34 		DEBUG2(printk("scsi%ld: %s: Invalid function number, "  in ql4xxx_set_mac_number()
39 	DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__,  in ql4xxx_set_mac_number()
159 		DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",  in qla4xxx_get_sys_info()
169 		DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO "  in qla4xxx_get_sys_info()
237 				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "  in qla4xxx_wait_for_ip_config()
245 				DEBUG2(printk(KERN_INFO "scsi%ld: %s: "  in qla4xxx_wait_for_ip_config()
258 				DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "  in qla4xxx_wait_for_ip_config()
265 			DEBUG2(printk("scsi%ld: %s: Wait for additional "  in qla4xxx_wait_for_ip_config()
268 				DEBUG2(printk("IPv4 "));  in qla4xxx_wait_for_ip_config()
271 				DEBUG2(printk("IPv6LinkLocal "));  in qla4xxx_wait_for_ip_config()
274 				DEBUG2(printk("IPv6Addr0 "));  in qla4xxx_wait_for_ip_config()
277 				DEBUG2(printk("IPv6Addr1 "));  in qla4xxx_wait_for_ip_config()
278 			DEBUG2(printk("\"\n"));  in qla4xxx_wait_for_ip_config()
418 			DEBUG2(printk("scsi%ld: %s: unable to get firmware "  in qla4xxx_fw_ready()
424 			DEBUG2(printk("scsi%ld: %s: an unrecoverable error has"  in qla4xxx_fw_ready()
442 			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"  in qla4xxx_fw_ready()
448 			DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"  in qla4xxx_fw_ready()
460 					DEBUG2(printk(KERN_INFO "scsi%ld: %s:"  in qla4xxx_fw_ready()
466 					DEBUG2(printk(KERN_INFO "scsi%ld: %s: "  in qla4xxx_fw_ready()
516 		DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "  in qla4xxx_fw_ready()
530 		DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",  in qla4xxx_fw_ready()
534 		DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting "  in qla4xxx_fw_ready()
539 		DEBUG2(printk("scsi%ld: %s: FW initialized, but "  in qla4xxx_fw_ready()
569 		DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "  in qla4xxx_init_firmware()
603 	DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no,  in qla4xxx_config_nvram()
639 	DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n",  in qla4xxx_config_nvram()
700 	DEBUG(printk("scsi%d: %s: Start firmware from flash ROM\n",  in qla4xxx_start_firmware_from_flash()
717 	DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for "  in qla4xxx_start_firmware_from_flash()
734 		DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot "  in qla4xxx_start_firmware_from_flash()
742 		DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n",  in qla4xxx_start_firmware_from_flash()
753 		printk(KERN_INFO "scsi%ld: %s: Boot firmware failed "  in qla4xxx_start_firmware_from_flash()
771 				DEBUG2(printk("scsi%ld: %s: Waiting for "  in ql4xxx_lock_drvr_wait()
778 			DEBUG2(printk("scsi%ld: %s: Global Init Semaphore "  in ql4xxx_lock_drvr_wait()
809 	DEBUG2(printk("scsi%ld: %s: port_ctrl	= 0x%08X\n", ha->host_no,  in qla4xxx_start_firmware()
811 	DEBUG(printk("scsi%ld: %s: port_status = 0x%08X\n", ha->host_no,  in qla4xxx_start_firmware()
816 		DEBUG(printk("scsi%ld: %s: Hardware has already been "  in qla4xxx_start_firmware()
822 		DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= "  in qla4xxx_start_firmware()
839 				DEBUG2(printk("scsi%ld: %s: Get firmware "  in qla4xxx_start_firmware()
846 					DEBUG2(printk("scsi%ld: %s: Firmware "  in qla4xxx_start_firmware()
856 				DEBUG2(printk("scsi%ld: %s: Firmware in "  in qla4xxx_start_firmware()
865 		DEBUG(printk("scsi%ld: %s: H/W initialization hasn't been "  in qla4xxx_start_firmware()
870 	DEBUG(printk("scsi%ld: %s: Flags soft_rest=%d, config= %d\n ",  in qla4xxx_start_firmware()
873 		DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no,  in qla4xxx_start_firmware()
878 			DEBUG(printk("scsi%d: %s: Soft Reset failed!\n",  in qla4xxx_start_firmware()
902 		DEBUG(printk("scsi%ld: %s: Firmware has NOT started\n",  in qla4xxx_start_firmware()
998 	DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,  in qla4xxx_initialize_adapter()