Lines Matching refs:our

130 		 * long as one of our data FIFOs is active.
150 	 * still be data in our FIFOs draining to the host.  Complete
309 	 * tag set by the host so that our SCB dma engine
322 	/* Increment our position in the QINFIFO. */
365 	 * our batching and round-robin selection scheme 
502 	 * until we return to our idle loop), use a
570 	 * we are selecting with atn regardless of our packetized
573 	 * to our negotiation table entry for this selection will
624 		 * the point of selection until our idle
625 		 * loop determines that neither of our FIFOs
665  *	Continue to our normal state machine.
677 		 * the point of re-selection until our idle
678 		 * loop determines that neither of our FIFOs
745 	 * The whole list made it.  Clear our tail pointer to indicate
753 	 * TIDs is empty.  Use this knowledge to our advantage and
795 	 * If this is a packetized connection, return to our
796 	 * idle_loop and let our interrupt handler deal with
874 	 * Command retry.  Free our current FIFO and
1283  * store the SCB id for it in our untagged target table for lookup on
1359 	 * If we are asked to save our position at the end of the
1369 	 * All other information comes directly from our residual
1399 		 * an async phase due to our asserted ACK.  Each
1426  * data byte on the bus until we send our ACK.
1437 	 * see the interrupt and prepare our message response
1639 	 * phase, our transfer location has almost certainly been
1778  * allows us to update our notion of where we are
1784  * call our idle loop until it is able to load
1789  * our residual information is still correct from
1858 		 * we have already prefetched data into our FIFO (LQ/Data
1864 		 * a continuation of a transfer already setup in our FIFO
1883 		 * have lost the race (e.g. host paused us) and our attempts
1921  * disable the interrupt and allow our active routine to handle the