enum ieee80211_channel_flags — channel flags
enum ieee80211_channel_flags {
IEEE80211_CHAN_DISABLED,
IEEE80211_CHAN_NO_IR,
IEEE80211_CHAN_RADAR,
IEEE80211_CHAN_NO_HT40PLUS,
IEEE80211_CHAN_NO_HT40MINUS,
IEEE80211_CHAN_NO_OFDM,
IEEE80211_CHAN_NO_80MHZ,
IEEE80211_CHAN_NO_160MHZ,
IEEE80211_CHAN_INDOOR_ONLY,
IEEE80211_CHAN_GO_CONCURRENT,
IEEE80211_CHAN_NO_20MHZ,
IEEE80211_CHAN_NO_10MHZ
}; This channel is disabled.
do not initiate radiation, this includes sending probe requests or beaconing.
Radar detection is required on this channel.
extension channel above this channel is not permitted.
extension channel below this channel is not permitted.
OFDM is not allowed on this channel.
If the driver supports 80 MHz on the band, this flag indicates that an 80 MHz channel cannot use this channel as the control or any of the secondary channels. This may be due to the driver or due to regulatory bandwidth restrictions.
If the driver supports 160 MHz on the band, this flag indicates that an 160 MHz channel cannot use this channel as the control or any of the secondary channels. This may be due to the driver or due to regulatory bandwidth restrictions.
see NL80211_FREQUENCY_ATTR_INDOOR_ONLY
see NL80211_FREQUENCY_ATTR_GO_CONCURRENT
20 MHz bandwidth is not permitted on this channel.
10 MHz bandwidth is not permitted on this channel.