125 	dev_dbg(&pdev->dev, "isr: Rx dpll %s \n",  in spdif_irq_dpll_lock()
137 	dev_dbg(&pdev->dev, "isr: receiver found illegal symbol\n");  in spdif_irq_sym_error()
168 	dev_dbg(&pdev->dev, "isr: %c Channel receive register full\n", name);  in spdif_irq_uqrx_full()
189 	dev_dbg(&pdev->dev, "isr: U/Q Channel sync found\n");  in spdif_irq_uq_sync()
207 	dev_dbg(&pdev->dev, "isr: U/Q Channel framing error\n");  in spdif_irq_uq_err()
245 		dev_dbg(&pdev->dev, "isr: Tx FIFO under/overrun\n");  in spdif_isr()
248 		dev_dbg(&pdev->dev, "isr: Tx FIFO resync\n");  in spdif_isr()
251 		dev_dbg(&pdev->dev, "isr: cstatus new\n");  in spdif_isr()
254 		dev_dbg(&pdev->dev, "isr: validity flag no good\n");  in spdif_isr()
260 		dev_dbg(&pdev->dev, "isr: receiver found parity bit error\n");  in spdif_isr()
266 		dev_dbg(&pdev->dev, "isr: U Channel receive register overrun\n");  in spdif_isr()
272 		dev_dbg(&pdev->dev, "isr: Q Channel receive register overrun\n");  in spdif_isr()
281 		dev_dbg(&pdev->dev, "isr: Rx FIFO under/overrun\n");  in spdif_isr()
284 		dev_dbg(&pdev->dev, "isr: Rx FIFO resync\n");  in spdif_isr()
291 		dev_dbg(&pdev->dev, "isr: Tx FIFO empty\n");  in spdif_isr()
295 		dev_dbg(&pdev->dev, "isr: Rx FIFO full\n");  in spdif_isr()
346 	dev_dbg(&pdev->dev, "STCSCH: 0x%06x\n", ch_status);  in spdif_write_channel_status()
351 	dev_dbg(&pdev->dev, "STCSCL: 0x%06x\n", ch_status);  in spdif_write_channel_status()
437 	dev_dbg(&pdev->dev, "expected clock rate = %d\n",  in spdif_set_sample_rate()
439 	dev_dbg(&pdev->dev, "actual clock rate = %ld\n",  in spdif_set_sample_rate()
452 	dev_dbg(&pdev->dev, "set sample rate to %dHz for %dHz playback\n",  in spdif_set_sample_rate()
827 	dev_dbg(&pdev->dev, "FreqMeas: %d\n", freqmeas);  in spdif_get_rxclk_rate()
828 	dev_dbg(&pdev->dev, "BusclkFreq: %lld\n", busclk_freq);  in spdif_get_rxclk_rate()
829 	dev_dbg(&pdev->dev, "RxRate: %lld\n", tmpval64);  in spdif_get_rxclk_rate()
1189 	dev_dbg(&pdev->dev, "use rxtx%d as tx clock source for %dHz sample rate\n",  in fsl_spdif_probe_txclk()
1191 	dev_dbg(&pdev->dev, "use txclk df %d for %dHz sample rate\n",  in fsl_spdif_probe_txclk()
1194 		dev_dbg(&pdev->dev, "use sysclk df %d for %dHz sample rate\n",  in fsl_spdif_probe_txclk()
1196 	dev_dbg(&pdev->dev, "the best rate for %dHz sample rate is %dHz\n",  in fsl_spdif_probe_txclk()