Lines Matching refs:USB
2 # USB Host Controller Drivers
4 comment "USB Host Controller Drivers"
10 host/peripheral/OTG USB controllers.
19 tristate "xHCI HCD (USB 3.0) support"
21 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
63 tristate "EHCI HCD (USB 2.0) support"
65 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
67 If your USB host controller supports USB 2.0, you will likely want to
71 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
74 probably configure the OHCI (for NEC and some other vendors) USB Host
102 (TT) in USB 2.0 hubs. Without this, only one transfer will be
107 highspeed USB hub which is connected to a highspeed USB Host
126 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
132 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
141 Xilinx xps USB host controller core is EHCI compliant and has
147 tristate "Support for Freescale PPC on-chip EHCI USB controller"
152 Variation of ARC USB block used in some Freescale chips.
155 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
159 Variation of ARC USB block used in some Freescale chips.
171 tristate "Support for Marvell EBU on-chip EHCI USB controller"
179 Marvell PXA/MMP USB controller" for those.
182 tristate "Support for ST SPEAr on-chip EHCI USB controller"
190 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
199 tristate "Support for Atmel on-chip EHCI USB controller"
207 tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
211 Enables support for the USB Host controller present on the
224 This driver enables support for the internal USB Host Controllers
228 bool "EHCI support for PPC USB controller on OF platform bus"
232 Enables support for the USB controller present on the PowerPC
236 bool "EHCI support for SuperH USB controller"
249 bool "EHCI support for Marvell PXA/MMP USB controller"
254 USB SPH and OTG controller. SPH is a single port host, and it can
259 on-chip EHCI USB controller" for those.
265 Enables support for the W90X900 USB controller
276 It is needed for high-speed (480Mbit/sec) USB 2.0 device
313 USB 2.0 device support. All CN6XXX based chips with USB are
321 The OXU210HP is an USB host/OTG/device controller. Enable this
325 implement OTG nor USB device controllers.
333 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
353 depends on USB
363 tristate "MAX3421 HCD (USB-over-SPI) support"
364 depends on USB && SPI
366 The Maxim MAX3421E chip supports standard USB 2.0-compliant
374 tristate "OHCI HCD (USB 1.1) support"
377 USB 1.1 host controller hardware. It does more in hardware than Intel's
378 UHCI specification. If your USB host controller follows the OHCI spec,
380 USB controller from Intel or VIA, this is appropriate. If your host
383 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
399 tristate "Support for ST SPEAr on-chip OHCI USB controller"
407 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
424 tristate "Support for LPC on-chip OHCI USB controller"
433 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
441 tristate "Support for Atmel on-chip OHCI USB controller"
467 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
484 Enables support for big-endian USB controllers present on the
492 Enables support for little-endian USB controllers present on the
501 tristate "OHCI support for PCI-bus USB controllers"
506 Enables support for PCI-bus plug-in USB controller cards.
520 Broadcom USB OHCI core.
528 bool "OHCI support for SuperH USB controller (DEPRECATED)"
553 It is needed for low-speed USB 1.0 device support.
576 controller. It is needed for low-speed USB 1.0 device
577 support. All CN6XXX based chips with USB are supported.
586 accessing the USB hardware in the PC (which is also called the USB
587 host controller). If your USB host controller conforms to this
615 tristate "Freescale QE USB Host Controller support"
620 This driver enables support for Freescale QE USB Host Controller
622 Full and Low Speed USB.
625 bool "Freescale QE USB Host Controller debug support"
635 The U132 adapter is a USB to CardBus adapter specifically designed
645 USB client driver that interfaces to the FTDI chip within ELAN's
646 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
650 This driver has been tested with a CardBus OHCI USB adapter, and
651 worked with a USB PEN Drive inserted into the first USB port of
661 The SL811HS is a single-port USB controller that supports either
692 The R8A66597 is a USB 2.0 host and peripheral controller.
704 The Renesas USBHS is a USB 2.0 host and peripheral controller.
713 tristate "Wireless USB Host Controller Interface (WHCI) driver"
714 depends on PCI && USB && UWB
718 A driver for PCI-based Wireless USB Host Controllers that are
726 depends on USB && UWB
730 This driver enables you to connect Wireless USB devices to
731 your system using a Host Wire Adaptor USB dongle. This is an
733 your machine via USB (specified in WUSB1.0).
742 This driver enables support for the on-chip USB host in the
781 or embedded hosts that need to undergo USB-IF compliance testing with
786 their USB hardware designs. It is not needed for normal use. If