84 static struct s3c2410_udc_mach_info *udc_info;  variable
1451 	if (udc_info && (udc_info->udc_command ||  in s3c2410_udc_set_pullup()
1452 		gpio_is_valid(udc_info->pullup_pin))) {  in s3c2410_udc_set_pullup()
1499 	value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0;  in s3c2410_udc_vbus_irq()
1500 	if (udc_info->vbus_pin_inverted)  in s3c2410_udc_vbus_irq()
1513 	if (udc_info && udc_info->vbus_draw) {  in s3c2410_vbus_draw()
1514 		udc_info->vbus_draw(ma);  in s3c2410_vbus_draw()
1538 	if (!udc_info)  in s3c2410_udc_command()
1541 	if (udc_info->udc_command) {  in s3c2410_udc_command()
1542 		udc_info->udc_command(cmd);  in s3c2410_udc_command()
1543 	} else if (gpio_is_valid(udc_info->pullup_pin)) {  in s3c2410_udc_command()
1556 		value ^= udc_info->pullup_pin_inverted;  in s3c2410_udc_command()
1558 		gpio_set_value(udc_info->pullup_pin, value);  in s3c2410_udc_command()
1801 	udc_info = dev_get_platdata(&pdev->dev);  in s3c2410_udc_probe()
1833 	if (udc_info && udc_info->vbus_pin > 0) {  in s3c2410_udc_probe()
1834 		retval = gpio_request(udc_info->vbus_pin, "udc vbus");  in s3c2410_udc_probe()
1840 		irq = gpio_to_irq(udc_info->vbus_pin);  in s3c2410_udc_probe()
1864 	if (udc_info && !udc_info->udc_command &&  in s3c2410_udc_probe()
1865 		gpio_is_valid(udc_info->pullup_pin)) {  in s3c2410_udc_probe()
1867 		retval = gpio_request_one(udc_info->pullup_pin,  in s3c2410_udc_probe()
1868 				udc_info->vbus_pin_inverted ?  in s3c2410_udc_probe()
1892 	if (udc_info && !udc_info->udc_command &&  in s3c2410_udc_probe()
1893 			gpio_is_valid(udc_info->pullup_pin))  in s3c2410_udc_probe()
1894 		gpio_free(udc_info->pullup_pin);  in s3c2410_udc_probe()
1896 	if (udc_info && udc_info->vbus_pin > 0)  in s3c2410_udc_probe()
1897 		free_irq(gpio_to_irq(udc_info->vbus_pin), udc);  in s3c2410_udc_probe()
1899 	if (udc_info && udc_info->vbus_pin > 0)  in s3c2410_udc_probe()
1900 		gpio_free(udc_info->vbus_pin);  in s3c2410_udc_probe()
1927 	if (udc_info && !udc_info->udc_command &&  in s3c2410_udc_remove()
1928 		gpio_is_valid(udc_info->pullup_pin))  in s3c2410_udc_remove()
1929 		gpio_free(udc_info->pullup_pin);  in s3c2410_udc_remove()
1931 	if (udc_info && udc_info->vbus_pin > 0) {  in s3c2410_udc_remove()
1932 		irq = gpio_to_irq(udc_info->vbus_pin);  in s3c2410_udc_remove()