Lines Matching refs:serial
14 the console before standard serial driver is probed. The console is
17 source "drivers/tty/serial/8250/Kconfig"
19 comment "Non-8250 serial port support"
22 tristate "ARM AMBA PL010 serial port support"
33 bool "Support for console on AMBA serial port"
49 tristate "ARM AMBA PL011 serial port support"
60 bool "Support for console on AMBA serial port"
84 the console before standard serial driver is probed. This is enabled
89 tristate "BCM1xxx on-chip DUART serial support"
94 Support for the asynchronous serial interface (DUART) included in
104 bool "Support for console on a BCM1xxx DUART serial port"
109 If you say Y here, it will be possible to use a serial port as the
117 bool "AT91 / AT32 on-chip serial port support"
126 bool "Support for console on AT91 / AT32 serial port"
136 bool "Support DMA transfers on AT91 / AT32 serial port"
141 and from the Atmel AT91 / AT32 serial port. In order to
159 The ttySn nodes are legally reserved for the 8250 serial driver
160 but are often misused by other serial drivers.
187 bool "Micrel KS8695 (Centaur) serial port support"
194 bool "Support for console on KS8695 (Centaur) serial port"
204 tristate "Meson serial port support"
222 tristate "CLPS711X serial port support"
231 bool "Support for console on CLPS711X serial port"
241 tristate "Samsung SoC serial support"
247 provide all of these ports, depending on how the serial port
264 serial driver
267 bool "Samsung SoC serial debug"
270 Add support for debugging the serial driver. Since this is
276 bool "Support for console on Samsung SoC serial port"
281 Allow selection of the S3C24XX on-board serial ports for use as
298 provide all of these ports, depending on how the serial port
302 bool "Support for console on SiRF SoC serial port"
314 tristate "NVIDIA Tegra20/30 SoC serial controller"
320 provide all of these ports, depending on how the serial port
346 bool "DECstation DZ serial driver"
351 DZ11-family serial controllers for DECstations and VAXstations,
355 bool "Support console on DECstation DZ serial driver"
360 If you say Y here, it will be possible to use a serial port as the
365 Note that the firmware uses ttyS3 as the serial console on
371 tristate "DECstation Z85C30 serial support"
376 Support for the Zilog 85C350 serial communications controller used
377 for serial ports in newer DECstation systems. These include the
385 bool "Support for console on a DECstation Z85C30 serial port"
390 If you say Y here, it will be possible to use a serial port as the
395 Note that the firmware uses ttyS1 as the serial console on the
401 tristate "DC21285 serial port support"
406 PCI bridge you can enable its onboard serial port by enabling this
410 bool "Console on DC21285 serial port"
414 If you have enabled the serial port on the 21285 footbridge you can
425 bool "Marvell MPSC serial port support"
429 Say Y here if you want to use the Marvell MPSC serial controller.
432 bool "Support for console on Marvell MPSC serial port"
436 Say Y here if you want to support a serial console on a Marvell MPSC.
439 bool "PXA serial port support"
444 can enable its onboard serial ports by enabling this option.
447 bool "Console on PXA serial port"
451 If you have enabled the serial port on the Intel XScale PXA
462 bool "SA1100 serial port support"
467 can enable its onboard serial port by enabling this option.
472 bool "Console on SA1100 serial port"
476 If you have enabled the serial port on the SA1100/SA1110 StrongARM
487 tristate "Blackfin serial port support"
498 bool "Console on Blackfin serial port"
507 This driver supports the built-in serial ports of the Blackfin family
573 tristate "IMX serial port support"
579 can enable its onboard serial port by enabling this option.
582 bool "Console on IMX serial port"
587 If you have enabled the serial port on the Freescale IMX
597 tristate "Xilinx uartlite serial port support"
601 Say Y here if you want to use the Xilinx uartlite serial controller.
607 bool "Support for console on Xilinx uartlite serial port"
623 tristate "Sun Zilog8530 serial support"
626 This driver supports the Zilog8530 serial ports found on many Sparc
627 systems. Say Y or M if you want to be able to these serial ports.
630 bool "Console on Sun Zilog8530 serial port"
633 If you would like to be able to use the Zilog8530 serial port
638 tristate "Sun SU serial support"
641 This driver supports the 8250 serial ports that run the keyboard and
643 to these serial ports.
646 bool "Console on Sun SU serial port"
649 If you would like to be able to use the SU serial port
659 Saying Y here will enable the hardware MUX serial driver for
673 bool "Support for console on serial MUX"
695 tristate "Sun Siemens SAB82532 serial support"
698 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
700 serial ports.
703 bool "Console on Sun Siemens SAB82532 serial port"
706 If you would like to be able to use the SAB82532 serial port
718 tristate "SGI Zilog8530 serial support"
722 This driver supports the Zilog8530 serial ports found on SGI
723 systems. Say Y or M if you want to be able to these serial ports.
726 bool "Console on SGI Zilog8530 serial port"
731 tristate "SuperH SCI(F) serial port support"
736 int "Maximum number of SCI(F) serial ports"
755 to use serial ports, say Y. Otherwise, say N.
758 bool "Enable PNX8XX0 serial console"
763 to use serial console, say Y. Otherwise, say N.
766 tristate "LPC32XX high speed serial port support"
770 Support for the LPC32XX high speed serial ports (up to 900kbps).
776 bool "Enable LPC32XX high speed UART serial console"
780 If you would like to be able to use one of the high speed serial
794 bool "68328 serial support"
797 This driver supports the built-in serial port of the Motorola 68328
801 bool "Support RTS/CTS on 68328 serial port"
805 bool "Coldfire serial support"
809 This serial driver supports the Freescale Coldfire serial ports.
812 int "Default baudrate for Coldfire serial ports"
817 ColdFire serial ports. The usual default varies from board to board,
821 bool "Coldfire serial console support"
825 Enable a ColdFire internal serial port to be the system console.
832 This driver supports the Zilog z85C30 serial ports found on
834 Say Y or M if you want to be able to these serial ports.
842 8250 serial port driver also uses these numbers, which means
850 access the built-in serial ports on powermacs will need to
862 bool "Console on Mac or PowerMac z85c30 serial port"
866 If you would like to be able to use the z85c30 serial port
871 tristate "CPM SCC/SMC serial port support"
875 This driver supports the SCC and SMC serial ports on Motorola
879 bool "Support for console on CPM SCC/SMC serial port"
895 bool "SGI Altix L1 serial console support"
901 controller serial port as your console (you want this!),
905 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
909 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
915 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
919 Select this options if you'd like to use one of the PSC serial port
923 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
937 This driver is for a family of multiport serial adapters
950 Say Y here if you want to use the M32R serial controller.
957 Say Y here if you want to support a serial console.
967 Say Y here if you want to use the M32R serial controller
993 bool "TX39XX/49XX SIO act as standard serial"
1011 a console on a serial port, say Y. Otherwise, say N.
1019 of cards which provide multiple serial ports. You would need
1030 tristate "SGI IOC4 controller serial support"
1035 and wish to use the serial ports on this card, say Y.
1039 tristate "SGI Altix IOC3 serial support"
1043 If you have an SGI Altix with an IOC3 serial card,
1047 bool "MSM on-chip serial port support"
1052 bool "MSM serial console support"
1058 bool "VIA VT8500 on-chip serial port support"
1063 bool "VIA VT8500 serial console support"
1068 bool "ETRAX FS serial port support"
1074 bool "ETRAX FS serial console support"
1079 tristate "NetX serial port support"
1084 can enable its onboard serial port by enabling this option.
1087 module will be called netx-serial.
1090 bool "Console on NetX serial port"
1094 If you have enabled the serial port on the Hilscher NetX SoC
1102 If you have a PowerPC based system that has serial ports
1108 tristate "OMAP serial port support"
1113 can enable its onboard serial ports by enabling this option.
1116 with the omap-serial driver. DMA support can be enabled from platform
1120 bool "Console on OMAP serial port"
1124 Select this option if you would like to use omap serial port as
1135 tristate "NWP serial port driver"
1141 This driver supports the cell network processor nwp serial
1145 bool "Console on NWP serial port"
1149 Support for Console on the NWP serial ports.
1152 bool "Lantiq serial driver"
1160 tristate "Freescale QUICC Engine serial port support"
1166 This driver supports the QE serial ports on Freescale embedded
1170 tristate "SCCNXP serial port support"
1178 bool "Console on SCCNXP serial port"
1182 Support for console on SCCNXP serial ports.
1188 tristate "SC16IS7xx serial support"
1192 This selects support for SC16IS7xx serial ports.
1305 bool "Console on BCM63xx serial port"
1310 If you have enabled the serial port on the BCM63xx CPU
1314 tristate "GRLIB APBUART serial support"
1318 Add support for the GRLIB APBUART serial port.
1321 bool "Console on GRLIB APBUART serial port"
1443 tristate "AR933X serial port support"
1454 bool "Console on AR933X serial port"
1461 int "Maximum number of AR933X serial ports"
1465 Set this to the number of serial ports you want the driver
1482 tristate "TILE-Gx on-chip serial port support"
1511 Set this to the number of serial ports you want the driver
1520 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1539 tristate "Freescale lpuart serial port support"
1546 bool "Console on Freescale lpuart serial port"
1551 If you have enabled the lpuart serial port on the Freescale SoCs,
1555 tristate "Conexant Digicolor CX92xxx USART serial port support"
1562 bool "Console on Conexant Digicolor serial port"
1566 If you have enabled the USART serial port on Conexant Digicolor
1570 tristate "ST ASC serial port support"
1598 tristate "Support for Spreadtrum serial"
1602 This enables the driver for the Spreadtrum's serial.
1610 Support for early debug console using Spreadtrum's serial. This enables
1611 the console before standard serial driver is probed. This is enabled
1616 tristate "STMicroelectronics STM32 serial port support"