Thomas Gleixner

tglx@linutronix.de

2004 Thomas Gleixner This documentation is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA For more details see the file COPYING in the source distribution of Linux. The generic NAND driver supports almost all NAND and AG-AND based chips and connects them to the Memory Technology Devices (MTD) subsystem of the Linux Kernel. This documentation is provided for developers who want to implement board drivers or filesystem drivers suitable for NAND devices. None. The function and structure docs are autogenerated. Each function and struct member has a short description which is marked with an [XXX] identifier. The following chapters explain the meaning of those identifiers. The functions are marked with [XXX] identifiers in the short comment. The identifiers explain the usage and scope of the functions. Following identifiers are used: [MTD Interface] These functions provide the interface to the MTD kernel API. They are not replaceable and provide functionality which is complete hardware independent. [NAND Interface] These functions are exported and provide the interface to the NAND kernel API. [GENERIC] Generic functions are not replaceable and provide functionality which is complete hardware independent. [DEFAULT] Default functions provide hardware related functionality which is suitable for most of the implementations. These functions can be replaced by the board driver if necessary. Those functions are called via pointers in the NAND chip description structure. The board driver can set the functions which should be replaced by board dependent functions before calling nand_scan(). If the function pointer is NULL on entry to nand_scan() then the pointer is set to the default function which is suitable for the detected chip type. The struct members are marked with [XXX] identifiers in the comment. The identifiers explain the usage and scope of the members. Following identifiers are used: [INTERN] These members are for NAND driver internal use only and must not be modified. Most of these values are calculated from the chip geometry information which is evaluated during nand_scan(). [REPLACEABLE] Replaceable members hold hardware related functions which can be provided by the board driver. The board driver can set the functions which should be replaced by board dependent functions before calling nand_scan(). If the function pointer is NULL on entry to nand_scan() then the pointer is set to the default function which is suitable for the detected chip type. [BOARDSPECIFIC] Board specific members hold hardware related information which must be provided by the board driver. The board driver must set the function pointers and datafields before calling nand_scan(). [OPTIONAL] Optional members can hold information relevant for the board driver. The generic NAND driver code does not use this information. For most boards it will be sufficient to provide just the basic functions and fill out some really board dependent members in the nand chip description structure. At least you have to provide a mtd structure and a storage for the ioremap'ed chip address. You can allocate the mtd structure using kmalloc or you can allocate it statically. In case of static allocation you have to allocate a nand_chip structure too. Kmalloc based example static struct mtd_info *board_mtd; static void __iomem *baseaddr; Static example static struct mtd_info board_mtd; static struct nand_chip board_chip; static void __iomem *baseaddr; If you want to divide your device into partitions, then define a partitioning scheme suitable to your board. #define NUM_PARTITIONS 2 static struct mtd_partition partition_info[] = { { .name = "Flash partition 1", .offset = 0, .size = 8 * 1024 * 1024 }, { .name = "Flash partition 2", .offset = MTDPART_OFS_NEXT, .size = MTDPART_SIZ_FULL }, }; The hardware control function provides access to the control pins of the NAND chip(s). The access can be done by GPIO pins or by address lines. If you use address lines, make sure that the timing requirements are met. GPIO based example static void board_hwcontrol(struct mtd_info *mtd, int cmd) { switch(cmd){ case NAND_CTL_SETCLE: /* Set CLE pin high */ break; case NAND_CTL_CLRCLE: /* Set CLE pin low */ break; case NAND_CTL_SETALE: /* Set ALE pin high */ break; case NAND_CTL_CLRALE: /* Set ALE pin low */ break; case NAND_CTL_SETNCE: /* Set nCE pin low */ break; case NAND_CTL_CLRNCE: /* Set nCE pin high */ break; } } Address lines based example. It's assumed that the nCE pin is driven by a chip select decoder. static void board_hwcontrol(struct mtd_info *mtd, int cmd) { struct nand_chip *this = (struct nand_chip *) mtd->priv; switch(cmd){ case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT; break; case NAND_CTL_CLRCLE: this->IO_ADDR_W &= ~CLE_ADRR_BIT; break; case NAND_CTL_SETALE: this->IO_ADDR_W |= ALE_ADRR_BIT; break; case NAND_CTL_CLRALE: this->IO_ADDR_W &= ~ALE_ADRR_BIT; break; } } If the hardware interface has the ready busy pin of the NAND chip connected to a GPIO or other accessible I/O pin, this function is used to read back the state of the pin. The function has no arguments and should return 0, if the device is busy (R/B pin is low) and 1, if the device is ready (R/B pin is high). If the hardware interface does not give access to the ready busy pin, then the function must not be defined and the function pointer this->dev_ready is set to NULL. The init function allocates memory and sets up all the board specific parameters and function pointers. When everything is set up nand_scan() is called. This function tries to detect and identify then chip. If a chip is found all the internal data fields are initialized accordingly. The structure(s) have to be zeroed out first and then filled with the necessary information about the device. static int __init board_init (void) { struct nand_chip *this; int err = 0; /* Allocate memory for MTD device structure and private data */ board_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!board_mtd) { printk ("Unable to allocate NAND MTD device structure.\n"); err = -ENOMEM; goto out; } /* map physical address */ baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024); if (!baseaddr) { printk("Ioremap to access NAND chip failed\n"); err = -EIO; goto out_mtd; } /* Get pointer to private data */ this = (struct nand_chip *) (); /* Link the private data with the MTD structure */ board_mtd->priv = this; /* Set address of NAND IO lines */ this->IO_ADDR_R = baseaddr; this->IO_ADDR_W = baseaddr; /* Reference hardware control function */ this->hwcontrol = board_hwcontrol; /* Set command delay time, see datasheet for correct value */ this->chip_delay = CHIP_DEPENDEND_COMMAND_DELAY; /* Assign the device ready function, if available */ this->dev_ready = board_dev_ready; this->eccmode = NAND_ECC_SOFT; /* Scan to find existence of the device */ if (nand_scan (board_mtd, 1)) { err = -ENXIO; goto out_ior; } add_mtd_partitions(board_mtd, partition_info, NUM_PARTITIONS); goto out; out_ior: iounmap(baseaddr); out_mtd: kfree (board_mtd); out: return err; } module_init(board_init); The exit function is only necessary if the driver is compiled as a module. It releases all resources which are held by the chip driver and unregisters the partitions in the MTD layer. #ifdef MODULE static void __exit board_cleanup (void) { /* Release resources, unregister device */ nand_release (board_mtd); /* unmap physical address */ iounmap(baseaddr); /* Free the MTD device structure */ kfree (board_mtd); } module_exit(board_cleanup); #endif This chapter describes the advanced functionality of the NAND driver. For a list of functions which can be overridden by the board driver see the documentation of the nand_chip structure. The nand driver can control chip arrays. Therefore the board driver must provide an own select_chip function. This function must (de)select the requested chip. The function pointer in the nand_chip structure must be set before calling nand_scan(). The maxchip parameter of nand_scan() defines the maximum number of chips to scan for. Make sure that the select_chip function can handle the requested number of chips. The nand driver concatenates the chips to one virtual chip and provides this virtual chip to the MTD layer. Note: The driver can only handle linear chip arrays of equally sized chips. There is no support for parallel arrays which extend the buswidth. GPIO based example static void board_select_chip (struct mtd_info *mtd, int chip) { /* Deselect all chips, set all nCE pins high */ GPIO(BOARD_NAND_NCE) |= 0xff; if (chip >= 0) GPIO(BOARD_NAND_NCE) &= ~ (1 << chip); } Address lines based example. Its assumed that the nCE pins are connected to an address decoder. static void board_select_chip (struct mtd_info *mtd, int chip) { struct nand_chip *this = (struct nand_chip *) mtd->priv; /* Deselect all chips */ this->IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK; this->IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK; switch (chip) { case 0: this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0; this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0; break; .... case n: this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn; this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn; break; } } The nand driver supports three different types of hardware ECC. NAND_ECC_HW3_256 Hardware ECC generator providing 3 bytes ECC per 256 byte. NAND_ECC_HW3_512 Hardware ECC generator providing 3 bytes ECC per 512 byte. NAND_ECC_HW6_512 Hardware ECC generator providing 6 bytes ECC per 512 byte. NAND_ECC_HW8_512 Hardware ECC generator providing 6 bytes ECC per 512 byte. If your hardware generator has a different functionality add it at the appropriate place in nand_base.c The board driver must provide following functions: enable_hwecc This function is called before reading / writing to the chip. Reset or initialize the hardware generator in this function. The function is called with an argument which let you distinguish between read and write operations. calculate_ecc This function is called after read / write from / to the chip. Transfer the ECC from the hardware to the buffer. If the option NAND_HWECC_SYNDROME is set then the function is only called on write. See below. correct_data In case of an ECC error this function is called for error detection and correction. Return 1 respectively 2 in case the error can be corrected. If the error is not correctable return -1. If your hardware generator matches the default algorithm of the nand_ecc software generator then use the correction function provided by nand_ecc instead of implementing duplicated code. Many hardware ECC implementations provide Reed-Solomon codes and calculate an error syndrome on read. The syndrome must be converted to a standard Reed-Solomon syndrome before calling the error correction code in the generic Reed-Solomon library. The ECC bytes must be placed immediately after the data bytes in order to make the syndrome generator work. This is contrary to the usual layout used by software ECC. The separation of data and out of band area is not longer possible. The nand driver code handles this layout and the remaining free bytes in the oob area are managed by the autoplacement code. Provide a matching oob-layout in this case. See rts_from4.c and diskonchip.c for implementation reference. In those cases we must also use bad block tables on FLASH, because the ECC layout is interfering with the bad block marker positions. See bad block table support for details. Most NAND chips mark the bad blocks at a defined position in the spare area. Those blocks must not be erased under any circumstances as the bad block information would be lost. It is possible to check the bad block mark each time when the blocks are accessed by reading the spare area of the first page in the block. This is time consuming so a bad block table is used. The nand driver supports various types of bad block tables. Per device The bad block table contains all bad block information of the device which can consist of multiple chips. Per chip A bad block table is used per chip and contains the bad block information for this particular chip. Fixed offset The bad block table is located at a fixed offset in the chip (device). This applies to various DiskOnChip devices. Automatic placed The bad block table is automatically placed and detected either at the end or at the beginning of a chip (device) Mirrored tables The bad block table is mirrored on the chip (device) to allow updates of the bad block table without data loss. nand_scan() calls the function nand_default_bbt(). nand_default_bbt() selects appropriate default bad block table descriptors depending on the chip information which was retrieved by nand_scan(). The standard policy is scanning the device for bad blocks and build a ram based bad block table which allows faster access than always checking the bad block information on the flash chip itself. It may be desired or necessary to keep a bad block table in FLASH. For AG-AND chips this is mandatory, as they have no factory marked bad blocks. They have factory marked good blocks. The marker pattern is erased when the block is erased to be reused. So in case of powerloss before writing the pattern back to the chip this block would be lost and added to the bad blocks. Therefore we scan the chip(s) when we detect them the first time for good blocks and store this information in a bad block table before erasing any of the blocks. The blocks in which the tables are stored are protected against accidental access by marking them bad in the memory bad block table. The bad block table management functions are allowed to circumvent this protection. The simplest way to activate the FLASH based bad block table support is to set the option NAND_BBT_USE_FLASH in the bbt_option field of the nand chip structure before calling nand_scan(). For AG-AND chips is this done by default. This activates the default FLASH based bad block table functionality of the NAND driver. The default bad block table options are Store bad block table per chip Use 2 bits per block Automatic placement at the end of the chip Use mirrored tables with version numbers Reserve 4 blocks at the end of the chip User defined tables are created by filling out a nand_bbt_descr structure and storing the pointer in the nand_chip structure member bbt_td before calling nand_scan(). If a mirror table is necessary a second structure must be created and a pointer to this structure must be stored in bbt_md inside the nand_chip structure. If the bbt_md member is set to NULL then only the main table is used and no scan for the mirrored table is performed. The most important field in the nand_bbt_descr structure is the options field. The options define most of the table properties. Use the predefined constants from nand.h to define the options. Number of bits per block The supported number of bits is 1, 2, 4, 8. Table per chip Setting the constant NAND_BBT_PERCHIP selects that a bad block table is managed for each chip in a chip array. If this option is not set then a per device bad block table is used. Table location is absolute Use the option constant NAND_BBT_ABSPAGE and define the absolute page number where the bad block table starts in the field pages. If you have selected bad block tables per chip and you have a multi chip array then the start page must be given for each chip in the chip array. Note: there is no scan for a table ident pattern performed, so the fields pattern, veroffs, offs, len can be left uninitialized Table location is automatically detected The table can either be located in the first or the last good blocks of the chip (device). Set NAND_BBT_LASTBLOCK to place the bad block table at the end of the chip (device). The bad block tables are marked and identified by a pattern which is stored in the spare area of the first page in the block which holds the bad block table. Store a pointer to the pattern in the pattern field. Further the length of the pattern has to be stored in len and the offset in the spare area must be given in the offs member of the nand_bbt_descr structure. For mirrored bad block tables different patterns are mandatory. Table creation Set the option NAND_BBT_CREATE to enable the table creation if no table can be found during the scan. Usually this is done only once if a new chip is found. Table write support Set the option NAND_BBT_WRITE to enable the table write support. This allows the update of the bad block table(s) in case a block has to be marked bad due to wear. The MTD interface function block_markbad is calling the update function of the bad block table. If the write support is enabled then the table is updated on FLASH. Note: Write support should only be enabled for mirrored tables with version control. Table version control Set the option NAND_BBT_VERSION to enable the table version control. It's highly recommended to enable this for mirrored tables with write support. It makes sure that the risk of losing the bad block table information is reduced to the loss of the information about the one worn out block which should be marked bad. The version is stored in 4 consecutive bytes in the spare area of the device. The position of the version number is defined by the member veroffs in the bad block table descriptor. Save block contents on write In case that the block which holds the bad block table does contain other useful information, set the option NAND_BBT_SAVECONTENT. When the bad block table is written then the whole block is read the bad block table is updated and the block is erased and everything is written back. If this option is not set only the bad block table is written and everything else in the block is ignored and erased. Number of reserved blocks For automatic placement some blocks must be reserved for bad block table storage. The number of reserved blocks is defined in the maxblocks member of the bad block table description structure. Reserving 4 blocks for mirrored tables should be a reasonable number. This also limits the number of blocks which are scanned for the bad block table ident pattern. The nand driver implements different possibilities for placement of filesystem data in the spare area, Placement defined by fs driver Automatic placement The default placement function is automatic placement. The nand driver has built in default placement schemes for the various chiptypes. If due to hardware ECC functionality the default placement does not fit then the board driver can provide a own placement scheme. File system drivers can provide a own placement scheme which is used instead of the default placement scheme. Placement schemes are defined by a nand_oobinfo structure struct nand_oobinfo { int useecc; int eccbytes; int eccpos[24]; int oobfree[8][2]; }; useecc The useecc member controls the ecc and placement function. The header file include/mtd/mtd-abi.h contains constants to select ecc and placement. MTD_NANDECC_OFF switches off the ecc complete. This is not recommended and available for testing and diagnosis only. MTD_NANDECC_PLACE selects caller defined placement, MTD_NANDECC_AUTOPLACE selects automatic placement. eccbytes The eccbytes member defines the number of ecc bytes per page. eccpos The eccpos array holds the byte offsets in the spare area where the ecc codes are placed. oobfree The oobfree array defines the areas in the spare area which can be used for automatic placement. The information is given in the format {offset, size}. offset defines the start of the usable area, size the length in bytes. More than one area can be defined. The list is terminated by an {0, 0} entry. The calling function provides a pointer to a nand_oobinfo structure which defines the ecc placement. For writes the caller must provide a spare area buffer along with the data buffer. The spare area buffer size is (number of pages) * (size of spare area). For reads the buffer size is (number of pages) * ((size of spare area) + (number of ecc steps per page) * sizeof (int)). The driver stores the result of the ecc check for each tuple in the spare buffer. The storage sequence is <spare data page 0><ecc result 0>...<ecc result n> ... <spare data page n><ecc result 0>...<ecc result n> This is a legacy mode used by YAFFS1. If the spare area buffer is NULL then only the ECC placement is done according to the given scheme in the nand_oobinfo structure. Automatic placement uses the built in defaults to place the ecc bytes in the spare area. If filesystem data have to be stored / read into the spare area then the calling function must provide a buffer. The buffer size per page is determined by the oobfree array in the nand_oobinfo structure. If the spare area buffer is NULL then only the ECC placement is done according to the default builtin scheme. Offset Content Comment 0x00 ECC byte 0 Error correction code byte 0 0x01 ECC byte 1 Error correction code byte 1 0x02 ECC byte 2 Error correction code byte 2 0x03 Autoplace 0 0x04 Autoplace 1 0x05 Bad block marker If any bit in this byte is zero, then this block is bad. This applies only to the first page in a block. In the remaining pages this byte is reserved 0x06 Autoplace 2 0x07 Autoplace 3 Offset Content Comment 0x00 ECC byte 0 Error correction code byte 0 of the lower 256 Byte data in this page 0x01 ECC byte 1 Error correction code byte 1 of the lower 256 Bytes of data in this page 0x02 ECC byte 2 Error correction code byte 2 of the lower 256 Bytes of data in this page 0x03 ECC byte 3 Error correction code byte 0 of the upper 256 Bytes of data in this page 0x04 reserved reserved 0x05 Bad block marker If any bit in this byte is zero, then this block is bad. This applies only to the first page in a block. In the remaining pages this byte is reserved 0x06 ECC byte 4 Error correction code byte 1 of the upper 256 Bytes of data in this page 0x07 ECC byte 5 Error correction code byte 2 of the upper 256 Bytes of data in this page 0x08 - 0x0F Autoplace 0 - 7 Offset Content Comment 0x00 Bad block marker If any bit in this byte is zero, then this block is bad. This applies only to the first page in a block. In the remaining pages this byte is reserved 0x01 Reserved Reserved 0x02-0x27 Autoplace 0 - 37 0x28 ECC byte 0 Error correction code byte 0 of the first 256 Byte data in this page 0x29 ECC byte 1 Error correction code byte 1 of the first 256 Bytes of data in this page 0x2A ECC byte 2 Error correction code byte 2 of the first 256 Bytes data in this page 0x2B ECC byte 3 Error correction code byte 0 of the second 256 Bytes of data in this page 0x2C ECC byte 4 Error correction code byte 1 of the second 256 Bytes of data in this page 0x2D ECC byte 5 Error correction code byte 2 of the second 256 Bytes of data in this page 0x2E ECC byte 6 Error correction code byte 0 of the third 256 Bytes of data in this page 0x2F ECC byte 7 Error correction code byte 1 of the third 256 Bytes of data in this page 0x30 ECC byte 8 Error correction code byte 2 of the third 256 Bytes of data in this page 0x31 ECC byte 9 Error correction code byte 0 of the fourth 256 Bytes of data in this page 0x32 ECC byte 10 Error correction code byte 1 of the fourth 256 Bytes of data in this page 0x33 ECC byte 11 Error correction code byte 2 of the fourth 256 Bytes of data in this page 0x34 ECC byte 12 Error correction code byte 0 of the fifth 256 Bytes of data in this page 0x35 ECC byte 13 Error correction code byte 1 of the fifth 256 Bytes of data in this page 0x36 ECC byte 14 Error correction code byte 2 of the fifth 256 Bytes of data in this page 0x37 ECC byte 15 Error correction code byte 0 of the sixt 256 Bytes of data in this page 0x38 ECC byte 16 Error correction code byte 1 of the sixt 256 Bytes of data in this page 0x39 ECC byte 17 Error correction code byte 2 of the sixt 256 Bytes of data in this page 0x3A ECC byte 18 Error correction code byte 0 of the seventh 256 Bytes of data in this page 0x3B ECC byte 19 Error correction code byte 1 of the seventh 256 Bytes of data in this page 0x3C ECC byte 20 Error correction code byte 2 of the seventh 256 Bytes of data in this page 0x3D ECC byte 21 Error correction code byte 0 of the eighth 256 Bytes of data in this page 0x3E ECC byte 22 Error correction code byte 1 of the eighth 256 Bytes of data in this page 0x3F ECC byte 23 Error correction code byte 2 of the eighth 256 Bytes of data in this page The NAND driver provides all necessary functions for a filesystem via the MTD interface. Filesystems must be aware of the NAND peculiarities and restrictions. One major restrictions of NAND Flash is, that you cannot write as often as you want to a page. The consecutive writes to a page, before erasing it again, are restricted to 1-3 writes, depending on the manufacturers specifications. This applies similar to the spare area. Therefore NAND aware filesystems must either write in page size chunks or hold a writebuffer to collect smaller writes until they sum up to pagesize. Available NAND aware filesystems: JFFS2, YAFFS. The spare area usage to store filesystem data is controlled by the spare area placement functionality which is described in one of the earlier chapters. The MTD project provides a couple of helpful tools to handle NAND Flash. flasherase, flasheraseall: Erase and format FLASH partitions nandwrite: write filesystem images to NAND FLASH nanddump: dump the contents of a NAND FLASH partitions These tools are aware of the NAND restrictions. Please use those tools instead of complaining about errors which are caused by non NAND aware access methods. This chapter describes the constants which might be relevant for a driver developer. These constants are defined in nand.h. They are ored together to describe the chip functionality. /* Buswitdh is 16 bit */ #define NAND_BUSWIDTH_16 0x00000002 /* Device supports partial programming without padding */ #define NAND_NO_PADDING 0x00000004 /* Chip has cache program function */ #define NAND_CACHEPRG 0x00000008 /* Chip has copy back function */ #define NAND_COPYBACK 0x00000010 /* AND Chip which has 4 banks and a confusing page / block * assignment. See Renesas datasheet for further information */ #define NAND_IS_AND 0x00000020 /* Chip has a array of 4 pages which can be read without * additional ready /busy waits */ #define NAND_4PAGE_ARRAY 0x00000040 These constants are defined in nand.h. They are ored together to describe the functionality. /* The hw ecc generator provides a syndrome instead a ecc value on read * This can only work if we have the ecc bytes directly behind the * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ #define NAND_HWECC_SYNDROME 0x00020000 Use these constants to select the ECC algorithm. /* No ECC. Usage is not recommended ! */ #define NAND_ECC_NONE 0 /* Software ECC 3 byte ECC per 256 Byte data */ #define NAND_ECC_SOFT 1 /* Hardware ECC 3 byte ECC per 256 Byte data */ #define NAND_ECC_HW3_256 2 /* Hardware ECC 3 byte ECC per 512 Byte data */ #define NAND_ECC_HW3_512 3 /* Hardware ECC 6 byte ECC per 512 Byte data */ #define NAND_ECC_HW6_512 4 /* Hardware ECC 6 byte ECC per 512 Byte data */ #define NAND_ECC_HW8_512 6 These constants describe the requested hardware access function when the boardspecific hardware control function is called /* Select the chip by setting nCE to low */ #define NAND_CTL_SETNCE 1 /* Deselect the chip by setting nCE to high */ #define NAND_CTL_CLRNCE 2 /* Select the command latch by setting CLE to high */ #define NAND_CTL_SETCLE 3 /* Deselect the command latch by setting CLE to low */ #define NAND_CTL_CLRCLE 4 /* Select the address latch by setting ALE to high */ #define NAND_CTL_SETALE 5 /* Deselect the address latch by setting ALE to low */ #define NAND_CTL_CLRALE 6 /* Set write protection by setting WP to high. Not used! */ #define NAND_CTL_SETWP 7 /* Clear write protection by setting WP to low. Not used! */ #define NAND_CTL_CLRWP 8 These constants describe the options used for bad block table descriptors. /* Options for the bad block table descriptors */ /* The number of bits used per block in the bbt on the device */ #define NAND_BBT_NRBITS_MSK 0x0000000F #define NAND_BBT_1BIT 0x00000001 #define NAND_BBT_2BIT 0x00000002 #define NAND_BBT_4BIT 0x00000004 #define NAND_BBT_8BIT 0x00000008 /* The bad block table is in the last good block of the device */ #define NAND_BBT_LASTBLOCK 0x00000010 /* The bbt is at the given page, else we must scan for the bbt */ #define NAND_BBT_ABSPAGE 0x00000020 /* bbt is stored per chip on multichip devices */ #define NAND_BBT_PERCHIP 0x00000080 /* bbt has a version counter at offset veroffs */ #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none axists */ #define NAND_BBT_CREATE 0x00000200 /* Write bbt if necessary */ #define NAND_BBT_WRITE 0x00001000 /* Read and write back block contents when writing bbt */ #define NAND_BBT_SAVECONTENT 0x00002000 This chapter contains the autogenerated documentation of the structures which are used in the NAND driver and might be relevant for a driver developer. Each struct member has a short description which is marked with an [XXX] identifier. See the chapter "Documentation hints" for an explanation. Kernel Hackers Manual July 2017 struct nand_hw_control 9 4.1.27 struct nand_hw_control Control structure for hardware controller (e.g ECC generator) shared among independent devices struct nand_hw_control { spinlock_t lock; struct nand_chip * active; wait_queue_head_t wq; }; lock protection lock active the mtd device which holds the controller currently wq wait queue to sleep on if a NAND operation is in progress used instead of the per chip wait queue when a hw controller is available. Kernel Hackers Manual July 2017 struct nand_ecc_ctrl 9 4.1.27 struct nand_ecc_ctrl Control structure for ECC struct nand_ecc_ctrl { nand_ecc_modes_t mode; int steps; int size; int bytes; int total; int strength; int prepad; int postpad; struct nand_ecclayout * layout; void * priv; void (* hwctl) (struct mtd_info *mtd, int mode); int (* calculate) (struct mtd_info *mtd, const uint8_t *dat,uint8_t *ecc_code); int (* correct) (struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,uint8_t *calc_ecc); int (* read_page_raw) (struct mtd_info *mtd, struct nand_chip *chip,uint8_t *buf, int oob_required, int page); int (* write_page_raw) (struct mtd_info *mtd, struct nand_chip *chip,const uint8_t *buf, int oob_required); int (* read_page) (struct mtd_info *mtd, struct nand_chip *chip,uint8_t *buf, int oob_required, int page); int (* read_subpage) (struct mtd_info *mtd, struct nand_chip *chip,uint32_t offs, uint32_t len, uint8_t *buf, int page); int (* write_subpage) (struct mtd_info *mtd, struct nand_chip *chip,uint32_t offset, uint32_t data_len,const uint8_t *data_buf, int oob_required); int (* write_page) (struct mtd_info *mtd, struct nand_chip *chip,const uint8_t *buf, int oob_required); int (* write_oob_raw) (struct mtd_info *mtd, struct nand_chip *chip,int page); int (* read_oob_raw) (struct mtd_info *mtd, struct nand_chip *chip,int page); int (* read_oob) (struct mtd_info *mtd, struct nand_chip *chip, int page); int (* write_oob) (struct mtd_info *mtd, struct nand_chip *chip,int page); }; mode ECC mode steps number of ECC steps per page size data bytes per ECC step bytes ECC bytes per step total total number of ECC bytes per page strength max number of correctible bits per ECC step prepad padding information for syndrome based ECC generators postpad padding information for syndrome based ECC generators layout ECC layout control struct pointer priv pointer to private ECC control data hwctl function to control hardware ECC generator. Must only be provided if an hardware ECC is available calculate function for ECC calculation or readback from ECC hardware correct function for ECC correction, matching to ECC generator (sw/hw) read_page_raw function to read a raw page without ECC. This function should hide the specific layout used by the ECC controller and always return contiguous in-band and out-of-band data even if they're not stored contiguously on the NAND chip (e.g. NAND_ECC_HW_SYNDROME interleaves in-band and out-of-band data). write_page_raw function to write a raw page without ECC. This function should hide the specific layout used by the ECC controller and consider the passed data as contiguous in-band and out-of-band data. ECC controller is responsible for doing the appropriate transformations to adapt to its specific layout (e.g. NAND_ECC_HW_SYNDROME interleaves in-band and out-of-band data). read_page function to read a page according to the ECC generator requirements; returns maximum number of bitflips corrected in any single ECC step, 0 if bitflips uncorrectable, -EIO hw error read_subpage function to read parts of the page covered by ECC; returns same as read_page write_subpage function to write parts of the page covered by ECC. write_page function to write a page according to the ECC generator requirements. write_oob_raw function to write chip OOB data without ECC read_oob_raw function to read chip OOB data without ECC read_oob function to read chip OOB data write_oob function to write chip OOB data Kernel Hackers Manual July 2017 struct nand_buffers 9 4.1.27 struct nand_buffers buffer structure for read/write struct nand_buffers { uint8_t * ecccalc; uint8_t * ecccode; uint8_t * databuf; }; ecccalc buffer pointer for calculated ECC, size is oobsize. ecccode buffer pointer for ECC read from flash, size is oobsize. databuf buffer pointer for data, size is (page size + oobsize). Do not change the order of buffers. databuf and oobrbuf must be in consecutive order. Kernel Hackers Manual July 2017 struct nand_chip 9 4.1.27 struct nand_chip NAND Private Flash Chip Data struct nand_chip { void __iomem * IO_ADDR_R; void __iomem * IO_ADDR_W; uint8_t (* read_byte) (struct mtd_info *mtd); u16 (* read_word) (struct mtd_info *mtd); void (* write_byte) (struct mtd_info *mtd, uint8_t byte); void (* write_buf) (struct mtd_info *mtd, const uint8_t *buf, int len); void (* read_buf) (struct mtd_info *mtd, uint8_t *buf, int len); void (* select_chip) (struct mtd_info *mtd, int chip); int (* block_bad) (struct mtd_info *mtd, loff_t ofs, int getchip); int (* block_markbad) (struct mtd_info *mtd, loff_t ofs); void (* cmd_ctrl) (struct mtd_info *mtd, int dat, unsigned int ctrl); int (* init_size) (struct mtd_info *mtd, struct nand_chip *this,u8 *id_data); int (* dev_ready) (struct mtd_info *mtd); void (* cmdfunc) (struct mtd_info *mtd, unsigned command, int column,int page_addr); int(* waitfunc) (struct mtd_info *mtd, struct nand_chip *this); int (* erase) (struct mtd_info *mtd, int page); int (* scan_bbt) (struct mtd_info *mtd); int (* errstat) (struct mtd_info *mtd, struct nand_chip *this, int state,int status, int page); int (* write_page) (struct mtd_info *mtd, struct nand_chip *chip,uint32_t offset, int data_len, const uint8_t *buf,int oob_required, int page, int cached, int raw); int (* onfi_set_features) (struct mtd_info *mtd, struct nand_chip *chip,int feature_addr, uint8_t *subfeature_para); int (* onfi_get_features) (struct mtd_info *mtd, struct nand_chip *chip,int feature_addr, uint8_t *subfeature_para); int (* setup_read_retry) (struct mtd_info *mtd, int retry_mode); int chip_delay; unsigned int options; unsigned int bbt_options; int page_shift; int phys_erase_shift; int bbt_erase_shift; int chip_shift; int numchips; uint64_t chipsize; int pagemask; int pagebuf; unsigned int pagebuf_bitflips; int subpagesize; uint8_t bits_per_cell; uint16_t ecc_strength_ds; uint16_t ecc_step_ds; int onfi_timing_mode_default; int badblockpos; int badblockbits; int onfi_version; int jedec_version; union {unnamed_union}; int read_retries; flstate_t state; uint8_t * oob_poi; struct nand_hw_control * controller; struct nand_ecc_ctrl ecc; struct nand_buffers * buffers; struct nand_hw_control hwcontrol; uint8_t * bbt; struct nand_bbt_descr * bbt_td; struct nand_bbt_descr * bbt_md; struct nand_bbt_descr * badblock_pattern; void * priv; }; IO_ADDR_R [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device IO_ADDR_W [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device. read_byte [REPLACEABLE] read one byte from the chip read_word [REPLACEABLE] read one word from the chip write_byte [REPLACEABLE] write a single byte to the chip on the low 8 I/O lines write_buf [REPLACEABLE] write data from the buffer to the chip read_buf [REPLACEABLE] read data from the chip into the buffer select_chip [REPLACEABLE] select chip nr block_bad [REPLACEABLE] check if a block is bad, using OOB markers block_markbad [REPLACEABLE] mark a block bad cmd_ctrl [BOARDSPECIFIC] hardwarespecific function for controlling ALE/CLE/nCE. Also used to write command and address init_size [BOARDSPECIFIC] hardwarespecific function for setting mtd->oobsize, mtd->writesize and so on. id_data contains the 8 bytes values of NAND_CMD_READID. Return with the bus width. dev_ready [BOARDSPECIFIC] hardwarespecific function for accessing device ready/busy line. If set to NULL no access to ready/busy is available and the ready/busy information is read from the chip status register. cmdfunc [REPLACEABLE] hardwarespecific function for writing commands to the chip. waitfunc [REPLACEABLE] hardwarespecific function for wait on ready. erase [REPLACEABLE] erase function scan_bbt [REPLACEABLE] function to scan bad block table errstat [OPTIONAL] hardware specific function to perform additional error status checks (determine if errors are correctable). write_page [REPLACEABLE] High-level page write function onfi_set_features [REPLACEABLE] set the features for ONFI nand onfi_get_features [REPLACEABLE] get the features for ONFI nand setup_read_retry [FLASHSPECIFIC] flash (vendor) specific function for setting the read-retry mode. Mostly needed for MLC NAND. chip_delay [BOARDSPECIFIC] chip dependent delay for transferring data from array to read regs (tR). options [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about special functionality. See the defines for further explanation. bbt_options [INTERN] bad block specific options. All options used here must come from bbm.h. By default, these options will be copied to the appropriate nand_bbt_descr's. page_shift [INTERN] number of address bits in a page (column address bits). phys_erase_shift [INTERN] number of address bits in a physical eraseblock bbt_erase_shift [INTERN] number of address bits in a bbt entry chip_shift [INTERN] number of address bits in one chip numchips [INTERN] number of physical chips chipsize [INTERN] the size of one chip for multichip arrays pagemask [INTERN] page number mask = number of (pages / chip) - 1 pagebuf [INTERN] holds the pagenumber which is currently in data_buf. pagebuf_bitflips [INTERN] holds the bitflip count for the page which is currently in data_buf. subpagesize [INTERN] holds the subpagesize bits_per_cell [INTERN] number of bits per cell. i.e., 1 means SLC. ecc_strength_ds [INTERN] ECC correctability from the datasheet. Minimum amount of bit errors per ecc_step_ds guaranteed to be correctable. If unknown, set to zero. ecc_step_ds [INTERN] ECC step required by the ecc_strength_ds, also from the datasheet. It is the recommended ECC step size, if known; if unknown, set to zero. onfi_timing_mode_default [INTERN] default ONFI timing mode. This field is either deduced from the datasheet if the NAND chip is not ONFI compliant or set to 0 if it is (an ONFI chip is always configured in mode 0 after a NAND reset) badblockpos [INTERN] position of the bad block marker in the oob area. badblockbits [INTERN] minimum number of set bits in a good block's bad block marker position; i.e., BBM == 11110111b is not bad when badblockbits == 7 onfi_version [INTERN] holds the chip ONFI version (BCD encoded), non 0 if ONFI supported. jedec_version [INTERN] holds the chip JEDEC version (BCD encoded), non 0 if JEDEC supported. {unnamed_union} anonymous read_retries [INTERN] the number of read retry modes supported state [INTERN] the current state of the NAND device oob_poi "poison value buffer," used for laying out OOB data before writing controller [REPLACEABLE] a pointer to a hardware controller structure which is shared among multiple independent devices. ecc [BOARDSPECIFIC] ECC control structure buffers buffer structure for read/write hwcontrol platform-specific hardware control structure bbt [INTERN] bad block table pointer bbt_td [REPLACEABLE] bad block table descriptor for flash lookup. bbt_md [REPLACEABLE] bad block table mirror descriptor badblock_pattern [REPLACEABLE] bad block scan pattern used for initial bad block scan. priv [OPTIONAL] pointer to private chip data Kernel Hackers Manual July 2017 struct nand_flash_dev 9 4.1.27 struct nand_flash_dev NAND Flash Device ID Structure struct nand_flash_dev { char * name; union ecc; int onfi_timing_mode_default; }; name a human-readable name of the NAND chip ecc ECC correctability and step information from the datasheet. ecc.strength_ds: The ECC correctability from the datasheet, same as the ecc_strength_ds in nand_chip{}. ecc.step_ds: The ECC step required by the ecc.strength_ds, same as the ecc_step_ds in nand_chip{}, also from the datasheet. For example, the 4bit ECC for each 512Byte can be set with NAND_ECC_INFO(4, 512). onfi_timing_mode_default the default ONFI timing mode entered after a NAND reset. Should be deduced from timings described in the datasheet. Kernel Hackers Manual July 2017 struct nand_manufacturers 9 4.1.27 struct nand_manufacturers NAND Flash Manufacturer ID Structure struct nand_manufacturers { int id; char * name; }; id manufacturer ID code of device. name Manufacturer name Kernel Hackers Manual July 2017 struct platform_nand_chip 9 4.1.27 struct platform_nand_chip chip level device structure struct platform_nand_chip { int nr_chips; int chip_offset; int nr_partitions; struct mtd_partition * partitions; struct nand_ecclayout * ecclayout; int chip_delay; unsigned int options; unsigned int bbt_options; const char ** part_probe_types; }; nr_chips max. number of chips to scan for chip_offset chip number offset nr_partitions number of partitions pointed to by partitions (or zero) partitions mtd partition list ecclayout ECC layout info structure chip_delay R/B delay value in us options Option flags, e.g. 16bit buswidth bbt_options BBT option flags, e.g. NAND_BBT_USE_FLASH part_probe_types NULL-terminated array of probe types Kernel Hackers Manual July 2017 struct platform_nand_ctrl 9 4.1.27 struct platform_nand_ctrl controller level device structure struct platform_nand_ctrl { int (* probe) (struct platform_device *pdev); void (* remove) (struct platform_device *pdev); void (* hwcontrol) (struct mtd_info *mtd, int cmd); int (* dev_ready) (struct mtd_info *mtd); void (* select_chip) (struct mtd_info *mtd, int chip); void (* cmd_ctrl) (struct mtd_info *mtd, int dat, unsigned int ctrl); void (* write_buf) (struct mtd_info *mtd, const uint8_t *buf, int len); void (* read_buf) (struct mtd_info *mtd, uint8_t *buf, int len); unsigned char (* read_byte) (struct mtd_info *mtd); void * priv; }; probe platform specific function to probe/setup hardware remove platform specific function to remove/teardown hardware hwcontrol platform specific hardware control structure dev_ready platform specific function to read ready/busy pin select_chip platform specific chip select function cmd_ctrl platform specific function for controlling ALE/CLE/nCE. Also used to write command and address write_buf platform specific function for write buffer read_buf platform specific function for read buffer read_byte platform specific function to read one byte from chip priv private data to transport driver specific settings All fields are optional and depend on the hardware driver requirements Kernel Hackers Manual July 2017 struct platform_nand_data 9 4.1.27 struct platform_nand_data container structure for platform-specific data struct platform_nand_data { struct platform_nand_chip chip; struct platform_nand_ctrl ctrl; }; chip chip level chip structure ctrl controller level device structure Kernel Hackers Manual July 2017 nand_opcode_8bits 9 4.1.27 nand_opcode_8bits int nand_opcode_8bits unsigned int command command opcode to check This chapter contains the autogenerated documentation of the NAND kernel API functions which are exported. Each function has a short description which is marked with an [XXX] identifier. See the chapter "Documentation hints" for an explanation. Kernel Hackers Manual July 2017 nand_unlock 9 4.1.27 nand_unlock [REPLACEABLE] unlocks specified locked blocks int nand_unlock struct mtd_info * mtd loff_t ofs uint64_t len mtd mtd info ofs offset to start unlock from len length to unlock Returns unlock status. Kernel Hackers Manual July 2017 nand_lock 9 4.1.27 nand_lock [REPLACEABLE] locks all blocks present in the device int nand_lock struct mtd_info * mtd loff_t ofs uint64_t len mtd mtd info ofs offset to start unlock from len length to unlock This feature is not supported in many NAND parts. 'Micron' NAND parts do have this feature, but it allows only to lock all blocks, not for specified range for block. Implementing 'lock' feature by making use of 'unlock', for now. Returns lock status. Kernel Hackers Manual July 2017 nand_scan_ident 9 4.1.27 nand_scan_ident [NAND Interface] Scan for the NAND device int nand_scan_ident struct mtd_info * mtd int maxchips struct nand_flash_dev * table mtd MTD device structure maxchips number of chips to scan for table alternative NAND ID table This is the first phase of the normal nand_scan function. It reads the flash ID and sets up MTD fields accordingly. The mtd->owner field must be set to the module of the caller. Kernel Hackers Manual July 2017 nand_scan_tail 9 4.1.27 nand_scan_tail [NAND Interface] Scan for the NAND device int nand_scan_tail struct mtd_info * mtd mtd MTD device structure This is the second phase of the normal nand_scan function. It fills out all the uninitialized function pointers with the defaults and scans for a bad block table if appropriate. Kernel Hackers Manual July 2017 nand_scan 9 4.1.27 nand_scan [NAND Interface] Scan for the NAND device int nand_scan struct mtd_info * mtd int maxchips mtd MTD device structure maxchips number of chips to scan for This fills out all the uninitialized function pointers with the defaults. The flash ID is read and the mtd/chip structures are filled with the appropriate values. The mtd->owner field must be set to the module of the caller. Kernel Hackers Manual July 2017 nand_release 9 4.1.27 nand_release [NAND Interface] Free resources held by the NAND device void nand_release struct mtd_info * mtd mtd MTD device structure Kernel Hackers Manual July 2017 nand_scan_bbt 9 4.1.27 nand_scan_bbt [NAND Interface] scan, find, read and maybe create bad block table(s) int nand_scan_bbt struct mtd_info * mtd struct nand_bbt_descr * bd mtd MTD device structure bd descriptor for the good/bad block search pattern The function checks, if a bad block table(s) is/are already available. If not it scans the device for manufacturer marked good / bad blocks and writes the bad block table(s) to the selected place. The bad block table memory is allocated here. It must be freed by calling the nand_free_bbt function. Kernel Hackers Manual July 2017 __nand_calculate_ecc 9 4.1.27 __nand_calculate_ecc [NAND Interface] Calculate 3-byte ECC for 256/512-byte block void __nand_calculate_ecc const unsigned char * buf unsigned int eccsize unsigned char * code buf input buffer with raw data eccsize data bytes per ECC step (256 or 512) code output buffer with ECC Kernel Hackers Manual July 2017 nand_calculate_ecc 9 4.1.27 nand_calculate_ecc [NAND Interface] Calculate 3-byte ECC for 256/512-byte block int nand_calculate_ecc struct mtd_info * mtd const unsigned char * buf unsigned char * code mtd MTD block structure buf input buffer with raw data code output buffer with ECC Kernel Hackers Manual July 2017 __nand_correct_data 9 4.1.27 __nand_correct_data [NAND Interface] Detect and correct bit error(s) int __nand_correct_data unsigned char * buf unsigned char * read_ecc unsigned char * calc_ecc unsigned int eccsize buf raw data read from the chip read_ecc ECC from the chip calc_ecc the ECC calculated from raw data eccsize data bytes per ECC step (256 or 512) Detect and correct a 1 bit error for eccsize byte block Kernel Hackers Manual July 2017 nand_correct_data 9 4.1.27 nand_correct_data [NAND Interface] Detect and correct bit error(s) int nand_correct_data struct mtd_info * mtd unsigned char * buf unsigned char * read_ecc unsigned char * calc_ecc mtd MTD block structure buf raw data read from the chip read_ecc ECC from the chip calc_ecc the ECC calculated from raw data Detect and correct a 1 bit error for 256/512 byte block This chapter contains the autogenerated documentation of the NAND driver internal functions. Each function has a short description which is marked with an [XXX] identifier. See the chapter "Documentation hints" for an explanation. The functions marked with [DEFAULT] might be relevant for a board driver developer. Kernel Hackers Manual July 2017 nand_release_device 9 4.1.27 nand_release_device [GENERIC] release chip void nand_release_device struct mtd_info * mtd mtd MTD device structure Release chip lock and wake up anyone waiting on the device. Kernel Hackers Manual July 2017 nand_read_byte 9 4.1.27 nand_read_byte [DEFAULT] read one byte from the chip uint8_t nand_read_byte struct mtd_info * mtd mtd MTD device structure Default read function for 8bit buswidth Kernel Hackers Manual July 2017 nand_read_byte16 9 4.1.27 nand_read_byte16 [DEFAULT] read one byte endianness aware from the chip uint8_t nand_read_byte16 struct mtd_info * mtd mtd MTD device structure Default read function for 16bit buswidth with endianness conversion. Kernel Hackers Manual July 2017 nand_read_word 9 4.1.27 nand_read_word [DEFAULT] read one word from the chip u16 nand_read_word struct mtd_info * mtd mtd MTD device structure Default read function for 16bit buswidth without endianness conversion. Kernel Hackers Manual July 2017 nand_select_chip 9 4.1.27 nand_select_chip [DEFAULT] control CE line void nand_select_chip struct mtd_info * mtd int chipnr mtd MTD device structure chipnr chipnumber to select, -1 for deselect Default select function for 1 chip devices. Kernel Hackers Manual July 2017 nand_write_byte 9 4.1.27 nand_write_byte [DEFAULT] write single byte to chip void nand_write_byte struct mtd_info * mtd uint8_t byte mtd MTD device structure byte value to write Default function to write a byte to I/O[7:0] Kernel Hackers Manual July 2017 nand_write_byte16 9 4.1.27 nand_write_byte16 [DEFAULT] write single byte to a chip with width 16 void nand_write_byte16 struct mtd_info * mtd uint8_t byte mtd MTD device structure byte value to write Default function to write a byte to I/O[7:0] on a 16-bit wide chip. Kernel Hackers Manual July 2017 nand_write_buf 9 4.1.27 nand_write_buf [DEFAULT] write buffer to chip void nand_write_buf struct mtd_info * mtd const uint8_t * buf int len mtd MTD device structure buf data buffer len number of bytes to write Default write function for 8bit buswidth. Kernel Hackers Manual July 2017 nand_read_buf 9 4.1.27 nand_read_buf [DEFAULT] read chip data into buffer void nand_read_buf struct mtd_info * mtd uint8_t * buf int len mtd MTD device structure buf buffer to store date len number of bytes to read Default read function for 8bit buswidth. Kernel Hackers Manual July 2017 nand_write_buf16 9 4.1.27 nand_write_buf16 [DEFAULT] write buffer to chip void nand_write_buf16 struct mtd_info * mtd const uint8_t * buf int len mtd MTD device structure buf data buffer len number of bytes to write Default write function for 16bit buswidth. Kernel Hackers Manual July 2017 nand_read_buf16 9 4.1.27 nand_read_buf16 [DEFAULT] read chip data into buffer void nand_read_buf16 struct mtd_info * mtd uint8_t * buf int len mtd MTD device structure buf buffer to store date len number of bytes to read Default read function for 16bit buswidth. Kernel Hackers Manual July 2017 nand_block_bad 9 4.1.27 nand_block_bad [DEFAULT] Read bad block marker from the chip int nand_block_bad struct mtd_info * mtd loff_t ofs int getchip mtd MTD device structure ofs offset from device start getchip 0, if the chip is already selected Check, if the block is bad. Kernel Hackers Manual July 2017 nand_default_block_markbad 9 4.1.27 nand_default_block_markbad [DEFAULT] mark a block bad via bad block marker int nand_default_block_markbad struct mtd_info * mtd loff_t ofs mtd MTD device structure ofs offset from device start This is the default implementation, which can be overridden by a hardware specific driver. It provides the details for writing a bad block marker to a block. Kernel Hackers Manual July 2017 nand_block_markbad_lowlevel 9 4.1.27 nand_block_markbad_lowlevel mark a block bad int nand_block_markbad_lowlevel struct mtd_info * mtd loff_t ofs mtd MTD device structure ofs offset from device start This function performs the generic NAND bad block marking steps (i.e., bad block table(s) and/or marker(s)). We only allow the hardware driver to specify how to write bad block markers to OOB (chip->block_markbad). (1) erase the affected block, to allow OOB marker to be written cleanly (2) write bad block marker to OOB area of affected block (unless flag NAND_BBT_NO_OOB_BBM is present) (3) update the BBT Note that we retain the first error encountered in (2) or (3), finish the procedures, and dump the error in the end. Kernel Hackers Manual July 2017 nand_check_wp 9 4.1.27 nand_check_wp [GENERIC] check if the chip is write protected int nand_check_wp struct mtd_info * mtd mtd MTD device structure Check, if the device is write protected. The function expects, that the device is already selected. Kernel Hackers Manual July 2017 nand_block_isreserved 9 4.1.27 nand_block_isreserved [GENERIC] Check if a block is marked reserved. int nand_block_isreserved struct mtd_info * mtd loff_t ofs mtd MTD device structure ofs offset from device start Check if the block is marked as reserved. Kernel Hackers Manual July 2017 nand_block_checkbad 9 4.1.27 nand_block_checkbad [GENERIC] Check if a block is marked bad int nand_block_checkbad struct mtd_info * mtd loff_t ofs int getchip int allowbbt mtd MTD device structure ofs offset from device start getchip 0, if the chip is already selected allowbbt 1, if its allowed to access the bbt area Check, if the block is bad. Either by reading the bad block table or calling of the scan function. Kernel Hackers Manual July 2017 panic_nand_wait_ready 9 4.1.27 panic_nand_wait_ready [GENERIC] Wait for the ready pin after commands. void panic_nand_wait_ready struct mtd_info * mtd unsigned long timeo mtd MTD device structure timeo Timeout Helper function for nand_wait_ready used when needing to wait in interrupt context. Kernel Hackers Manual July 2017 nand_wait_status_ready 9 4.1.27 nand_wait_status_ready [GENERIC] Wait for the ready status after commands. void nand_wait_status_ready struct mtd_info * mtd unsigned long timeo mtd MTD device structure timeo Timeout in ms Wait for status ready (i.e. command done) or timeout. Kernel Hackers Manual July 2017 nand_command 9 4.1.27 nand_command [DEFAULT] Send command to NAND device void nand_command struct mtd_info * mtd unsigned int command int column int page_addr mtd MTD device structure command the command to be sent column the column address for this command, -1 if none page_addr the page address for this command, -1 if none Send command to NAND device. This function is used for small page devices (512 Bytes per page). Kernel Hackers Manual July 2017 nand_command_lp 9 4.1.27 nand_command_lp [DEFAULT] Send command to NAND large page device void nand_command_lp struct mtd_info * mtd unsigned int command int column int page_addr mtd MTD device structure command the command to be sent column the column address for this command, -1 if none page_addr the page address for this command, -1 if none Send command to NAND device. This is the version for the new large page devices. We don't have the separate regions as we have in the small page devices. We must emulate NAND_CMD_READOOB to keep the code compatible. Kernel Hackers Manual July 2017 panic_nand_get_device 9 4.1.27 panic_nand_get_device [GENERIC] Get chip for selected access void panic_nand_get_device struct nand_chip * chip struct mtd_info * mtd int new_state chip the nand chip descriptor mtd MTD device structure new_state the state which is requested Used when in panic, no locks are taken. Kernel Hackers Manual July 2017 nand_get_device 9 4.1.27 nand_get_device [GENERIC] Get chip for selected access int nand_get_device struct mtd_info * mtd int new_state mtd MTD device structure new_state the state which is requested Get the device and lock it for exclusive access Kernel Hackers Manual July 2017 panic_nand_wait 9 4.1.27 panic_nand_wait [GENERIC] wait until the command is done void panic_nand_wait struct mtd_info * mtd struct nand_chip * chip unsigned long timeo mtd MTD device structure chip NAND chip structure timeo timeout Wait for command done. This is a helper function for nand_wait used when we are in interrupt context. May happen when in panic and trying to write an oops through mtdoops. Kernel Hackers Manual July 2017 nand_wait 9 4.1.27 nand_wait [DEFAULT] wait until the command is done int nand_wait struct mtd_info * mtd struct nand_chip * chip mtd MTD device structure chip NAND chip structure Wait for command done. This applies to erase and program only. Erase can take up to 400ms and program up to 20ms according to general NAND and SmartMedia specs. Kernel Hackers Manual July 2017 __nand_unlock 9 4.1.27 __nand_unlock [REPLACEABLE] unlocks specified locked blocks int __nand_unlock struct mtd_info * mtd loff_t ofs uint64_t len int invert mtd mtd info ofs offset to start unlock from len length to unlock invert when = 0, unlock the range of blocks within the lower and upper boundary address when = 1, unlock the range of blocks outside the boundaries of the lower and upper boundary address Returs unlock status. Kernel Hackers Manual July 2017 nand_read_page_raw 9 4.1.27 nand_read_page_raw [INTERN] read raw page data without ecc int nand_read_page_raw struct mtd_info * mtd struct nand_chip * chip uint8_t * buf int oob_required int page mtd mtd info structure chip nand chip info structure buf buffer to store read data oob_required caller requires OOB data read to chip->oob_poi page page number to read Not for syndrome calculating ECC controllers, which use a special oob layout. Kernel Hackers Manual July 2017 nand_read_page_raw_syndrome 9 4.1.27 nand_read_page_raw_syndrome [INTERN] read raw page data without ecc int nand_read_page_raw_syndrome struct mtd_info * mtd struct nand_chip * chip uint8_t * buf int oob_required int page mtd mtd info structure chip nand chip info structure buf buffer to store read data oob_required caller requires OOB data read to chip->oob_poi page page number to read We need a special oob layout and handling even when OOB isn't used. Kernel Hackers Manual July 2017 nand_read_page_swecc 9 4.1.27 nand_read_page_swecc [REPLACEABLE] software ECC based page read function int nand_read_page_swecc struct mtd_info * mtd struct nand_chip * chip uint8_t * buf int oob_required int page mtd mtd info structure chip nand chip info structure buf buffer to store read data oob_required caller requires OOB data read to chip->oob_poi page page number to read Kernel Hackers Manual July 2017 nand_read_subpage 9 4.1.27 nand_read_subpage [REPLACEABLE] ECC based sub-page read function int nand_read_subpage struct mtd_info * mtd struct nand_chip * chip uint32_t data_offs uint32_t readlen uint8_t * bufpoi int page mtd mtd info structure chip nand chip info structure data_offs offset of requested data within the page readlen data length bufpoi buffer to store read data page page number to read Kernel Hackers Manual July 2017 nand_read_page_hwecc 9 4.1.27 nand_read_page_hwecc [REPLACEABLE] hardware ECC based page read function int nand_read_page_hwecc struct mtd_info * mtd struct nand_chip * chip uint8_t * buf int oob_required int page mtd mtd info structure chip nand chip info structure buf buffer to store read data oob_required caller requires OOB data read to chip->oob_poi page page number to read Not for syndrome calculating ECC controllers which need a special oob layout. Kernel Hackers Manual July 2017 nand_read_page_hwecc_oob_first 9 4.1.27 nand_read_page_hwecc_oob_first [REPLACEABLE] hw ecc, read oob first int nand_read_page_hwecc_oob_first struct mtd_info * mtd struct nand_chip * chip uint8_t * buf int oob_required int page mtd mtd info structure chip nand chip info structure buf buffer to store read data oob_required caller requires OOB data read to chip->oob_poi page page number to read Hardware ECC for large page chips, require OOB to be read first. For this ECC mode, the write_page method is re-used from ECC_HW. These methods read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with multiple ECC steps, follows the infix ECC scheme and reads/writes ECC from the data area, by overwriting the NAND manufacturer bad block markings. Kernel Hackers Manual July 2017 nand_read_page_syndrome 9 4.1.27 nand_read_page_syndrome [REPLACEABLE] hardware ECC syndrome based page read int nand_read_page_syndrome struct mtd_info * mtd struct nand_chip * chip uint8_t * buf int oob_required int page mtd mtd info structure chip nand chip info structure buf buffer to store read data oob_required caller requires OOB data read to chip->oob_poi page page number to read The hw generator calculates the error syndrome automatically. Therefore we need a special oob layout and handling. Kernel Hackers Manual July 2017 nand_transfer_oob 9 4.1.27 nand_transfer_oob [INTERN] Transfer oob to client buffer uint8_t * nand_transfer_oob struct nand_chip * chip uint8_t * oob struct mtd_oob_ops * ops size_t len chip nand chip structure oob oob destination address ops oob ops structure len size of oob to transfer Kernel Hackers Manual July 2017 nand_setup_read_retry 9 4.1.27 nand_setup_read_retry [INTERN] Set the READ RETRY mode int nand_setup_read_retry struct mtd_info * mtd int retry_mode mtd MTD device structure retry_mode the retry mode to use Some vendors supply a special command to shift the Vt threshold, to be used when there are too many bitflips in a page (i.e., ECC error). After setting a new threshold, the host should retry reading the page. Kernel Hackers Manual July 2017 nand_do_read_ops 9 4.1.27 nand_do_read_ops [INTERN] Read data with ECC int nand_do_read_ops struct mtd_info * mtd loff_t from struct mtd_oob_ops * ops mtd MTD device structure from offset to read from ops oob ops structure Internal function. Called with chip held. Kernel Hackers Manual July 2017 nand_read 9 4.1.27 nand_read [MTD Interface] MTD compatibility function for nand_do_read_ecc int nand_read struct mtd_info * mtd loff_t from size_t len size_t * retlen uint8_t * buf mtd MTD device structure from offset to read from len number of bytes to read retlen pointer to variable to store the number of read bytes buf the databuffer to put data Get hold of the chip and call nand_do_read. Kernel Hackers Manual July 2017 nand_read_oob_std 9 4.1.27 nand_read_oob_std [REPLACEABLE] the most common OOB data read function int nand_read_oob_std struct mtd_info * mtd struct nand_chip * chip int page mtd mtd info structure chip nand chip info structure page page number to read Kernel Hackers Manual July 2017 nand_read_oob_syndrome 9 4.1.27 nand_read_oob_syndrome [REPLACEABLE] OOB data read function for HW ECC with syndromes int nand_read_oob_syndrome struct mtd_info * mtd struct nand_chip * chip int page mtd mtd info structure chip nand chip info structure page page number to read Kernel Hackers Manual July 2017 nand_write_oob_std 9 4.1.27 nand_write_oob_std [REPLACEABLE] the most common OOB data write function int nand_write_oob_std struct mtd_info * mtd struct nand_chip * chip int page mtd mtd info structure chip nand chip info structure page page number to write Kernel Hackers Manual July 2017 nand_write_oob_syndrome 9 4.1.27 nand_write_oob_syndrome [REPLACEABLE] OOB data write function for HW ECC with syndrome - only for large page flash int nand_write_oob_syndrome struct mtd_info * mtd struct nand_chip * chip int page mtd mtd info structure chip nand chip info structure page page number to write Kernel Hackers Manual July 2017 nand_do_read_oob 9 4.1.27 nand_do_read_oob [INTERN] NAND read out-of-band int nand_do_read_oob struct mtd_info * mtd loff_t from struct mtd_oob_ops * ops mtd MTD device structure from offset to read from ops oob operations description structure NAND read out-of-band data from the spare area. Kernel Hackers Manual July 2017 nand_read_oob 9 4.1.27 nand_read_oob [MTD Interface] NAND read data and/or out-of-band int nand_read_oob struct mtd_info * mtd loff_t from struct mtd_oob_ops * ops mtd MTD device structure from offset to read from ops oob operation description structure NAND read data and/or out-of-band data. Kernel Hackers Manual July 2017 nand_write_page_raw 9 4.1.27 nand_write_page_raw [INTERN] raw page write function int nand_write_page_raw struct mtd_info * mtd struct nand_chip * chip const uint8_t * buf int oob_required mtd mtd info structure chip nand chip info structure buf data buffer oob_required must write chip->oob_poi to OOB Not for syndrome calculating ECC controllers, which use a special oob layout. Kernel Hackers Manual July 2017 nand_write_page_raw_syndrome 9 4.1.27 nand_write_page_raw_syndrome [INTERN] raw page write function int nand_write_page_raw_syndrome struct mtd_info * mtd struct nand_chip * chip const uint8_t * buf int oob_required mtd mtd info structure chip nand chip info structure buf data buffer oob_required must write chip->oob_poi to OOB We need a special oob layout and handling even when ECC isn't checked. Kernel Hackers Manual July 2017 nand_write_page_swecc 9 4.1.27 nand_write_page_swecc [REPLACEABLE] software ECC based page write function int nand_write_page_swecc struct mtd_info * mtd struct nand_chip * chip const uint8_t * buf int oob_required mtd mtd info structure chip nand chip info structure buf data buffer oob_required must write chip->oob_poi to OOB Kernel Hackers Manual July 2017 nand_write_page_hwecc 9 4.1.27 nand_write_page_hwecc [REPLACEABLE] hardware ECC based page write function int nand_write_page_hwecc struct mtd_info * mtd struct nand_chip * chip const uint8_t * buf int oob_required mtd mtd info structure chip nand chip info structure buf data buffer oob_required must write chip->oob_poi to OOB Kernel Hackers Manual July 2017 nand_write_subpage_hwecc 9 4.1.27 nand_write_subpage_hwecc [REPLACEABLE] hardware ECC based subpage write int nand_write_subpage_hwecc struct mtd_info * mtd struct nand_chip * chip uint32_t offset uint32_t data_len const uint8_t * buf int oob_required mtd mtd info structure chip nand chip info structure offset column address of subpage within the page data_len data length buf data buffer oob_required must write chip->oob_poi to OOB Kernel Hackers Manual July 2017 nand_write_page_syndrome 9 4.1.27 nand_write_page_syndrome [REPLACEABLE] hardware ECC syndrome based page write int nand_write_page_syndrome struct mtd_info * mtd struct nand_chip * chip const uint8_t * buf int oob_required mtd mtd info structure chip nand chip info structure buf data buffer oob_required must write chip->oob_poi to OOB The hw generator calculates the error syndrome automatically. Therefore we need a special oob layout and handling. Kernel Hackers Manual July 2017 nand_write_page 9 4.1.27 nand_write_page [REPLACEABLE] write one page int nand_write_page struct mtd_info * mtd struct nand_chip * chip uint32_t offset int data_len const uint8_t * buf int oob_required int page int cached int raw mtd MTD device structure chip NAND chip descriptor offset address offset within the page data_len length of actual data to be written buf the data to write oob_required must write chip->oob_poi to OOB page page number to write cached cached programming raw use _raw version of write_page Kernel Hackers Manual July 2017 nand_fill_oob 9 4.1.27 nand_fill_oob [INTERN] Transfer client buffer to oob uint8_t * nand_fill_oob struct mtd_info * mtd uint8_t * oob size_t len struct mtd_oob_ops * ops mtd MTD device structure oob oob data buffer len oob data write length ops oob ops structure Kernel Hackers Manual July 2017 nand_do_write_ops 9 4.1.27 nand_do_write_ops [INTERN] NAND write with ECC int nand_do_write_ops struct mtd_info * mtd loff_t to struct mtd_oob_ops * ops mtd MTD device structure to offset to write to ops oob operations description structure NAND write with ECC. Kernel Hackers Manual July 2017 panic_nand_write 9 4.1.27 panic_nand_write [MTD Interface] NAND write with ECC int panic_nand_write struct mtd_info * mtd loff_t to size_t len size_t * retlen const uint8_t * buf mtd MTD device structure to offset to write to len number of bytes to write retlen pointer to variable to store the number of written bytes buf the data to write NAND write with ECC. Used when performing writes in interrupt context, this may for example be called by mtdoops when writing an oops while in panic. Kernel Hackers Manual July 2017 nand_write 9 4.1.27 nand_write [MTD Interface] NAND write with ECC int nand_write struct mtd_info * mtd loff_t to size_t len size_t * retlen const uint8_t * buf mtd MTD device structure to offset to write to len number of bytes to write retlen pointer to variable to store the number of written bytes buf the data to write NAND write with ECC. Kernel Hackers Manual July 2017 nand_do_write_oob 9 4.1.27 nand_do_write_oob [MTD Interface] NAND write out-of-band int nand_do_write_oob struct mtd_info * mtd loff_t to struct mtd_oob_ops * ops mtd MTD device structure to offset to write to ops oob operation description structure NAND write out-of-band. Kernel Hackers Manual July 2017 nand_write_oob 9 4.1.27 nand_write_oob [MTD Interface] NAND write data and/or out-of-band int nand_write_oob struct mtd_info * mtd loff_t to struct mtd_oob_ops * ops mtd MTD device structure to offset to write to ops oob operation description structure Kernel Hackers Manual July 2017 single_erase 9 4.1.27 single_erase [GENERIC] NAND standard block erase command function int single_erase struct mtd_info * mtd int page mtd MTD device structure page the page address of the block which will be erased Standard erase command for NAND chips. Returns NAND status. Kernel Hackers Manual July 2017 nand_erase 9 4.1.27 nand_erase [MTD Interface] erase block(s) int nand_erase struct mtd_info * mtd struct erase_info * instr mtd MTD device structure instr erase instruction Erase one ore more blocks. Kernel Hackers Manual July 2017 nand_erase_nand 9 4.1.27 nand_erase_nand [INTERN] erase block(s) int nand_erase_nand struct mtd_info * mtd struct erase_info * instr int allowbbt mtd MTD device structure instr erase instruction allowbbt allow erasing the bbt area Erase one ore more blocks. Kernel Hackers Manual July 2017 nand_sync 9 4.1.27 nand_sync [MTD Interface] sync void nand_sync struct mtd_info * mtd mtd MTD device structure Sync is actually a wait for chip ready function. Kernel Hackers Manual July 2017 nand_block_isbad 9 4.1.27 nand_block_isbad [MTD Interface] Check if block at offset is bad int nand_block_isbad struct mtd_info * mtd loff_t offs mtd MTD device structure offs offset relative to mtd start Kernel Hackers Manual July 2017 nand_block_markbad 9 4.1.27 nand_block_markbad [MTD Interface] Mark block at the given offset as bad int nand_block_markbad struct mtd_info * mtd loff_t ofs mtd MTD device structure ofs offset relative to mtd start Kernel Hackers Manual July 2017 nand_onfi_set_features 9 4.1.27 nand_onfi_set_features [REPLACEABLE] set features for ONFI nand int nand_onfi_set_features struct mtd_info * mtd struct nand_chip * chip int addr uint8_t * subfeature_param mtd MTD device structure chip nand chip info structure addr feature address. subfeature_param the subfeature parameters, a four bytes array. Kernel Hackers Manual July 2017 nand_onfi_get_features 9 4.1.27 nand_onfi_get_features [REPLACEABLE] get features for ONFI nand int nand_onfi_get_features struct mtd_info * mtd struct nand_chip * chip int addr uint8_t * subfeature_param mtd MTD device structure chip nand chip info structure addr feature address. subfeature_param the subfeature parameters, a four bytes array. Kernel Hackers Manual July 2017 nand_suspend 9 4.1.27 nand_suspend [MTD Interface] Suspend the NAND flash int nand_suspend struct mtd_info * mtd mtd MTD device structure Kernel Hackers Manual July 2017 nand_resume 9 4.1.27 nand_resume [MTD Interface] Resume the NAND flash void nand_resume struct mtd_info * mtd mtd MTD device structure Kernel Hackers Manual July 2017 nand_shutdown 9 4.1.27 nand_shutdown [MTD Interface] Finish the current NAND operation and prevent further operations void nand_shutdown struct mtd_info * mtd mtd MTD device structure Kernel Hackers Manual July 2017 check_pattern 9 4.1.27 check_pattern [GENERIC] check if a pattern is in the buffer int check_pattern uint8_t * buf int len int paglen struct nand_bbt_descr * td buf the buffer to search len the length of buffer to search paglen the pagelength td search pattern descriptor Check for a pattern at the given place. Used to search bad block tables and good / bad block identifiers. Kernel Hackers Manual July 2017 check_short_pattern 9 4.1.27 check_short_pattern [GENERIC] check if a pattern is in the buffer int check_short_pattern uint8_t * buf struct nand_bbt_descr * td buf the buffer to search td search pattern descriptor Check for a pattern at the given place. Used to search bad block tables and good / bad block identifiers. Same as check_pattern, but no optional empty check. Kernel Hackers Manual July 2017 add_marker_len 9 4.1.27 add_marker_len compute the length of the marker in data area u32 add_marker_len struct nand_bbt_descr * td td BBT descriptor used for computation The length will be 0 if the marker is located in OOB area. Kernel Hackers Manual July 2017 read_bbt 9 4.1.27 read_bbt [GENERIC] Read the bad block table starting from page int read_bbt struct mtd_info * mtd uint8_t * buf int page int num struct nand_bbt_descr * td int offs mtd MTD device structure buf temporary buffer page the starting page num the number of bbt descriptors to read td the bbt describtion table offs block number offset in the table Read the bad block table starting from page. Kernel Hackers Manual July 2017 read_abs_bbt 9 4.1.27 read_abs_bbt [GENERIC] Read the bad block table starting at a given page int read_abs_bbt struct mtd_info * mtd uint8_t * buf struct nand_bbt_descr * td int chip mtd MTD device structure buf temporary buffer td descriptor for the bad block table chip read the table for a specific chip, -1 read all chips; applies only if NAND_BBT_PERCHIP option is set Read the bad block table for all chips starting at a given page. We assume that the bbt bits are in consecutive order. Kernel Hackers Manual July 2017 scan_read_oob 9 4.1.27 scan_read_oob [GENERIC] Scan data+OOB region to buffer int scan_read_oob struct mtd_info * mtd uint8_t * buf loff_t offs size_t len mtd MTD device structure buf temporary buffer offs offset at which to scan len length of data region to read Scan read data from data+OOB. May traverse multiple pages, interleaving page,OOB,page,OOB,... in buf. Completes transfer and returns the strongest ECC condition (error or bitflip). May quit on the first (non-ECC) error. Kernel Hackers Manual July 2017 read_abs_bbts 9 4.1.27 read_abs_bbts [GENERIC] Read the bad block table(s) for all chips starting at a given page void read_abs_bbts struct mtd_info * mtd uint8_t * buf struct nand_bbt_descr * td struct nand_bbt_descr * md mtd MTD device structure buf temporary buffer td descriptor for the bad block table md descriptor for the bad block table mirror Read the bad block table(s) for all chips starting at a given page. We assume that the bbt bits are in consecutive order. Kernel Hackers Manual July 2017 create_bbt 9 4.1.27 create_bbt [GENERIC] Create a bad block table by scanning the device int create_bbt struct mtd_info * mtd uint8_t * buf struct nand_bbt_descr * bd int chip mtd MTD device structure buf temporary buffer bd descriptor for the good/bad block search pattern chip create the table for a specific chip, -1 read all chips; applies only if NAND_BBT_PERCHIP option is set Create a bad block table by scanning the device for the given good/bad block identify pattern. Kernel Hackers Manual July 2017 search_bbt 9 4.1.27 search_bbt [GENERIC] scan the device for a specific bad block table int search_bbt struct mtd_info * mtd uint8_t * buf struct nand_bbt_descr * td mtd MTD device structure buf temporary buffer td descriptor for the bad block table Read the bad block table by searching for a given ident pattern. Search is preformed either from the beginning up or from the end of the device downwards. The search starts always at the start of a block. If the option NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains the bad block information of this chip. This is necessary to provide support for certain DOC devices. The bbt ident pattern resides in the oob area of the first page in a block. Kernel Hackers Manual July 2017 search_read_bbts 9 4.1.27 search_read_bbts [GENERIC] scan the device for bad block table(s) void search_read_bbts struct mtd_info * mtd uint8_t * buf struct nand_bbt_descr * td struct nand_bbt_descr * md mtd MTD device structure buf temporary buffer td descriptor for the bad block table md descriptor for the bad block table mirror Search and read the bad block table(s). Kernel Hackers Manual July 2017 write_bbt 9 4.1.27 write_bbt [GENERIC] (Re)write the bad block table int write_bbt struct mtd_info * mtd uint8_t * buf struct nand_bbt_descr * td struct nand_bbt_descr * md int chipsel mtd MTD device structure buf temporary buffer td descriptor for the bad block table md descriptor for the bad block table mirror chipsel selector for a specific chip, -1 for all (Re)write the bad block table. Kernel Hackers Manual July 2017 nand_memory_bbt 9 4.1.27 nand_memory_bbt [GENERIC] create a memory based bad block table int nand_memory_bbt struct mtd_info * mtd struct nand_bbt_descr * bd mtd MTD device structure bd descriptor for the good/bad block search pattern The function creates a memory based bbt by scanning the device for manufacturer / software marked good / bad blocks. Kernel Hackers Manual July 2017 check_create 9 4.1.27 check_create [GENERIC] create and write bbt(s) if necessary int check_create struct mtd_info * mtd uint8_t * buf struct nand_bbt_descr * bd mtd MTD device structure buf temporary buffer bd descriptor for the good/bad block search pattern The function checks the results of the previous call to read_bbt and creates / updates the bbt(s) if necessary. Creation is necessary if no bbt was found for the chip/device. Update is necessary if one of the tables is missing or the version nr. of one table is less than the other. Kernel Hackers Manual July 2017 mark_bbt_region 9 4.1.27 mark_bbt_region [GENERIC] mark the bad block table regions void mark_bbt_region struct mtd_info * mtd struct nand_bbt_descr * td mtd MTD device structure td bad block table descriptor The bad block table regions are marked as bad to prevent accidental erasures / writes. The regions are identified by the mark 0x02. Kernel Hackers Manual July 2017 verify_bbt_descr 9 4.1.27 verify_bbt_descr verify the bad block description void verify_bbt_descr struct mtd_info * mtd struct nand_bbt_descr * bd mtd MTD device structure bd the table to verify This functions performs a few sanity checks on the bad block description table. Kernel Hackers Manual July 2017 nand_update_bbt 9 4.1.27 nand_update_bbt update bad block table(s) int nand_update_bbt struct mtd_info * mtd loff_t offs mtd MTD device structure offs the offset of the newly marked block The function updates the bad block table(s). Kernel Hackers Manual July 2017 nand_create_badblock_pattern 9 4.1.27 nand_create_badblock_pattern [INTERN] Creates a BBT descriptor structure int nand_create_badblock_pattern struct nand_chip * this this NAND chip to create descriptor for This function allocates and initializes a nand_bbt_descr for BBM detection based on the properties of this. The new descriptor is stored in this->badblock_pattern. Thus, this->badblock_pattern should be NULL when passed to this function. Kernel Hackers Manual July 2017 nand_default_bbt 9 4.1.27 nand_default_bbt [NAND Interface] Select a default bad block table for the device int nand_default_bbt struct mtd_info * mtd mtd MTD device structure This function selects the default bad block table support for the device and calls the nand_scan_bbt function. Kernel Hackers Manual July 2017 nand_isreserved_bbt 9 4.1.27 nand_isreserved_bbt [NAND Interface] Check if a block is reserved int nand_isreserved_bbt struct mtd_info * mtd loff_t offs mtd MTD device structure offs offset in the device Kernel Hackers Manual July 2017 nand_isbad_bbt 9 4.1.27 nand_isbad_bbt [NAND Interface] Check if a block is bad int nand_isbad_bbt struct mtd_info * mtd loff_t offs int allowbbt mtd MTD device structure offs offset in the device allowbbt allow access to bad block table region Kernel Hackers Manual July 2017 nand_markbad_bbt 9 4.1.27 nand_markbad_bbt [NAND Interface] Mark a block bad in the BBT int nand_markbad_bbt struct mtd_info * mtd loff_t offs mtd MTD device structure offs offset of the bad block The following people have contributed to the NAND driver: Steven J. Hillsjhill@realitydiluted.com David Woodhousedwmw2@infradead.org Thomas Gleixnertglx@linutronix.de A lot of users have provided bugfixes, improvements and helping hands for testing. Thanks a lot. The following people have contributed to this document: Thomas Gleixnertglx@linutronix.de