239 	DBG(dev, "------- Device registers -------\n");  in print_regs()
240 	DBG(dev, "dev config     = %08x\n", readl(&dev->regs->cfg));  in print_regs()
241 	DBG(dev, "dev control    = %08x\n", readl(&dev->regs->ctl));  in print_regs()
242 	DBG(dev, "dev status     = %08x\n", readl(&dev->regs->sts));  in print_regs()
243 	DBG(dev, "\n");  in print_regs()
244 	DBG(dev, "dev int's      = %08x\n", readl(&dev->regs->irqsts));  in print_regs()
245 	DBG(dev, "dev intmask    = %08x\n", readl(&dev->regs->irqmsk));  in print_regs()
246 	DBG(dev, "\n");  in print_regs()
247 	DBG(dev, "dev ep int's   = %08x\n", readl(&dev->regs->ep_irqsts));  in print_regs()
248 	DBG(dev, "dev ep intmask = %08x\n", readl(&dev->regs->ep_irqmsk));  in print_regs()
249 	DBG(dev, "\n");  in print_regs()
250 	DBG(dev, "USE DMA        = %d\n", use_dma);  in print_regs()
252 		DBG(dev, "DMA mode       = PPBNDU (packet per buffer "  in print_regs()
256 		DBG(dev, "DMA mode       = PPBDU (packet per buffer "  in print_regs()
261 		DBG(dev, "DMA mode       = BF (buffer fill mode)\n");  in print_regs()
266 	DBG(dev, "-------------------------------------------------------\n");  in print_regs()
296 	DBG(dev, "udc_enable_ep0_interrupts()\n");  in udc_enable_ep0_interrupts()
313 	DBG(dev, "enable device interrupts for setup data\n");  in udc_enable_dev_setup_interrupts()
360 		DBG(ep->dev, "NAK could not be cleared for ep%d\n", num);  in UDC_QUEUE_CNAK()
388 	DBG(dev, "udc_ep_enable() ep %d\n", ep->num);  in udc_ep_enable()
491 	DBG(dev, "%s enabled\n", usbep->name);  in udc_ep_enable()
552 	DBG(ep->dev, "Disable ep-%d\n", ep->num);  in udc_ep_disable()
618 	DBG(dev, "free chain req = %p\n", req);  in udc_free_dma_chain()
787 			DBG(ep->dev,  in udc_rxfifo_read()
947 				DBG(ep->dev, "Out of DMA memory\n");  in prep_dma()
1269 				DBG(dev, "udc_queue(): pending bytes in "  in udc_queue()
1399 					DBG(ep->dev, "start polltimer\n");  in udc_set_halt()
1450 	DBG(dev, "UDC initiates remote wakeup\n");  in udc_remote_wakeup()
1514 	DBG(dev, "udc_basic_init()\n");  in udc_basic_init()
1581 	DBG(dev, "udc_setup_endpoints()\n");  in udc_setup_endpoints()
1709 	DBG(dev, "Tasklet disconnect\n");  in udc_tasklet_disconnect()
1751 	DBG(dev, "Soft reset\n");  in udc_soft_reset()
1887 	DBG(dev, "activate_control_endpoints\n");  in activate_control_endpoints()
2068 	DBG(dev, "CNAK pending queue processing\n");  in udc_process_cnak_queue()
2071 			DBG(dev, "CNAK pending for ep%d\n", tmp);  in udc_process_cnak_queue()
2082 		DBG(dev, "CNAK pending for ep%d\n", UDC_EP0OUT_IX);  in udc_process_cnak_queue()
2138 			DBG(dev, "BNA ep%dout occurred - DESPTR = %x\n",  in udc_data_out_isr()
2245 					DBG(dev, "%s: rx %db, space=%db\n",  in udc_data_out_isr()
2599 			DBG(dev, "MSC Reset\n");  in udc_control_out_isr()
2743 			DBG(dev, "stall ep0in\n");  in udc_control_in_isr()
2828 		DBG(dev, "SET_CONFIG interrupt: config=%d\n", cfg);  in udc_dev_isr()
2887 		DBG(dev, "SET_INTERFACE interrupt: alt=%d intf=%d\n",  in udc_dev_isr()
2932 		DBG(dev, "USB Reset interrupt\n");  in udc_dev_isr()
2970 		DBG(dev, "DMA machine reset\n");  in udc_dev_isr()
2988 		DBG(dev, "USB Suspend interrupt\n");  in udc_dev_isr()
2998 		DBG(dev, "ENUM interrupt\n");  in udc_dev_isr()
3019 		DBG(dev, "USB SVC interrupt\n");  in udc_dev_isr()
3029 			DBG(dev, "USB Disconnect (session valid low)\n");  in udc_dev_isr()
3174 		DBG(dev, "can't get request data pool\n");  in init_dma_pools()
3185 		DBG(dev, "can't get stp request pool\n");  in init_dma_pools()