291 	VDEB(printk("dma: before count=%d   ", count));  in NCR53c406a_dma_setup()
305 	VDEB(printk("after count=%d\n", count));  in NCR53c406a_dma_setup()
469 		printk("NCR53c406a: BIOS signature not found\n");  in NCR53c406a_detect()
473 	DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base);  in NCR53c406a_detect()
488 				DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i]));  in NCR53c406a_detect()
490 				VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i]));  in NCR53c406a_detect()
494 					VDEB(printk("NCR53c406a: Sig register valid\n"));  in NCR53c406a_detect()
495 					VDEB(printk("port_base=0x%x\n", port_base));  in NCR53c406a_detect()
505 		printk("NCR53c406a: no available ports found\n");  in NCR53c406a_detect()
509 	DEB(printk("NCR53c406a detected\n"));  in NCR53c406a_detect()
518 			printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);  in NCR53c406a_detect()
524 	DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base));  in NCR53c406a_detect()
531 		printk("NCR53c406a: Unable to register host, giving up.\n");  in NCR53c406a_detect()
537 			printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);  in NCR53c406a_detect()
541 		DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));  in NCR53c406a_detect()
544 		DEB(printk("NCR53c406a: No interrupts detected\n"));  in NCR53c406a_detect()
545 		printk("NCR53c406a driver no longer supports polling interface\n");  in NCR53c406a_detect()
546 		printk("Please email linux-scsi@vger.kernel.org\n");  in NCR53c406a_detect()
549 		printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");  in NCR53c406a_detect()
553 		DEB(printk("NCR53c406a: Shouldn't get here!\n"));  in NCR53c406a_detect()
560 		printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);  in NCR53c406a_detect()
564 	DEB(printk("Allocated DMA channel %d\n", dma_chan));  in NCR53c406a_detect()
617 	DEB(printk("NCR53c406a: Setup called\n");  in NCR53c406a_setup()
621 		printk("NCR53c406a: Setup called too many times.  Bad LILO params?\n");  in NCR53c406a_setup()
626 		printk("NCR53c406a: Malformed command line\n");  in NCR53c406a_setup()
627 		printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");  in NCR53c406a_setup()
633 			DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base);  in NCR53c406a_setup()
637 		printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]);  in NCR53c406a_setup()
644 			DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);  in NCR53c406a_setup()
650 					DEB(printk("NCR53c406a: Specified irq %d\n", port_base);  in NCR53c406a_setup()
654 			printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);  in NCR53c406a_setup()
660 	DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)  in NCR53c406a_setup()
670 	DEB(printk("NCR53c406a_info called\n"));  in NCR53c406a_info()
700 	VDEB(printk("NCR53c406a_queue called\n"));  in NCR53c406a_queue_lck()
701 …DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->c…  in NCR53c406a_queue_lck()
705 	     printk("cmd[%d]=%02x  ", i, SCpnt->cmnd[i]));  in NCR53c406a_queue_lck()
706 	VDEB(printk("\n"));  in NCR53c406a_queue_lck()
733 	DEB(printk("NCR53c406a_reset called\n"));  in DEF_SCSI_QCMD()
756 	DEB(printk("NCR53c406a_biosparm called\n"));  in NCR53c406a_biosparm()
794 	VDEB(printk("NCR53c406a_intr called\n"));  in NCR53c406a_intr()
807 …printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_s…  in NCR53c406a_intr()
809 	printk("\n");  in NCR53c406a_intr()
811 	printk(", pio=%02x\n", pio_status);  in NCR53c406a_intr()
817 		DEB(printk("NCR53c406a: reset intr received\n"));  in NCR53c406a_intr()
825 		printk("NCR53C406A: Warning: PIO error!\n");  in NCR53c406a_intr()
834 		printk("NCR53c406a: Warning: parity error!\n");  in NCR53c406a_intr()
842 		printk("NCR53c406a: Warning: gross error!\n");  in NCR53c406a_intr()
850 		DEB(printk("NCR53c406a: disconnect intr received\n"));  in NCR53c406a_intr()
869 			VDEB(printk("NCR53c406a: Data-Out phase\n"));  in NCR53c406a_intr()
891 			VDEB(printk("NCR53c406a: Data-In phase\n"));  in NCR53c406a_intr()
910 		printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n");  in NCR53c406a_intr()
916 		VDEB(printk("NCR53c406a: Status phase\n"));  in NCR53c406a_intr()
923 		printk("NCR53c406a: WARNING: Reserved phase!!!\n");  in NCR53c406a_intr()
927 		DEB(printk("NCR53c406a: Message-Out phase\n"));  in NCR53c406a_intr()
935 		VDEB(printk("NCR53c406a: Message-In phase\n"));  in NCR53c406a_intr()
941 		VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));  in NCR53c406a_intr()
942 		DEB(printk("Status = %02x  Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message));  in NCR53c406a_intr()
946 			DEB(printk("Discarding SAVE_POINTERS message\n"));  in NCR53c406a_intr()