/******************************************************************************* * * Intel Ethernet Controller XL710 Family Linux Driver * Copyright(c) 2013 - 2014 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along * with this program. If not, see . * * The full GNU General Public License is included in this distribution in * the file called "COPYING". * * Contact Information: * e1000-devel Mailing List * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * ******************************************************************************/ #include "i40e.h" #include /* The XL710 timesync is very much like Intel's 82599 design when it comes to * the fundamental clock design. However, the clock operations are much simpler * in the XL710 because the device supports a full 64 bits of nanoseconds. * Because the field is so wide, we can forgo the cycle counter and just * operate with the nanosecond field directly without fear of overflow. * * Much like the 82599, the update period is dependent upon the link speed: * At 40Gb link or no link, the period is 1.6ns. * At 10Gb link, the period is multiplied by 2. (3.2ns) * At 1Gb link, the period is multiplied by 20. (32ns) * 1588 functionality is not supported at 100Mbps. */ #define I40E_PTP_40GB_INCVAL 0x0199999999ULL #define I40E_PTP_10GB_INCVAL 0x0333333333ULL #define I40E_PTP_1GB_INCVAL 0x2000000000ULL #define I40E_PRTTSYN_CTL1_TSYNTYPE_V1 (0x1 << \ I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT) #define I40E_PRTTSYN_CTL1_TSYNTYPE_V2 (0x2 << \ I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT) /** * i40e_ptp_read - Read the PHC time from the device * @pf: Board private structure * @ts: timespec structure to hold the current time value * * This function reads the PRTTSYN_TIME registers and stores them in a * timespec. However, since the registers are 64 bits of nanoseconds, we must * convert the result to a timespec before we can return. **/ static void i40e_ptp_read(struct i40e_pf *pf, struct timespec64 *ts) { struct i40e_hw *hw = &pf->hw; u32 hi, lo; u64 ns; /* The timer latches on the lowest register read. */ lo = rd32(hw, I40E_PRTTSYN_TIME_L); hi = rd32(hw, I40E_PRTTSYN_TIME_H); ns = (((u64)hi) << 32) | lo; *ts = ns_to_timespec64(ns); } /** * i40e_ptp_write - Write the PHC time to the device * @pf: Board private structure * @ts: timespec structure that holds the new time value * * This function writes the PRTTSYN_TIME registers with the user value. Since * we receive a timespec from the stack, we must convert that timespec into * nanoseconds before programming the registers. **/ static void i40e_ptp_write(struct i40e_pf *pf, const struct timespec64 *ts) { struct i40e_hw *hw = &pf->hw; u64 ns = timespec64_to_ns(ts); /* The timer will not update until the high register is written, so * write the low register first. */ wr32(hw, I40E_PRTTSYN_TIME_L, ns & 0xFFFFFFFF); wr32(hw, I40E_PRTTSYN_TIME_H, ns >> 32); } /** * i40e_ptp_convert_to_hwtstamp - Convert device clock to system time * @hwtstamps: Timestamp structure to update * @timestamp: Timestamp from the hardware * * We need to convert the NIC clock value into a hwtstamp which can be used by * the upper level timestamping functions. Since the timestamp is simply a 64- * bit nanosecond value, we can call ns_to_ktime directly to handle this. **/ static void i40e_ptp_convert_to_hwtstamp(struct skb_shared_hwtstamps *hwtstamps, u64 timestamp) { memset(hwtstamps, 0, sizeof(*hwtstamps)); hwtstamps->hwtstamp = ns_to_ktime(timestamp); } /** * i40e_ptp_adjfreq - Adjust the PHC frequency * @ptp: The PTP clock structure * @ppb: Parts per billion adjustment from the base * * Adjust the frequency of the PHC by the indicated parts per billion from the * base frequency. **/ static int i40e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) { struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); struct i40e_hw *hw = &pf->hw; u64 adj, freq, diff; int neg_adj = 0; if (ppb < 0) { neg_adj = 1; ppb = -ppb; } smp_mb(); /* Force any pending update before accessing. */ adj = ACCESS_ONCE(pf->ptp_base_adj); freq = adj; freq *= ppb; diff = div_u64(freq, 1000000000ULL); if (neg_adj) adj -= diff; else adj += diff; wr32(hw, I40E_PRTTSYN_INC_L, adj & 0xFFFFFFFF); wr32(hw, I40E_PRTTSYN_INC_H, adj >> 32); return 0; } /** * i40e_ptp_adjtime - Adjust the PHC time * @ptp: The PTP clock structure * @delta: Offset in nanoseconds to adjust the PHC time by * * Adjust the frequency of the PHC by the indicated parts per billion from the * base frequency. **/ static int i40e_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) { struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); struct timespec64 now, then = ns_to_timespec64(delta); unsigned long flags; spin_lock_irqsave(&pf->tmreg_lock, flags); i40e_ptp_read(pf, &now); now = timespec64_add(now, then); i40e_ptp_write(pf, (const struct timespec64 *)&now); spin_unlock_irqrestore(&pf->tmreg_lock, flags); return 0; } /** * i40e_ptp_gettime - Get the time of the PHC * @ptp: The PTP clock structure * @ts: timespec structure to hold the current time value * * Read the device clock and return the correct value on ns, after converting it * into a timespec struct. **/ static int i40e_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) { struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); unsigned long flags; spin_lock_irqsave(&pf->tmreg_lock, flags); i40e_ptp_read(pf, ts); spin_unlock_irqrestore(&pf->tmreg_lock, flags); return 0; } /** * i40e_ptp_settime - Set the time of the PHC * @ptp: The PTP clock structure * @ts: timespec structure that holds the new time value * * Set the device clock to the user input value. The conversion from timespec * to ns happens in the write function. **/ static int i40e_ptp_settime(struct ptp_clock_info *ptp, const struct timespec64 *ts) { struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps); unsigned long flags; spin_lock_irqsave(&pf->tmreg_lock, flags); i40e_ptp_write(pf, ts); spin_unlock_irqrestore(&pf->tmreg_lock, flags); return 0; } /** * i40e_ptp_feature_enable - Enable/disable ancillary features of the PHC subsystem * @ptp: The PTP clock structure * @rq: The requested feature to change * @on: Enable/disable flag * * The XL710 does not support any of the ancillary features of the PHC * subsystem, so this function may just return. **/ static int i40e_ptp_feature_enable(struct ptp_clock_info *ptp, struct ptp_clock_request *rq, int on) { return -EOPNOTSUPP; } /** * i40e_ptp_rx_hang - Detect error case when Rx timestamp registers are hung * @vsi: The VSI with the rings relevant to 1588 * * This watchdog task is scheduled to detect error case where hardware has * dropped an Rx packet that was timestamped when the ring is full. The * particular error is rare but leaves the device in a state unable to timestamp * any future packets. **/ void i40e_ptp_rx_hang(struct i40e_vsi *vsi) { struct i40e_pf *pf = vsi->back; struct i40e_hw *hw = &pf->hw; struct i40e_ring *rx_ring; unsigned long rx_event; u32 prttsyn_stat; int n; /* Since we cannot turn off the Rx timestamp logic if the device is * configured for Tx timestamping, we check if Rx timestamping is * configured. We don't want to spuriously warn about Rx timestamp * hangs if we don't care about the timestamps. */ if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx) return; prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_1); /* Unless all four receive timestamp registers are latched, we are not * concerned about a possible PTP Rx hang, so just update the timeout * counter and exit. */ if (!(prttsyn_stat & ((I40E_PRTTSYN_STAT_1_RXT0_MASK << I40E_PRTTSYN_STAT_1_RXT0_SHIFT) | (I40E_PRTTSYN_STAT_1_RXT1_MASK << I40E_PRTTSYN_STAT_1_RXT1_SHIFT) | (I40E_PRTTSYN_STAT_1_RXT2_MASK << I40E_PRTTSYN_STAT_1_RXT2_SHIFT) | (I40E_PRTTSYN_STAT_1_RXT3_MASK << I40E_PRTTSYN_STAT_1_RXT3_SHIFT)))) { pf->last_rx_ptp_check = jiffies; return; } /* Determine the most recent watchdog or rx_timestamp event. */ rx_event = pf->last_rx_ptp_check; for (n = 0; n < vsi->num_queue_pairs; n++) { rx_ring = vsi->rx_rings[n]; if (time_after(rx_ring->last_rx_timestamp, rx_event)) rx_event = rx_ring->last_rx_timestamp; } /* Only need to read the high RXSTMP register to clear the lock */ if (time_is_before_jiffies(rx_event + 5 * HZ)) { rd32(hw, I40E_PRTTSYN_RXTIME_H(0)); rd32(hw, I40E_PRTTSYN_RXTIME_H(1)); rd32(hw, I40E_PRTTSYN_RXTIME_H(2)); rd32(hw, I40E_PRTTSYN_RXTIME_H(3)); pf->last_rx_ptp_check = jiffies; pf->rx_hwtstamp_cleared++; dev_warn(&vsi->back->pdev->dev, "%s: clearing Rx timestamp hang\n", __func__); } } /** * i40e_ptp_tx_hwtstamp - Utility function which returns the Tx timestamp * @pf: Board private structure * * Read the value of the Tx timestamp from the registers, convert it into a * value consumable by the stack, and store that result into the shhwtstamps * struct before returning it up the stack. **/ void i40e_ptp_tx_hwtstamp(struct i40e_pf *pf) { struct skb_shared_hwtstamps shhwtstamps; struct i40e_hw *hw = &pf->hw; u32 hi, lo; u64 ns; if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_tx) return; /* don't attempt to timestamp if we don't have an skb */ if (!pf->ptp_tx_skb) return; lo = rd32(hw, I40E_PRTTSYN_TXTIME_L); hi = rd32(hw, I40E_PRTTSYN_TXTIME_H); ns = (((u64)hi) << 32) | lo; i40e_ptp_convert_to_hwtstamp(&shhwtstamps, ns); skb_tstamp_tx(pf->ptp_tx_skb, &shhwtstamps); dev_kfree_skb_any(pf->ptp_tx_skb); pf->ptp_tx_skb = NULL; clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, &pf->state); } /** * i40e_ptp_rx_hwtstamp - Utility function which checks for an Rx timestamp * @pf: Board private structure * @skb: Particular skb to send timestamp with * @index: Index into the receive timestamp registers for the timestamp * * The XL710 receives a notification in the receive descriptor with an offset * into the set of RXTIME registers where the timestamp is for that skb. This * function goes and fetches the receive timestamp from that offset, if a valid * one exists. The RXTIME registers are in ns, so we must convert the result * first. **/ void i40e_ptp_rx_hwtstamp(struct i40e_pf *pf, struct sk_buff *skb, u8 index) { u32 prttsyn_stat, hi, lo; struct i40e_hw *hw; u64 ns; /* Since we cannot turn off the Rx timestamp logic if the device is * doing Tx timestamping, check if Rx timestamping is configured. */ if (!(pf->flags & I40E_FLAG_PTP) || !pf->ptp_rx) return; hw = &pf->hw; prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_1); if (!(prttsyn_stat & (1 << index))) return; lo = rd32(hw, I40E_PRTTSYN_RXTIME_L(index)); hi = rd32(hw, I40E_PRTTSYN_RXTIME_H(index)); ns = (((u64)hi) << 32) | lo; i40e_ptp_convert_to_hwtstamp(skb_hwtstamps(skb), ns); } /** * i40e_ptp_set_increment - Utility function to update clock increment rate * @pf: Board private structure * * During a link change, the DMA frequency that drives the 1588 logic will * change. In order to keep the PRTTSYN_TIME registers in units of nanoseconds, * we must update the increment value per clock tick. **/ void i40e_ptp_set_increment(struct i40e_pf *pf) { struct i40e_link_status *hw_link_info; struct i40e_hw *hw = &pf->hw; u64 incval; hw_link_info = &hw->phy.link_info; i40e_aq_get_link_info(&pf->hw, true, NULL, NULL); switch (hw_link_info->link_speed) { case I40E_LINK_SPEED_10GB: incval = I40E_PTP_10GB_INCVAL; break; case I40E_LINK_SPEED_1GB: incval = I40E_PTP_1GB_INCVAL; break; case I40E_LINK_SPEED_100MB: { static int warn_once; if (!warn_once) { dev_warn(&pf->pdev->dev, "1588 functionality is not supported at 100 Mbps. Stopping the PHC.\n"); warn_once++; } incval = 0; break; } case I40E_LINK_SPEED_40GB: default: incval = I40E_PTP_40GB_INCVAL; break; } /* Write the new increment value into the increment register. The * hardware will not update the clock until both registers have been * written. */ wr32(hw, I40E_PRTTSYN_INC_L, incval & 0xFFFFFFFF); wr32(hw, I40E_PRTTSYN_INC_H, incval >> 32); /* Update the base adjustement value. */ ACCESS_ONCE(pf->ptp_base_adj) = incval; smp_mb(); /* Force the above update. */ } /** * i40e_ptp_get_ts_config - ioctl interface to read the HW timestamping * @pf: Board private structure * @ifreq: ioctl data * * Obtain the current hardware timestamping settigs as requested. To do this, * keep a shadow copy of the timestamp settings rather than attempting to * deconstruct it from the registers. **/ int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr) { struct hwtstamp_config *config = &pf->tstamp_config; if (!(pf->flags & I40E_FLAG_PTP)) return -EOPNOTSUPP; return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? -EFAULT : 0; } /** * i40e_ptp_set_timestamp_mode - setup hardware for requested timestamp mode * @pf: Board private structure * @config: hwtstamp settings requested or saved * * Control hardware registers to enter the specific mode requested by the * user. Also used during reset path to ensure that timestamp settings are * maintained. * * Note: modifies config in place, and may update the requested mode to be * more broad if the specific filter is not directly supported. **/ static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf, struct hwtstamp_config *config) { struct i40e_hw *hw = &pf->hw; u32 tsyntype, regval; /* Reserved for future extensions. */ if (config->flags) return -EINVAL; switch (config->tx_type) { case HWTSTAMP_TX_OFF: pf->ptp_tx = false; break; case HWTSTAMP_TX_ON: pf->ptp_tx = true; break; default: return -ERANGE; } switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: pf->ptp_rx = false; /* We set the type to V1, but do not enable UDP packet * recognition. In this way, we should be as close to * disabling PTP Rx timestamps as possible since V1 packets * are always UDP, since L2 packets are a V2 feature. */ tsyntype = I40E_PRTTSYN_CTL1_TSYNTYPE_V1; break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: pf->ptp_rx = true; tsyntype = I40E_PRTTSYN_CTL1_V1MESSTYPE0_MASK | I40E_PRTTSYN_CTL1_TSYNTYPE_V1 | I40E_PRTTSYN_CTL1_UDP_ENA_MASK; config->rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: pf->ptp_rx = true; tsyntype = I40E_PRTTSYN_CTL1_V2MESSTYPE0_MASK | I40E_PRTTSYN_CTL1_TSYNTYPE_V2 | I40E_PRTTSYN_CTL1_UDP_ENA_MASK; config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; break; case HWTSTAMP_FILTER_ALL: default: return -ERANGE; } /* Clear out all 1588-related registers to clear and unlatch them. */ rd32(hw, I40E_PRTTSYN_STAT_0); rd32(hw, I40E_PRTTSYN_TXTIME_H); rd32(hw, I40E_PRTTSYN_RXTIME_H(0)); rd32(hw, I40E_PRTTSYN_RXTIME_H(1)); rd32(hw, I40E_PRTTSYN_RXTIME_H(2)); rd32(hw, I40E_PRTTSYN_RXTIME_H(3)); /* Enable/disable the Tx timestamp interrupt based on user input. */ regval = rd32(hw, I40E_PRTTSYN_CTL0); if (pf->ptp_tx) regval |= I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK; else regval &= ~I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK; wr32(hw, I40E_PRTTSYN_CTL0, regval); regval = rd32(hw, I40E_PFINT_ICR0_ENA); if (pf->ptp_tx) regval |= I40E_PFINT_ICR0_ENA_TIMESYNC_MASK; else regval &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK; wr32(hw, I40E_PFINT_ICR0_ENA, regval); /* Although there is no simple on/off switch for Rx, we "disable" Rx * timestamps by setting to V1 only mode and clear the UDP * recognition. This ought to disable all PTP Rx timestamps as V1 * packets are always over UDP. Note that software is configured to * ignore Rx timestamps via the pf->ptp_rx flag. */ regval = rd32(hw, I40E_PRTTSYN_CTL1); /* clear everything but the enable bit */ regval &= I40E_PRTTSYN_CTL1_TSYNENA_MASK; /* now enable bits for desired Rx timestamps */ regval |= tsyntype; wr32(hw, I40E_PRTTSYN_CTL1, regval); return 0; } /** * i40e_ptp_set_ts_config - ioctl interface to control the HW timestamping * @pf: Board private structure * @ifreq: ioctl data * * Respond to the user filter requests and make the appropriate hardware * changes here. The XL710 cannot support splitting of the Tx/Rx timestamping * logic, so keep track in software of whether to indicate these timestamps * or not. * * It is permissible to "upgrade" the user request to a broader filter, as long * as the user receives the timestamps they care about and the user is notified * the filter has been broadened. **/ int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr) { struct hwtstamp_config config; int err; if (!(pf->flags & I40E_FLAG_PTP)) return -EOPNOTSUPP; if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) return -EFAULT; err = i40e_ptp_set_timestamp_mode(pf, &config); if (err) return err; /* save these settings for future reference */ pf->tstamp_config = config; return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? -EFAULT : 0; } /** * i40e_ptp_create_clock - Create PTP clock device for userspace * @pf: Board private structure * * This function creates a new PTP clock device. It only creates one if we * don't already have one, so it is safe to call. Will return error if it * can't create one, but success if we already have a device. Should be used * by i40e_ptp_init to create clock initially, and prevent global resets from * creating new clock devices. **/ static long i40e_ptp_create_clock(struct i40e_pf *pf) { /* no need to create a clock device if we already have one */ if (!IS_ERR_OR_NULL(pf->ptp_clock)) return 0; strncpy(pf->ptp_caps.name, i40e_driver_name, sizeof(pf->ptp_caps.name)); pf->ptp_caps.owner = THIS_MODULE; pf->ptp_caps.max_adj = 999999999; pf->ptp_caps.n_ext_ts = 0; pf->ptp_caps.pps = 0; pf->ptp_caps.adjfreq = i40e_ptp_adjfreq; pf->ptp_caps.adjtime = i40e_ptp_adjtime; pf->ptp_caps.gettime64 = i40e_ptp_gettime; pf->ptp_caps.settime64 = i40e_ptp_settime; pf->ptp_caps.enable = i40e_ptp_feature_enable; /* Attempt to register the clock before enabling the hardware. */ pf->ptp_clock = ptp_clock_register(&pf->ptp_caps, &pf->pdev->dev); if (IS_ERR(pf->ptp_clock)) { return PTR_ERR(pf->ptp_clock); } /* clear the hwtstamp settings here during clock create, instead of * during regular init, so that we can maintain settings across a * reset or suspend. */ pf->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; pf->tstamp_config.tx_type = HWTSTAMP_TX_OFF; return 0; } /** * i40e_ptp_init - Initialize the 1588 support after device probe or reset * @pf: Board private structure * * This function sets device up for 1588 support. The first time it is run, it * will create a PHC clock device. It does not create a clock device if one * already exists. It also reconfigures the device after a reset. **/ void i40e_ptp_init(struct i40e_pf *pf) { struct net_device *netdev = pf->vsi[pf->lan_vsi]->netdev; struct i40e_hw *hw = &pf->hw; u32 pf_id; long err; /* Only one PF is assigned to control 1588 logic per port. Do not * enable any support for PFs not assigned via PRTTSYN_CTL0.PF_ID */ pf_id = (rd32(hw, I40E_PRTTSYN_CTL0) & I40E_PRTTSYN_CTL0_PF_ID_MASK) >> I40E_PRTTSYN_CTL0_PF_ID_SHIFT; if (hw->pf_id != pf_id) { pf->flags &= ~I40E_FLAG_PTP; dev_info(&pf->pdev->dev, "%s: PTP not supported on %s\n", __func__, netdev->name); return; } /* we have to initialize the lock first, since we can't control * when the user will enter the PHC device entry points */ spin_lock_init(&pf->tmreg_lock); /* ensure we have a clock device */ err = i40e_ptp_create_clock(pf); if (err) { pf->ptp_clock = NULL; dev_err(&pf->pdev->dev, "%s: ptp_clock_register failed\n", __func__); } else { struct timespec64 ts; u32 regval; dev_info(&pf->pdev->dev, "%s: added PHC on %s\n", __func__, netdev->name); pf->flags |= I40E_FLAG_PTP; /* Ensure the clocks are running. */ regval = rd32(hw, I40E_PRTTSYN_CTL0); regval |= I40E_PRTTSYN_CTL0_TSYNENA_MASK; wr32(hw, I40E_PRTTSYN_CTL0, regval); regval = rd32(hw, I40E_PRTTSYN_CTL1); regval |= I40E_PRTTSYN_CTL1_TSYNENA_MASK; wr32(hw, I40E_PRTTSYN_CTL1, regval); /* Set the increment value per clock tick. */ i40e_ptp_set_increment(pf); /* reset timestamping mode */ i40e_ptp_set_timestamp_mode(pf, &pf->tstamp_config); /* Set the clock value. */ ts = ktime_to_timespec64(ktime_get_real()); i40e_ptp_settime(&pf->ptp_caps, &ts); } } /** * i40e_ptp_stop - Disable the driver/hardware support and unregister the PHC * @pf: Board private structure * * This function handles the cleanup work required from the initialization by * clearing out the important information and unregistering the PHC. **/ void i40e_ptp_stop(struct i40e_pf *pf) { pf->flags &= ~I40E_FLAG_PTP; pf->ptp_tx = false; pf->ptp_rx = false; if (pf->ptp_tx_skb) { dev_kfree_skb_any(pf->ptp_tx_skb); pf->ptp_tx_skb = NULL; clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, &pf->state); } if (pf->ptp_clock) { ptp_clock_unregister(pf->ptp_clock); pf->ptp_clock = NULL; dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__, pf->vsi[pf->lan_vsi]->netdev->name); } }