283 	serial_out(up, UART_DLL, value & 0xff);  in default_serial_dl_write()
284 	serial_out(up, UART_DLM, value >> 8 & 0xff);  in default_serial_dl_write()
420 		p->serial_out = hub6_serial_out;  in set_io_from_upio()
425 		p->serial_out = mem_serial_out;  in set_io_from_upio()
430 		p->serial_out = mem32_serial_out;  in set_io_from_upio()
435 		p->serial_out = mem32be_serial_out;  in set_io_from_upio()
441 		p->serial_out = au_serial_out;  in set_io_from_upio()
449 		p->serial_out = io_serial_out;  in set_io_from_upio()
465 		p->serial_out(p, offset, value);  in serial_port_out_sync()
469 		p->serial_out(p, offset, value);  in serial_port_out_sync()
478 	serial_out(up, UART_SCR, offset);  in serial_icr_write()
479 	serial_out(up, UART_ICR, value);  in serial_icr_write()
487 	serial_out(up, UART_SCR, offset);  in serial_icr_read()
500 		serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);  in serial8250_clear_fifos()
501 		serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |  in serial8250_clear_fifos()
503 		serial_out(p, UART_FCR, 0);  in serial8250_clear_fifos()
510 	serial_out(p, UART_FCR, p->fcr);  in serial8250_clear_and_reinit_fifos()
581 		serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0);  in serial8250_set_sleep()
589 			serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);  in serial8250_set_sleep()
590 			serial_out(p, UART_EFR, UART_EFR_ECB);  in serial8250_set_sleep()
591 			serial_out(p, UART_LCR, 0);  in serial8250_set_sleep()
593 		serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);  in serial8250_set_sleep()
595 			serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);  in serial8250_set_sleep()
596 			serial_out(p, UART_EFR, efr);  in serial8250_set_sleep()
597 			serial_out(p, UART_LCR, lcr);  in serial8250_set_sleep()
618 		serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);  in __enable_rsa()
638 			serial_out(up, UART_RSA_FRR, 0);  in enable_rsa()
661 			serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);  in disable_rsa()
684 	serial_out(up, UART_LCR, 0);  in size_fifo()
687 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in size_fifo()
689 	serial_out(up, UART_MCR, UART_MCR_LOOP);  in size_fifo()
690 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in size_fifo()
693 	serial_out(up, UART_LCR, 0x03);  in size_fifo()
695 		serial_out(up, UART_TX, count);  in size_fifo()
700 	serial_out(up, UART_FCR, old_fcr);  in size_fifo()
701 	serial_out(up, UART_MCR, old_mcr);  in size_fifo()
702 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in size_fifo()
704 	serial_out(up, UART_LCR, old_lcr);  in size_fifo()
720 	serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);  in autoconfig_read_divisor_id()
726 	serial_out(p, UART_LCR, old_lcr);  in autoconfig_read_divisor_id()
768 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in autoconfig_has_efr()
769 	serial_out(up, UART_EFR, UART_EFR_ECB);  in autoconfig_has_efr()
770 	serial_out(up, UART_LCR, 0x00);  in autoconfig_has_efr()
836 	serial_out(up, UART_SCR, 0xa5);  in autoconfig_8250()
838 	serial_out(up, UART_SCR, 0x5a);  in autoconfig_8250()
840 	serial_out(up, UART_SCR, scratch);  in autoconfig_8250()
898 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in autoconfig_16550a()
900 		serial_out(up, UART_EFR, 0xA8);  in autoconfig_16550a()
906 			serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
907 			serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in autoconfig_16550a()
910 			serial_out(up, UART_FCR, 0);  in autoconfig_16550a()
911 			serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
918 		serial_out(up, UART_EFR, 0);  in autoconfig_16550a()
926 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in autoconfig_16550a()
940 	serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
942 	serial_out(up, UART_LCR, 0xE0);  in autoconfig_16550a()
946 		serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
947 		serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP);  in autoconfig_16550a()
948 		serial_out(up, UART_LCR, 0xE0);  in autoconfig_16550a()
950 		serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
951 		serial_out(up, UART_MCR, status1);  in autoconfig_16550a()
956 			serial_out(up, UART_LCR, 0xE0);  in autoconfig_16550a()
964 			serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
979 	serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
980 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);  in autoconfig_16550a()
982 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in autoconfig_16550a()
983 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in autoconfig_16550a()
984 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);  in autoconfig_16550a()
986 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in autoconfig_16550a()
987 	serial_out(up, UART_LCR, 0);  in autoconfig_16550a()
1006 	serial_out(up, UART_IER, iersave & ~UART_IER_UUE);  in autoconfig_16550a()
1012 		serial_out(up, UART_IER, iersave | UART_IER_UUE);  in autoconfig_16550a()
1030 	serial_out(up, UART_IER, iersave);  in autoconfig_16550a()
1099 		serial_out(up, UART_IER, 0);  in autoconfig()
1108 		serial_out(up, UART_IER, 0x0F);  in autoconfig()
1113 		serial_out(up, UART_IER, scratch);  in autoconfig()
1138 		serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A);  in autoconfig()
1140 		serial_out(up, UART_MCR, save_mcr);  in autoconfig()
1158 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in autoconfig()
1159 	serial_out(up, UART_EFR, 0);  in autoconfig()
1160 	serial_out(up, UART_LCR, 0);  in autoconfig()
1162 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in autoconfig()
1189 	serial_out(up, UART_LCR, save_lcr);  in autoconfig()
1204 		serial_out(up, UART_RSA_FRR, 0);  in autoconfig()
1206 	serial_out(up, UART_MCR, save_mcr);  in autoconfig()
1210 		serial_out(up, UART_IER, UART_IER_UUE);  in autoconfig()
1212 		serial_out(up, UART_IER, 0);  in autoconfig()
1250 	serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);  in autoconfig_irq()
1253 	serial_out(up, UART_MCR, 0);  in autoconfig_irq()
1256 		serial_out(up, UART_MCR,  in autoconfig_irq()
1259 		serial_out(up, UART_MCR,  in autoconfig_irq()
1262 	serial_out(up, UART_IER, 0x0f);	/* enable all intrs */  in autoconfig_irq()
1267 	serial_out(up, UART_TX, 0xFF);  in autoconfig_irq()
1271 	serial_out(up, UART_MCR, save_mcr);  in autoconfig_irq()
1272 	serial_out(up, UART_IER, save_ier);  in autoconfig_irq()
1287 		serial_out(p, UART_IER, p->ier);  in __stop_tx()
1477 		serial_out(up, UART_TX, port->x_char);  in serial8250_tx_chars()
1493 		serial_out(up, UART_TX, xmit->buf[xmit->tail]);  in serial8250_tx_chars()
1890 		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in serial8250_do_startup()
2612 	serial_out(up, UART_FCR, up->fcr);  in do_set_rxtrig()