Lines Matching refs:you

3 # you somehow have an implicit or explicit dependency on SERIAL_8250.
10 	  This selects whether you want to include the driver for the standard
20 	  [WARNING: Do not compile this driver as a module if you are using
25 	  BTW1: If you have a mouseman serial mouse which is not recognized by
28 	  BTW2: If you intend to use a software modem (also called Winmodem)
49 	  If you did not notice yet and/or you have userspace from pre-3.7, it
58 	  disable this feature if you only need legacy serial support.
66 	  If you say Y here, it will be possible to use a serial port as the
72 	  Even if you say Y here, the currently visible virtual console
74 	  you can alter that using a kernel command line option such as
79 	  If you don't have a VGA card installed and you say Y here, the
114 	  disable this feature if you only need legacy serial support.
143 	  Set this to the number of serial ports you want the driver
154 	  Set this to the maximum number of serial ports you want
163 	  If you wish to use any non-standard features of the standard "dumb"
176 	  Say Y here if you have dumb serial boards other than the four
177 	  standard COM 1/2/3/4 ports. This may happen if you have an AST
181 	  hardware. If you only use the standard COM 1/2/3/4 ports, you can
182 	  say N here to save some memory. You can also say Y if you have an
193 	  Say Y here if you have an AST FourPort serial board.
202 	  Say Y here if you have an Accent Async serial board.
211 	  Say Y here if you have a Boca serial board.  Please read the Boca
221 	  The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
232 	  Say Y here if you have a HUB6 serial board.
253 	  Say Y here if you want the kernel to try to guess which IRQ
271 	  If you have an Atomwide Serial card or Serial Port card for an Acorn
308 	  If you have a machine based on an Texas Instruments OMAP CPU you
325 	  argument. If you read this, please keep this option disabled and
326 	  instead update your kernel command line. If you prepare a kernel for a
327 	  distribution or other kind of larger user base then you probably want
345 	  If you have a LPC18xx/43xx based board and want to use the
352 	  If you have a Mediatek based board and want to use the
359 	  If you have a UniPhier based board and want to use the on-chip
368 	  If you have a system using an Ingenic SoC and wish to make use of