348   printk(fmt, command, &config->mscp[command], config->mscp_free);  in log_ultrastor_abort()
371     printk("US14F: detect: called\n");  in ultrastor_14f_detect()
380       printk("Ultrastor I/O space already in use\n");  in ultrastor_14f_detect()
391 	printk("US14F: detect: testing port address %03X\n", config.port_address);  in ultrastor_14f_detect()
398 	    printk("US14F: detect: wrong product ID 0 - %02X\n", in_byte);  in ultrastor_14f_detect()
400 	    printk("US14F: detect: no adapter at port %03X\n", config.port_address);  in ultrastor_14f_detect()
415 	    printk("US14F: detect: wrong product ID 1 - %02X\n", in_byte);  in ultrastor_14f_detect()
417 	    printk("US14F: detect: no adapter at port %03X\n", config.port_address);  in ultrastor_14f_detect()
433 	printk("US14F: detect: no port address found!\n");  in ultrastor_14f_detect()
441     printk("US14F: detect: adapter found at port address %03X\n",  in ultrastor_14f_detect()
473 	printk("US14F: detect: not detected.\n");  in ultrastor_14f_detect()
482 	    printk("US14F: detect: consistency check failed\n");  in ultrastor_14f_detect()
493     printk("US14F: detect: detect succeeded\n"  in ultrastor_14f_detect()
515 	printk("Unable to allocate IRQ%u for UltraStor controller.\n",  in ultrastor_14f_detect()
520 	printk("Unable to allocate DMA channel %u for UltraStor controller.\n",  in ultrastor_14f_detect()
526     printk("UltraStor driver version" VERSION ".  Using %d SG lists.\n",  in ultrastor_14f_detect()
541   printk("US24F: detect");  in ultrastor_24f_detect()
560 	  printk("U24F: found disabled card in slot %u\n", i);  in ultrastor_24f_detect()
565       printk("U24F: found card in slot %u\n", i);  in ultrastor_24f_detect()
584 	  printk("U24F: invalid IRQ\n");  in ultrastor_24f_detect()
599       printk("US24F: detect: detect succeeded\n"  in ultrastor_24f_detect()
613 …      printk(KERN_WARNING "(ultrastor:) Could not register scsi device. Aborting registration.\n");  in ultrastor_24f_detect()
620 	  printk("Unable to allocate IRQ%u for UltraStor controller.\n",  in ultrastor_24f_detect()
640       printk("UltraStor driver version " VERSION ".  Using %d SG lists.\n",  in ultrastor_24f_detect()
789 	printk("USx4F: queuecommand: aborted\n");  in ultrastor_queuecommand_lck()
822     printk("USx4F: queuecommand: returning\n");  in ultrastor_queuecommand_lck()
900 	printk("Ux4F: abort while completed command pending\n");  in DEF_SCSI_QCMD()
930 	printk(out, ogm_status, ogm_addr, icm_status, icm_addr);  in DEF_SCSI_QCMD()
953 	printk("abort: command mismatch, %p != %p\n",  in DEF_SCSI_QCMD()
979     printk("US14F: reset: called\n");  in ultrastor_host_reset()
1066 	printk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);  in ultrastor_interrupt()
1079 	    printk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,  in ultrastor_interrupt()
1087 	    printk("UltraStor abort command failed\n");  in ultrastor_interrupt()
1109 	printk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);  in ultrastor_interrupt()
1159 	printk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",  in ultrastor_interrupt()
1167 	printk("US14F: interrupt: unexpected interrupt\n");  in ultrastor_interrupt()
1172       printk("Ux4F: multiple commands completed\n");  in ultrastor_interrupt()
1178     printk("USx4F: interrupt: returning\n");  in ultrastor_interrupt()