86 	outb(3, qbase + 3);	/* reset SCSI */  in ql_zap()
87 	outb(2, qbase + 3);	/* reset chip */  in ql_zap()
166 				outb(*request++, qbase + 4);  in ql_pdma()
226 		outb(2, qbase + 3);	/* reset chip */  in ql_icmd()
228 		outb(1, qbase + 3);	/* clear fifo */  in ql_icmd()
231 	outb(1, qbase + 8);	/* set for PIO pseudo DMA */  in ql_icmd()
232 	outb(0, qbase + 0xb);	/* disable ints */  in ql_icmd()
235 	outb(0x40, qbase + 0xb);	/* enable features */  in ql_icmd()
238 	outb(qlcfgc, qbase + 0xc);  in ql_icmd()
240 	outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8);  in ql_icmd()
241 	outb(qlcfg7, qbase + 7);  in ql_icmd()
242 	outb(qlcfg6, qbase + 6);  in ql_icmd()
243 	 /**/ outb(qlcfg5, qbase + 5);	/* select timer */  in ql_icmd()
244 	outb(qlcfg9 & 7, qbase + 9);	/* prescaler */  in ql_icmd()
246 	outb(scmd_id(cmd), qbase + 4);  in ql_icmd()
249 		outb(cmd->cmnd[i], qbase + 2);  in ql_icmd()
252 	outb(0x41, qbase + 3);	/* select and send command */  in ql_icmd()
300 		outb(1, qbase + 3);	/* clear fifo */  in ql_pcmd()
307 		outb(reqlen, qbase);	/* low-mid xfer cnt */  in ql_pcmd()
308 		outb(reqlen >> 8, qbase + 1);	/* low-mid xfer cnt */  in ql_pcmd()
309 		outb(reqlen >> 16, qbase + 0xe);	/* high xfer cnt */  in ql_pcmd()
310 		outb(0x90, qbase + 3);	/* command do xfer */  in ql_pcmd()
357 	outb(0x11, qbase + 3);	/* get status and message */  in ql_pcmd()
373 	outb(0x12, qbase + 3);	/* done, disconnect */  in ql_pcmd()
545 	outb(1, qbase + 8);	/* set for PIO pseudo DMA */  in qlogicfas408_setup()
547 	outb(0x40 | qlcfg8 | id, qbase + 8);	/* (ini) bus id, disable scsi rst */  in qlogicfas408_setup()
548 	outb(qlcfg5, qbase + 5);	/* select timer */  in qlogicfas408_setup()
549 	outb(qlcfg9, qbase + 9);	/* prescaler */  in qlogicfas408_setup()
552 	outb(3, qbase + 3);  in qlogicfas408_setup()
584 	outb(0, qbase + 0xb);	/* disable ints */  in qlogicfas408_disable_ints()