1 /*
2  * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
3  * remains copyright by the original authors
4  *
5  * Portions of the merged code are based on Host AP (software wireless
6  * LAN access point) driver for Intersil Prism2/2.5/3.
7  *
8  * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
9  * <jkmaline@cc.hut.fi>
10  * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
11  *
12  * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13  * <jketreno@linux.intel.com>
14  * Copyright (c) 2004, Intel Corporation
15  *
16  * Modified for Realtek's wi-fi cards by Andrea Merello
17  * <andrea.merello@gmail.com>
18  *
19  * This program is free software; you can redistribute it and/or modify
20  * it under the terms of the GNU General Public License version 2 as
21  * published by the Free Software Foundation. See README and COPYING for
22  * more details.
23  */
24 #ifndef IEEE80211_H
25 #define IEEE80211_H
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h>   /* ARRAY_SIZE */
28 #include <linux/module.h>
29 #include <linux/jiffies.h>
30 #include <linux/timer.h>
31 #include <linux/sched.h>
32 #include <linux/semaphore.h>
33 #include <linux/interrupt.h>
34 
35 #include <linux/delay.h>
36 #include <linux/wireless.h>
37 
38 #include "rtl819x_HT.h"
39 #include "rtl819x_BA.h"
40 #include "rtl819x_TS.h"
41 
42 
43 #ifndef IW_MODE_MONITOR
44 #define IW_MODE_MONITOR 6
45 #endif
46 
47 #ifndef IWEVCUSTOM
48 #define IWEVCUSTOM 0x8c02
49 #endif
50 
51 
52 #ifndef container_of
53 /**
54  * container_of - cast a member of a structure out to the containing structure
55  *
56  * @ptr:        the pointer to the member.
57  * @type:       the type of the container struct this is embedded in.
58  * @member:     the name of the member within the struct.
59  *
60  */
61 #define container_of(ptr, type, member) ({                      \
62 	const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
63 	(type *)( (char *)__mptr - offsetof(type,member) );})
64 #endif
65 
66 #define KEY_TYPE_NA		0x0
67 #define KEY_TYPE_WEP40		0x1
68 #define KEY_TYPE_TKIP		0x2
69 #define KEY_TYPE_CCMP		0x4
70 #define KEY_TYPE_WEP104		0x5
71 
72 /* added for rtl819x tx procedure */
73 #define MAX_QUEUE_SIZE		0x10
74 
75 //
76 // 8190 queue mapping
77 //
78 #define BK_QUEUE                               0
79 #define BE_QUEUE                               1
80 #define VI_QUEUE                               2
81 #define VO_QUEUE                               3
82 #define HCCA_QUEUE                             4
83 #define TXCMD_QUEUE                            5
84 #define MGNT_QUEUE                             6
85 #define HIGH_QUEUE                             7
86 #define BEACON_QUEUE                           8
87 
88 #define LOW_QUEUE                              BE_QUEUE
89 #define NORMAL_QUEUE                           MGNT_QUEUE
90 
91 //added by amy for ps
92 #define SWRF_TIMEOUT				50
93 
94 //added by amy for LEAP related
95 #define IE_CISCO_FLAG_POSITION		0x08	// Flag byte: byte 8, numbered from 0.
96 #define SUPPORT_CKIP_MIC			0x08	// bit3
97 #define SUPPORT_CKIP_PK			0x10	// bit4
98 /* defined for skb cb field */
99 /* At most 28 byte */
100 typedef struct cb_desc {
101 	/* Tx Desc Related flags (8-9) */
102 	u8 bLastIniPkt:1;
103 	u8 bCmdOrInit:1;
104 	u8 bFirstSeg:1;
105 	u8 bLastSeg:1;
106 	u8 bEncrypt:1;
107 	u8 bTxDisableRateFallBack:1;
108 	u8 bTxUseDriverAssingedRate:1;
109 	u8 bHwSec:1; //indicate whether use Hw security. WB
110 
111 	u8 reserved1;
112 
113 	/* Tx Firmware Relaged flags (10-11)*/
114 	u8 bCTSEnable:1;
115 	u8 bRTSEnable:1;
116 	u8 bUseShortGI:1;
117 	u8 bUseShortPreamble:1;
118 	u8 bTxEnableFwCalcDur:1;
119 	u8 bAMPDUEnable:1;
120 	u8 bRTSSTBC:1;
121 	u8 RTSSC:1;
122 
123 	u8 bRTSBW:1;
124 	u8 bPacketBW:1;
125 	u8 bRTSUseShortPreamble:1;
126 	u8 bRTSUseShortGI:1;
127 	u8 bMulticast:1;
128 	u8 bBroadcast:1;
129 	//u8 reserved2:2;
130 	u8 drv_agg_enable:1;
131 	u8 reserved2:1;
132 
133 	/* Tx Desc related element(12-19) */
134 	u8 rata_index;
135 	u8 queue_index;
136 	//u8 reserved3;
137 	//u8 reserved4;
138 	u16 txbuf_size;
139 	//u8 reserved5;
140 	u8 RATRIndex;
141 	u8 reserved6;
142 	u8 reserved7;
143 	u8 reserved8;
144 
145 	/* Tx firmware related element(20-27) */
146 	u8 data_rate;
147 	u8 rts_rate;
148 	u8 ampdu_factor;
149 	u8 ampdu_density;
150 	//u8 reserved9;
151 	//u8 reserved10;
152 	//u8 reserved11;
153 	u8 DrvAggrNum;
154 	u16 pkt_size;
155 	u8 reserved12;
156 }cb_desc, *pcb_desc;
157 
158 /*--------------------------Define -------------------------------------------*/
159 #define MGN_1M                  0x02
160 #define MGN_2M                  0x04
161 #define MGN_5_5M                0x0b
162 #define MGN_11M                 0x16
163 
164 #define MGN_6M                  0x0c
165 #define MGN_9M                  0x12
166 #define MGN_12M                 0x18
167 #define MGN_18M                 0x24
168 #define MGN_24M                 0x30
169 #define MGN_36M                 0x48
170 #define MGN_48M                 0x60
171 #define MGN_54M                 0x6c
172 
173 #define MGN_MCS0                0x80
174 #define MGN_MCS1                0x81
175 #define MGN_MCS2                0x82
176 #define MGN_MCS3                0x83
177 #define MGN_MCS4                0x84
178 #define MGN_MCS5                0x85
179 #define MGN_MCS6                0x86
180 #define MGN_MCS7                0x87
181 #define MGN_MCS8                0x88
182 #define MGN_MCS9                0x89
183 #define MGN_MCS10               0x8a
184 #define MGN_MCS11               0x8b
185 #define MGN_MCS12               0x8c
186 #define MGN_MCS13               0x8d
187 #define MGN_MCS14               0x8e
188 #define MGN_MCS15               0x8f
189 
190 //----------------------------------------------------------------------------
191 //		802.11 Management frame Reason Code field
192 //----------------------------------------------------------------------------
193 enum	_ReasonCode{
194 	unspec_reason	= 0x1,
195 	auth_not_valid	= 0x2,
196 	deauth_lv_ss	= 0x3,
197 	inactivity		= 0x4,
198 	ap_overload	= 0x5,
199 	class2_err		= 0x6,
200 	class3_err		= 0x7,
201 	disas_lv_ss	= 0x8,
202 	asoc_not_auth	= 0x9,
203 
204 	//----MIC_CHECK
205 	mic_failure	= 0xe,
206 	//----END MIC_CHECK
207 
208 	// Reason code defined in 802.11i D10.0 p.28.
209 	invalid_IE		= 0x0d,
210 	four_way_tmout	= 0x0f,
211 	two_way_tmout	= 0x10,
212 	IE_dismatch	= 0x11,
213 	invalid_Gcipher = 0x12,
214 	invalid_Pcipher = 0x13,
215 	invalid_AKMP	= 0x14,
216 	unsup_RSNIEver = 0x15,
217 	invalid_RSNIE	= 0x16,
218 	auth_802_1x_fail= 0x17,
219 	ciper_reject		= 0x18,
220 
221 	// Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
222 	QoS_unspec		= 0x20, // 32
223 	QAP_bandwidth	= 0x21, // 33
224 	poor_condition	= 0x22, // 34
225 	no_facility	= 0x23, // 35
226 							// Where is 36???
227 	req_declined	= 0x25, // 37
228 	invalid_param	= 0x26, // 38
229 	req_not_honored= 0x27,	// 39
230 	TS_not_created	= 0x2F, // 47
231 	DL_not_allowed	= 0x30, // 48
232 	dest_not_exist	= 0x31, // 49
233 	dest_not_QSTA	= 0x32, // 50
234 };
235 
236 
237 
238 #define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A || \
239 		    priv->ieee80211->current_network.mode == IEEE_N_24G || \
240 		    priv->ieee80211->current_network.mode == IEEE_N_5G) ? \
241 		   16 : 10)
242 
243 #define MGMT_QUEUE_NUM 5
244 
245 #define IEEE_CMD_SET_WPA_PARAM			1
246 #define	IEEE_CMD_SET_WPA_IE			2
247 #define IEEE_CMD_SET_ENCRYPTION			3
248 #define IEEE_CMD_MLME				4
249 
250 #define IEEE_PARAM_WPA_ENABLED			1
251 #define IEEE_PARAM_TKIP_COUNTERMEASURES		2
252 #define IEEE_PARAM_DROP_UNENCRYPTED		3
253 #define IEEE_PARAM_PRIVACY_INVOKED		4
254 #define IEEE_PARAM_AUTH_ALGS			5
255 #define IEEE_PARAM_IEEE_802_1X			6
256 //It should consistent with the driver_XXX.c
257 //   David, 2006.9.26
258 #define IEEE_PARAM_WPAX_SELECT			7
259 //Added for notify the encryption type selection
260 //   David, 2006.9.26
261 #define IEEE_PROTO_WPA				1
262 #define IEEE_PROTO_RSN				2
263 //Added for notify the encryption type selection
264 //   David, 2006.9.26
265 #define IEEE_WPAX_USEGROUP			0
266 #define IEEE_WPAX_WEP40				1
267 #define IEEE_WPAX_TKIP				2
268 #define IEEE_WPAX_WRAP				3
269 #define IEEE_WPAX_CCMP				4
270 #define IEEE_WPAX_WEP104			5
271 
272 #define IEEE_KEY_MGMT_IEEE8021X			1
273 #define IEEE_KEY_MGMT_PSK			2
274 
275 #define IEEE_MLME_STA_DEAUTH			1
276 #define IEEE_MLME_STA_DISASSOC			2
277 
278 
279 #define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
280 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
281 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED	4
282 #define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
283 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED	6
284 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
285 
286 
287 #define	IEEE_CRYPT_ALG_NAME_LEN			16
288 
289 #define MAX_IE_LEN  0xff
290 
291 // added for kernel conflict
292 #define ieee80211_crypt_deinit_entries	ieee80211_crypt_deinit_entries_rsl
293 #define ieee80211_crypt_deinit_handler	ieee80211_crypt_deinit_handler_rsl
294 #define ieee80211_crypt_delayed_deinit	ieee80211_crypt_delayed_deinit_rsl
295 #define ieee80211_register_crypto_ops	ieee80211_register_crypto_ops_rsl
296 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
297 #define ieee80211_get_crypto_ops	ieee80211_get_crypto_ops_rsl
298 
299 #define ieee80211_ccmp_null		ieee80211_ccmp_null_rsl
300 
301 #define ieee80211_tkip_null		ieee80211_tkip_null_rsl
302 
303 #define ieee80211_wep_null		ieee80211_wep_null_rsl
304 
305 #define free_ieee80211			free_ieee80211_rsl
306 #define alloc_ieee80211			alloc_ieee80211_rsl
307 
308 #define ieee80211_rx			ieee80211_rx_rsl
309 #define ieee80211_rx_mgt		ieee80211_rx_mgt_rsl
310 
311 #define ieee80211_get_beacon		ieee80211_get_beacon_rsl
312 #define ieee80211_wake_queue		ieee80211_wake_queue_rsl
313 #define ieee80211_stop_queue		ieee80211_stop_queue_rsl
314 #define ieee80211_reset_queue		ieee80211_reset_queue_rsl
315 #define ieee80211_softmac_stop_protocol	ieee80211_softmac_stop_protocol_rsl
316 #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
317 #define ieee80211_is_shortslot		ieee80211_is_shortslot_rsl
318 #define ieee80211_is_54g		ieee80211_is_54g_rsl
319 #define ieee80211_wpa_supplicant_ioctl	ieee80211_wpa_supplicant_ioctl_rsl
320 #define ieee80211_ps_tx_ack		ieee80211_ps_tx_ack_rsl
321 #define ieee80211_softmac_xmit		ieee80211_softmac_xmit_rsl
322 #define ieee80211_stop_send_beacons	ieee80211_stop_send_beacons_rsl
323 #define notify_wx_assoc_event		notify_wx_assoc_event_rsl
324 #define SendDisassociation		SendDisassociation_rsl
325 #define ieee80211_disassociate		ieee80211_disassociate_rsl
326 #define ieee80211_start_send_beacons	ieee80211_start_send_beacons_rsl
327 #define ieee80211_stop_scan		ieee80211_stop_scan_rsl
328 #define ieee80211_send_probe_requests	ieee80211_send_probe_requests_rsl
329 #define ieee80211_softmac_scan_syncro	ieee80211_softmac_scan_syncro_rsl
330 #define ieee80211_start_scan_syncro	ieee80211_start_scan_syncro_rsl
331 
332 #define ieee80211_wx_get_essid		ieee80211_wx_get_essid_rsl
333 #define ieee80211_wx_set_essid		ieee80211_wx_set_essid_rsl
334 #define ieee80211_wx_set_rate		ieee80211_wx_set_rate_rsl
335 #define ieee80211_wx_get_rate		ieee80211_wx_get_rate_rsl
336 #define ieee80211_wx_set_wap		ieee80211_wx_set_wap_rsl
337 #define ieee80211_wx_get_wap		ieee80211_wx_get_wap_rsl
338 #define ieee80211_wx_set_mode		ieee80211_wx_set_mode_rsl
339 #define ieee80211_wx_get_mode		ieee80211_wx_get_mode_rsl
340 #define ieee80211_wx_set_scan		ieee80211_wx_set_scan_rsl
341 #define ieee80211_wx_get_freq		ieee80211_wx_get_freq_rsl
342 #define ieee80211_wx_set_freq		ieee80211_wx_set_freq_rsl
343 #define ieee80211_wx_set_rawtx		ieee80211_wx_set_rawtx_rsl
344 #define ieee80211_wx_get_name		ieee80211_wx_get_name_rsl
345 #define ieee80211_wx_set_power		ieee80211_wx_set_power_rsl
346 #define ieee80211_wx_get_power		ieee80211_wx_get_power_rsl
347 #define ieee80211_wlan_frequencies	ieee80211_wlan_frequencies_rsl
348 #define ieee80211_wx_set_rts		ieee80211_wx_set_rts_rsl
349 #define ieee80211_wx_get_rts		ieee80211_wx_get_rts_rsl
350 
351 #define ieee80211_txb_free		ieee80211_txb_free_rsl
352 
353 #define ieee80211_wx_set_gen_ie		ieee80211_wx_set_gen_ie_rsl
354 #define ieee80211_wx_get_scan		ieee80211_wx_get_scan_rsl
355 #define ieee80211_wx_set_encode		ieee80211_wx_set_encode_rsl
356 #define ieee80211_wx_get_encode		ieee80211_wx_get_encode_rsl
357 #define ieee80211_wx_set_mlme		ieee80211_wx_set_mlme_rsl
358 #define ieee80211_wx_set_auth		ieee80211_wx_set_auth_rsl
359 #define ieee80211_wx_set_encode_ext	ieee80211_wx_set_encode_ext_rsl
360 #define ieee80211_wx_get_encode_ext	ieee80211_wx_get_encode_ext_rsl
361 
362 
363 typedef struct ieee_param {
364 	u32 cmd;
365 	u8 sta_addr[ETH_ALEN];
366 	union {
367 		struct {
368 			u8 name;
369 			u32 value;
370 		} wpa_param;
371 		struct {
372 			u32 len;
373 			u8 reserved[32];
374 			u8 data[0];
375 		} wpa_ie;
376 		struct{
377 			int command;
378 			int reason_code;
379 		} mlme;
380 		struct {
381 			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
382 			u8 set_tx;
383 			u32 err;
384 			u8 idx;
385 			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
386 			u16 key_len;
387 			u8 key[0];
388 		} crypt;
389 	} u;
390 }ieee_param;
391 
392 
393 // linux under 2.6.9 release may not support it, so modify it for common use
394 #define MSECS(t) msecs_to_jiffies(t)
395 #define msleep_interruptible_rsl  msleep_interruptible
396 
397 #define IEEE80211_DATA_LEN		2304
398 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
399    6.2.1.1.2.
400 
401    The figure in section 7.1.2 suggests a body size of up to 2312
402    bytes is allowed, which is a bit confusing, I suspect this
403    represents the 2304 bytes of real data, plus a possible 8 bytes of
404    WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
405 #define IEEE80211_1ADDR_LEN 10
406 #define IEEE80211_2ADDR_LEN 16
407 #define IEEE80211_3ADDR_LEN 24
408 #define IEEE80211_4ADDR_LEN 30
409 #define IEEE80211_FCS_LEN    4
410 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
411 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
412 #define IEEE80211_MGMT_HDR_LEN 24
413 #define IEEE80211_DATA_HDR3_LEN 24
414 #define IEEE80211_DATA_HDR4_LEN 30
415 
416 #define MIN_FRAG_THRESHOLD     256U
417 #define MAX_FRAG_THRESHOLD     2346U
418 
419 
420 /* Frame control field constants */
421 #define IEEE80211_FCTL_VERS		0x0003
422 #define IEEE80211_FCTL_FTYPE		0x000c
423 #define IEEE80211_FCTL_STYPE		0x00f0
424 #define IEEE80211_FCTL_FRAMETYPE	0x00fc
425 #define IEEE80211_FCTL_TODS		0x0100
426 #define IEEE80211_FCTL_FROMDS		0x0200
427 #define IEEE80211_FCTL_DSTODS		0x0300 //added by david
428 #define IEEE80211_FCTL_MOREFRAGS	0x0400
429 #define IEEE80211_FCTL_RETRY		0x0800
430 #define IEEE80211_FCTL_PM		0x1000
431 #define IEEE80211_FCTL_MOREDATA		0x2000
432 #define IEEE80211_FCTL_WEP		0x4000
433 #define IEEE80211_FCTL_ORDER		0x8000
434 
435 #define IEEE80211_FTYPE_MGMT		0x0000
436 #define IEEE80211_FTYPE_CTL		0x0004
437 #define IEEE80211_FTYPE_DATA		0x0008
438 
439 /* management */
440 #define IEEE80211_STYPE_ASSOC_REQ	0x0000
441 #define IEEE80211_STYPE_ASSOC_RESP	0x0010
442 #define IEEE80211_STYPE_REASSOC_REQ	0x0020
443 #define IEEE80211_STYPE_REASSOC_RESP	0x0030
444 #define IEEE80211_STYPE_PROBE_REQ	0x0040
445 #define IEEE80211_STYPE_PROBE_RESP	0x0050
446 #define IEEE80211_STYPE_BEACON		0x0080
447 #define IEEE80211_STYPE_ATIM		0x0090
448 #define IEEE80211_STYPE_DISASSOC	0x00A0
449 #define IEEE80211_STYPE_AUTH		0x00B0
450 #define IEEE80211_STYPE_DEAUTH		0x00C0
451 #define IEEE80211_STYPE_MANAGE_ACT	0x00D0
452 
453 /* control */
454 #define IEEE80211_STYPE_PSPOLL		0x00A0
455 #define IEEE80211_STYPE_RTS		0x00B0
456 #define IEEE80211_STYPE_CTS		0x00C0
457 #define IEEE80211_STYPE_ACK		0x00D0
458 #define IEEE80211_STYPE_CFEND		0x00E0
459 #define IEEE80211_STYPE_CFENDACK	0x00F0
460 #define IEEE80211_STYPE_BLOCKACK   0x0094
461 
462 /* data */
463 #define IEEE80211_STYPE_DATA		0x0000
464 #define IEEE80211_STYPE_DATA_CFACK	0x0010
465 #define IEEE80211_STYPE_DATA_CFPOLL	0x0020
466 #define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
467 #define IEEE80211_STYPE_NULLFUNC	0x0040
468 #define IEEE80211_STYPE_CFACK		0x0050
469 #define IEEE80211_STYPE_CFPOLL		0x0060
470 #define IEEE80211_STYPE_CFACKPOLL	0x0070
471 #define IEEE80211_STYPE_QOS_DATA	0x0080 //added for WMM 2006/8/2
472 #define IEEE80211_STYPE_QOS_NULL	0x00C0
473 
474 #define IEEE80211_SCTL_FRAG		0x000F
475 #define IEEE80211_SCTL_SEQ		0xFFF0
476 
477 /* QOS control */
478 #define IEEE80211_QCTL_TID              0x000F
479 
480 #define	FC_QOS_BIT					BIT7
481 #define IsDataFrame(pdu)			( ((pdu[0] & 0x0C)==0x08) ? true : false )
482 #define	IsLegacyDataFrame(pdu)	(IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
483 //added by wb. Is this right?
484 #define IsQoSDataFrame(pframe)  ((*(u16 *)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
485 #define Frame_Order(pframe)     (*(u16 *)pframe&IEEE80211_FCTL_ORDER)
486 #define SN_LESS(a, b)		(((a-b)&0x800)!=0)
487 #define SN_EQUAL(a, b)	(a == b)
488 #define MAX_DEV_ADDR_SIZE 8
489 typedef enum _ACT_CATEGORY{
490 	ACT_CAT_QOS = 1,
491 	ACT_CAT_DLS = 2,
492 	ACT_CAT_BA  = 3,
493 	ACT_CAT_HT  = 7,
494 	ACT_CAT_WMM = 17,
495 } ACT_CATEGORY, *PACT_CATEGORY;
496 
497 typedef enum _TS_ACTION{
498 	ACT_ADDTSREQ = 0,
499 	ACT_ADDTSRSP = 1,
500 	ACT_DELTS    = 2,
501 	ACT_SCHEDULE = 3,
502 } TS_ACTION, *PTS_ACTION;
503 
504 typedef enum _BA_ACTION{
505 	ACT_ADDBAREQ = 0,
506 	ACT_ADDBARSP = 1,
507 	ACT_DELBA    = 2,
508 } BA_ACTION, *PBA_ACTION;
509 
510 typedef enum _InitialGainOpType{
511 	IG_Backup=0,
512 	IG_Restore,
513 	IG_Max
514 }InitialGainOpType;
515 
516 /* debug macros */
517 #define CONFIG_IEEE80211_DEBUG
518 #ifdef CONFIG_IEEE80211_DEBUG
519 extern u32 ieee80211_debug_level;
520 #define IEEE80211_DEBUG(level, fmt, args...) \
521 do { if (ieee80211_debug_level & (level)) \
522   printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
523 //wb added to debug out data buf
524 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
525 #define IEEE80211_DEBUG_DATA(level, data, datalen)	\
526 	do{ if ((ieee80211_debug_level & (level)) == (level))	\
527 		{	\
528 			int i;					\
529 			u8 *pdata = (u8 *) data;			\
530 			printk(KERN_DEBUG "ieee80211: %s()\n", __func__);	\
531 			for(i=0; i<(int)(datalen); i++)			\
532 			{						\
533 				printk("%2x ", pdata[i]);		\
534 				if ((i+1)%16 == 0) printk("\n");	\
535 			}				\
536 			printk("\n");			\
537 		}					\
538 	} while (0)
539 #else
540 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
541 #define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
542 #endif	/* CONFIG_IEEE80211_DEBUG */
543 
544 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
545 
546 /*
547  * To use the debug system;
548  *
549  * If you are defining a new debug classification, simply add it to the #define
550  * list here in the form of:
551  *
552  * #define IEEE80211_DL_xxxx VALUE
553  *
554  * shifting value to the left one bit from the previous entry.  xxxx should be
555  * the name of the classification (for example, WEP)
556  *
557  * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
558  * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
559  * to send output to that classification.
560  *
561  * To add your debug level to the list of levels seen when you perform
562  *
563  * % cat /proc/net/ipw/debug_level
564  *
565  * you simply need to add your entry to the ipw_debug_levels array.
566  *
567  * If you do not see debug_level in /proc/net/ipw then you do not have
568  * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
569  *
570  */
571 
572 #define IEEE80211_DL_INFO          (1<<0)
573 #define IEEE80211_DL_WX            (1<<1)
574 #define IEEE80211_DL_SCAN          (1<<2)
575 #define IEEE80211_DL_STATE         (1<<3)
576 #define IEEE80211_DL_MGMT          (1<<4)
577 #define IEEE80211_DL_FRAG          (1<<5)
578 #define IEEE80211_DL_EAP           (1<<6)
579 #define IEEE80211_DL_DROP          (1<<7)
580 
581 #define IEEE80211_DL_TX            (1<<8)
582 #define IEEE80211_DL_RX            (1<<9)
583 
584 #define IEEE80211_DL_HT		   (1<<10)  //HT
585 #define IEEE80211_DL_BA		   (1<<11)  //ba
586 #define IEEE80211_DL_TS		   (1<<12)  //TS
587 #define IEEE80211_DL_QOS           (1<<13)
588 #define IEEE80211_DL_REORDER	   (1<<14)
589 #define IEEE80211_DL_IOT	   (1<<15)
590 #define IEEE80211_DL_IPS	   (1<<16)
591 #define IEEE80211_DL_TRACE	   (1<<29)  //trace function, need to user net_ratelimit() together in order not to print too much to the screen
592 #define IEEE80211_DL_DATA	   (1<<30)   //use this flag to control whether print data buf out.
593 #define IEEE80211_DL_ERR	   (1<<31)   //always open
594 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
595 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
596 #define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
597 
598 #define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
599 #define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
600 #define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
601 #define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
602 #define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
603 #define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
604 #define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
605 #define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
606 #define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
607 #define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
608 
609 #include <linux/if_arp.h> /* ARPHRD_ETHER */
610 
611 #ifndef WIRELESS_SPY
612 #define WIRELESS_SPY		// enable iwspy support
613 #endif
614 #include <net/iw_handler.h>	// new driver API
615 
616 #ifndef ETH_P_PAE
617 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
618 #endif /* ETH_P_PAE */
619 
620 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
621 
622 #ifndef ETH_P_80211_RAW
623 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
624 #endif
625 
626 /* IEEE 802.11 defines */
627 
628 #define P80211_OUI_LEN 3
629 
630 struct ieee80211_snap_hdr {
631 
632 	u8    dsap;   /* always 0xAA */
633 	u8    ssap;   /* always 0xAA */
634 	u8    ctrl;   /* always 0x03 */
635 	u8    oui[P80211_OUI_LEN];    /* organizational universal id */
636 
637 } __packed;
638 
639 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
640 
641 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
642 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
643 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
644 
645 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
646 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
647 #define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
648 
649 /* Authentication algorithms */
650 #define WLAN_AUTH_OPEN 0
651 #define WLAN_AUTH_SHARED_KEY 1
652 #define WLAN_AUTH_LEAP 2
653 
654 #define WLAN_AUTH_CHALLENGE_LEN 128
655 
656 #define WLAN_CAPABILITY_BSS (1<<0)
657 #define WLAN_CAPABILITY_IBSS (1<<1)
658 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
659 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
660 #define WLAN_CAPABILITY_PRIVACY (1<<4)
661 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
662 #define WLAN_CAPABILITY_PBCC (1<<6)
663 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
664 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
665 #define WLAN_CAPABILITY_QOS (1<<9)
666 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
667 #define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
668 
669 /* 802.11g ERP information element */
670 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
671 #define WLAN_ERP_USE_PROTECTION (1<<1)
672 #define WLAN_ERP_BARKER_PREAMBLE (1<<2)
673 
674 /* Status codes */
675 enum ieee80211_statuscode {
676 	WLAN_STATUS_SUCCESS = 0,
677 	WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
678 	WLAN_STATUS_CAPS_UNSUPPORTED = 10,
679 	WLAN_STATUS_REASSOC_NO_ASSOC = 11,
680 	WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
681 	WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
682 	WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
683 	WLAN_STATUS_CHALLENGE_FAIL = 15,
684 	WLAN_STATUS_AUTH_TIMEOUT = 16,
685 	WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
686 	WLAN_STATUS_ASSOC_DENIED_RATES = 18,
687 	/* 802.11b */
688 	WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
689 	WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
690 	WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
691 	/* 802.11h */
692 	WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
693 	WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
694 	WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
695 	/* 802.11g */
696 	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
697 	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
698 	/* 802.11i */
699 	WLAN_STATUS_INVALID_IE = 40,
700 	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
701 	WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
702 	WLAN_STATUS_INVALID_AKMP = 43,
703 	WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
704 	WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
705 	WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
706 };
707 
708 /* Reason codes */
709 enum ieee80211_reasoncode {
710 	WLAN_REASON_UNSPECIFIED = 1,
711 	WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
712 	WLAN_REASON_DEAUTH_LEAVING = 3,
713 	WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
714 	WLAN_REASON_DISASSOC_AP_BUSY = 5,
715 	WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
716 	WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
717 	WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
718 	WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
719 	/* 802.11h */
720 	WLAN_REASON_DISASSOC_BAD_POWER = 10,
721 	WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
722 	/* 802.11i */
723 	WLAN_REASON_INVALID_IE = 13,
724 	WLAN_REASON_MIC_FAILURE = 14,
725 	WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
726 	WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
727 	WLAN_REASON_IE_DIFFERENT = 17,
728 	WLAN_REASON_INVALID_GROUP_CIPHER = 18,
729 	WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
730 	WLAN_REASON_INVALID_AKMP = 20,
731 	WLAN_REASON_UNSUPP_RSN_VERSION = 21,
732 	WLAN_REASON_INVALID_RSN_IE_CAP = 22,
733 	WLAN_REASON_IEEE8021X_FAILED = 23,
734 	WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
735 };
736 
737 #define IEEE80211_STATMASK_SIGNAL (1<<0)
738 #define IEEE80211_STATMASK_RSSI (1<<1)
739 #define IEEE80211_STATMASK_NOISE (1<<2)
740 #define IEEE80211_STATMASK_RATE (1<<3)
741 #define IEEE80211_STATMASK_WEMASK 0x7
742 
743 #define IEEE80211_CCK_MODULATION    (1<<0)
744 #define IEEE80211_OFDM_MODULATION   (1<<1)
745 
746 #define IEEE80211_24GHZ_BAND     (1<<0)
747 #define IEEE80211_52GHZ_BAND     (1<<1)
748 
749 #define IEEE80211_CCK_RATE_LEN			4
750 #define IEEE80211_CCK_RATE_1MB			0x02
751 #define IEEE80211_CCK_RATE_2MB			0x04
752 #define IEEE80211_CCK_RATE_5MB			0x0B
753 #define IEEE80211_CCK_RATE_11MB			0x16
754 #define IEEE80211_OFDM_RATE_LEN			8
755 #define IEEE80211_OFDM_RATE_6MB			0x0C
756 #define IEEE80211_OFDM_RATE_9MB			0x12
757 #define IEEE80211_OFDM_RATE_12MB		0x18
758 #define IEEE80211_OFDM_RATE_18MB		0x24
759 #define IEEE80211_OFDM_RATE_24MB		0x30
760 #define IEEE80211_OFDM_RATE_36MB		0x48
761 #define IEEE80211_OFDM_RATE_48MB		0x60
762 #define IEEE80211_OFDM_RATE_54MB		0x6C
763 #define IEEE80211_BASIC_RATE_MASK		0x80
764 
765 #define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
766 #define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
767 #define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
768 #define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
769 #define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
770 #define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
771 #define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
772 #define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
773 #define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
774 #define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
775 #define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
776 #define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
777 
778 #define IEEE80211_CCK_RATES_MASK		0x0000000F
779 #define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
780 	IEEE80211_CCK_RATE_2MB_MASK)
781 #define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
782 	IEEE80211_CCK_RATE_5MB_MASK | \
783 	IEEE80211_CCK_RATE_11MB_MASK)
784 
785 #define IEEE80211_OFDM_RATES_MASK		0x00000FF0
786 #define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
787 	IEEE80211_OFDM_RATE_12MB_MASK | \
788 	IEEE80211_OFDM_RATE_24MB_MASK)
789 #define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
790 	IEEE80211_OFDM_RATE_9MB_MASK  | \
791 	IEEE80211_OFDM_RATE_18MB_MASK | \
792 	IEEE80211_OFDM_RATE_36MB_MASK | \
793 	IEEE80211_OFDM_RATE_48MB_MASK | \
794 	IEEE80211_OFDM_RATE_54MB_MASK)
795 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
796 				IEEE80211_CCK_DEFAULT_RATES_MASK)
797 
798 #define IEEE80211_NUM_OFDM_RATES	    8
799 #define IEEE80211_NUM_CCK_RATES		    4
800 #define IEEE80211_OFDM_SHIFT_MASK_A         4
801 
802 
803 /* this is stolen and modified from the madwifi driver*/
804 #define IEEE80211_FC0_TYPE_MASK		0x0c
805 #define IEEE80211_FC0_TYPE_DATA		0x08
806 #define IEEE80211_FC0_SUBTYPE_MASK	0xB0
807 #define IEEE80211_FC0_SUBTYPE_QOS	0x80
808 
809 #define IEEE80211_QOS_HAS_SEQ(fc) \
810 	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
811 	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
812 
813 /* this is stolen from ipw2200 driver */
814 #define IEEE_IBSS_MAC_HASH_SIZE 31
815 struct ieee_ibss_seq {
816 	u8 mac[ETH_ALEN];
817 	u16 seq_num[17];
818 	u16 frag_num[17];
819 	unsigned long packet_time[17];
820 	struct list_head list;
821 };
822 
823 /* NOTE: This data is for statistical purposes; not all hardware provides this
824  *       information for frames received.  Not setting these will not cause
825  *       any adverse affects. */
826 struct ieee80211_rx_stats {
827 	u32 mac_time[2];
828 	s8 rssi;
829 	u8 signal;
830 	u8 noise;
831 	u16 rate; /* in 100 kbps */
832 	u8 received_channel;
833 	u8 control;
834 	u8 mask;
835 	u8 freq;
836 	u16 len;
837 	u64 tsf;
838 	u32 beacon_time;
839 	u8 nic_type;
840 	u16       Length;
841 	//      u8        DataRate;      // In 0.5 Mbps
842 	u8        SignalQuality; // in 0-100 index.
843 	s32       RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
844 	s8        RxPower; // in dBm Translate from PWdB
845 	u8        SignalStrength; // in 0-100 index.
846 	u16       bHwError:1;
847 	u16       bCRC:1;
848 	u16       bICV:1;
849 	u16       bShortPreamble:1;
850 	u16       Antenna:1;      //for rtl8185
851 	u16       Decrypted:1;    //for rtl8185, rtl8187
852 	u16       Wakeup:1;       //for rtl8185
853 	u16       Reserved0:1;    //for rtl8185
854 	u8        AGC;
855 	u32       TimeStampLow;
856 	u32       TimeStampHigh;
857 	bool      bShift;
858 	bool      bIsQosData;             // Added by Annie, 2005-12-22.
859 	u8        UserPriority;
860 
861 	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
862 	//1Attention Please!!!<11n or 8190 specific code should be put below this line>
863 	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
864 
865 	u8        RxDrvInfoSize;
866 	u8        RxBufShift;
867 	bool      bIsAMPDU;
868 	bool      bFirstMPDU;
869 	bool      bContainHTC;
870 	bool      RxIs40MHzPacket;
871 	u32       RxPWDBAll;
872 	u8        RxMIMOSignalStrength[4];        // in 0~100 index
873 	s8        RxMIMOSignalQuality[2];
874 	bool      bPacketMatchBSSID;
875 	bool      bIsCCK;
876 	bool      bPacketToSelf;
877 	//added by amy
878 	u8        *virtual_address;
879 	u16          packetlength;              // Total packet length: Must equal to sum of all FragLength
880 	u16          fraglength;                        // FragLength should equal to PacketLength in non-fragment case
881 	u16          fragoffset;                        // Data offset for this fragment
882 	u16          ntotalfrag;
883 	bool		  bisrxaggrsubframe;
884 	bool		  bPacketBeacon;	//cosa add for rssi
885 	bool		  bToSelfBA;		//cosa add for rssi
886 	char	  cck_adc_pwdb[4];	//cosa add for rx path selection
887 	u16		  Seq_Num;
888 
889 };
890 
891 /* IEEE 802.11 requires that STA supports concurrent reception of at least
892  * three fragmented frames. This define can be increased to support more
893  * concurrent frames, but it should be noted that each entry can consume about
894  * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
895 #define IEEE80211_FRAG_CACHE_LEN 4
896 
897 struct ieee80211_frag_entry {
898 	unsigned long first_frag_time;
899 	unsigned int seq;
900 	unsigned int last_frag;
901 	struct sk_buff *skb;
902 	u8 src_addr[ETH_ALEN];
903 	u8 dst_addr[ETH_ALEN];
904 };
905 
906 struct ieee80211_stats {
907 	unsigned int tx_unicast_frames;
908 	unsigned int tx_multicast_frames;
909 	unsigned int tx_fragments;
910 	unsigned int tx_unicast_octets;
911 	unsigned int tx_multicast_octets;
912 	unsigned int tx_deferred_transmissions;
913 	unsigned int tx_single_retry_frames;
914 	unsigned int tx_multiple_retry_frames;
915 	unsigned int tx_retry_limit_exceeded;
916 	unsigned int tx_discards;
917 	unsigned int rx_unicast_frames;
918 	unsigned int rx_multicast_frames;
919 	unsigned int rx_fragments;
920 	unsigned int rx_unicast_octets;
921 	unsigned int rx_multicast_octets;
922 	unsigned int rx_fcs_errors;
923 	unsigned int rx_discards_no_buffer;
924 	unsigned int tx_discards_wrong_sa;
925 	unsigned int rx_discards_undecryptable;
926 	unsigned int rx_message_in_msg_fragments;
927 	unsigned int rx_message_in_bad_msg_fragments;
928 };
929 
930 struct ieee80211_device;
931 
932 #include "ieee80211_crypt.h"
933 
934 #define SEC_KEY_1         (1<<0)
935 #define SEC_KEY_2         (1<<1)
936 #define SEC_KEY_3         (1<<2)
937 #define SEC_KEY_4         (1<<3)
938 #define SEC_ACTIVE_KEY    (1<<4)
939 #define SEC_AUTH_MODE     (1<<5)
940 #define SEC_UNICAST_GROUP (1<<6)
941 #define SEC_LEVEL         (1<<7)
942 #define SEC_ENABLED       (1<<8)
943 #define SEC_ENCRYPT       (1<<9)
944 
945 #define SEC_LEVEL_0      0 /* None */
946 #define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
947 #define SEC_LEVEL_2      2 /* Level 1 + TKIP */
948 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
949 #define SEC_LEVEL_3      4 /* Level 2 + CCMP */
950 
951 #define SEC_ALG_NONE            0
952 #define SEC_ALG_WEP             1
953 #define SEC_ALG_TKIP            2
954 #define SEC_ALG_CCMP            3
955 
956 #define WEP_KEYS		4
957 #define WEP_KEY_LEN		13
958 #define SCM_KEY_LEN             32
959 #define SCM_TEMPORAL_KEY_LENGTH 16
960 
961 struct ieee80211_security {
962 	u16 active_key:2,
963 	    enabled:1,
964 	    auth_mode:2,
965 	    auth_algo:4,
966 	    unicast_uses_group:1,
967 	    encrypt:1;
968 	u8 key_sizes[WEP_KEYS];
969 	u8 keys[WEP_KEYS][SCM_KEY_LEN];
970 	u8 level;
971 	u16 flags;
972 } __packed;
973 
974 
975 /*
976  802.11 data frame from AP
977       ,-------------------------------------------------------------------.
978 Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
979       |------|------|---------|---------|---------|------|---------|------|
980 Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
981       |      | tion | (BSSID) |         |         | ence |  data   |      |
982       `-------------------------------------------------------------------'
983 Total: 28-2340 bytes
984 */
985 
986 /* Management Frame Information Element Types */
987 enum ieee80211_mfie {
988 	MFIE_TYPE_SSID = 0,
989 	MFIE_TYPE_RATES = 1,
990 	MFIE_TYPE_FH_SET = 2,
991 	MFIE_TYPE_DS_SET = 3,
992 	MFIE_TYPE_CF_SET = 4,
993 	MFIE_TYPE_TIM = 5,
994 	MFIE_TYPE_IBSS_SET = 6,
995 	MFIE_TYPE_COUNTRY = 7,
996 	MFIE_TYPE_HOP_PARAMS = 8,
997 	MFIE_TYPE_HOP_TABLE = 9,
998 	MFIE_TYPE_REQUEST = 10,
999 	MFIE_TYPE_CHALLENGE = 16,
1000 	MFIE_TYPE_POWER_CONSTRAINT = 32,
1001 	MFIE_TYPE_POWER_CAPABILITY = 33,
1002 	MFIE_TYPE_TPC_REQUEST = 34,
1003 	MFIE_TYPE_TPC_REPORT = 35,
1004 	MFIE_TYPE_SUPP_CHANNELS = 36,
1005 	MFIE_TYPE_CSA = 37,
1006 	MFIE_TYPE_MEASURE_REQUEST = 38,
1007 	MFIE_TYPE_MEASURE_REPORT = 39,
1008 	MFIE_TYPE_QUIET = 40,
1009 	MFIE_TYPE_IBSS_DFS = 41,
1010 	MFIE_TYPE_ERP = 42,
1011 	MFIE_TYPE_RSN = 48,
1012 	MFIE_TYPE_RATES_EX = 50,
1013 	MFIE_TYPE_HT_CAP= 45,
1014 	 MFIE_TYPE_HT_INFO= 61,
1015 	 MFIE_TYPE_AIRONET=133,
1016 	MFIE_TYPE_GENERIC = 221,
1017 	MFIE_TYPE_QOS_PARAMETER = 222,
1018 };
1019 
1020 /* Minimal header; can be used for passing 802.11 frames with sufficient
1021  * information to determine what type of underlying data type is actually
1022  * stored in the data. */
1023 struct ieee80211_hdr {
1024 	__le16 frame_ctl;
1025 	__le16 duration_id;
1026 	u8 payload[0];
1027 } __packed;
1028 
1029 struct ieee80211_hdr_1addr {
1030 	__le16 frame_ctl;
1031 	__le16 duration_id;
1032 	u8 addr1[ETH_ALEN];
1033 	u8 payload[0];
1034 } __packed;
1035 
1036 struct ieee80211_hdr_2addr {
1037 	__le16 frame_ctl;
1038 	__le16 duration_id;
1039 	u8 addr1[ETH_ALEN];
1040 	u8 addr2[ETH_ALEN];
1041 	u8 payload[0];
1042 } __packed;
1043 
1044 struct ieee80211_hdr_3addr {
1045 	__le16 frame_ctl;
1046 	__le16 duration_id;
1047 	u8 addr1[ETH_ALEN];
1048 	u8 addr2[ETH_ALEN];
1049 	u8 addr3[ETH_ALEN];
1050 	__le16 seq_ctl;
1051 	u8 payload[0];
1052 } __packed;
1053 
1054 struct ieee80211_hdr_4addr {
1055 	__le16 frame_ctl;
1056 	__le16 duration_id;
1057 	u8 addr1[ETH_ALEN];
1058 	u8 addr2[ETH_ALEN];
1059 	u8 addr3[ETH_ALEN];
1060 	__le16 seq_ctl;
1061 	u8 addr4[ETH_ALEN];
1062 	u8 payload[0];
1063 } __packed;
1064 
1065 struct ieee80211_hdr_3addrqos {
1066 	__le16 frame_ctl;
1067 	__le16 duration_id;
1068 	u8 addr1[ETH_ALEN];
1069 	u8 addr2[ETH_ALEN];
1070 	u8 addr3[ETH_ALEN];
1071 	__le16 seq_ctl;
1072 	u8 payload[0];
1073 	__le16 qos_ctl;
1074 } __packed;
1075 
1076 struct ieee80211_hdr_4addrqos {
1077 	__le16 frame_ctl;
1078 	__le16 duration_id;
1079 	u8 addr1[ETH_ALEN];
1080 	u8 addr2[ETH_ALEN];
1081 	u8 addr3[ETH_ALEN];
1082 	__le16 seq_ctl;
1083 	u8 addr4[ETH_ALEN];
1084 	u8 payload[0];
1085 	__le16 qos_ctl;
1086 } __packed;
1087 
1088 struct ieee80211_info_element {
1089 	u8 id;
1090 	u8 len;
1091 	u8 data[0];
1092 } __packed;
1093 
1094 struct ieee80211_authentication {
1095 	struct ieee80211_hdr_3addr header;
1096 	__le16 algorithm;
1097 	__le16 transaction;
1098 	__le16 status;
1099 	/*challenge*/
1100 	struct ieee80211_info_element info_element[0];
1101 } __packed;
1102 
1103 struct ieee80211_disassoc {
1104 	struct ieee80211_hdr_3addr header;
1105 	__le16 reason;
1106 } __packed;
1107 
1108 struct ieee80211_probe_request {
1109 	struct ieee80211_hdr_3addr header;
1110 	/* SSID, supported rates */
1111 	struct ieee80211_info_element info_element[0];
1112 } __packed;
1113 
1114 struct ieee80211_probe_response {
1115 	struct ieee80211_hdr_3addr header;
1116 	__le32 time_stamp[2];
1117 	__le16 beacon_interval;
1118 	__le16 capability;
1119 	/* SSID, supported rates, FH params, DS params,
1120 	 * CF params, IBSS params, TIM (if beacon), RSN */
1121 	struct ieee80211_info_element info_element[0];
1122 } __packed;
1123 
1124 /* Alias beacon for probe_response */
1125 #define ieee80211_beacon ieee80211_probe_response
1126 
1127 struct ieee80211_assoc_request_frame {
1128 	struct ieee80211_hdr_3addr header;
1129 	__le16 capability;
1130 	__le16 listen_interval;
1131 	/* SSID, supported rates, RSN */
1132 	struct ieee80211_info_element info_element[0];
1133 } __packed;
1134 
1135 struct ieee80211_reassoc_request_frame {
1136 	struct ieee80211_hdr_3addr header;
1137 	__le16 capability;
1138 	__le16 listen_interval;
1139 	u8 current_ap[ETH_ALEN];
1140 	/* SSID, supported rates, RSN */
1141 	struct ieee80211_info_element info_element[0];
1142 } __packed;
1143 
1144 struct ieee80211_assoc_response_frame {
1145 	struct ieee80211_hdr_3addr header;
1146 	__le16 capability;
1147 	__le16 status;
1148 	__le16 aid;
1149 	struct ieee80211_info_element info_element[0]; /* supported rates */
1150 } __packed;
1151 
1152 struct ieee80211_txb {
1153 	u8 nr_frags;
1154 	u8 encrypted;
1155 	u8 queue_index;
1156 	u8 rts_included;
1157 	u16 reserved;
1158 	__le16 frag_size;
1159 	__le16 payload_size;
1160 	struct sk_buff *fragments[0];
1161 };
1162 
1163 #define MAX_TX_AGG_COUNT		  16
1164 struct ieee80211_drv_agg_txb {
1165 	u8 nr_drv_agg_frames;
1166 	struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
1167 } __packed;
1168 
1169 #define MAX_SUBFRAME_COUNT		  64
1170 struct ieee80211_rxb {
1171 	u8 nr_subframes;
1172 	struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
1173 	u8 dst[ETH_ALEN];
1174 	u8 src[ETH_ALEN];
1175 } __packed;
1176 
1177 typedef union _frameqos {
1178 	u16 shortdata;
1179 	u8  chardata[2];
1180 	struct {
1181 		u16 tid:4;
1182 		u16 eosp:1;
1183 		u16 ack_policy:2;
1184 		u16 reserved:1;
1185 		u16 txop:8;
1186 	}field;
1187 } frameqos, *pframeqos;
1188 
1189 /* SWEEP TABLE ENTRIES NUMBER*/
1190 #define MAX_SWEEP_TAB_ENTRIES		  42
1191 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
1192 /* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
1193  * only use 8, and then use extended rates for the remaining supported
1194  * rates.  Other APs, however, stick all of their supported rates on the
1195  * main rates information element... */
1196 #define MAX_RATES_LENGTH                  ((u8)12)
1197 #define MAX_RATES_EX_LENGTH               ((u8)16)
1198 #define MAX_NETWORK_COUNT                  128
1199 
1200 #define MAX_CHANNEL_NUMBER                 161
1201 #define IEEE80211_SOFTMAC_SCAN_TIME	   100
1202 //(HZ / 2)
1203 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1204 
1205 #define CRC_LENGTH                 4U
1206 
1207 #define MAX_WPA_IE_LEN 64
1208 
1209 #define NETWORK_EMPTY_ESSID (1<<0)
1210 #define NETWORK_HAS_OFDM    (1<<1)
1211 #define NETWORK_HAS_CCK     (1<<2)
1212 
1213 /* QoS structure */
1214 #define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
1215 #define NETWORK_HAS_QOS_INFORMATION     (1<<4)
1216 #define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
1217 					 NETWORK_HAS_QOS_INFORMATION)
1218 /* 802.11h */
1219 #define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
1220 #define NETWORK_HAS_CSA                 (1<<6)
1221 #define NETWORK_HAS_QUIET               (1<<7)
1222 #define NETWORK_HAS_IBSS_DFS            (1<<8)
1223 #define NETWORK_HAS_TPC_REPORT          (1<<9)
1224 
1225 #define NETWORK_HAS_ERP_VALUE           (1<<10)
1226 
1227 #define QOS_QUEUE_NUM                   4
1228 #define QOS_OUI_LEN                     3
1229 #define QOS_OUI_TYPE                    2
1230 #define QOS_ELEMENT_ID                  221
1231 #define QOS_OUI_INFO_SUB_TYPE           0
1232 #define QOS_OUI_PARAM_SUB_TYPE          1
1233 #define QOS_VERSION_1                   1
1234 #define QOS_AIFSN_MIN_VALUE             2
1235 struct ieee80211_qos_information_element {
1236 	u8 elementID;
1237 	u8 length;
1238 	u8 qui[QOS_OUI_LEN];
1239 	u8 qui_type;
1240 	u8 qui_subtype;
1241 	u8 version;
1242 	u8 ac_info;
1243 } __packed;
1244 
1245 struct ieee80211_qos_ac_parameter {
1246 	u8 aci_aifsn;
1247 	u8 ecw_min_max;
1248 	__le16 tx_op_limit;
1249 } __packed;
1250 
1251 struct ieee80211_qos_parameter_info {
1252 	struct ieee80211_qos_information_element info_element;
1253 	u8 reserved;
1254 	struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
1255 } __packed;
1256 
1257 struct ieee80211_qos_parameters {
1258 	__le16 cw_min[QOS_QUEUE_NUM];
1259 	__le16 cw_max[QOS_QUEUE_NUM];
1260 	u8 aifs[QOS_QUEUE_NUM];
1261 	u8 flag[QOS_QUEUE_NUM];
1262 	__le16 tx_op_limit[QOS_QUEUE_NUM];
1263 } __packed;
1264 
1265 struct ieee80211_qos_data {
1266 	struct ieee80211_qos_parameters parameters;
1267 	int active;
1268 	int supported;
1269 	u8 param_count;
1270 	u8 old_param_count;
1271 };
1272 
1273 struct ieee80211_tim_parameters {
1274 	u8 tim_count;
1275 	u8 tim_period;
1276 } __packed;
1277 
1278 //#else
1279 struct ieee80211_wmm_ac_param {
1280 	u8 ac_aci_acm_aifsn;
1281 	u8 ac_ecwmin_ecwmax;
1282 	u16 ac_txop_limit;
1283 };
1284 
1285 struct ieee80211_wmm_ts_info {
1286 	u8 ac_dir_tid;
1287 	u8 ac_up_psb;
1288 	u8 reserved;
1289 } __packed;
1290 
1291 struct ieee80211_wmm_tspec_elem {
1292 	struct ieee80211_wmm_ts_info ts_info;
1293 	u16 norm_msdu_size;
1294 	u16 max_msdu_size;
1295 	u32 min_serv_inter;
1296 	u32 max_serv_inter;
1297 	u32 inact_inter;
1298 	u32 suspen_inter;
1299 	u32 serv_start_time;
1300 	u32 min_data_rate;
1301 	u32 mean_data_rate;
1302 	u32 peak_data_rate;
1303 	u32 max_burst_size;
1304 	u32 delay_bound;
1305 	u32 min_phy_rate;
1306 	u16 surp_band_allow;
1307 	u16 medium_time;
1308 } __packed;
1309 enum eap_type {
1310 	EAP_PACKET = 0,
1311 	EAPOL_START,
1312 	EAPOL_LOGOFF,
1313 	EAPOL_KEY,
1314 	EAPOL_ENCAP_ASF_ALERT
1315 };
1316 
1317 static const char *eap_types[] = {
1318 	[EAP_PACKET]		= "EAP-Packet",
1319 	[EAPOL_START]		= "EAPOL-Start",
1320 	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
1321 	[EAPOL_KEY]		= "EAPOL-Key",
1322 	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
1323 };
1324 
eap_get_type(int type)1325 static inline const char *eap_get_type(int type)
1326 {
1327 	return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
1328 }
1329 //added by amy for reorder
Frame_QoSTID(u8 * buf)1330 static inline u8 Frame_QoSTID(u8 *buf)
1331 {
1332 	struct ieee80211_hdr_3addr *hdr;
1333 	u16 fc;
1334 	hdr = (struct ieee80211_hdr_3addr *)buf;
1335 	fc = le16_to_cpu(hdr->frame_ctl);
1336 	return (u8)((frameqos *)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
1337 }
1338 
1339 //added by amy for reorder
1340 
1341 struct eapol {
1342 	u8 snap[6];
1343 	u16 ethertype;
1344 	u8 version;
1345 	u8 type;
1346 	u16 length;
1347 } __packed;
1348 
1349 struct ieee80211_softmac_stats{
1350 	unsigned int rx_ass_ok;
1351 	unsigned int rx_ass_err;
1352 	unsigned int rx_probe_rq;
1353 	unsigned int tx_probe_rs;
1354 	unsigned int tx_beacons;
1355 	unsigned int rx_auth_rq;
1356 	unsigned int rx_auth_rs_ok;
1357 	unsigned int rx_auth_rs_err;
1358 	unsigned int tx_auth_rq;
1359 	unsigned int no_auth_rs;
1360 	unsigned int no_ass_rs;
1361 	unsigned int tx_ass_rq;
1362 	unsigned int rx_ass_rq;
1363 	unsigned int tx_probe_rq;
1364 	unsigned int reassoc;
1365 	unsigned int swtxstop;
1366 	unsigned int swtxawake;
1367 	unsigned char CurrentShowTxate;
1368 	unsigned char last_packet_rate;
1369 	unsigned int txretrycount;
1370 };
1371 
1372 #define BEACON_PROBE_SSID_ID_POSITION 12
1373 
1374 struct ieee80211_info_element_hdr {
1375 	u8 id;
1376 	u8 len;
1377 } __packed;
1378 
1379 /*
1380  * These are the data types that can make up management packets
1381  *
1382 	u16 auth_algorithm;
1383 	u16 auth_sequence;
1384 	u16 beacon_interval;
1385 	u16 capability;
1386 	u8 current_ap[ETH_ALEN];
1387 	u16 listen_interval;
1388 	struct {
1389 		u16 association_id:14, reserved:2;
1390 	} __packed;
1391 	u32 time_stamp[2];
1392 	u16 reason;
1393 	u16 status;
1394 */
1395 
1396 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1397 #define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1398 
1399 enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
1400 #define MAX_SP_Len  (WMM_all_frame << 4)
1401 #define IEEE80211_QOS_TID 0x0f
1402 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1403 
1404 #define IEEE80211_DTIM_MBCAST 4
1405 #define IEEE80211_DTIM_UCAST 2
1406 #define IEEE80211_DTIM_VALID 1
1407 #define IEEE80211_DTIM_INVALID 0
1408 
1409 #define IEEE80211_PS_DISABLED 0
1410 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1411 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1412 
1413 //added by David for QoS 2006/6/30
1414 //#define WMM_Hang_8187
1415 #ifdef WMM_Hang_8187
1416 #undef WMM_Hang_8187
1417 #endif
1418 
1419 #define WME_AC_BK   0x00
1420 #define WME_AC_BE   0x01
1421 #define WME_AC_VI   0x02
1422 #define WME_AC_VO   0x03
1423 #define WME_ACI_MASK 0x03
1424 #define WME_AIFSN_MASK 0x03
1425 #define WME_AC_PRAM_LEN 16
1426 
1427 #define MAX_RECEIVE_BUFFER_SIZE 9100
1428 
1429 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1430 //#define UP2AC(up)	((up<3) ? ((up==0)?1:0) : (up>>1))
1431 #define UP2AC(up) (		   \
1432 	((up) < 1) ? WME_AC_BE : \
1433 	((up) < 3) ? WME_AC_BK : \
1434 	((up) < 4) ? WME_AC_BE : \
1435 	((up) < 6) ? WME_AC_VI : \
1436 	WME_AC_VO)
1437 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1438 #define AC2UP(_ac)	(       \
1439 	((_ac) == WME_AC_VO) ? 6 : \
1440 	((_ac) == WME_AC_VI) ? 5 : \
1441 	((_ac) == WME_AC_BK) ? 1 : \
1442 	0)
1443 
1444 #define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
1445 #define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address plus ether type*/
1446 
1447 struct	ether_header {
1448 	u8 ether_dhost[ETHER_ADDR_LEN];
1449 	u8 ether_shost[ETHER_ADDR_LEN];
1450 	u16 ether_type;
1451 } __packed;
1452 
1453 #ifndef ETHERTYPE_PAE
1454 #define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
1455 #endif
1456 #ifndef ETHERTYPE_IP
1457 #define	ETHERTYPE_IP	0x0800		/* IP protocol */
1458 #endif
1459 
1460 typedef enum _erp_t{
1461 	ERP_NonERPpresent	= 0x01,
1462 	ERP_UseProtection	= 0x02,
1463 	ERP_BarkerPreambleMode = 0x04,
1464 } erp_t;
1465 
1466 
1467 struct ieee80211_network {
1468 	/* These entries are used to identify a unique network */
1469 	u8 bssid[ETH_ALEN];
1470 	u8 channel;
1471 	/* Ensure null-terminated for any debug msgs */
1472 	u8 ssid[IW_ESSID_MAX_SIZE + 1];
1473 	u8 ssid_len;
1474 	struct ieee80211_qos_data qos_data;
1475 
1476 	//added by amy for LEAP
1477 	bool	bWithAironetIE;
1478 	bool	bCkipSupported;
1479 	bool	bCcxRmEnable;
1480 	u16	CcxRmState[2];
1481 	// CCXv4 S59, MBSSID.
1482 	bool	bMBssidValid;
1483 	u8	MBssidMask;
1484 	u8	MBssid[6];
1485 	// CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1486 	bool	bWithCcxVerNum;
1487 	u8	BssCcxVerNumber;
1488 	/* These are network statistics */
1489 	struct ieee80211_rx_stats stats;
1490 	u16 capability;
1491 	u8  rates[MAX_RATES_LENGTH];
1492 	u8  rates_len;
1493 	u8  rates_ex[MAX_RATES_EX_LENGTH];
1494 	u8  rates_ex_len;
1495 	unsigned long last_scanned;
1496 	u8  mode;
1497 	u32 flags;
1498 	u32 last_associate;
1499 	u32 time_stamp[2];
1500 	u16 beacon_interval;
1501 	u16 listen_interval;
1502 	u16 atim_window;
1503 	u8  erp_value;
1504 	u8  wpa_ie[MAX_WPA_IE_LEN];
1505 	size_t wpa_ie_len;
1506 	u8  rsn_ie[MAX_WPA_IE_LEN];
1507 	size_t rsn_ie_len;
1508 
1509 	struct ieee80211_tim_parameters tim;
1510 	u8  dtim_period;
1511 	u8  dtim_data;
1512 	u32 last_dtim_sta_time[2];
1513 
1514 	//appeded for QoS
1515 	u8 wmm_info;
1516 	struct ieee80211_wmm_ac_param wmm_param[4];
1517 	u8 QoS_Enable;
1518 #ifdef THOMAS_TURBO
1519 	u8 Turbo_Enable;//enable turbo mode, added by thomas
1520 #endif
1521 	u16 CountryIeLen;
1522 	u8 CountryIeBuf[MAX_IE_LEN];
1523 	// HT Related, by amy, 2008.04.29
1524 	BSS_HT	bssht;
1525 	// Add to handle broadcom AP management frame CCK rate.
1526 	bool broadcom_cap_exist;
1527 	bool ralink_cap_exist;
1528 	bool atheros_cap_exist;
1529 	bool cisco_cap_exist;
1530 	bool unknown_cap_exist;
1531 //	u8	berp_info;
1532 	bool	berp_info_valid;
1533 	bool buseprotection;
1534 	//put at the end of the structure.
1535 	struct list_head list;
1536 };
1537 
1538 enum ieee80211_state {
1539 
1540 	/* the card is not linked at all */
1541 	IEEE80211_NOLINK = 0,
1542 
1543 	/* IEEE80211_ASSOCIATING* are for BSS client mode
1544 	 * the driver shall not perform RX filtering unless
1545 	 * the state is LINKED.
1546 	 * The driver shall just check for the state LINKED and
1547 	 * defaults to NOLINK for ALL the other states (including
1548 	 * LINKED_SCANNING)
1549 	 */
1550 
1551 	/* the association procedure will start (wq scheduling)*/
1552 	IEEE80211_ASSOCIATING,
1553 	IEEE80211_ASSOCIATING_RETRY,
1554 
1555 	/* the association procedure is sending AUTH request*/
1556 	IEEE80211_ASSOCIATING_AUTHENTICATING,
1557 
1558 	/* the association procedure has successfully authentcated
1559 	 * and is sending association request
1560 	 */
1561 	IEEE80211_ASSOCIATING_AUTHENTICATED,
1562 
1563 	/* the link is ok. the card associated to a BSS or linked
1564 	 * to a ibss cell or acting as an AP and creating the bss
1565 	 */
1566 	IEEE80211_LINKED,
1567 
1568 	/* same as LINKED, but the driver shall apply RX filter
1569 	 * rules as we are in NO_LINK mode. As the card is still
1570 	 * logically linked, but it is doing a syncro site survey
1571 	 * then it will be back to LINKED state.
1572 	 */
1573 	IEEE80211_LINKED_SCANNING,
1574 
1575 };
1576 
1577 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1578 #define DEFAULT_FTS 2346
1579 
1580 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1581 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1582 #define CFG_IEEE80211_RTS (1<<2)
1583 
1584 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1585 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1586 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1587 				  IEEE80211_24GHZ_MIN_CHANNEL + 1)
1588 
1589 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1590 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1591 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1592 				  IEEE80211_52GHZ_MIN_CHANNEL + 1)
1593 
1594 
1595 
1596 typedef struct tx_pending_t{
1597 	int frag;
1598 	struct ieee80211_txb *txb;
1599 }tx_pending_t;
1600 
1601 typedef struct _bandwidth_autoswitch {
1602 	long threshold_20Mhzto40Mhz;
1603 	long	threshold_40Mhzto20Mhz;
1604 	bool bforced_tx20Mhz;
1605 	bool bautoswitch_enable;
1606 } bandwidth_autoswitch, *pbandwidth_autoswitch;
1607 
1608 
1609 //added by amy for order
1610 
1611 #define REORDER_WIN_SIZE	128
1612 #define REORDER_ENTRY_NUM	128
1613 typedef struct _RX_REORDER_ENTRY {
1614 	struct list_head	List;
1615 	u16			SeqNum;
1616 	struct ieee80211_rxb *prxb;
1617 } RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
1618 //added by amy for order
1619 typedef enum _Fsync_State{
1620 	Default_Fsync,
1621 	HW_Fsync,
1622 	SW_Fsync
1623 }Fsync_State;
1624 
1625 // Power save mode configured.
1626 typedef	enum _RT_PS_MODE
1627 {
1628 	eActive,	// Active/Continuous access.
1629 	eMaxPs,		// Max power save mode.
1630 	eFastPs		// Fast power save mode.
1631 }RT_PS_MODE;
1632 
1633 typedef enum _IPS_CALLBACK_FUNCION
1634 {
1635 	IPS_CALLBACK_NONE = 0,
1636 	IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
1637 	IPS_CALLBACK_JOIN_REQUEST = 2,
1638 }IPS_CALLBACK_FUNCION;
1639 
1640 typedef enum _RT_JOIN_ACTION{
1641 	RT_JOIN_INFRA   = 1,
1642 	RT_JOIN_IBSS  = 2,
1643 	RT_START_IBSS = 3,
1644 	RT_NO_ACTION  = 4,
1645 }RT_JOIN_ACTION;
1646 
1647 typedef struct _IbssParms{
1648 	u16   atimWin;
1649 }IbssParms, *PIbssParms;
1650 #define MAX_NUM_RATES	264 // Max num of support rates element: 8,  Max num of ext. support rate: 255. 061122, by rcnjko.
1651 
1652 // RF state.
1653 typedef	enum _RT_RF_POWER_STATE {
1654 	eRfOn,
1655 	eRfSleep,
1656 	eRfOff
1657 }RT_RF_POWER_STATE;
1658 
1659 typedef struct _RT_POWER_SAVE_CONTROL {
1660 
1661 	//
1662 	// Inactive Power Save(IPS) : Disable RF when disconnected
1663 	//
1664 	bool				bInactivePs;
1665 	bool				bIPSModeBackup;
1666 	bool				bSwRfProcessing;
1667 	RT_RF_POWER_STATE	eInactivePowerState;
1668 	struct work_struct	InactivePsWorkItem;
1669 	struct timer_list	InactivePsTimer;
1670 
1671 	// Return point for join action
1672 	IPS_CALLBACK_FUNCION	ReturnPoint;
1673 
1674 	// Recored Parameters for rescheduled JoinRequest
1675 	bool				bTmpBssDesc;
1676 	RT_JOIN_ACTION		tmpJoinAction;
1677 	struct ieee80211_network tmpBssDesc;
1678 
1679 	// Recored Parameters for rescheduled MgntLinkRequest
1680 	bool				bTmpScanOnly;
1681 	bool				bTmpActiveScan;
1682 	bool				bTmpFilterHiddenAP;
1683 	bool				bTmpUpdateParms;
1684 	u8					tmpSsidBuf[33];
1685 	OCTET_STRING			tmpSsid2Scan;
1686 	bool				bTmpSsid2Scan;
1687 	u8					tmpNetworkType;
1688 	u8					tmpChannelNumber;
1689 	u16					tmpBcnPeriod;
1690 	u8					tmpDtimPeriod;
1691 	u16					tmpmCap;
1692 	OCTET_STRING			tmpSuppRateSet;
1693 	u8					tmpSuppRateBuf[MAX_NUM_RATES];
1694 	bool				bTmpSuppRate;
1695 	IbssParms				tmpIbpm;
1696 	bool				bTmpIbpm;
1697 
1698 	//
1699 	// Leisre Poswer Save : Disable RF if connected but traffic is not busy
1700 	//
1701 	bool				bLeisurePs;
1702 
1703 } RT_POWER_SAVE_CONTROL, *PRT_POWER_SAVE_CONTROL;
1704 
1705 typedef u32 RT_RF_CHANGE_SOURCE;
1706 #define RF_CHANGE_BY_SW BIT31
1707 #define RF_CHANGE_BY_HW BIT30
1708 #define RF_CHANGE_BY_PS BIT29
1709 #define RF_CHANGE_BY_IPS BIT28
1710 #define RF_CHANGE_BY_INIT	0	// Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1711 
1712 typedef enum
1713 {
1714 	COUNTRY_CODE_FCC = 0,
1715 	COUNTRY_CODE_IC = 1,
1716 	COUNTRY_CODE_ETSI = 2,
1717 	COUNTRY_CODE_SPAIN = 3,
1718 	COUNTRY_CODE_FRANCE = 4,
1719 	COUNTRY_CODE_MKK = 5,
1720 	COUNTRY_CODE_MKK1 = 6,
1721 	COUNTRY_CODE_ISRAEL = 7,
1722 	COUNTRY_CODE_TELEC,
1723 	COUNTRY_CODE_MIC,
1724 	COUNTRY_CODE_GLOBAL_DOMAIN
1725 }country_code_type_t;
1726 
1727 #define RT_MAX_LD_SLOT_NUM	10
1728 typedef struct _RT_LINK_DETECT_T{
1729 
1730 	u32				NumRecvBcnInPeriod;
1731 	u32				NumRecvDataInPeriod;
1732 
1733 	u32				RxBcnNum[RT_MAX_LD_SLOT_NUM];	// number of Rx beacon / CheckForHang_period  to determine link status
1734 	u32				RxDataNum[RT_MAX_LD_SLOT_NUM];	// number of Rx data / CheckForHang_period  to determine link status
1735 	u16				SlotNum;	// number of CheckForHang period to determine link status
1736 	u16				SlotIndex;
1737 
1738 	u32				NumTxOkInPeriod;
1739 	u32				NumRxOkInPeriod;
1740 	bool				bBusyTraffic;
1741 }RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
1742 
1743 
1744 struct ieee80211_device {
1745 	struct net_device *dev;
1746 	struct ieee80211_security sec;
1747 
1748 	//hw security related
1749 //	u8 hwsec_support; //support?
1750 	u8 hwsec_active;  //hw security active.
1751 	bool is_silent_reset;
1752 	bool ieee_up;
1753 	//added by amy
1754 	bool bSupportRemoteWakeUp;
1755 	RT_PS_MODE	dot11PowerSaveMode; // Power save mode configured.
1756 	bool actscanning;
1757 	bool beinretry;
1758 	RT_RF_POWER_STATE		eRFPowerState;
1759 	RT_RF_CHANGE_SOURCE	RfOffReason;
1760 	bool is_set_key;
1761 	//11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1762 
1763 	//11n HT below
1764 	PRT_HIGH_THROUGHPUT	pHTInfo;
1765 	//struct timer_list		SwBwTimer;
1766 //	spinlock_t chnlop_spinlock;
1767 	spinlock_t bw_spinlock;
1768 
1769 	spinlock_t reorder_spinlock;
1770 	// for HT operation rate set.  we use this one for HT data rate to separate different descriptors
1771 	//the way fill this is the same as in the IE
1772 	u8	Regdot11HTOperationalRateSet[16];		//use RATR format
1773 	u8	dot11HTOperationalRateSet[16];		//use RATR format
1774 	u8	RegHTSuppRateSet[16];
1775 	u8				HTCurrentOperaRate;
1776 	u8				HTHighestOperaRate;
1777 	//wb added for rate operation mode to firmware
1778 	u8	bTxDisableRateFallBack;
1779 	u8	bTxUseDriverAssingedRate;
1780 	atomic_t	atm_chnlop;
1781 	atomic_t	atm_swbw;
1782 //	u8	HTHighestOperaRate;
1783 //	u8	HTCurrentOperaRate;
1784 
1785 	// 802.11e and WMM Traffic Stream Info (TX)
1786 	struct list_head		Tx_TS_Admit_List;
1787 	struct list_head		Tx_TS_Pending_List;
1788 	struct list_head		Tx_TS_Unused_List;
1789 	TX_TS_RECORD		TxTsRecord[TOTAL_TS_NUM];
1790 	// 802.11e and WMM Traffic Stream Info (RX)
1791 	struct list_head		Rx_TS_Admit_List;
1792 	struct list_head		Rx_TS_Pending_List;
1793 	struct list_head		Rx_TS_Unused_List;
1794 	RX_TS_RECORD		RxTsRecord[TOTAL_TS_NUM];
1795 //#ifdef TO_DO_LIST
1796 	RX_REORDER_ENTRY	RxReorderEntry[128];
1797 	struct list_head		RxReorder_Unused_List;
1798 //#endif
1799 	// Qos related. Added by Annie, 2005-11-01.
1800 //	PSTA_QOS			pStaQos;
1801 	u8				ForcedPriority;		// Force per-packet priority 1~7. (default: 0, not to force it.)
1802 
1803 
1804 	/* Bookkeeping structures */
1805 	struct net_device_stats stats;
1806 	struct ieee80211_stats ieee_stats;
1807 	struct ieee80211_softmac_stats softmac_stats;
1808 
1809 	/* Probe / Beacon management */
1810 	struct list_head network_free_list;
1811 	struct list_head network_list;
1812 	struct ieee80211_network *networks;
1813 	int scans;
1814 	int scan_age;
1815 
1816 	int iw_mode; /* operating mode (IW_MODE_*) */
1817 	struct iw_spy_data spy_data;
1818 
1819 	spinlock_t lock;
1820 	spinlock_t wpax_suitlist_lock;
1821 
1822 	int tx_headroom; /* Set to size of any additional room needed at front
1823 			  * of allocated Tx SKBs */
1824 	u32 config;
1825 
1826 	/* WEP and other encryption related settings at the device level */
1827 	int open_wep; /* Set to 1 to allow unencrypted frames */
1828 	int auth_mode;
1829 	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
1830 				 * WEP key changes */
1831 
1832 	/* If the host performs {en,de}cryption, then set to 1 */
1833 	int host_encrypt;
1834 	int host_encrypt_msdu;
1835 	int host_decrypt;
1836 	/* host performs multicast decryption */
1837 	int host_mc_decrypt;
1838 
1839 	/* host should strip IV and ICV from protected frames */
1840 	/* meaningful only when hardware decryption is being used */
1841 	int host_strip_iv_icv;
1842 
1843 	int host_open_frag;
1844 	int host_build_iv;
1845 	int ieee802_1x; /* is IEEE 802.1X used */
1846 
1847 	/* WPA data */
1848 	bool bHalfWirelessN24GMode;
1849 	int wpa_enabled;
1850 	int drop_unencrypted;
1851 	int tkip_countermeasures;
1852 	int privacy_invoked;
1853 	size_t wpa_ie_len;
1854 	u8 *wpa_ie;
1855 	u8 ap_mac_addr[6];
1856 	u16 pairwise_key_type;
1857 	u16 group_key_type;
1858 	struct list_head crypt_deinit_list;
1859 	struct ieee80211_crypt_data *crypt[WEP_KEYS];
1860 	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
1861 	struct timer_list crypt_deinit_timer;
1862 	int crypt_quiesced;
1863 
1864 	int bcrx_sta_key; /* use individual keys to override default keys even
1865 			   * with RX of broad/multicast frames */
1866 
1867 	/* Fragmentation structures */
1868 	// each streaming contain a entry
1869 	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
1870 	unsigned int frag_next_idx[17];
1871 	u16 fts; /* Fragmentation Threshold */
1872 #define DEFAULT_RTS_THRESHOLD 2346U
1873 #define MIN_RTS_THRESHOLD 1
1874 #define MAX_RTS_THRESHOLD 2346U
1875 	u16 rts; /* RTS threshold */
1876 
1877 	/* Association info */
1878 	u8 bssid[ETH_ALEN];
1879 
1880 	/* This stores infos for the current network.
1881 	 * Either the network we are associated in INFRASTRUCTURE
1882 	 * or the network that we are creating in MASTER mode.
1883 	 * ad-hoc is a mixture ;-).
1884 	 * Note that in infrastructure mode, even when not associated,
1885 	 * fields bssid and essid may be valid (if wpa_set and essid_set
1886 	 * are true) as thy carry the value set by the user via iwconfig
1887 	 */
1888 	struct ieee80211_network current_network;
1889 
1890 	enum ieee80211_state state;
1891 
1892 	int short_slot;
1893 	int reg_mode;
1894 	int mode;       /* A, B, G */
1895 	int modulation; /* CCK, OFDM */
1896 	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
1897 	int abg_true;   /* ABG flag              */
1898 
1899 	/* used for forcing the ibss workqueue to terminate
1900 	 * without wait for the syncro scan to terminate
1901 	 */
1902 	short sync_scan_hurryup;
1903 
1904 	int perfect_rssi;
1905 	int worst_rssi;
1906 
1907 	u16 prev_seq_ctl;       /* used to drop duplicate frames */
1908 
1909 	/* map of allowed channels. 0 is dummy */
1910 	// FIXME: remember to default to a basic channel plan depending of the PHY type
1911 	void *pDot11dInfo;
1912 	bool bGlobalDomain;
1913 	int rate;       /* current rate */
1914 	int basic_rate;
1915 	//FIXME: pleace callback, see if redundant with softmac_features
1916 	short active_scan;
1917 
1918 	/* this contains flags for selectively enable softmac support */
1919 	u16 softmac_features;
1920 
1921 	/* if the sequence control field is not filled by HW */
1922 	u16 seq_ctrl[5];
1923 
1924 	/* association procedure transaction sequence number */
1925 	u16 associate_seq;
1926 
1927 	/* AID for RTXed association responses */
1928 	u16 assoc_id;
1929 
1930 	/* power save mode related*/
1931 	short ps;
1932 	short sta_sleep;
1933 	int ps_timeout;
1934 	int ps_period;
1935 	struct tasklet_struct ps_task;
1936 	u32 ps_th;
1937 	u32 ps_tl;
1938 
1939 	short raw_tx;
1940 	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
1941 	short queue_stop;
1942 	short scanning;
1943 	short proto_started;
1944 
1945 	struct semaphore wx_sem;
1946 	struct semaphore scan_sem;
1947 
1948 	spinlock_t mgmt_tx_lock;
1949 	spinlock_t beacon_lock;
1950 
1951 	short beacon_txing;
1952 
1953 	short wap_set;
1954 	short ssid_set;
1955 
1956 	u8  wpax_type_set;    //{added by David, 2006.9.28}
1957 	u32 wpax_type_notify; //{added by David, 2006.9.26}
1958 
1959 	/* QoS related flag */
1960 	char init_wmmparam_flag;
1961 	/* set on initialization */
1962 	u8  qos_support;
1963 
1964 	/* for discarding duplicated packets in IBSS */
1965 	struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
1966 
1967 	/* for discarding duplicated packets in BSS */
1968 	u16 last_rxseq_num[17]; /* rx seq previous per-tid */
1969 	u16 last_rxfrag_num[17];/* tx frag previous per-tid */
1970 	unsigned long last_packet_time[17];
1971 
1972 	/* for PS mode */
1973 	unsigned long last_rx_ps_time;
1974 
1975 	/* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
1976 	struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
1977 	int mgmt_queue_head;
1978 	int mgmt_queue_tail;
1979 //{ added for rtl819x
1980 #define IEEE80211_QUEUE_LIMIT 128
1981 	u8 AsocRetryCount;
1982 	unsigned int hw_header;
1983 	struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
1984 	struct sk_buff_head  skb_aggQ[MAX_QUEUE_SIZE];
1985 	struct sk_buff_head  skb_drv_aggQ[MAX_QUEUE_SIZE];
1986 	u32	sta_edca_param[4];
1987 	bool aggregation;
1988 	// Enable/Disable Rx immediate BA capability.
1989 	bool enable_rx_imm_BA;
1990 	bool bibsscoordinator;
1991 
1992 	//+by amy for DM ,080515
1993 	//Dynamic Tx power for near/far range enable/Disable  , by amy , 2008-05-15
1994 	bool	bdynamic_txpower_enable;
1995 
1996 	bool bCTSToSelfEnable;
1997 	u8	CTSToSelfTH;
1998 
1999 	u32	fsync_time_interval;
2000 	u32	fsync_rate_bitmap;
2001 	u8	fsync_rssi_threshold;
2002 	bool	bfsync_enable;
2003 
2004 	u8	fsync_multiple_timeinterval;		// FsyncMultipleTimeInterval * FsyncTimeInterval
2005 	u32	fsync_firstdiff_ratethreshold;		// low threshold
2006 	u32	fsync_seconddiff_ratethreshold;	 // decrease threshold
2007 	Fsync_State			fsync_state;
2008 	bool		bis_any_nonbepkts;
2009 	//20Mhz 40Mhz AutoSwitch Threshold
2010 	bandwidth_autoswitch bandwidth_auto_switch;
2011 	//for txpower tracking
2012 	bool FwRWRF;
2013 
2014 	//added by amy for AP roaming
2015 	RT_LINK_DETECT_T	LinkDetectInfo;
2016 	//added by amy for ps
2017 	RT_POWER_SAVE_CONTROL	PowerSaveControl;
2018 //}
2019 	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
2020 	struct  tx_pending_t tx_pending;
2021 
2022 	/* used if IEEE_SOFTMAC_ASSOCIATE is set */
2023 	struct timer_list associate_timer;
2024 
2025 	/* used if IEEE_SOFTMAC_BEACONS is set */
2026 	struct timer_list beacon_timer;
2027 	struct work_struct associate_complete_wq;
2028 	struct work_struct associate_procedure_wq;
2029 	struct delayed_work softmac_scan_wq;
2030 	struct delayed_work associate_retry_wq;
2031 	 struct delayed_work start_ibss_wq;
2032 	struct work_struct wx_sync_scan_wq;
2033 	struct workqueue_struct *wq;
2034 	// Qos related. Added by Annie, 2005-11-01.
2035 	//STA_QOS  StaQos;
2036 
2037 	//u32 STA_EDCA_PARAM[4];
2038 	//CHANNEL_ACCESS_SETTING ChannelAccessSetting;
2039 
2040 
2041 	/* Callback functions */
2042 	void (*set_security)(struct net_device *dev,
2043 			     struct ieee80211_security *sec);
2044 
2045 	/* Used to TX data frame by using txb structs.
2046 	 * this is not used if in the softmac_features
2047 	 * is set the flag IEEE_SOFTMAC_TX_QUEUE
2048 	 */
2049 	int (*hard_start_xmit)(struct ieee80211_txb *txb,
2050 			       struct net_device *dev);
2051 
2052 	int (*reset_port)(struct net_device *dev);
2053 	int (*is_queue_full) (struct net_device *dev, int pri);
2054 
2055 	int (*handle_management) (struct net_device *dev,
2056 				  struct ieee80211_network *network, u16 type);
2057 	int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
2058 
2059 	/* Softmac-generated frames (management) are TXed via this
2060 	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
2061 	 * not set. As some cards may have different HW queues that
2062 	 * one might want to use for data and management frames
2063 	 * the option to have two callbacks might be useful.
2064 	 * This function can't sleep.
2065 	 */
2066 	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
2067 			       struct net_device *dev);
2068 
2069 	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
2070 	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
2071 	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
2072 	 * then also management frames are sent via this callback.
2073 	 * This function can't sleep.
2074 	 */
2075 	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
2076 			       struct net_device *dev, int rate);
2077 
2078 	/* stops the HW queue for DATA frames. Useful to avoid
2079 	 * waste time to TX data frame when we are reassociating
2080 	 * This function can sleep.
2081 	 */
2082 	void (*data_hard_stop)(struct net_device *dev);
2083 
2084 	/* OK this is complementar to data_poll_hard_stop */
2085 	void (*data_hard_resume)(struct net_device *dev);
2086 
2087 	/* ask to the driver to retune the radio .
2088 	 * This function can sleep. the driver should ensure
2089 	 * the radio has been swithced before return.
2090 	 */
2091 	void (*set_chan)(struct net_device *dev, short ch);
2092 
2093 	/* These are not used if the ieee stack takes care of
2094 	 * scanning (IEEE_SOFTMAC_SCAN feature set).
2095 	 * In this case only the set_chan is used.
2096 	 *
2097 	 * The syncro version is similar to the start_scan but
2098 	 * does not return until all channels has been scanned.
2099 	 * this is called in user context and should sleep,
2100 	 * it is called in a work_queue when swithcing to ad-hoc mode
2101 	 * or in behalf of iwlist scan when the card is associated
2102 	 * and root user ask for a scan.
2103 	 * the function stop_scan should stop both the syncro and
2104 	 * background scanning and can sleep.
2105 	 * The function start_scan should initiate the background
2106 	 * scanning and can't sleep.
2107 	 */
2108 	void (*scan_syncro)(struct net_device *dev);
2109 	void (*start_scan)(struct net_device *dev);
2110 	void (*stop_scan)(struct net_device *dev);
2111 
2112 	/* indicate the driver that the link state is changed
2113 	 * for example it may indicate the card is associated now.
2114 	 * Driver might be interested in this to apply RX filter
2115 	 * rules or simply light the LINK led
2116 	 */
2117 	void (*link_change)(struct net_device *dev);
2118 
2119 	/* these two function indicates to the HW when to start
2120 	 * and stop to send beacons. This is used when the
2121 	 * IEEE_SOFTMAC_BEACONS is not set. For now the
2122 	 * stop_send_bacons is NOT guaranteed to be called only
2123 	 * after start_send_beacons.
2124 	 */
2125 	void (*start_send_beacons) (struct net_device *dev,u16 tx_rate);
2126 	void (*stop_send_beacons) (struct net_device *dev);
2127 
2128 	/* power save mode related */
2129 	void (*sta_wake_up) (struct net_device *dev);
2130 	void (*ps_request_tx_ack) (struct net_device *dev);
2131 	void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
2132 	short (*ps_is_queue_empty) (struct net_device *dev);
2133 	int (*handle_beacon) (struct net_device *dev, struct ieee80211_beacon *beacon, struct ieee80211_network *network);
2134 	int (*handle_assoc_response) (struct net_device *dev, struct ieee80211_assoc_response_frame *resp, struct ieee80211_network *network);
2135 
2136 
2137 	/* check whether Tx hw resource available */
2138 	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
2139 	//added by wb for HT related
2140 //	void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2141 	void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
2142 //	void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2143 	bool (*GetNmodeSupportBySecCfg)(struct net_device *dev);
2144 	void (*SetWirelessMode)(struct net_device *dev, u8 wireless_mode);
2145 	bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device *dev);
2146 	void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
2147 
2148 	/* This must be the last item so that it points to the data
2149 	 * allocated beyond this structure by alloc_ieee80211 */
2150 	u8 priv[0];
2151 };
2152 
2153 #define IEEE_A            (1<<0)
2154 #define IEEE_B            (1<<1)
2155 #define IEEE_G            (1<<2)
2156 #define IEEE_N_24G		  (1<<4)
2157 #define	IEEE_N_5G		  (1<<5)
2158 #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
2159 
2160 /* Generate a 802.11 header */
2161 
2162 /* Uses the channel change callback directly
2163  * instead of [start/stop] scan callbacks
2164  */
2165 #define IEEE_SOFTMAC_SCAN (1<<2)
2166 
2167 /* Perform authentication and association handshake */
2168 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2169 
2170 /* Generate probe requests */
2171 #define IEEE_SOFTMAC_PROBERQ (1<<4)
2172 
2173 /* Generate respones to probe requests */
2174 #define IEEE_SOFTMAC_PROBERS (1<<5)
2175 
2176 /* The ieee802.11 stack will manages the netif queue
2177  * wake/stop for the driver, taking care of 802.11
2178  * fragmentation. See softmac.c for details. */
2179 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2180 
2181 /* Uses only the softmac_data_hard_start_xmit
2182  * even for TX management frames.
2183  */
2184 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2185 
2186 /* Generate beacons.  The stack will enqueue beacons
2187  * to the card
2188  */
2189 #define IEEE_SOFTMAC_BEACONS (1<<6)
2190 
ieee80211_priv(struct net_device * dev)2191 static inline void *ieee80211_priv(struct net_device *dev)
2192 {
2193 	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
2194 }
2195 
ieee80211_is_empty_essid(const char * essid,int essid_len)2196 static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
2197 {
2198 	/* Single white space is for Linksys APs */
2199 	if (essid_len == 1 && essid[0] == ' ')
2200 		return 1;
2201 
2202 	/* Otherwise, if the entire essid is 0, we assume it is hidden */
2203 	while (essid_len) {
2204 		essid_len--;
2205 		if (essid[essid_len] != '\0')
2206 			return 0;
2207 	}
2208 
2209 	return 1;
2210 }
2211 
ieee80211_is_valid_mode(struct ieee80211_device * ieee,int mode)2212 static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
2213 {
2214 	/*
2215 	 * It is possible for both access points and our device to support
2216 	 * combinations of modes, so as long as there is one valid combination
2217 	 * of ap/device supported modes, then return success
2218 	 *
2219 	 */
2220 	if ((mode & IEEE_A) &&
2221 	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2222 	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
2223 		return 1;
2224 
2225 	if ((mode & IEEE_G) &&
2226 	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
2227 	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
2228 		return 1;
2229 
2230 	if ((mode & IEEE_B) &&
2231 	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
2232 	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
2233 		return 1;
2234 
2235 	return 0;
2236 }
2237 
ieee80211_get_hdrlen(u16 fc)2238 static inline int ieee80211_get_hdrlen(u16 fc)
2239 {
2240 	int hdrlen = IEEE80211_3ADDR_LEN;
2241 
2242 	switch (WLAN_FC_GET_TYPE(fc)) {
2243 	case IEEE80211_FTYPE_DATA:
2244 		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
2245 			hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
2246 		if(IEEE80211_QOS_HAS_SEQ(fc))
2247 			hdrlen += 2; /* QOS ctrl*/
2248 		break;
2249 	case IEEE80211_FTYPE_CTL:
2250 		switch (WLAN_FC_GET_STYPE(fc)) {
2251 		case IEEE80211_STYPE_CTS:
2252 		case IEEE80211_STYPE_ACK:
2253 			hdrlen = IEEE80211_1ADDR_LEN;
2254 			break;
2255 		default:
2256 			hdrlen = IEEE80211_2ADDR_LEN;
2257 			break;
2258 		}
2259 		break;
2260 	}
2261 
2262 	return hdrlen;
2263 }
2264 
ieee80211_get_payload(struct ieee80211_hdr * hdr)2265 static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
2266 {
2267 	switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
2268 	case IEEE80211_1ADDR_LEN:
2269 		return ((struct ieee80211_hdr_1addr *)hdr)->payload;
2270 	case IEEE80211_2ADDR_LEN:
2271 		return ((struct ieee80211_hdr_2addr *)hdr)->payload;
2272 	case IEEE80211_3ADDR_LEN:
2273 		return ((struct ieee80211_hdr_3addr *)hdr)->payload;
2274 	case IEEE80211_4ADDR_LEN:
2275 		return ((struct ieee80211_hdr_4addr *)hdr)->payload;
2276 	}
2277 	return NULL;
2278 }
2279 
ieee80211_is_ofdm_rate(u8 rate)2280 static inline int ieee80211_is_ofdm_rate(u8 rate)
2281 {
2282 	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2283 	case IEEE80211_OFDM_RATE_6MB:
2284 	case IEEE80211_OFDM_RATE_9MB:
2285 	case IEEE80211_OFDM_RATE_12MB:
2286 	case IEEE80211_OFDM_RATE_18MB:
2287 	case IEEE80211_OFDM_RATE_24MB:
2288 	case IEEE80211_OFDM_RATE_36MB:
2289 	case IEEE80211_OFDM_RATE_48MB:
2290 	case IEEE80211_OFDM_RATE_54MB:
2291 		return 1;
2292 	}
2293 	return 0;
2294 }
2295 
ieee80211_is_cck_rate(u8 rate)2296 static inline int ieee80211_is_cck_rate(u8 rate)
2297 {
2298 	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
2299 	case IEEE80211_CCK_RATE_1MB:
2300 	case IEEE80211_CCK_RATE_2MB:
2301 	case IEEE80211_CCK_RATE_5MB:
2302 	case IEEE80211_CCK_RATE_11MB:
2303 		return 1;
2304 	}
2305 	return 0;
2306 }
2307 
2308 
2309 /* ieee80211.c */
2310 extern void free_ieee80211(struct net_device *dev);
2311 extern struct net_device *alloc_ieee80211(int sizeof_priv);
2312 
2313 extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
2314 
2315 /* ieee80211_tx.c */
2316 
2317 extern int ieee80211_encrypt_fragment(
2318 	struct ieee80211_device *ieee,
2319 	struct sk_buff *frag,
2320 	int hdr_len);
2321 
2322 extern int ieee80211_xmit(struct sk_buff *skb,
2323 			  struct net_device *dev);
2324 extern void ieee80211_txb_free(struct ieee80211_txb *);
2325 
2326 
2327 /* ieee80211_rx.c */
2328 extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
2329 			struct ieee80211_rx_stats *rx_stats);
2330 extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
2331 			     struct ieee80211_hdr_4addr *header,
2332 			     struct ieee80211_rx_stats *stats);
2333 
2334 /* ieee80211_wx.c */
2335 extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
2336 				 struct iw_request_info *info,
2337 				 union iwreq_data *wrqu, char *key);
2338 extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
2339 				   struct iw_request_info *info,
2340 				   union iwreq_data *wrqu, char *key);
2341 extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
2342 				   struct iw_request_info *info,
2343 				   union iwreq_data *wrqu, char *key);
2344 extern int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
2345 			    struct iw_request_info *info,
2346 			    union iwreq_data *wrqu, char *extra);
2347 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
2348 			    struct iw_request_info *info,
2349 			    union iwreq_data *wrqu, char *extra);
2350 extern int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
2351 			       struct iw_request_info *info,
2352 			       struct iw_param *data, char *extra);
2353 extern int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
2354 			       struct iw_request_info *info,
2355 			       union iwreq_data *wrqu, char *extra);
2356 extern int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
2357 
2358 /* ieee80211_softmac.c */
2359 extern short ieee80211_is_54g(const struct ieee80211_network *net);
2360 extern short ieee80211_is_shortslot(const struct ieee80211_network *net);
2361 extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
2362 			struct ieee80211_rx_stats *rx_stats, u16 type,
2363 			u16 stype);
2364 extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net);
2365 
2366 void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta, u8 asRsn);
2367 extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee);
2368 
2369 extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2370 extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
2371 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
2372 extern void ieee80211_start_bss(struct ieee80211_device *ieee);
2373 extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
2374 extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
2375 extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
2376 extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
2377 extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
2378 extern void ieee80211_disassociate(struct ieee80211_device *ieee);
2379 extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
2380 extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
2381 extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
2382 extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
2383 extern void ieee80211_stop_protocol(struct ieee80211_device *ieee);
2384 extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
2385 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
2386 extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
2387 extern void ieee80211_wake_queue(struct ieee80211_device *ieee);
2388 extern void ieee80211_stop_queue(struct ieee80211_device *ieee);
2389 extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
2390 extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
2391 extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
2392 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p);
2393 extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
2394 extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
2395 
2396 extern void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee);
2397 
2398 /* ieee80211_crypt_ccmp&tkip&wep.c */
2399 extern void ieee80211_tkip_null(void);
2400 extern void ieee80211_wep_null(void);
2401 extern void ieee80211_ccmp_null(void);
2402 
2403 int ieee80211_crypto_init(void);
2404 void ieee80211_crypto_deinit(void);
2405 int ieee80211_crypto_tkip_init(void);
2406 void ieee80211_crypto_tkip_exit(void);
2407 int ieee80211_crypto_ccmp_init(void);
2408 void ieee80211_crypto_ccmp_exit(void);
2409 int ieee80211_crypto_wep_init(void);
2410 void ieee80211_crypto_wep_exit(void);
2411 
2412 /* ieee80211_softmac_wx.c */
2413 
2414 extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
2415 			    struct iw_request_info *info,
2416 			    union iwreq_data *wrqu, char *ext);
2417 
2418 extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
2419 			 struct iw_request_info *info,
2420 			 union iwreq_data *awrq,
2421 			 char *extra);
2422 
2423 extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b);
2424 
2425 extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
2426 			     struct iw_request_info *info,
2427 			     union iwreq_data *wrqu, char *extra);
2428 
2429 extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
2430 			     struct iw_request_info *info,
2431 			     union iwreq_data *wrqu, char *extra);
2432 
2433 extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
2434 			     union iwreq_data *wrqu, char *b);
2435 
2436 extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
2437 			     union iwreq_data *wrqu, char *b);
2438 
2439 extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
2440 			      struct iw_request_info *a,
2441 			      union iwreq_data *wrqu, char *extra);
2442 
2443 extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
2444 			     union iwreq_data *wrqu, char *b);
2445 
2446 extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
2447 			     union iwreq_data *wrqu, char *b);
2448 
2449 extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
2450 			     union iwreq_data *wrqu, char *b);
2451 
2452 /* ieee80211_module.c */
2453 extern int ieee80211_debug_init(void);
2454 extern void ieee80211_debug_exit(void);
2455 
2456 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2457 extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
2458 
2459 
2460 extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
2461 			       struct iw_request_info *info,
2462 			       union iwreq_data *wrqu, char *extra);
2463 
2464 extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
2465 			     struct iw_request_info *info,
2466 			     union iwreq_data *wrqu, char *extra);
2467 
2468 extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
2469 				 struct iw_request_info *info,
2470 				 union iwreq_data *wrqu, char *extra);
2471 
2472 extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
2473 				 struct iw_request_info *info,
2474 				 union iwreq_data *wrqu, char *extra);
2475 
2476 extern int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
2477 			     struct iw_request_info *info,
2478 			     union iwreq_data *wrqu, char *extra);
2479 
2480 extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
2481 			     struct iw_request_info *info,
2482 			     union iwreq_data *wrqu, char *extra);
2483 //HT
2484 #define MAX_RECEIVE_BUFFER_SIZE 9100  //
2485 extern void HTDebugHTCapability(u8 *CapIE, u8 *TitleString );
2486 extern void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
2487 
2488 void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET    Offset);
2489 extern void HTUpdateDefaultSetting(struct ieee80211_device *ieee);
2490 extern void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u8 *len, u8 isEncrypt);
2491 extern void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 isEncrypt);
2492 extern void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len);
2493 extern void HTOnAssocRsp(struct ieee80211_device *ieee);
2494 extern void HTInitializeHTInfo(struct ieee80211_device *ieee);
2495 extern void HTInitializeBssDesc(PBSS_HT pBssHT);
2496 extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork);
2497 extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee,   struct ieee80211_network *pNetwork);
2498 extern u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSFilter);
2499 extern u8 MCS_FILTER_ALL[];
2500 extern u16 MCS_DATA_RATE[2][2][77] ;
2501 extern u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame);
2502 //extern void HTSetConnectBwModeCallback(unsigned long data);
2503 extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT  pHTInfo);
2504 extern bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee);
2505 extern u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee,  u8      nMcsRate);
2506 extern u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
2507 extern u16  TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate);
2508 //function in BAPROC.c
2509 extern int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee,
2510 				 struct sk_buff *skb);
2511 extern int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee,
2512 				 struct sk_buff *skb);
2513 extern int ieee80211_rx_DELBA(struct ieee80211_device *ieee,struct sk_buff *skb);
2514 extern void TsInitAddBA(struct ieee80211_device *ieee, PTX_TS_RECORD pTS,
2515 			u8 Policy, u8 bOverwritePending);
2516 extern void TsInitDelBA(struct ieee80211_device *ieee,
2517 			PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
2518 extern void BaSetupTimeOut(unsigned long data);
2519 extern void TxBaInactTimeout(unsigned long data);
2520 extern void RxBaInactTimeout(unsigned long data);
2521 extern void ResetBaEntry(PBA_RECORD pBA);
2522 //function in TS.c
2523 extern bool GetTs(
2524 	struct ieee80211_device		*ieee,
2525 	PTS_COMMON_INFO                 *ppTS,
2526 	u8                              *Addr,
2527 	u8                              TID,
2528 	TR_SELECT                       TxRxSelect,  //Rx:1, Tx:0
2529 	bool                            bAddNewTs
2530 	);
2531 extern void TSInitialize(struct ieee80211_device *ieee);
2532 extern  void TsStartAddBaProcess(struct ieee80211_device *ieee, PTX_TS_RECORD   pTxTS);
2533 extern void RemovePeerTS(struct ieee80211_device *ieee, u8 *Addr);
2534 extern void RemoveAllTS(struct ieee80211_device *ieee);
2535 void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
2536 
2537 extern const long ieee80211_wlan_frequencies[];
2538 
ieee80211_increment_scans(struct ieee80211_device * ieee)2539 static inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
2540 {
2541 	ieee->scans++;
2542 }
2543 
ieee80211_get_scans(struct ieee80211_device * ieee)2544 static inline int ieee80211_get_scans(struct ieee80211_device *ieee)
2545 {
2546 	return ieee->scans;
2547 }
2548 
escape_essid(const char * essid,u8 essid_len)2549 static inline const char *escape_essid(const char *essid, u8 essid_len) {
2550 	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
2551 
2552 	if (ieee80211_is_empty_essid(essid, essid_len)) {
2553 		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
2554 		return escaped;
2555 	}
2556 
2557 	snprintf(escaped, sizeof(escaped), "%*pEn", essid_len, essid);
2558 	return escaped;
2559 }
2560 
2561 /* For the function is more related to hardware setting, it's better to use the
2562  * ieee handler to refer to it.
2563  */
2564 extern short check_nic_enough_desc(struct net_device *dev, int queue_index);
2565 extern int ieee80211_data_xmit(struct sk_buff *skb, struct net_device *dev);
2566 extern int ieee80211_parse_info_param(struct ieee80211_device *ieee,
2567 		struct ieee80211_info_element *info_element,
2568 		u16 length,
2569 		struct ieee80211_network *network,
2570 		struct ieee80211_rx_stats *stats);
2571 
2572 void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb **prxbIndicateArray,u8  index);
2573 #define RT_ASOC_RETRY_LIMIT	5
2574 #endif /* IEEE80211_H */
2575