Lines Matching refs:g

52 Data is captured with 'perf record' e.g. to trace 'ls' userspace-only:
56 And profiled with 'perf report' e.g.
76 selected for reporting. e.g. sample every microsecond
133 An enhancement has been made to allow default "config" e.g. the option
190 perf_event_attr is displayed if the -vv option is used e.g.
252 		valid values e.g. bit 2 set means value 2 is valid.
259 		e.g. value 3 means 16KiB bytes between PSBs
262 		will give a list of valid values e.g.
302 		valid values e.g. bit 2 set means value 2 is valid.
308 		e.g. value 3 means one eighth of CTC-frequency
314 		will give a list of valid values e.g.
347 		valid values e.g. bit 2 set means value 2 is valid.
355 		e.g. value 4 means 8 CPU cycles must pass before a CYC packet
357 		packet is sent, not at, e.g. every 8 CPU cycles.
360 		will give a list of valid values e.g.
382 Optionally it can be followed by the snapshot size e.g.
392 The snapshot size is displayed if the option -vv is used e.g.
400 Intel PT buffer size is specified by an addition to the -m option e.g.
424 The mmap size and auxtrace mmap size are displayed if the -vv option is used e.g.
437 Full-trace mode traces continuously e.g.
441 Snapshot mode captures the available data when a signal is sent e.g.
567 decoding.  sched_switch events are automatically added. e.g. the second event
673 	g	synthesize a call chain (use with i or x)
694 In addition, the period of the "instructions" event can be specified. e.g.
717 transactions events can be specified. e.g.
723 transactions events can be specified. e.g.
764 removed and replaced with the synthesized events. e.g.