Lines Matching refs:controller
12 Enable this option to support this chip in host controller mode.
22 "SuperSpeed" host controller hardware.
49 Say 'Y' to enable the support for the xHCI host controller
57 Say 'Y' to enable the support for the xHCI host controller
66 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
67 If your USB host controller supports USB 2.0, you will likely want to
73 connect to a companion controller. If you configure EHCI, you should
89 controller is needed. It's safe to say "y" even if your
90 controller doesn't support this feature.
126 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
132 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
136 bool "Use Xilinx usb host EHCI controller core"
141 Xilinx xps USB host controller core is EHCI compliant and has
147 tristate "Support for Freescale PPC on-chip EHCI USB controller"
155 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
167 Enables support for the on-chip EHCI controller on
171 tristate "Support for Marvell EBU on-chip EHCI USB controller"
175 Enables support for the on-chip EHCI controller on Marvell's
179 Marvell PXA/MMP USB controller" for those.
182 tristate "Support for ST SPEAr on-chip EHCI USB controller"
186 Enables support for the on-chip EHCI controller on
190 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
195 Enable support for the on-chip EHCI controller found on
199 tristate "Support for Atmel on-chip EHCI USB controller"
203 Enables support for the on-chip EHCI controller on
207 tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
211 Enables support for the USB Host controller present on the
228 bool "EHCI support for PPC USB controller on OF platform bus"
232 Enables support for the USB controller present on the PowerPC
236 bool "EHCI support for SuperH USB controller"
239 Enables support for the on-chip EHCI controller on the SuperH.
240 If you use the PCI EHCI controller, this option is not necessary.
246 Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
249 bool "EHCI support for Marvell PXA/MMP USB controller"
254 USB SPH and OTG controller. SPH is a single port host, and it can
255 only be EHCI host. OTG is controller that can switch to host mode.
257 controller used by the EBU-type SoCs including Orion, Kirkwood,
259 on-chip EHCI USB controller" for those.
265 Enables support for the W90X900 USB controller
275 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
289 Enables support for the built-in EHCI controller present
312 controller. It is needed for high-speed (480Mbit/sec)
321 The OXU210HP is an USB host/OTG/device controller. Enable this
344 Supports the Philips ISP1362 chip as a host controller
355 Faraday FOTG210 is an OTG controller which can be configured as
377 USB 1.1 host controller hardware. It does more in hardware than Intel's
378 UHCI specification. If your USB host controller follows the OHCI spec,
380 USB controller from Intel or VIA, this is appropriate. If your host
381 controller doesn't use PCI, this is probably appropriate. For a PCI
383 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
396 Enables support for the OHCI controller on OMAP1/2 chips.
399 tristate "Support for ST SPEAr on-chip OHCI USB controller"
403 Enables support for the on-chip OHCI controller on
407 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
412 Enable support for the on-chip OHCI controller found on
420 Enables support for the on-chip OHCI controller on
424 tristate "Support for LPC on-chip OHCI USB controller"
429 Enables support for the on-chip OHCI controller on
433 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
437 Enables support for the on-chip OHCI controller on
441 tristate "Support for Atmel on-chip OHCI USB controller"
445 Enables support for the on-chip OHCI controller on
453 Enables support for the on-chip OHCI controller on
463 controller. This driver cannot currently be a loadable
475 Enables support for the built-in OHCI controller present on the
506 Enables support for PCI-bus plug-in USB controller cards.
528 bool "OHCI support for SuperH USB controller (DEPRECATED)"
535 Enables support for the on-chip OHCI controller on the SuperH.
536 If you use the PCI OHCI controller, this option is not necessary.
542 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
552 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
576 controller. It is needed for low-speed USB 1.0 device
587 host controller). If your USB host controller conforms to this
592 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
636 for PC cards that contain an OHCI host controller. Typical PC cards
639 controller.
647 controller driver that talks to the OHCI controller within the
661 The SL811HS is a single-port USB controller that supports either
663 board has this chip, and you want to use it as a host controller.
692 The R8A66597 is a USB 2.0 host and peripheral controller.
695 to use it as a host controller. If unsure, say N.
704 The Renesas USBHS is a USB 2.0 host and peripheral controller.
707 to use it as a host controller. If unsure, say N.
754 Enable support for the EHCI and OCHI host controller on an bcma bus.
766 Enable support for the EHCI and OCHI host controller on an bcma bus.
776 supported by the host controller drivers.
779 (EHSET) for EHCI host controller hardware, specifically the "Single