359 	int port_base = dev->io_port;  in SYM53C500_intr()  local
369 	REG1(port_base);  in SYM53C500_intr()
370 	pio_status = inb(port_base + PIO_STATUS);  in SYM53C500_intr()
371 	REG0(port_base);  in SYM53C500_intr()
372 	status = inb(port_base + STAT_REG);  in SYM53C500_intr()
373 	DEB(seq_reg = inb(port_base + SEQ_REG));  in SYM53C500_intr()
374 	int_reg = inb(port_base + INT_REG);  in SYM53C500_intr()
375 	DEB(fifo_size = inb(port_base + FIFO_FLAGS) & 0x1f);  in SYM53C500_intr()
426 			outb(FLUSH_FIFO, port_base + CMD_REG);  in SYM53C500_intr()
427 			LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC));	/* Max transfer size */  in SYM53C500_intr()
428 			outb(TRANSFER_INFO | DMA_OP, port_base + CMD_REG);  in SYM53C500_intr()
431 				SYM53C500_pio_write(fast_pio, port_base,  in SYM53C500_intr()
434 			REG0(port_base);  in SYM53C500_intr()
445 			outb(FLUSH_FIFO, port_base + CMD_REG);  in SYM53C500_intr()
446 			LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC));	/* Max transfer size */  in SYM53C500_intr()
447 			outb(TRANSFER_INFO | DMA_OP, port_base + CMD_REG);  in SYM53C500_intr()
450 				SYM53C500_pio_read(fast_pio, port_base,  in SYM53C500_intr()
453 			REG0(port_base);  in SYM53C500_intr()
465 		outb(FLUSH_FIFO, port_base + CMD_REG);  in SYM53C500_intr()
466 		outb(INIT_CMD_COMPLETE, port_base + CMD_REG);  in SYM53C500_intr()
477 		outb(SET_ATN, port_base + CMD_REG);	/* Reject the message */  in SYM53C500_intr()
478 		outb(MSG_ACCEPT, port_base + CMD_REG);  in SYM53C500_intr()
485 		curSC->SCp.Status = inb(port_base + SCSI_FIFO);  in SYM53C500_intr()
486 		curSC->SCp.Message = inb(port_base + SCSI_FIFO);  in SYM53C500_intr()
488 		VDEB(printk("SCSI FIFO size=%d\n", inb(port_base + FIFO_FLAGS) & 0x1f));  in SYM53C500_intr()
492 			outb(SET_ATN, port_base + CMD_REG);	/* Reject message */  in SYM53C500_intr()
495 		outb(MSG_ACCEPT, port_base + CMD_REG);  in SYM53C500_intr()
553 	int port_base = SCpnt->device->host->io_port;  in SYM53C500_queue_lck()  local
574 	REG0(port_base);  in SYM53C500_queue_lck()
575 	outb(scmd_id(SCpnt), port_base + DEST_ID);	/* set destination */  in SYM53C500_queue_lck()
576 	outb(FLUSH_FIFO, port_base + CMD_REG);	/* reset the fifos */  in SYM53C500_queue_lck()
579 		outb(SCpnt->cmnd[i], port_base + SCSI_FIFO);  in SYM53C500_queue_lck()
581 	outb(SELECT_NO_ATN, port_base + CMD_REG);  in SYM53C500_queue_lck()
591 	int port_base = SCpnt->device->host->io_port;  in DEF_SCSI_QCMD()  local
595 	SYM53C500_int_host_reset(port_base);  in DEF_SCSI_QCMD()
704 	int irq_level, port_base;  in SYM53C500_config()  local
748 	port_base = link->resource[0]->start;  in SYM53C500_config()
752 	    port_base, irq_level, USE_FAST_PIO);)  in SYM53C500_config()
754 	chip_init(port_base);  in SYM53C500_config()
778 	host->unique_id = port_base;  in SYM53C500_config()
780 	host->io_port = port_base;  in SYM53C500_config()
804 	release_region(port_base, 0x10);  in SYM53C500_config()