Lines Matching refs:packets
9 modes and timings and formats it into highly compressed binary packets.
20 the trace data packets. For example a TNT packet only tells whether a
169 So, to disable TSC packets use:
222 tsc Always supported. Produces TSC timestamp packets to provide
230 is produced when a function returns. Causes more packets to be
235 psb_period Allows the frequency of PSB packets to be specified.
255 trace bytes between PSB packets as:
267 If MTC packets are selected, the default config selects a value
278 mtc Produces MTC timing packets.
280 MTC packets provide finer grain timestamp information than TSC
281 packets. MTC packets record time using the hardware crystal
282 clock (CTC) which is related to TSC packets using a TMA packet.
291 The frequency of MTC packets can also be specified - see
294 mtc_period Specifies how frequently MTC packets are produced - see mtc
295 above for how to determine if MTC packets are supported.
322 cyc Produces CYC timing packets.
324 CYC packets provide even finer grain timestamp information than
325 MTC and TSC packets. A CYC packet contains the number of CPU
326 cycles since the last CYC packet. Unlike MTC and TSC packets,
327 CYC packets are only sent when another packet is also sent.
336 The number of CYC packets produced can be reduced by specifying
339 cyc_thresh Specifies how frequently CYC packets are produced - see cyc
340 above for how to determine if CYC packets are supported.
365 CYC packets are not requested by default.
641 Note also, the sched_switch event is only added if TSC packets are requested.
691 decoded packets and instructions. Note that this option slows down the decoder
740 When -D is used, Intel PT packets are displayed. The packet decoder does not
741 pay attention to PSB packets, but just decodes the bytes - so the packets seen
748 To disable the display of Intel PT packets, combine the -D option with