499 	if (p->capabilities & UART_CAP_FIFO) {  in serial8250_clear_fifos()
516 	if (!(p->capabilities & UART_CAP_RPM))  in serial8250_rpm_get()
524 	if (!(p->capabilities & UART_CAP_RPM))  in serial8250_rpm_put()
540 	if (!(p->capabilities & UART_CAP_RPM))  in serial8250_rpm_get_tx()
553 	if (!(p->capabilities & UART_CAP_RPM))  in serial8250_rpm_put_tx()
585 	if (p->capabilities & UART_CAP_SLEEP) {  in serial8250_set_sleep()
586 		if (p->capabilities & UART_CAP_EFR) {  in serial8250_set_sleep()
594 		if (p->capabilities & UART_CAP_EFR) {  in serial8250_set_sleep()
748 	up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;  in autoconfig_has_efr()
871 	up->capabilities |= UART_CAP_FIFO;  in autoconfig_16550a()
886 			up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |  in autoconfig_16550a()
904 			up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;  in autoconfig_16550a()
968 			up->capabilities |= UART_NATSEMI;  in autoconfig_16550a()
993 		up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;  in autoconfig_16550a()
1020 			up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;  in autoconfig_16550a()
1038 		up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |  in autoconfig_16550a()
1050 		up->capabilities |= UART_CAP_AFE;  in autoconfig_16550a()
1081 	up->capabilities = 0;  in autoconfig()
1192 	old_capabilities = up->capabilities;  in autoconfig()
1193 	up->capabilities = uart_config[port->type].flags;  in autoconfig()
1209 	if (up->capabilities & UART_CAP_UUE)  in autoconfig()
1216 	if (up->capabilities != old_capabilities) {  in autoconfig()
1220 		       up->capabilities);  in autoconfig()
1498 		if (up->capabilities & UART_CAP_HFIFO) {  in serial8250_tx_chars()
1515 	if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM))  in serial8250_tx_chars()
1781 	if (up->capabilities & UART_CAP_UUE)  in serial8250_put_poll_char()
1814 	if (!up->capabilities)  in serial8250_do_startup()
1815 		up->capabilities = uart_config[port->type].flags;  in serial8250_do_startup()
2218 	if (up->capabilities & UART_NATSEMI)  in serial8250_set_divisor()
2270 	if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {  in serial8250_do_set_termios()
2286 	if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {  in serial8250_do_set_termios()
2332 	if (up->capabilities & UART_CAP_UUE)  in serial8250_do_set_termios()
2334 	if (up->capabilities & UART_CAP_RTOIE)  in serial8250_do_set_termios()
2339 	if (up->capabilities & UART_CAP_EFR) {  in serial8250_do_set_termios()
2563 	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1)  in do_get_rxtrig()
2601 	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 ||  in do_set_rxtrig()
2781 		if (!up->capabilities)  in serial8250_set_defaults()
2782 			up->capabilities = uart_config[type].flags;  in serial8250_set_defaults()
2858 	if (up->capabilities & UART_CAP_UUE)  in serial8250_console_write()