1 /*
2 * linux/arch/arm/common/sa1111.c
3 *
4 * SA1111 support
5 *
6 * Original code by John Dorsey
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * This file contains all generic SA1111 support.
13 *
14 * All initialization functions provided here are intended to be called
15 * from machine specific code with proper arguments when required.
16 */
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/irq.h>
20 #include <linux/kernel.h>
21 #include <linux/delay.h>
22 #include <linux/errno.h>
23 #include <linux/ioport.h>
24 #include <linux/platform_device.h>
25 #include <linux/slab.h>
26 #include <linux/spinlock.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/clk.h>
29 #include <linux/io.h>
30
31 #include <mach/hardware.h>
32 #include <asm/mach/irq.h>
33 #include <asm/mach-types.h>
34 #include <asm/sizes.h>
35
36 #include <asm/hardware/sa1111.h>
37
38 /* SA1111 IRQs */
39 #define IRQ_GPAIN0 (0)
40 #define IRQ_GPAIN1 (1)
41 #define IRQ_GPAIN2 (2)
42 #define IRQ_GPAIN3 (3)
43 #define IRQ_GPBIN0 (4)
44 #define IRQ_GPBIN1 (5)
45 #define IRQ_GPBIN2 (6)
46 #define IRQ_GPBIN3 (7)
47 #define IRQ_GPBIN4 (8)
48 #define IRQ_GPBIN5 (9)
49 #define IRQ_GPCIN0 (10)
50 #define IRQ_GPCIN1 (11)
51 #define IRQ_GPCIN2 (12)
52 #define IRQ_GPCIN3 (13)
53 #define IRQ_GPCIN4 (14)
54 #define IRQ_GPCIN5 (15)
55 #define IRQ_GPCIN6 (16)
56 #define IRQ_GPCIN7 (17)
57 #define IRQ_MSTXINT (18)
58 #define IRQ_MSRXINT (19)
59 #define IRQ_MSSTOPERRINT (20)
60 #define IRQ_TPTXINT (21)
61 #define IRQ_TPRXINT (22)
62 #define IRQ_TPSTOPERRINT (23)
63 #define SSPXMTINT (24)
64 #define SSPRCVINT (25)
65 #define SSPROR (26)
66 #define AUDXMTDMADONEA (32)
67 #define AUDRCVDMADONEA (33)
68 #define AUDXMTDMADONEB (34)
69 #define AUDRCVDMADONEB (35)
70 #define AUDTFSR (36)
71 #define AUDRFSR (37)
72 #define AUDTUR (38)
73 #define AUDROR (39)
74 #define AUDDTS (40)
75 #define AUDRDD (41)
76 #define AUDSTO (42)
77 #define IRQ_USBPWR (43)
78 #define IRQ_HCIM (44)
79 #define IRQ_HCIBUFFACC (45)
80 #define IRQ_HCIRMTWKP (46)
81 #define IRQ_NHCIMFCIR (47)
82 #define IRQ_USB_PORT_RESUME (48)
83 #define IRQ_S0_READY_NINT (49)
84 #define IRQ_S1_READY_NINT (50)
85 #define IRQ_S0_CD_VALID (51)
86 #define IRQ_S1_CD_VALID (52)
87 #define IRQ_S0_BVD1_STSCHG (53)
88 #define IRQ_S1_BVD1_STSCHG (54)
89 #define SA1111_IRQ_NR (55)
90
91 extern void sa1110_mb_enable(void);
92 extern void sa1110_mb_disable(void);
93
94 /*
95 * We keep the following data for the overall SA1111. Note that the
96 * struct device and struct resource are "fake"; they should be supplied
97 * by the bus above us. However, in the interests of getting all SA1111
98 * drivers converted over to the device model, we provide this as an
99 * anchor point for all the other drivers.
100 */
101 struct sa1111 {
102 struct device *dev;
103 struct clk *clk;
104 unsigned long phys;
105 int irq;
106 int irq_base; /* base for cascaded on-chip IRQs */
107 spinlock_t lock;
108 void __iomem *base;
109 struct sa1111_platform_data *pdata;
110 #ifdef CONFIG_PM
111 void *saved_state;
112 #endif
113 };
114
115 /*
116 * We _really_ need to eliminate this. Its only users
117 * are the PWM and DMA checking code.
118 */
119 static struct sa1111 *g_sa1111;
120
121 struct sa1111_dev_info {
122 unsigned long offset;
123 unsigned long skpcr_mask;
124 bool dma;
125 unsigned int devid;
126 unsigned int irq[6];
127 };
128
129 static struct sa1111_dev_info sa1111_devices[] = {
130 {
131 .offset = SA1111_USB,
132 .skpcr_mask = SKPCR_UCLKEN,
133 .dma = true,
134 .devid = SA1111_DEVID_USB,
135 .irq = {
136 IRQ_USBPWR,
137 IRQ_HCIM,
138 IRQ_HCIBUFFACC,
139 IRQ_HCIRMTWKP,
140 IRQ_NHCIMFCIR,
141 IRQ_USB_PORT_RESUME
142 },
143 },
144 {
145 .offset = 0x0600,
146 .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
147 .dma = true,
148 .devid = SA1111_DEVID_SAC,
149 .irq = {
150 AUDXMTDMADONEA,
151 AUDXMTDMADONEB,
152 AUDRCVDMADONEA,
153 AUDRCVDMADONEB
154 },
155 },
156 {
157 .offset = 0x0800,
158 .skpcr_mask = SKPCR_SCLKEN,
159 .devid = SA1111_DEVID_SSP,
160 },
161 {
162 .offset = SA1111_KBD,
163 .skpcr_mask = SKPCR_PTCLKEN,
164 .devid = SA1111_DEVID_PS2_KBD,
165 .irq = {
166 IRQ_TPRXINT,
167 IRQ_TPTXINT
168 },
169 },
170 {
171 .offset = SA1111_MSE,
172 .skpcr_mask = SKPCR_PMCLKEN,
173 .devid = SA1111_DEVID_PS2_MSE,
174 .irq = {
175 IRQ_MSRXINT,
176 IRQ_MSTXINT
177 },
178 },
179 {
180 .offset = 0x1800,
181 .skpcr_mask = 0,
182 .devid = SA1111_DEVID_PCMCIA,
183 .irq = {
184 IRQ_S0_READY_NINT,
185 IRQ_S0_CD_VALID,
186 IRQ_S0_BVD1_STSCHG,
187 IRQ_S1_READY_NINT,
188 IRQ_S1_CD_VALID,
189 IRQ_S1_BVD1_STSCHG,
190 },
191 },
192 };
193
194 /*
195 * SA1111 interrupt support. Since clearing an IRQ while there are
196 * active IRQs causes the interrupt output to pulse, the upper levels
197 * will call us again if there are more interrupts to process.
198 */
199 static void
sa1111_irq_handler(unsigned int irq,struct irq_desc * desc)200 sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
201 {
202 unsigned int stat0, stat1, i;
203 struct sa1111 *sachip = irq_get_handler_data(irq);
204 void __iomem *mapbase = sachip->base + SA1111_INTC;
205
206 stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
207 stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
208
209 sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
210
211 desc->irq_data.chip->irq_ack(&desc->irq_data);
212
213 sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
214
215 if (stat0 == 0 && stat1 == 0) {
216 do_bad_IRQ(irq, desc);
217 return;
218 }
219
220 for (i = 0; stat0; i++, stat0 >>= 1)
221 if (stat0 & 1)
222 generic_handle_irq(i + sachip->irq_base);
223
224 for (i = 32; stat1; i++, stat1 >>= 1)
225 if (stat1 & 1)
226 generic_handle_irq(i + sachip->irq_base);
227
228 /* For level-based interrupts */
229 desc->irq_data.chip->irq_unmask(&desc->irq_data);
230 }
231
232 #define SA1111_IRQMASK_LO(x) (1 << (x - sachip->irq_base))
233 #define SA1111_IRQMASK_HI(x) (1 << (x - sachip->irq_base - 32))
234
sa1111_ack_irq(struct irq_data * d)235 static void sa1111_ack_irq(struct irq_data *d)
236 {
237 }
238
sa1111_mask_lowirq(struct irq_data * d)239 static void sa1111_mask_lowirq(struct irq_data *d)
240 {
241 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
242 void __iomem *mapbase = sachip->base + SA1111_INTC;
243 unsigned long ie0;
244
245 ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
246 ie0 &= ~SA1111_IRQMASK_LO(d->irq);
247 writel(ie0, mapbase + SA1111_INTEN0);
248 }
249
sa1111_unmask_lowirq(struct irq_data * d)250 static void sa1111_unmask_lowirq(struct irq_data *d)
251 {
252 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
253 void __iomem *mapbase = sachip->base + SA1111_INTC;
254 unsigned long ie0;
255
256 ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
257 ie0 |= SA1111_IRQMASK_LO(d->irq);
258 sa1111_writel(ie0, mapbase + SA1111_INTEN0);
259 }
260
261 /*
262 * Attempt to re-trigger the interrupt. The SA1111 contains a register
263 * (INTSET) which claims to do this. However, in practice no amount of
264 * manipulation of INTEN and INTSET guarantees that the interrupt will
265 * be triggered. In fact, its very difficult, if not impossible to get
266 * INTSET to re-trigger the interrupt.
267 */
sa1111_retrigger_lowirq(struct irq_data * d)268 static int sa1111_retrigger_lowirq(struct irq_data *d)
269 {
270 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
271 void __iomem *mapbase = sachip->base + SA1111_INTC;
272 unsigned int mask = SA1111_IRQMASK_LO(d->irq);
273 unsigned long ip0;
274 int i;
275
276 ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
277 for (i = 0; i < 8; i++) {
278 sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0);
279 sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
280 if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask)
281 break;
282 }
283
284 if (i == 8)
285 pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
286 d->irq);
287 return i == 8 ? -1 : 0;
288 }
289
sa1111_type_lowirq(struct irq_data * d,unsigned int flags)290 static int sa1111_type_lowirq(struct irq_data *d, unsigned int flags)
291 {
292 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
293 void __iomem *mapbase = sachip->base + SA1111_INTC;
294 unsigned int mask = SA1111_IRQMASK_LO(d->irq);
295 unsigned long ip0;
296
297 if (flags == IRQ_TYPE_PROBE)
298 return 0;
299
300 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
301 return -EINVAL;
302
303 ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
304 if (flags & IRQ_TYPE_EDGE_RISING)
305 ip0 &= ~mask;
306 else
307 ip0 |= mask;
308 sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
309 sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0);
310
311 return 0;
312 }
313
sa1111_wake_lowirq(struct irq_data * d,unsigned int on)314 static int sa1111_wake_lowirq(struct irq_data *d, unsigned int on)
315 {
316 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
317 void __iomem *mapbase = sachip->base + SA1111_INTC;
318 unsigned int mask = SA1111_IRQMASK_LO(d->irq);
319 unsigned long we0;
320
321 we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
322 if (on)
323 we0 |= mask;
324 else
325 we0 &= ~mask;
326 sa1111_writel(we0, mapbase + SA1111_WAKEEN0);
327
328 return 0;
329 }
330
331 static struct irq_chip sa1111_low_chip = {
332 .name = "SA1111-l",
333 .irq_ack = sa1111_ack_irq,
334 .irq_mask = sa1111_mask_lowirq,
335 .irq_unmask = sa1111_unmask_lowirq,
336 .irq_retrigger = sa1111_retrigger_lowirq,
337 .irq_set_type = sa1111_type_lowirq,
338 .irq_set_wake = sa1111_wake_lowirq,
339 };
340
sa1111_mask_highirq(struct irq_data * d)341 static void sa1111_mask_highirq(struct irq_data *d)
342 {
343 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
344 void __iomem *mapbase = sachip->base + SA1111_INTC;
345 unsigned long ie1;
346
347 ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
348 ie1 &= ~SA1111_IRQMASK_HI(d->irq);
349 sa1111_writel(ie1, mapbase + SA1111_INTEN1);
350 }
351
sa1111_unmask_highirq(struct irq_data * d)352 static void sa1111_unmask_highirq(struct irq_data *d)
353 {
354 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
355 void __iomem *mapbase = sachip->base + SA1111_INTC;
356 unsigned long ie1;
357
358 ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
359 ie1 |= SA1111_IRQMASK_HI(d->irq);
360 sa1111_writel(ie1, mapbase + SA1111_INTEN1);
361 }
362
363 /*
364 * Attempt to re-trigger the interrupt. The SA1111 contains a register
365 * (INTSET) which claims to do this. However, in practice no amount of
366 * manipulation of INTEN and INTSET guarantees that the interrupt will
367 * be triggered. In fact, its very difficult, if not impossible to get
368 * INTSET to re-trigger the interrupt.
369 */
sa1111_retrigger_highirq(struct irq_data * d)370 static int sa1111_retrigger_highirq(struct irq_data *d)
371 {
372 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
373 void __iomem *mapbase = sachip->base + SA1111_INTC;
374 unsigned int mask = SA1111_IRQMASK_HI(d->irq);
375 unsigned long ip1;
376 int i;
377
378 ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
379 for (i = 0; i < 8; i++) {
380 sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1);
381 sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
382 if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask)
383 break;
384 }
385
386 if (i == 8)
387 pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
388 d->irq);
389 return i == 8 ? -1 : 0;
390 }
391
sa1111_type_highirq(struct irq_data * d,unsigned int flags)392 static int sa1111_type_highirq(struct irq_data *d, unsigned int flags)
393 {
394 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
395 void __iomem *mapbase = sachip->base + SA1111_INTC;
396 unsigned int mask = SA1111_IRQMASK_HI(d->irq);
397 unsigned long ip1;
398
399 if (flags == IRQ_TYPE_PROBE)
400 return 0;
401
402 if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
403 return -EINVAL;
404
405 ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
406 if (flags & IRQ_TYPE_EDGE_RISING)
407 ip1 &= ~mask;
408 else
409 ip1 |= mask;
410 sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
411 sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1);
412
413 return 0;
414 }
415
sa1111_wake_highirq(struct irq_data * d,unsigned int on)416 static int sa1111_wake_highirq(struct irq_data *d, unsigned int on)
417 {
418 struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
419 void __iomem *mapbase = sachip->base + SA1111_INTC;
420 unsigned int mask = SA1111_IRQMASK_HI(d->irq);
421 unsigned long we1;
422
423 we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
424 if (on)
425 we1 |= mask;
426 else
427 we1 &= ~mask;
428 sa1111_writel(we1, mapbase + SA1111_WAKEEN1);
429
430 return 0;
431 }
432
433 static struct irq_chip sa1111_high_chip = {
434 .name = "SA1111-h",
435 .irq_ack = sa1111_ack_irq,
436 .irq_mask = sa1111_mask_highirq,
437 .irq_unmask = sa1111_unmask_highirq,
438 .irq_retrigger = sa1111_retrigger_highirq,
439 .irq_set_type = sa1111_type_highirq,
440 .irq_set_wake = sa1111_wake_highirq,
441 };
442
sa1111_setup_irq(struct sa1111 * sachip,unsigned irq_base)443 static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
444 {
445 void __iomem *irqbase = sachip->base + SA1111_INTC;
446 unsigned i, irq;
447 int ret;
448
449 /*
450 * We're guaranteed that this region hasn't been taken.
451 */
452 request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
453
454 ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
455 if (ret <= 0) {
456 dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
457 SA1111_IRQ_NR, ret);
458 if (ret == 0)
459 ret = -EINVAL;
460 return ret;
461 }
462
463 sachip->irq_base = ret;
464
465 /* disable all IRQs */
466 sa1111_writel(0, irqbase + SA1111_INTEN0);
467 sa1111_writel(0, irqbase + SA1111_INTEN1);
468 sa1111_writel(0, irqbase + SA1111_WAKEEN0);
469 sa1111_writel(0, irqbase + SA1111_WAKEEN1);
470
471 /*
472 * detect on rising edge. Note: Feb 2001 Errata for SA1111
473 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
474 */
475 sa1111_writel(0, irqbase + SA1111_INTPOL0);
476 sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
477 SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
478 irqbase + SA1111_INTPOL1);
479
480 /* clear all IRQs */
481 sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
482 sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
483
484 for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
485 irq = sachip->irq_base + i;
486 irq_set_chip_and_handler(irq, &sa1111_low_chip,
487 handle_edge_irq);
488 irq_set_chip_data(irq, sachip);
489 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
490 }
491
492 for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
493 irq = sachip->irq_base + i;
494 irq_set_chip_and_handler(irq, &sa1111_high_chip,
495 handle_edge_irq);
496 irq_set_chip_data(irq, sachip);
497 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
498 }
499
500 /*
501 * Register SA1111 interrupt
502 */
503 irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
504 irq_set_handler_data(sachip->irq, sachip);
505 irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
506
507 dev_info(sachip->dev, "Providing IRQ%u-%u\n",
508 sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
509
510 return 0;
511 }
512
513 /*
514 * Bring the SA1111 out of reset. This requires a set procedure:
515 * 1. nRESET asserted (by hardware)
516 * 2. CLK turned on from SA1110
517 * 3. nRESET deasserted
518 * 4. VCO turned on, PLL_BYPASS turned off
519 * 5. Wait lock time, then assert RCLKEn
520 * 7. PCR set to allow clocking of individual functions
521 *
522 * Until we've done this, the only registers we can access are:
523 * SBI_SKCR
524 * SBI_SMCR
525 * SBI_SKID
526 */
sa1111_wake(struct sa1111 * sachip)527 static void sa1111_wake(struct sa1111 *sachip)
528 {
529 unsigned long flags, r;
530
531 spin_lock_irqsave(&sachip->lock, flags);
532
533 clk_enable(sachip->clk);
534
535 /*
536 * Turn VCO on, and disable PLL Bypass.
537 */
538 r = sa1111_readl(sachip->base + SA1111_SKCR);
539 r &= ~SKCR_VCO_OFF;
540 sa1111_writel(r, sachip->base + SA1111_SKCR);
541 r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
542 sa1111_writel(r, sachip->base + SA1111_SKCR);
543
544 /*
545 * Wait lock time. SA1111 manual _doesn't_
546 * specify a figure for this! We choose 100us.
547 */
548 udelay(100);
549
550 /*
551 * Enable RCLK. We also ensure that RDYEN is set.
552 */
553 r |= SKCR_RCLKEN | SKCR_RDYEN;
554 sa1111_writel(r, sachip->base + SA1111_SKCR);
555
556 /*
557 * Wait 14 RCLK cycles for the chip to finish coming out
558 * of reset. (RCLK=24MHz). This is 590ns.
559 */
560 udelay(1);
561
562 /*
563 * Ensure all clocks are initially off.
564 */
565 sa1111_writel(0, sachip->base + SA1111_SKPCR);
566
567 spin_unlock_irqrestore(&sachip->lock, flags);
568 }
569
570 #ifdef CONFIG_ARCH_SA1100
571
572 static u32 sa1111_dma_mask[] = {
573 ~0,
574 ~(1 << 20),
575 ~(1 << 23),
576 ~(1 << 24),
577 ~(1 << 25),
578 ~(1 << 20),
579 ~(1 << 20),
580 0,
581 };
582
583 /*
584 * Configure the SA1111 shared memory controller.
585 */
586 void
sa1111_configure_smc(struct sa1111 * sachip,int sdram,unsigned int drac,unsigned int cas_latency)587 sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
588 unsigned int cas_latency)
589 {
590 unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
591
592 if (cas_latency == 3)
593 smcr |= SMCR_CLAT;
594
595 sa1111_writel(smcr, sachip->base + SA1111_SMCR);
596
597 /*
598 * Now clear the bits in the DMA mask to work around the SA1111
599 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
600 * Chip Specification Update, June 2000, Erratum #7).
601 */
602 if (sachip->dev->dma_mask)
603 *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
604
605 sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
606 }
607 #endif
608
sa1111_dev_release(struct device * _dev)609 static void sa1111_dev_release(struct device *_dev)
610 {
611 struct sa1111_dev *dev = SA1111_DEV(_dev);
612
613 kfree(dev);
614 }
615
616 static int
sa1111_init_one_child(struct sa1111 * sachip,struct resource * parent,struct sa1111_dev_info * info)617 sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
618 struct sa1111_dev_info *info)
619 {
620 struct sa1111_dev *dev;
621 unsigned i;
622 int ret;
623
624 dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
625 if (!dev) {
626 ret = -ENOMEM;
627 goto err_alloc;
628 }
629
630 device_initialize(&dev->dev);
631 dev_set_name(&dev->dev, "%4.4lx", info->offset);
632 dev->devid = info->devid;
633 dev->dev.parent = sachip->dev;
634 dev->dev.bus = &sa1111_bus_type;
635 dev->dev.release = sa1111_dev_release;
636 dev->res.start = sachip->phys + info->offset;
637 dev->res.end = dev->res.start + 511;
638 dev->res.name = dev_name(&dev->dev);
639 dev->res.flags = IORESOURCE_MEM;
640 dev->mapbase = sachip->base + info->offset;
641 dev->skpcr_mask = info->skpcr_mask;
642
643 for (i = 0; i < ARRAY_SIZE(info->irq); i++)
644 dev->irq[i] = sachip->irq_base + info->irq[i];
645
646 /*
647 * If the parent device has a DMA mask associated with it, and
648 * this child supports DMA, propagate it down to the children.
649 */
650 if (info->dma && sachip->dev->dma_mask) {
651 dev->dma_mask = *sachip->dev->dma_mask;
652 dev->dev.dma_mask = &dev->dma_mask;
653 dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
654 }
655
656 ret = request_resource(parent, &dev->res);
657 if (ret) {
658 dev_err(sachip->dev, "failed to allocate resource for %s\n",
659 dev->res.name);
660 goto err_resource;
661 }
662
663 ret = device_add(&dev->dev);
664 if (ret)
665 goto err_add;
666 return 0;
667
668 err_add:
669 release_resource(&dev->res);
670 err_resource:
671 put_device(&dev->dev);
672 err_alloc:
673 return ret;
674 }
675
676 /**
677 * sa1111_probe - probe for a single SA1111 chip.
678 * @phys_addr: physical address of device.
679 *
680 * Probe for a SA1111 chip. This must be called
681 * before any other SA1111-specific code.
682 *
683 * Returns:
684 * %-ENODEV device not found.
685 * %-EBUSY physical address already marked in-use.
686 * %-EINVAL no platform data passed
687 * %0 successful.
688 */
__sa1111_probe(struct device * me,struct resource * mem,int irq)689 static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
690 {
691 struct sa1111_platform_data *pd = me->platform_data;
692 struct sa1111 *sachip;
693 unsigned long id;
694 unsigned int has_devs;
695 int i, ret = -ENODEV;
696
697 if (!pd)
698 return -EINVAL;
699
700 sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
701 if (!sachip)
702 return -ENOMEM;
703
704 sachip->clk = clk_get(me, "SA1111_CLK");
705 if (IS_ERR(sachip->clk)) {
706 ret = PTR_ERR(sachip->clk);
707 goto err_free;
708 }
709
710 ret = clk_prepare(sachip->clk);
711 if (ret)
712 goto err_clkput;
713
714 spin_lock_init(&sachip->lock);
715
716 sachip->dev = me;
717 dev_set_drvdata(sachip->dev, sachip);
718
719 sachip->pdata = pd;
720 sachip->phys = mem->start;
721 sachip->irq = irq;
722
723 /*
724 * Map the whole region. This also maps the
725 * registers for our children.
726 */
727 sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
728 if (!sachip->base) {
729 ret = -ENOMEM;
730 goto err_clk_unprep;
731 }
732
733 /*
734 * Probe for the chip. Only touch the SBI registers.
735 */
736 id = sa1111_readl(sachip->base + SA1111_SKID);
737 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
738 printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
739 ret = -ENODEV;
740 goto err_unmap;
741 }
742
743 pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
744 (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
745
746 /*
747 * We found it. Wake the chip up, and initialise.
748 */
749 sa1111_wake(sachip);
750
751 /*
752 * The interrupt controller must be initialised before any
753 * other device to ensure that the interrupts are available.
754 */
755 if (sachip->irq != NO_IRQ) {
756 ret = sa1111_setup_irq(sachip, pd->irq_base);
757 if (ret)
758 goto err_unmap;
759 }
760
761 #ifdef CONFIG_ARCH_SA1100
762 {
763 unsigned int val;
764
765 /*
766 * The SDRAM configuration of the SA1110 and the SA1111 must
767 * match. This is very important to ensure that SA1111 accesses
768 * don't corrupt the SDRAM. Note that this ungates the SA1111's
769 * MBGNT signal, so we must have called sa1110_mb_disable()
770 * beforehand.
771 */
772 sa1111_configure_smc(sachip, 1,
773 FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
774 FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
775
776 /*
777 * We only need to turn on DCLK whenever we want to use the
778 * DMA. It can otherwise be held firmly in the off position.
779 * (currently, we always enable it.)
780 */
781 val = sa1111_readl(sachip->base + SA1111_SKPCR);
782 sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
783
784 /*
785 * Enable the SA1110 memory bus request and grant signals.
786 */
787 sa1110_mb_enable();
788 }
789 #endif
790
791 g_sa1111 = sachip;
792
793 has_devs = ~0;
794 if (pd)
795 has_devs &= ~pd->disable_devs;
796
797 for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
798 if (sa1111_devices[i].devid & has_devs)
799 sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
800
801 return 0;
802
803 err_unmap:
804 iounmap(sachip->base);
805 err_clk_unprep:
806 clk_unprepare(sachip->clk);
807 err_clkput:
808 clk_put(sachip->clk);
809 err_free:
810 kfree(sachip);
811 return ret;
812 }
813
sa1111_remove_one(struct device * dev,void * data)814 static int sa1111_remove_one(struct device *dev, void *data)
815 {
816 struct sa1111_dev *sadev = SA1111_DEV(dev);
817 device_del(&sadev->dev);
818 release_resource(&sadev->res);
819 put_device(&sadev->dev);
820 return 0;
821 }
822
__sa1111_remove(struct sa1111 * sachip)823 static void __sa1111_remove(struct sa1111 *sachip)
824 {
825 void __iomem *irqbase = sachip->base + SA1111_INTC;
826
827 device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
828
829 /* disable all IRQs */
830 sa1111_writel(0, irqbase + SA1111_INTEN0);
831 sa1111_writel(0, irqbase + SA1111_INTEN1);
832 sa1111_writel(0, irqbase + SA1111_WAKEEN0);
833 sa1111_writel(0, irqbase + SA1111_WAKEEN1);
834
835 clk_disable(sachip->clk);
836 clk_unprepare(sachip->clk);
837
838 if (sachip->irq != NO_IRQ) {
839 irq_set_chained_handler(sachip->irq, NULL);
840 irq_set_handler_data(sachip->irq, NULL);
841 irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
842
843 release_mem_region(sachip->phys + SA1111_INTC, 512);
844 }
845
846 iounmap(sachip->base);
847 clk_put(sachip->clk);
848 kfree(sachip);
849 }
850
851 struct sa1111_save_data {
852 unsigned int skcr;
853 unsigned int skpcr;
854 unsigned int skcdr;
855 unsigned char skaud;
856 unsigned char skpwm0;
857 unsigned char skpwm1;
858
859 /*
860 * Interrupt controller
861 */
862 unsigned int intpol0;
863 unsigned int intpol1;
864 unsigned int inten0;
865 unsigned int inten1;
866 unsigned int wakepol0;
867 unsigned int wakepol1;
868 unsigned int wakeen0;
869 unsigned int wakeen1;
870 };
871
872 #ifdef CONFIG_PM
873
sa1111_suspend(struct platform_device * dev,pm_message_t state)874 static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
875 {
876 struct sa1111 *sachip = platform_get_drvdata(dev);
877 struct sa1111_save_data *save;
878 unsigned long flags;
879 unsigned int val;
880 void __iomem *base;
881
882 save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
883 if (!save)
884 return -ENOMEM;
885 sachip->saved_state = save;
886
887 spin_lock_irqsave(&sachip->lock, flags);
888
889 /*
890 * Save state.
891 */
892 base = sachip->base;
893 save->skcr = sa1111_readl(base + SA1111_SKCR);
894 save->skpcr = sa1111_readl(base + SA1111_SKPCR);
895 save->skcdr = sa1111_readl(base + SA1111_SKCDR);
896 save->skaud = sa1111_readl(base + SA1111_SKAUD);
897 save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0);
898 save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1);
899
900 sa1111_writel(0, sachip->base + SA1111_SKPWM0);
901 sa1111_writel(0, sachip->base + SA1111_SKPWM1);
902
903 base = sachip->base + SA1111_INTC;
904 save->intpol0 = sa1111_readl(base + SA1111_INTPOL0);
905 save->intpol1 = sa1111_readl(base + SA1111_INTPOL1);
906 save->inten0 = sa1111_readl(base + SA1111_INTEN0);
907 save->inten1 = sa1111_readl(base + SA1111_INTEN1);
908 save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0);
909 save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1);
910 save->wakeen0 = sa1111_readl(base + SA1111_WAKEEN0);
911 save->wakeen1 = sa1111_readl(base + SA1111_WAKEEN1);
912
913 /*
914 * Disable.
915 */
916 val = sa1111_readl(sachip->base + SA1111_SKCR);
917 sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
918
919 clk_disable(sachip->clk);
920
921 spin_unlock_irqrestore(&sachip->lock, flags);
922
923 #ifdef CONFIG_ARCH_SA1100
924 sa1110_mb_disable();
925 #endif
926
927 return 0;
928 }
929
930 /*
931 * sa1111_resume - Restore the SA1111 device state.
932 * @dev: device to restore
933 *
934 * Restore the general state of the SA1111; clock control and
935 * interrupt controller. Other parts of the SA1111 must be
936 * restored by their respective drivers, and must be called
937 * via LDM after this function.
938 */
sa1111_resume(struct platform_device * dev)939 static int sa1111_resume(struct platform_device *dev)
940 {
941 struct sa1111 *sachip = platform_get_drvdata(dev);
942 struct sa1111_save_data *save;
943 unsigned long flags, id;
944 void __iomem *base;
945
946 save = sachip->saved_state;
947 if (!save)
948 return 0;
949
950 /*
951 * Ensure that the SA1111 is still here.
952 * FIXME: shouldn't do this here.
953 */
954 id = sa1111_readl(sachip->base + SA1111_SKID);
955 if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
956 __sa1111_remove(sachip);
957 platform_set_drvdata(dev, NULL);
958 kfree(save);
959 return 0;
960 }
961
962 /*
963 * First of all, wake up the chip.
964 */
965 sa1111_wake(sachip);
966
967 #ifdef CONFIG_ARCH_SA1100
968 /* Enable the memory bus request/grant signals */
969 sa1110_mb_enable();
970 #endif
971
972 /*
973 * Only lock for write ops. Also, sa1111_wake must be called with
974 * released spinlock!
975 */
976 spin_lock_irqsave(&sachip->lock, flags);
977
978 sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
979 sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
980
981 base = sachip->base;
982 sa1111_writel(save->skcr, base + SA1111_SKCR);
983 sa1111_writel(save->skpcr, base + SA1111_SKPCR);
984 sa1111_writel(save->skcdr, base + SA1111_SKCDR);
985 sa1111_writel(save->skaud, base + SA1111_SKAUD);
986 sa1111_writel(save->skpwm0, base + SA1111_SKPWM0);
987 sa1111_writel(save->skpwm1, base + SA1111_SKPWM1);
988
989 base = sachip->base + SA1111_INTC;
990 sa1111_writel(save->intpol0, base + SA1111_INTPOL0);
991 sa1111_writel(save->intpol1, base + SA1111_INTPOL1);
992 sa1111_writel(save->inten0, base + SA1111_INTEN0);
993 sa1111_writel(save->inten1, base + SA1111_INTEN1);
994 sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0);
995 sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1);
996 sa1111_writel(save->wakeen0, base + SA1111_WAKEEN0);
997 sa1111_writel(save->wakeen1, base + SA1111_WAKEEN1);
998
999 spin_unlock_irqrestore(&sachip->lock, flags);
1000
1001 sachip->saved_state = NULL;
1002 kfree(save);
1003
1004 return 0;
1005 }
1006
1007 #else
1008 #define sa1111_suspend NULL
1009 #define sa1111_resume NULL
1010 #endif
1011
sa1111_probe(struct platform_device * pdev)1012 static int sa1111_probe(struct platform_device *pdev)
1013 {
1014 struct resource *mem;
1015 int irq;
1016
1017 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1018 if (!mem)
1019 return -EINVAL;
1020 irq = platform_get_irq(pdev, 0);
1021 if (irq < 0)
1022 return -ENXIO;
1023
1024 return __sa1111_probe(&pdev->dev, mem, irq);
1025 }
1026
sa1111_remove(struct platform_device * pdev)1027 static int sa1111_remove(struct platform_device *pdev)
1028 {
1029 struct sa1111 *sachip = platform_get_drvdata(pdev);
1030
1031 if (sachip) {
1032 #ifdef CONFIG_PM
1033 kfree(sachip->saved_state);
1034 sachip->saved_state = NULL;
1035 #endif
1036 __sa1111_remove(sachip);
1037 platform_set_drvdata(pdev, NULL);
1038 }
1039
1040 return 0;
1041 }
1042
1043 /*
1044 * Not sure if this should be on the system bus or not yet.
1045 * We really want some way to register a system device at
1046 * the per-machine level, and then have this driver pick
1047 * up the registered devices.
1048 *
1049 * We also need to handle the SDRAM configuration for
1050 * PXA250/SA1110 machine classes.
1051 */
1052 static struct platform_driver sa1111_device_driver = {
1053 .probe = sa1111_probe,
1054 .remove = sa1111_remove,
1055 .suspend = sa1111_suspend,
1056 .resume = sa1111_resume,
1057 .driver = {
1058 .name = "sa1111",
1059 },
1060 };
1061
1062 /*
1063 * Get the parent device driver (us) structure
1064 * from a child function device
1065 */
sa1111_chip_driver(struct sa1111_dev * sadev)1066 static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1067 {
1068 return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1069 }
1070
1071 /*
1072 * The bits in the opdiv field are non-linear.
1073 */
1074 static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1075
__sa1111_pll_clock(struct sa1111 * sachip)1076 static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1077 {
1078 unsigned int skcdr, fbdiv, ipdiv, opdiv;
1079
1080 skcdr = sa1111_readl(sachip->base + SA1111_SKCDR);
1081
1082 fbdiv = (skcdr & 0x007f) + 2;
1083 ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1084 opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1085
1086 return 3686400 * fbdiv / (ipdiv * opdiv);
1087 }
1088
1089 /**
1090 * sa1111_pll_clock - return the current PLL clock frequency.
1091 * @sadev: SA1111 function block
1092 *
1093 * BUG: we should look at SKCR. We also blindly believe that
1094 * the chip is being fed with the 3.6864MHz clock.
1095 *
1096 * Returns the PLL clock in Hz.
1097 */
sa1111_pll_clock(struct sa1111_dev * sadev)1098 unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1099 {
1100 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1101
1102 return __sa1111_pll_clock(sachip);
1103 }
1104 EXPORT_SYMBOL(sa1111_pll_clock);
1105
1106 /**
1107 * sa1111_select_audio_mode - select I2S or AC link mode
1108 * @sadev: SA1111 function block
1109 * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1110 *
1111 * Frob the SKCR to select AC Link mode or I2S mode for
1112 * the audio block.
1113 */
sa1111_select_audio_mode(struct sa1111_dev * sadev,int mode)1114 void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1115 {
1116 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1117 unsigned long flags;
1118 unsigned int val;
1119
1120 spin_lock_irqsave(&sachip->lock, flags);
1121
1122 val = sa1111_readl(sachip->base + SA1111_SKCR);
1123 if (mode == SA1111_AUDIO_I2S) {
1124 val &= ~SKCR_SELAC;
1125 } else {
1126 val |= SKCR_SELAC;
1127 }
1128 sa1111_writel(val, sachip->base + SA1111_SKCR);
1129
1130 spin_unlock_irqrestore(&sachip->lock, flags);
1131 }
1132 EXPORT_SYMBOL(sa1111_select_audio_mode);
1133
1134 /**
1135 * sa1111_set_audio_rate - set the audio sample rate
1136 * @sadev: SA1111 SAC function block
1137 * @rate: sample rate to select
1138 */
sa1111_set_audio_rate(struct sa1111_dev * sadev,int rate)1139 int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1140 {
1141 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1142 unsigned int div;
1143
1144 if (sadev->devid != SA1111_DEVID_SAC)
1145 return -EINVAL;
1146
1147 div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1148 if (div == 0)
1149 div = 1;
1150 if (div > 128)
1151 div = 128;
1152
1153 sa1111_writel(div - 1, sachip->base + SA1111_SKAUD);
1154
1155 return 0;
1156 }
1157 EXPORT_SYMBOL(sa1111_set_audio_rate);
1158
1159 /**
1160 * sa1111_get_audio_rate - get the audio sample rate
1161 * @sadev: SA1111 SAC function block device
1162 */
sa1111_get_audio_rate(struct sa1111_dev * sadev)1163 int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1164 {
1165 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1166 unsigned long div;
1167
1168 if (sadev->devid != SA1111_DEVID_SAC)
1169 return -EINVAL;
1170
1171 div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1;
1172
1173 return __sa1111_pll_clock(sachip) / (256 * div);
1174 }
1175 EXPORT_SYMBOL(sa1111_get_audio_rate);
1176
sa1111_set_io_dir(struct sa1111_dev * sadev,unsigned int bits,unsigned int dir,unsigned int sleep_dir)1177 void sa1111_set_io_dir(struct sa1111_dev *sadev,
1178 unsigned int bits, unsigned int dir,
1179 unsigned int sleep_dir)
1180 {
1181 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1182 unsigned long flags;
1183 unsigned int val;
1184 void __iomem *gpio = sachip->base + SA1111_GPIO;
1185
1186 #define MODIFY_BITS(port, mask, dir) \
1187 if (mask) { \
1188 val = sa1111_readl(port); \
1189 val &= ~(mask); \
1190 val |= (dir) & (mask); \
1191 sa1111_writel(val, port); \
1192 }
1193
1194 spin_lock_irqsave(&sachip->lock, flags);
1195 MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir);
1196 MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8);
1197 MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16);
1198
1199 MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir);
1200 MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8);
1201 MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
1202 spin_unlock_irqrestore(&sachip->lock, flags);
1203 }
1204 EXPORT_SYMBOL(sa1111_set_io_dir);
1205
sa1111_set_io(struct sa1111_dev * sadev,unsigned int bits,unsigned int v)1206 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
1207 {
1208 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1209 unsigned long flags;
1210 unsigned int val;
1211 void __iomem *gpio = sachip->base + SA1111_GPIO;
1212
1213 spin_lock_irqsave(&sachip->lock, flags);
1214 MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v);
1215 MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8);
1216 MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
1217 spin_unlock_irqrestore(&sachip->lock, flags);
1218 }
1219 EXPORT_SYMBOL(sa1111_set_io);
1220
sa1111_set_sleep_io(struct sa1111_dev * sadev,unsigned int bits,unsigned int v)1221 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
1222 {
1223 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1224 unsigned long flags;
1225 unsigned int val;
1226 void __iomem *gpio = sachip->base + SA1111_GPIO;
1227
1228 spin_lock_irqsave(&sachip->lock, flags);
1229 MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v);
1230 MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8);
1231 MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
1232 spin_unlock_irqrestore(&sachip->lock, flags);
1233 }
1234 EXPORT_SYMBOL(sa1111_set_sleep_io);
1235
1236 /*
1237 * Individual device operations.
1238 */
1239
1240 /**
1241 * sa1111_enable_device - enable an on-chip SA1111 function block
1242 * @sadev: SA1111 function block device to enable
1243 */
sa1111_enable_device(struct sa1111_dev * sadev)1244 int sa1111_enable_device(struct sa1111_dev *sadev)
1245 {
1246 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1247 unsigned long flags;
1248 unsigned int val;
1249 int ret = 0;
1250
1251 if (sachip->pdata && sachip->pdata->enable)
1252 ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1253
1254 if (ret == 0) {
1255 spin_lock_irqsave(&sachip->lock, flags);
1256 val = sa1111_readl(sachip->base + SA1111_SKPCR);
1257 sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1258 spin_unlock_irqrestore(&sachip->lock, flags);
1259 }
1260 return ret;
1261 }
1262 EXPORT_SYMBOL(sa1111_enable_device);
1263
1264 /**
1265 * sa1111_disable_device - disable an on-chip SA1111 function block
1266 * @sadev: SA1111 function block device to disable
1267 */
sa1111_disable_device(struct sa1111_dev * sadev)1268 void sa1111_disable_device(struct sa1111_dev *sadev)
1269 {
1270 struct sa1111 *sachip = sa1111_chip_driver(sadev);
1271 unsigned long flags;
1272 unsigned int val;
1273
1274 spin_lock_irqsave(&sachip->lock, flags);
1275 val = sa1111_readl(sachip->base + SA1111_SKPCR);
1276 sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1277 spin_unlock_irqrestore(&sachip->lock, flags);
1278
1279 if (sachip->pdata && sachip->pdata->disable)
1280 sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1281 }
1282 EXPORT_SYMBOL(sa1111_disable_device);
1283
1284 /*
1285 * SA1111 "Register Access Bus."
1286 *
1287 * We model this as a regular bus type, and hang devices directly
1288 * off this.
1289 */
sa1111_match(struct device * _dev,struct device_driver * _drv)1290 static int sa1111_match(struct device *_dev, struct device_driver *_drv)
1291 {
1292 struct sa1111_dev *dev = SA1111_DEV(_dev);
1293 struct sa1111_driver *drv = SA1111_DRV(_drv);
1294
1295 return dev->devid & drv->devid;
1296 }
1297
sa1111_bus_suspend(struct device * dev,pm_message_t state)1298 static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
1299 {
1300 struct sa1111_dev *sadev = SA1111_DEV(dev);
1301 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1302 int ret = 0;
1303
1304 if (drv && drv->suspend)
1305 ret = drv->suspend(sadev, state);
1306 return ret;
1307 }
1308
sa1111_bus_resume(struct device * dev)1309 static int sa1111_bus_resume(struct device *dev)
1310 {
1311 struct sa1111_dev *sadev = SA1111_DEV(dev);
1312 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1313 int ret = 0;
1314
1315 if (drv && drv->resume)
1316 ret = drv->resume(sadev);
1317 return ret;
1318 }
1319
sa1111_bus_shutdown(struct device * dev)1320 static void sa1111_bus_shutdown(struct device *dev)
1321 {
1322 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1323
1324 if (drv && drv->shutdown)
1325 drv->shutdown(SA1111_DEV(dev));
1326 }
1327
sa1111_bus_probe(struct device * dev)1328 static int sa1111_bus_probe(struct device *dev)
1329 {
1330 struct sa1111_dev *sadev = SA1111_DEV(dev);
1331 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1332 int ret = -ENODEV;
1333
1334 if (drv->probe)
1335 ret = drv->probe(sadev);
1336 return ret;
1337 }
1338
sa1111_bus_remove(struct device * dev)1339 static int sa1111_bus_remove(struct device *dev)
1340 {
1341 struct sa1111_dev *sadev = SA1111_DEV(dev);
1342 struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1343 int ret = 0;
1344
1345 if (drv->remove)
1346 ret = drv->remove(sadev);
1347 return ret;
1348 }
1349
1350 struct bus_type sa1111_bus_type = {
1351 .name = "sa1111-rab",
1352 .match = sa1111_match,
1353 .probe = sa1111_bus_probe,
1354 .remove = sa1111_bus_remove,
1355 .suspend = sa1111_bus_suspend,
1356 .resume = sa1111_bus_resume,
1357 .shutdown = sa1111_bus_shutdown,
1358 };
1359 EXPORT_SYMBOL(sa1111_bus_type);
1360
sa1111_driver_register(struct sa1111_driver * driver)1361 int sa1111_driver_register(struct sa1111_driver *driver)
1362 {
1363 driver->drv.bus = &sa1111_bus_type;
1364 return driver_register(&driver->drv);
1365 }
1366 EXPORT_SYMBOL(sa1111_driver_register);
1367
sa1111_driver_unregister(struct sa1111_driver * driver)1368 void sa1111_driver_unregister(struct sa1111_driver *driver)
1369 {
1370 driver_unregister(&driver->drv);
1371 }
1372 EXPORT_SYMBOL(sa1111_driver_unregister);
1373
1374 #ifdef CONFIG_DMABOUNCE
1375 /*
1376 * According to the "Intel StrongARM SA-1111 Microprocessor Companion
1377 * Chip Specification Update" (June 2000), erratum #7, there is a
1378 * significant bug in the SA1111 SDRAM shared memory controller. If
1379 * an access to a region of memory above 1MB relative to the bank base,
1380 * it is important that address bit 10 _NOT_ be asserted. Depending
1381 * on the configuration of the RAM, bit 10 may correspond to one
1382 * of several different (processor-relative) address bits.
1383 *
1384 * This routine only identifies whether or not a given DMA address
1385 * is susceptible to the bug.
1386 *
1387 * This should only get called for sa1111_device types due to the
1388 * way we configure our device dma_masks.
1389 */
sa1111_needs_bounce(struct device * dev,dma_addr_t addr,size_t size)1390 static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
1391 {
1392 /*
1393 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
1394 * User's Guide" mentions that jumpers R51 and R52 control the
1395 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
1396 * SDRAM bank 1 on Neponset). The default configuration selects
1397 * Assabet, so any address in bank 1 is necessarily invalid.
1398 */
1399 return (machine_is_assabet() || machine_is_pfs168()) &&
1400 (addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
1401 }
1402
sa1111_notifier_call(struct notifier_block * n,unsigned long action,void * data)1403 static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
1404 void *data)
1405 {
1406 struct sa1111_dev *dev = SA1111_DEV(data);
1407
1408 switch (action) {
1409 case BUS_NOTIFY_ADD_DEVICE:
1410 if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
1411 int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
1412 sa1111_needs_bounce);
1413 if (ret)
1414 dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
1415 }
1416 break;
1417
1418 case BUS_NOTIFY_DEL_DEVICE:
1419 if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
1420 dmabounce_unregister_dev(&dev->dev);
1421 break;
1422 }
1423 return NOTIFY_OK;
1424 }
1425
1426 static struct notifier_block sa1111_bus_notifier = {
1427 .notifier_call = sa1111_notifier_call,
1428 };
1429 #endif
1430
sa1111_init(void)1431 static int __init sa1111_init(void)
1432 {
1433 int ret = bus_register(&sa1111_bus_type);
1434 #ifdef CONFIG_DMABOUNCE
1435 if (ret == 0)
1436 bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1437 #endif
1438 if (ret == 0)
1439 platform_driver_register(&sa1111_device_driver);
1440 return ret;
1441 }
1442
sa1111_exit(void)1443 static void __exit sa1111_exit(void)
1444 {
1445 platform_driver_unregister(&sa1111_device_driver);
1446 #ifdef CONFIG_DMABOUNCE
1447 bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1448 #endif
1449 bus_unregister(&sa1111_bus_type);
1450 }
1451
1452 subsys_initcall(sa1111_init);
1453 module_exit(sa1111_exit);
1454
1455 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1456 MODULE_LICENSE("GPL");
1457