIO83_SSP3_SFRM,
183 GPIO81_SSP3_TXD,
184 GPIO89_SSP3_RXD,
185
186 /* ssp2 pins to in */
187 GPIO22_GPIO, /* SSP2_SCLK */
188 GPIO37_GPIO, /* SSP2_SFRM */
189 GPIO38_GPIO, /* SSP2_TXD */
190 GPIO88_GPIO, /* SSP2_RXD */
191
192 /* camera */
193 GPIO23_CIF_MCLK,
194 GPIO54_CIF_PCLK,
195 GPIO85_CIF_LV,
196 GPIO84_CIF_FV,
197 GPIO27_CIF_DD_0,
198 GPIO114_CIF_DD_1,
199 GPIO51_CIF_DD_2,
200 GPIO115_CIF_DD_3,
201 GPIO95_CIF_DD_4,
202 GPIO94_CIF_DD_5,
203 GPIO17_CIF_DD_6,
204 GPIO108_CIF_DD_7,
205 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
206 GPIO19_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
207
208 /* EMU */
209 GPIO120_GPIO, /* EMU_MUX1 */
210 GPIO119_GPIO, /* EMU_MUX2 */
211 GPIO86_GPIO, /* SNP_INT_CTL */
212 GPIO87_GPIO, /* SNP_INT_IN */
213 };
214 #endif
215
216 #if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
217 defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
218 static unsigned long gen2_pin_config[] __initdata = {
219 /* flip / lockswitch */
220 GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
221
222 /* EOC */
223 GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
224
225 /* bluetooth (bcm2045) */
226 GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
227 GPIO37_GPIO, /* RESET */
228 GPIO57_GPIO, /* WAKEUP */
229
230 /* Neptune handshake */
231 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
232 GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
233 GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
234 GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
235 GPIO41_GPIO, /* BP_FLASH */
236
237 /* sound */
238 GPIO52_SSP3_SCLK,
239 GPIO83_SSP3_SFRM,
240 GPIO81_SSP3_TXD,
241 GPIO82_SSP3_RXD,
242
243 /* ssp2 pins to in */
244 GPIO22_GPIO, /* SSP2_SCLK */
245 GPIO14_GPIO, /* SSP2_SFRM */
246 GPIO38_GPIO, /* SSP2_TXD */
247 GPIO88_GPIO, /* SSP2_RXD */
248
249 /* camera */
250 GPIO23_CIF_MCLK,
251 GPIO54_CIF_PCLK,
252 GPIO85_CIF_LV,
253 GPIO84_CIF_FV,
254 GPIO27_CIF_DD_0,
255 GPIO114_CIF_DD_1,
256 GPIO51_CIF_DD_2,
257 GPIO115_CIF_DD_3,
258 GPIO95_CIF_DD_4,
259 GPIO48_CIF_DD_5,
260 GPIO93_CIF_DD_6,
261 GPIO12_CIF_DD_7,
262 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
263 GPIO28_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
264 GPIO17_GPIO, /* CAM_FLASH */
265 };
266 #endif
267
268 #ifdef CONFIG_MACH_EZX_A780
269 static unsigned long a780_pin_config[] __initdata = {
270 /* keypad */
271 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
272 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
273 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
274 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
275 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
276 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
277 GPIO103_KP_MKOUT_0,
278 GPIO104_KP_MKOUT_1,
279 GPIO105_KP_MKOUT_2,
280 GPIO106_KP_MKOUT_3,
281 GPIO107_KP_MKOUT_4,
282
283 /* attenuate sound */
284 GPIO96_GPIO,
285 };
286 #endif
287
288 #ifdef CONFIG_MACH_EZX_E680
289 static unsigned long e680_pin_config[] __initdata = {
290 /* keypad */
291 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
292 GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
293 GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
294 GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
295 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
296 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
297 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
298 GPIO103_KP_MKOUT_0,
299 GPIO104_KP_MKOUT_1,
300 GPIO105_KP_MKOUT_2,
301 GPIO106_KP_MKOUT_3,
302
303 /* MIDI */
304 GPIO79_GPIO, /* VA_SEL_BUL */
305 GPIO80_GPIO, /* FLT_SEL_BUL */
306 GPIO78_GPIO, /* MIDI_RESET */
307 GPIO33_GPIO, /* MIDI_CS */
308 GPIO15_GPIO, /* MIDI_IRQ */
309 GPIO49_GPIO, /* MIDI_NPWE */
310 GPIO18_GPIO, /* MIDI_RDY */
311
312 /* leds */
313 GPIO46_GPIO,
314 GPIO47_GPIO,
315 };
316 #endif
317
318 #ifdef CONFIG_MACH_EZX_A1200
319 static unsigned long a1200_pin_config[] __initdata = {
320 /* keypad */
321 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
322 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
323 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
324 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
325 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
326 GPIO103_KP_MKOUT_0,
327 GPIO104_KP_MKOUT_1,
328 GPIO105_KP_MKOUT_2,
329 GPIO106_KP_MKOUT_3,
330 GPIO107_KP_MKOUT_4,
331 GPIO108_KP_MKOUT_5,
332 };
333 #endif
334
335 #ifdef CONFIG_MACH_EZX_A910
336 static unsigned long a910_pin_config[] __initdata = {
337 /* keypad */
338 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
339 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
340 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
341 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
342 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
343 GPIO103_KP_MKOUT_0,
344 GPIO104_KP_MKOUT_1,
345 GPIO105_KP_MKOUT_2,
346 GPIO106_KP_MKOUT_3,
347 GPIO107_KP_MKOUT_4,
348 GPIO108_KP_MKOUT_5,
349
350 /* WLAN */
351 GPIO89_GPIO, /* RESET */
352 GPIO33_GPIO, /* WAKEUP */
353 GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
354
355 /* MMC CS */
356 GPIO20_GPIO,
357 };
358 #endif
359
360 #ifdef CONFIG_MACH_EZX_E2
361 static unsigned long e2_pin_config[] __initdata = {
362 /* keypad */
363 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
364 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
365 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
366 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
367 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
368 GPIO103_KP_MKOUT_0,
369 GPIO104_KP_MKOUT_1,
370 GPIO105_KP_MKOUT_2,
371 GPIO106_KP_MKOUT_3,
372 GPIO107_KP_MKOUT_4,
373 GPIO108_KP_MKOUT_5,
374 };
375 #endif
376
377 #ifdef CONFIG_MACH_EZX_E6
378 static unsigned long e6_pin_config[] __initdata = {
379 /* keypad */
380 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
381 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
382 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
383 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
384 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
385 GPIO103_KP_MKOUT_0,
386 GPIO104_KP_MKOUT_1,
387 GPIO105_KP_MKOUT_2,
388 GPIO106_KP_MKOUT_3,
389 GPIO107_KP_MKOUT_4,
390 GPIO108_KP_MKOUT_5,
391 };
392 #endif
393
394 /* KEYPAD */
395 #ifdef CONFIG_MACH_EZX_A780
396 static const unsigned int a780_key_map[] = {
397 KEY(0, 0, KEY_SEND),
398 KEY(0, 1, KEY_BACK),
399 KEY(0, 2, KEY_END),
400 KEY(0, 3, KEY_PAGEUP),
401 KEY(0, 4, KEY_UP),
402
403 KEY(1, 0, KEY_NUMERIC_1),
404 KEY(1, 1, KEY_NUMERIC_2),
405 KEY(1, 2, KEY_NUMERIC_3),
406 KEY(1, 3, KEY_SELECT),
407 KEY(1, 4, KEY_KPENTER),
408
409 KEY(2, 0, KEY_NUMERIC_4),
410 KEY(2, 1, KEY_NUMERIC_5),
411 KEY(2, 2, KEY_NUMERIC_6),
412 KEY(2, 3, KEY_RECORD),
413 KEY(2, 4, KEY_LEFT),
414
415 KEY(3, 0, KEY_NUMERIC_7),
416 KEY(3, 1, KEY_NUMERIC_8),
417 KEY(3, 2, KEY_NUMERIC_9),
418 KEY(3, 3, KEY_HOME),
419 KEY(3, 4, KEY_RIGHT),
420
421 KEY(4, 0, KEY_NUMERIC_STAR),
422 KEY(4, 1, KEY_NUMERIC_0),
423 KEY(4, 2, KEY_NUMERIC_POUND),
424 KEY(4, 3, KEY_PAGEDOWN),
425 KEY(4, 4, KEY_DOWN),
426 };
427
428 static struct matrix_keymap_data a780_matrix_keymap_data = {
429 .keymap = a780_key_map,
430 .keymap_size = ARRAY_SIZE(a780_key_map),
431 };
432
433 static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
434 .matrix_key_rows = 5,
435 .matrix_key_cols = 5,
436 .matrix_keymap_data = &a780_matrix_keymap_data,
437
438 .direct_key_map = { KEY_CAMERA },
439 .direct_key_num = 1,
440
441 .debounce_interval = 30,
442 };
443 #endif /* CONFIG_MACH_EZX_A780 */
444
445 #ifdef CONFIG_MACH_EZX_E680
446 static const unsigned int e680_key_map[] = {
447 KEY(0, 0, KEY_UP),
448 KEY(0, 1, KEY_RIGHT),
449 KEY(0, 2, KEY_RESERVED),
450 KEY(0, 3, KEY_SEND),
451
452 KEY(1, 0, KEY_DOWN),
453 KEY(1, 1, KEY_LEFT),
454 KEY(1, 2, KEY_PAGEUP),
455 KEY(1, 3, KEY_PAGEDOWN),
456
457 KEY(2, 0, KEY_RESERVED),
458 KEY(2, 1, KEY_RESERVED),
459 KEY(2, 2, KEY_RESERVED),
460 KEY(2, 3, KEY_KPENTER),
461 };
462
463 static struct matrix_keymap_data e680_matrix_keymap_data = {
464 .keymap = e680_key_map,
465 .keymap_size = ARRAY_SIZE(e680_key_map),
466 };
467
468 static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
469 .matrix_key_rows = 3,
470 .matrix_key_cols = 4,
471 .matrix_keymap_data = &e680_matrix_keymap_data,
472
473 .direct_key_map = {
474 KEY_CAMERA,
475 KEY_RESERVED,
476 KEY_RESERVED,
477 KEY_F1,
478 KEY_CANCEL,
479 KEY_F2,
480 },
481 .direct_key_num = 6,
482
483 .debounce_interval = 30,
484 };
485 #endif /* CONFIG_MACH_EZX_E680 */
486
487 #ifdef CONFIG_MACH_EZX_A1200
488 static const unsigned int a1200_key_map[] = {
489 KEY(0, 0, KEY_RESERVED),
490 KEY(0, 1, KEY_RIGHT),
491 KEY(0, 2, KEY_PAGEDOWN),
492 KEY(0, 3, KEY_RESERVED),
493 KEY(0, 4, KEY_RESERVED),
494 KEY(0, 5, KEY_RESERVED),
495
496 KEY(1, 0, KEY_RESERVED),
497 KEY(1, 1, KEY_DOWN),
498 KEY(1, 2, KEY_CAMERA),
499 KEY(1, 3, KEY_RESERVED),
500 KEY(1, 4, KEY_RESERVED),
501 KEY(1, 5, KEY_RESERVED),
502
503 KEY(2, 0, KEY_RESERVED),
504 KEY(2, 1, KEY_KPENTER),
505 KEY(2, 2, KEY_RECORD),
506 KEY(2, 3, KEY_RESERVED),
507 KEY(2, 4, KEY_RESERVED),
508 KEY(2, 5, KEY_SELECT),
509
510 KEY(3, 0, KEY_RESERVED),
511 KEY(3, 1, KEY_UP),
512 KEY(3, 2, KEY_SEND),
513 KEY(3, 3, KEY_RESERVED),
514 KEY(3, 4, KEY_RESERVED),
515 KEY(3, 5, KEY_RESERVED),
516
517 KEY(4, 0, KEY_RESERVED),
518 KEY(4, 1, KEY_LEFT),
519 KEY(4, 2, KEY_PAGEUP),
520 KEY(4, 3, KEY_RESERVED),
521 KEY(4, 4, KEY_RESERVED),
522 KEY(4, 5, KEY_RESERVED),
523 };
524
525 static struct matrix_keymap_data a1200_matrix_keymap_data = {
526 .keymap = a1200_key_map,
527 .keymap_size = ARRAY_SIZE(a1200_key_map),
528 };
529
530 static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
531 .matrix_key_rows = 5,
532 .matrix_key_cols = 6,
533 .matrix_keymap_data = &a1200_matrix_keymap_data,
534
535 .debounce_interval = 30,
536 };
537 #endif /* CONFIG_MACH_EZX_A1200 */
538
539 #ifdef CONFIG_MACH_EZX_E6
540 static const unsigned int e6_key_map[] = {
541 KEY(0, 0, KEY_RESERVED),
542 KEY(0, 1, KEY_RIGHT),
543 KEY(0, 2, KEY_PAGEDOWN),
544 KEY(0, 3, KEY_RESERVED),
545 KEY(0, 4, KEY_RESERVED),
546 KEY(0, 5, KEY_NEXTSONG),
547
548 KEY(1, 0, KEY_RESERVED),
549 KEY(1, 1, KEY_DOWN),
550 KEY(1, 2, KEY_PROG1),
551 KEY(1, 3, KEY_RESERVED),
552 KEY(1, 4, KEY_RESERVED),
553 KEY(1, 5, KEY_RESERVED),
554
555 KEY(2, 0, KEY_RESERVED),
556 KEY(2, 1, KEY_ENTER),
557 KEY(2, 2, KEY_CAMERA),
558 KEY(2, 3, KEY_RESERVED),
559 KEY(2, 4, KEY_RESERVED),
560 KEY(2, 5, KEY_WWW),
561
562 KEY(3, 0, KEY_RESERVED),
563 KEY(3, 1, KEY_UP),
564 KEY(3, 2, KEY_SEND),
565 KEY(3, 3, KEY_RESERVED),
566 KEY(3, 4, KEY_RESERVED),
567 KEY(3, 5, KEY_PLAYPAUSE),
568
569 KEY(4, 0, KEY_RESERVED),
570 KEY(4, 1, KEY_LEFT),
571 KEY(4, 2, KEY_PAGEUP),
572 KEY(4, 3, KEY_RESERVED),
573 KEY(4, 4, KEY_RESERVED),
574 KEY(4, 5, KEY_PREVIOUSSONG),
575 };
576
577 static struct matrix_keymap_data e6_keymap_data = {
578 .keymap = e6_key_map,
579 .keymap_size = ARRAY_SIZE(e6_key_map),
580 };
581
582 static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
583 .matrix_key_rows = 5,
584 .matrix_key_cols = 6,
585 .matrix_keymap_data = &e6_keymap_data,
586
587 .debounce_interval = 30,
588 };
589 #endif /* CONFIG_MACH_EZX_E6 */
590
591 #ifdef CONFIG_MACH_EZX_A910
592 static const unsigned int a910_key_map[] = {
593 KEY(0, 0, KEY_NUMERIC_6),
594 KEY(0, 1, KEY_RIGHT),
595 KEY(0, 2, KEY_PAGEDOWN),
596 KEY(0, 3, KEY_KPENTER),
597 KEY(0, 4, KEY_NUMERIC_5),
598 KEY(0, 5, KEY_CAMERA),
599
600 KEY(1, 0, KEY_NUMERIC_8),
601 KEY(1, 1, KEY_DOWN),
602 KEY(1, 2, KEY_RESERVED),
603 KEY(1, 3, KEY_F1), /* Left SoftKey */
604 KEY(1, 4, KEY_NUMERIC_STAR),
605 KEY(1, 5, KEY_RESERVED),
606
607 KEY(2, 0, KEY_NUMERIC_7),
608 KEY(2, 1, KEY_NUMERIC_9),
609 KEY(2, 2, KEY_RECORD),
610 KEY(2, 3, KEY_F2), /* Right SoftKey */
611 KEY(2, 4, KEY_BACK),
612 KEY(2, 5, KEY_SELECT),
613
614 KEY(3, 0, KEY_NUMERIC_2),
615 KEY(3, 1, KEY_UP),
616 KEY(3, 2, KEY_SEND),
617 KEY(3, 3, KEY_NUMERIC_0),
618 KEY(3, 4, KEY_NUMERIC_1),
619 KEY(3, 5, KEY_RECORD),
620
621 KEY(4, 0, KEY_NUMERIC_4),
622 KEY(4, 1, KEY_LEFT),
623 KEY(4, 2, KEY_PAGEUP),
624 KEY(4, 3, KEY_NUMERIC_POUND),
625 KEY(4, 4, KEY_NUMERIC_3),
626 KEY(4, 5, KEY_RESERVED),
627 };
628
629 static struct matrix_keymap_data a910_matrix_keymap_data = {
630 .keymap = a910_key_map,
631 .keymap_size = ARRAY_SIZE(a910_key_map),
632 };
633
634 static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
635 .matrix_key_rows = 5,
636 .matrix_key_cols = 6,
637 .matrix_keymap_data = &a910_matrix_keymap_data,
638
639 .debounce_interval = 30,
640 };
641 #endif /* CONFIG_MACH_EZX_A910 */
642
643 #ifdef CONFIG_MACH_EZX_E2
644 static const unsigned int e2_key_map[] = {
645 KEY(0, 0, KEY_NUMERIC_6),
646 KEY(0, 1, KEY_RIGHT),
647 KEY(0, 2, KEY_NUMERIC_9),
648 KEY(0, 3, KEY_NEXTSONG),
649 KEY(0, 4, KEY_NUMERIC_5),
650 KEY(0, 5, KEY_F1), /* Left SoftKey */
651
652 KEY(1, 0, KEY_NUMERIC_8),
653 KEY(1, 1, KEY_DOWN),
654 KEY(1, 2, KEY_RESERVED),
655 KEY(1, 3, KEY_PAGEUP),
656 KEY(1, 4, KEY_NUMERIC_STAR),
657 KEY(1, 5, KEY_F2), /* Right SoftKey */
658
659 KEY(2, 0, KEY_NUMERIC_7),
660 KEY(2, 1, KEY_KPENTER),
661 KEY(2, 2, KEY_RECORD),
662 KEY(2, 3, KEY_PAGEDOWN),
663 KEY(2, 4, KEY_BACK),
664 KEY(2, 5, KEY_NUMERIC_0),
665
666 KEY(3, 0, KEY_NUMERIC_2),
667 KEY(3, 1, KEY_UP),
668 KEY(3, 2, KEY_SEND),
669 KEY(3, 3, KEY_PLAYPAUSE),
670 KEY(3, 4, KEY_NUMERIC_1),
671 KEY(3, 5, KEY_SOUND), /* Music SoftKey */
672
673 KEY(4, 0, KEY_NUMERIC_4),
674 KEY(4, 1, KEY_LEFT),
675 KEY(4, 2, KEY_NUMERIC_POUND),
676 KEY(4, 3, KEY_PREVIOUSSONG),
677 KEY(4, 4, KEY_NUMERIC_3),
678 KEY(4, 5, KEY_RESERVED),
679 };
680
681 static struct matrix_keymap_data e2_matrix_keymap_data = {
682 .keymap = e2_key_map,
683 .keymap_size = ARRAY_SIZE(e2_key_map),
684 };
685
686 static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
687 .matrix_key_rows = 5,
688 .matrix_key_cols = 6,
689 .matrix_keymap_data = &e2_matrix_keymap_data,
690
691 .debounce_interval = 30,
692 };
693 #endif /* CONFIG_MACH_EZX_E2 */
694
695 #ifdef CONFIG_MACH_EZX_A780
696 /* gpio_keys */
697 static struct gpio_keys_button a780_buttons[] = {
698 [0] = {
699 .code = SW_LID,
700 .gpio = GPIO12_A780_FLIP_LID,
701 .active_low = 0,
702 .desc = "A780 flip lid",
703 .type = EV_SW,
704 .wakeup = 1,
705 },
706 };
707
708 static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
709 .buttons = a780_buttons,
710 .nbuttons = ARRAY_SIZE(a780_buttons),
711 };
712
713 static struct platform_device a780_gpio_keys = {
714 .name = "gpio-keys",
715 .id = -1,
716 .dev = {
717 .platform_data = &a780_gpio_keys_platform_data,
718 },
719 };
720
721 /* camera */
a780_camera_init(void)722 static int a780_camera_init(void)
723 {
724 int err;
725
726 /*
727 * GPIO50_nCAM_EN is active low
728 * GPIO19_GEN1_CAM_RST is active on rising edge
729 */
730 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
731 if (err) {
732 pr_err("%s: Failed to request nCAM_EN\n", __func__);
733 goto fail;
734 }
735
736 err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
737 if (err) {
738 pr_err("%s: Failed to request CAM_RST\n", __func__);
739 goto fail_gpio_cam_rst;
740 }
741
742 gpio_direction_output(GPIO50_nCAM_EN, 1);
743 gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
744
745 return 0;
746
747 fail_gpio_cam_rst:
748 gpio_free(GPIO50_nCAM_EN);
749 fail:
750 return err;
751 }
752
a780_camera_power(struct device * dev,int on)753 static int a780_camera_power(struct device *dev, int on)
754 {
755 gpio_set_value(GPIO50_nCAM_EN, !on);
756 return 0;
757 }
758
a780_camera_reset(struct device * dev)759 static int a780_camera_reset(struct device *dev)
760 {
761 gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
762 msleep(10);
763 gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
764
765 return 0;
766 }
767
768 struct pxacamera_platform_data a780_pxacamera_platform_data = {
769 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
770 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
771 .mclk_10khz = 5000,
772 };
773
774 static struct i2c_board_info a780_camera_i2c_board_info = {
775 I2C_BOARD_INFO("mt9m111", 0x5d),
776 };
777
778 static struct soc_camera_link a780_iclink = {
779 .bus_id = 0,
780 .flags = SOCAM_SENSOR_INVERT_PCLK,
781 .i2c_adapter_id = 0,
782 .board_info = &a780_camera_i2c_board_info,
783 .power = a780_camera_power,
784 .reset = a780_camera_reset,
785 };
786
787 static struct platform_device a780_camera = {
788 .name = "soc-camera-pdrv",
789 .id = 0,
790 .dev = {
791 .platform_data = &a780_iclink,
792 },
793 };
794
795 static struct platform_device *a780_devices[] __initdata = {
796 &a780_gpio_keys,
797 };
798
a780_init(void)799 static void __init a780_init(void)
800 {
801 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
802 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
803 pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
804
805 pxa_set_ffuart_info(NULL);
806 pxa_set_btuart_info(NULL);
807 pxa_set_stuart_info(NULL);
808
809 pxa_set_i2c_info(NULL);
810
811 pxa_set_fb_info(NULL, &ezx_fb_info_1);
812
813 pxa_set_keypad_info(&a780_keypad_platform_data);
814
815 if (a780_camera_init() == 0) {
816 pxa_set_camera_info(&a780_pxacamera_platform_data);
817 platform_device_register(&a780_camera);
818 }
819
820 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
821 platform_add_devices(ARRAY_AND_SIZE(a780_devices));
822 }
823
824 MACHINE_START(EZX_A780, "Motorola EZX A780")
825 .atag_offset = 0x100,
826 .map_io = pxa27x_map_io,
827 .nr_irqs = EZX_NR_IRQS,
828 .init_irq = pxa27x_init_irq,
829 .handle_irq = pxa27x_handle_irq,
830 .init_time = pxa_timer_init,
831 .init_machine = a780_init,
832 .restart = pxa_restart,
833 MACHINE_END
834 #endif
835
836 #ifdef CONFIG_MACH_EZX_E680
837 /* gpio_keys */
838 static struct gpio_keys_button e680_buttons[] = {
839 [0] = {
840 .code = KEY_SCREENLOCK,
841 .gpio = GPIO12_E680_LOCK_SWITCH,
842 .active_low = 0,
843 .desc = "E680 lock switch",
844 .type = EV_KEY,
845 .wakeup = 1,
846 },
847 };
848
849 static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
850 .buttons = e680_buttons,
851 .nbuttons = ARRAY_SIZE(e680_buttons),
852 };
853
854 static struct platform_device e680_gpio_keys = {
855 .name = "gpio-keys",
856 .id = -1,
857 .dev = {
858 .platform_data = &e680_gpio_keys_platform_data,
859 },
860 };
861
862 static struct i2c_board_info __initdata e680_i2c_board_info[] = {
863 { I2C_BOARD_INFO("tea5767", 0x81) },
864 };
865
866 static struct platform_device *e680_devices[] __initdata = {
867 &e680_gpio_keys,
868 };
869
e680_init(void)870 static void __init e680_init(void)
871 {
872 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
873 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
874 pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
875
876 pxa_set_ffuart_info(NULL);
877 pxa_set_btuart_info(NULL);
878 pxa_set_stuart_info(NULL);
879
880 pxa_set_i2c_info(NULL);
881 i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
882
883 pxa_set_fb_info(NULL, &ezx_fb_info_1);
884
885 pxa_set_keypad_info(&e680_keypad_platform_data);
886
887 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
888 platform_add_devices(ARRAY_AND_SIZE(e680_devices));
889 }
890
891 MACHINE_START(EZX_E680, "Motorola EZX E680")
892 .atag_offset = 0x100,
893 .map_io = pxa27x_map_io,
894 .nr_irqs = EZX_NR_IRQS,
895 .init_irq = pxa27x_init_irq,
896 .handle_irq = pxa27x_handle_irq,
897 .init_time = pxa_timer_init,
898 .init_machine = e680_init,
899 .restart = pxa_restart,
900 MACHINE_END
901 #endif
902
903 #ifdef CONFIG_MACH_EZX_A1200
904 /* gpio_keys */
905 static struct gpio_keys_button a1200_buttons[] = {
906 [0] = {
907 .code = SW_LID,
908 .gpio = GPIO15_A1200_FLIP_LID,
909 .active_low = 0,
910 .desc = "A1200 flip lid",
911 .type = EV_SW,
912 .wakeup = 1,
913 },
914 };
915
916 static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
917 .buttons = a1200_buttons,
918 .nbuttons = ARRAY_SIZE(a1200_buttons),
919 };
920
921 static struct platform_device a1200_gpio_keys = {
922 .name = "gpio-keys",
923 .id = -1,
924 .dev = {
925 .platform_data = &a1200_gpio_keys_platform_data,
926 },
927 };
928
929 static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
930 { I2C_BOARD_INFO("tea5767", 0x81) },
931 };
932
933 static struct platform_device *a1200_devices[] __initdata = {
934 &a1200_gpio_keys,
935 };
936
a1200_init(void)937 static void __init a1200_init(void)
938 {
939 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
940 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
941 pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
942
943 pxa_set_ffuart_info(NULL);
944 pxa_set_btuart_info(NULL);
945 pxa_set_stuart_info(NULL);
946
947 pxa_set_i2c_info(NULL);
948 i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
949
950 pxa_set_fb_info(NULL, &ezx_fb_info_2);
951
952 pxa_set_keypad_info(&a1200_keypad_platform_data);
953
954 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
955 platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
956 }
957
958 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
959 .atag_offset = 0x100,
960 .map_io = pxa27x_map_io,
961 .nr_irqs = EZX_NR_IRQS,
962 .init_irq = pxa27x_init_irq,
963 .handle_irq = pxa27x_handle_irq,
964 .init_time = pxa_timer_init,
965 .init_machine = a1200_init,
966 .restart = pxa_restart,
967 MACHINE_END
968 #endif
969
970 #ifdef CONFIG_MACH_EZX_A910
971 /* gpio_keys */
972 static struct gpio_keys_button a910_buttons[] = {
973 [0] = {
974 .code = SW_LID,
975 .gpio = GPIO15_A910_FLIP_LID,
976 .active_low = 0,
977 .desc = "A910 flip lid",
978 .type = EV_SW,
979 .wakeup = 1,
980 },
981 };
982
983 static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
984 .buttons = a910_buttons,
985 .nbuttons = ARRAY_SIZE(a910_buttons),
986 };
987
988 static struct platform_device a910_gpio_keys = {
989 .name = "gpio-keys",
990 .id = -1,
991 .dev = {
992 .platform_data = &a910_gpio_keys_platform_data,
993 },
994 };
995
996 /* camera */
a910_camera_init(void)997 static int a910_camera_init(void)
998 {
999 int err;
1000
1001 /*
1002 * GPIO50_nCAM_EN is active low
1003 * GPIO28_GEN2_CAM_RST is active on rising edge
1004 */
1005 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
1006 if (err) {
1007 pr_err("%s: Failed to request nCAM_EN\n", __func__);
1008 goto fail;
1009 }
1010
1011 err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
1012 if (err) {
1013 pr_err("%s: Failed to request CAM_RST\n", __func__);
1014 goto fail_gpio_cam_rst;
1015 }
1016
1017 gpio_direction_output(GPIO50_nCAM_EN, 1);
1018 gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
1019
1020 return 0;
1021
1022 fail_gpio_cam_rst:
1023 gpio_free(GPIO50_nCAM_EN);
1024 fail:
1025 return err;
1026 }
1027
a910_camera_power(struct device * dev,int on)1028 static int a910_camera_power(struct device *dev, int on)
1029 {
1030 gpio_set_value(GPIO50_nCAM_EN, !on);
1031 return 0;
1032 }
1033
a910_camera_reset(struct device * dev)1034 static int a910_camera_reset(struct device *dev)
1035 {
1036 gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
1037 msleep(10);
1038 gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
1039
1040 return 0;
1041 }
1042
1043 struct pxacamera_platform_data a910_pxacamera_platform_data = {
1044 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
1045 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
1046 .mclk_10khz = 5000,
1047 };
1048
1049 static struct i2c_board_info a910_camera_i2c_board_info = {
1050 I2C_BOARD_INFO("mt9m111", 0x5d),
1051 };
1052
1053 static struct soc_camera_link a910_iclink = {
1054 .bus_id = 0,
1055 .i2c_adapter_id = 0,
1056 .board_info = &a910_camera_i2c_board_info,
1057 .power = a910_camera_power,
1058 .reset = a910_camera_reset,
1059 };
1060
1061 static struct platform_device a910_camera = {
1062 .name = "soc-camera-pdrv",
1063 .id = 0,
1064 .dev = {
1065 .platform_data = &a910_iclink,
1066 },
1067 };
1068
1069 /* leds-lp3944 */
1070 static struct lp3944_platform_data a910_lp3944_leds = {
1071 .leds_size = LP3944_LEDS_MAX,
1072 .leds = {
1073 [0] = {
1074 .name = "a910:red:",
1075 .status = LP3944_LED_STATUS_OFF,
1076 .type = LP3944_LED_TYPE_LED,
1077 },
1078 [1] = {
1079 .name = "a910:green:",
1080 .status = LP3944_LED_STATUS_OFF,
1081 .type = LP3944_LED_TYPE_LED,
1082 },
1083 [2] {
1084 .name = "a910:blue:",
1085 .status = LP3944_LED_STATUS_OFF,
1086 .type = LP3944_LED_TYPE_LED,
1087 },
1088 /* Leds 3 and 4 are used as display power switches */
1089 [3] = {
1090 .name = "a910::cli_display",
1091 .status = LP3944_LED_STATUS_OFF,
1092 .type = LP3944_LED_TYPE_LED_INVERTED
1093 },
1094 [4] = {
1095 .name = "a910::main_display",
1096 .status = LP3944_LED_STATUS_ON,
1097 .type = LP3944_LED_TYPE_LED_INVERTED
1098 },
1099 [5] = { .type = LP3944_LED_TYPE_NONE },
1100 [6] = {
1101 .name = "a910::torch",
1102 .status = LP3944_LED_STATUS_OFF,
1103 .type = LP3944_LED_TYPE_LED,
1104 },
1105 [7] = {
1106 .name = "a910::flash",
1107 .status = LP3944_LED_STATUS_OFF,
1108 .type = LP3944_LED_TYPE_LED_INVERTED,
1109 },
1110 },
1111 };
1112
1113 static struct i2c_board_info __initdata a910_i2c_board_info[] = {
1114 {
1115 I2C_BOARD_INFO("lp3944", 0x60),
1116 .platform_data = &a910_lp3944_leds,
1117 },
1118 };
1119
1120 static struct platform_device *a910_devices[] __initdata = {
1121 &a910_gpio_keys,
1122 };
1123
a910_init(void)1124 static void __init a910_init(void)
1125 {
1126 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1127 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1128 pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
1129
1130 pxa_set_ffuart_info(NULL);
1131 pxa_set_btuart_info(NULL);
1132 pxa_set_stuart_info(NULL);
1133
1134 pxa_set_i2c_info(NULL);
1135 i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
1136
1137 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1138
1139 pxa_set_keypad_info(&a910_keypad_platform_data);
1140
1141 if (a910_camera_init() == 0) {
1142 pxa_set_camera_info(&a910_pxacamera_platform_data);
1143 platform_device_register(&a910_camera);
1144 }
1145
1146 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1147 platform_add_devices(ARRAY_AND_SIZE(a910_devices));
1148 }
1149
1150 MACHINE_START(EZX_A910, "Motorola EZX A910")
1151 .atag_offset = 0x100,
1152 .map_io = pxa27x_map_io,
1153 .nr_irqs = EZX_NR_IRQS,
1154 .init_irq = pxa27x_init_irq,
1155 .handle_irq = pxa27x_handle_irq,
1156 .init_time = pxa_timer_init,
1157 .init_machine = a910_init,
1158 .restart = pxa_restart,
1159 MACHINE_END
1160 #endif
1161
1162 #ifdef CONFIG_MACH_EZX_E6
1163 /* gpio_keys */
1164 static struct gpio_keys_button e6_buttons[] = {
1165 [0] = {
1166 .code = KEY_SCREENLOCK,
1167 .gpio = GPIO15_E6_LOCK_SWITCH,
1168 .active_low = 0,
1169 .desc = "E6 lock switch",
1170 .type = EV_KEY,
1171 .wakeup = 1,
1172 },
1173 };
1174
1175 static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
1176 .buttons = e6_buttons,
1177 .nbuttons = ARRAY_SIZE(e6_buttons),
1178 };
1179
1180 static struct platform_device e6_gpio_keys = {
1181 .name = "gpio-keys",
1182 .id = -1,
1183 .dev = {
1184 .platform_data = &e6_gpio_keys_platform_data,
1185 },
1186 };
1187
1188 static struct i2c_board_info __initdata e6_i2c_board_info[] = {
1189 { I2C_BOARD_INFO("tea5767", 0x81) },
1190 };
1191
1192 static struct platform_device *e6_devices[] __initdata = {
1193 &e6_gpio_keys,
1194 };
1195
e6_init(void)1196 static void __init e6_init(void)
1197 {
1198 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1199 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1200 pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
1201
1202 pxa_set_ffuart_info(NULL);
1203 pxa_set_btuart_info(NULL);
1204 pxa_set_stuart_info(NULL);
1205
1206 pxa_set_i2c_info(NULL);
1207 i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
1208
1209 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1210
1211 pxa_set_keypad_info(&e6_keypad_platform_data);
1212
1213 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1214 platform_add_devices(ARRAY_AND_SIZE(e6_devices));
1215 }
1216
1217 MACHINE_START(EZX_E6, "Motorola EZX E6")
1218 .atag_offset = 0x100,
1219 .map_io = pxa27x_map_io,
1220 .nr_irqs = EZX_NR_IRQS,
1221 .init_irq = pxa27x_init_irq,
1222 .handle_irq = pxa27x_handle_irq,
1223 .init_time = pxa_timer_init,
1224 .init_machine = e6_init,
1225 .restart = pxa_restart,
1226 MACHINE_END
1227 #endif
1228
1229 #ifdef CONFIG_MACH_EZX_E2
1230 static struct i2c_board_info __initdata e2_i2c_board_info[] = {
1231 { I2C_BOARD_INFO("tea5767", 0x81) },
1232 };
1233
1234 static struct platform_device *e2_devices[] __initdata = {
1235 };
1236
e2_init(void)1237 static void __init e2_init(void)
1238 {
1239 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1240 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1241 pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
1242
1243 pxa_set_ffuart_info(NULL);
1244 pxa_set_btuart_info(NULL);
1245 pxa_set_stuart_info(NULL);
1246
1247 pxa_set_i2c_info(NULL);
1248 i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
1249
1250 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1251
1252 pxa_set_keypad_info(&e2_keypad_platform_data);
1253
1254 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1255 platform_add_devices(ARRAY_AND_SIZE(e2_devices));
1256 }
1257
1258 MACHINE_START(EZX_E2, "Motorola EZX E2")
1259 .atag_offset = 0x100,
1260 .map_io = pxa27x_map_io,
1261 .nr_irqs = EZX_NR_IRQS,
1262 .init_irq = pxa27x_init_irq,
1263 .handle_irq = pxa27x_handle_irq,
1264 .init_time = pxa_timer_init,
1265 .init_machine = e2_init,
1266 .restart = pxa_restart,
1267 MACHINE_END
1268 #endif
1269