359 	void __iomem *dram_ptr = icom_port->dram;  in load_code()
390 	iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET;  in load_code()
410 	iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET;  in load_code()
418 		writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));  in load_code()
424 	       &(icom_port->dram->HDLCConfigReg));  in load_code()
425 	writeb(0x04, &(icom_port->dram->FlagFillIdleTimer));	/* 0.5 seconds */  in load_code()
426 	writeb(0x00, &(icom_port->dram->CmdReg));  in load_code()
427 	writeb(0x10, &(icom_port->dram->async_config3));  in load_code()
429 		ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2));  in load_code()
458 	writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length);  in load_code()
459 	writel(temp_pci, &icom_port->dram->mac_load_addr);  in load_code()
472 	writeb(START_DOWNLOAD, &icom_port->dram->sync);  in load_code()
477 		if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE)  in load_code()
487 	cable_id = readb(&icom_port->dram->cable_id);  in load_code()
505 		writeb(ICOM_DISABLE, &(icom_port->dram->disable));  in load_code()
526 	if (!icom_port->dram) {  in startup()
536 	raw_cable_id = readb(&icom_port->dram->cable_id);  in startup()
550 		raw_cable_id = readb(&icom_port->dram->cable_id);  in startup()
625 	cmdReg = readb(&icom_port->dram->CmdReg);  in shutdown()
627 		writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);  in shutdown()
667 		cmdReg = readb(&ICOM_PORT->dram->CmdReg);  in icom_write()
669 		       &ICOM_PORT->dram->CmdReg);  in icom_write()
670 		writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd);  in icom_write()
673 		readb(&ICOM_PORT->dram->StartXmitCmd);  in icom_write()
688 	status = readb(&icom_port->dram->isr);  in check_modem_status()
962 	local_osr = readb(&ICOM_PORT->dram->osr);  in icom_set_mctrl()
980 	writeb(local_osr, &ICOM_PORT->dram->osr);  in icom_set_mctrl()
990 	status = readb(&ICOM_PORT->dram->isr);  in icom_get_mctrl()
1004 	cmdReg = readb(&ICOM_PORT->dram->CmdReg);  in icom_stop_tx()
1005 	writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg);  in icom_stop_tx()
1013 	cmdReg = readb(&ICOM_PORT->dram->CmdReg);  in icom_start_tx()
1016 		       &ICOM_PORT->dram->CmdReg);  in icom_start_tx()
1032 		xdata = readb(&ICOM_PORT->dram->xchar);  in icom_send_xchar()
1035 			writeb(ch, &ICOM_PORT->dram->xchar);  in icom_send_xchar()
1038 			xdata = readb(&ICOM_PORT->dram->xchar);  in icom_send_xchar()
1051 	cmdReg = readb(&ICOM_PORT->dram->CmdReg);  in icom_stop_rx()
1052 	writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg);  in icom_stop_rx()
1062 	cmdReg = readb(&ICOM_PORT->dram->CmdReg);  in icom_break()
1064 		writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg);  in icom_break()
1066 		writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg);  in icom_break()
1094 	cmdReg = readb(&ICOM_PORT->dram->CmdReg);  in icom_close()
1095 	writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg);  in icom_close()
1173 	tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg));  in icom_set_termios()
1178 	writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg));  in icom_set_termios()
1215 	writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg);  in icom_set_termios()
1218 		if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) {  in icom_set_termios()
1237 	writeb(new_config3, &(ICOM_PORT->dram->async_config3));  in icom_set_termios()
1238 	writeb(new_config2, &(ICOM_PORT->dram->async_config2));  in icom_set_termios()
1239 	tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg));  in icom_set_termios()
1241 	writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg));  in icom_set_termios()
1242 	writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer));	/* 0.5 seconds */  in icom_set_termios()
1243 	writeb(0xFF, &(ICOM_PORT->dram->ier));	/* enable modem signal interrupts */  in icom_set_termios()
1246 	writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg);  in icom_set_termios()
1249 		if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) {  in icom_set_termios()
1259 	       &ICOM_PORT->dram->RcvStatusAddr);  in icom_set_termios()
1264 	       &ICOM_PORT->dram->XmitStatusAddr);  in icom_set_termios()
1266 	writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg);  in icom_set_termios()
1398 			icom_port->dram = icom_adapter->base_addr +  in icom_load_ports()
1466 			writeb(0x00, &icom_port->dram->osr);  in icom_remove_adapter()