Lines Matching refs:driver

32 	  To compile this driver as a module, choose M here and read
85 To compile this driver as a module, choose M here and read
89 Do not compile this driver as a module if your root file system
91 In this case, do not compile the driver for your SCSI host adapter
104 To compile this driver as a module, choose M here and read
112 standard st driver, but instead need this special osst driver and
117 tapes (QIC-157) and can be driven by the standard driver st.
121 More info on the OnStream driver may be found on
126 To compile this driver as a module, choose M here and read
139 To compile this driver as a module, choose M here and read
169 driver software yourself. Please read the file
172 To compile this driver as a module, choose M here and read
181 This is a driver for SCSI media changers. Most common devices are
314 through an IP network. The driver uses the iSCSI protocol to transport
316 (the "initiator") and "targets". Architecturally, the iSCSI driver
319 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
321 To compile this driver as a module, choose M here: the
324 The userspace component needed to initialize the driver, documentation,
364 tristate "HP Smart Array SCSI driver"
369 This driver supports HP Smart Array Controllers (circa 2009).
370 It is a SCSI alternative to the cciss driver, which is a block
371 driver. Anyone wishing to use HP Smart Array controllers who
379 This driver supports the 9000 series 3ware SATA-RAID cards.
390 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
402 This driver supports the Western Digital 7000 SCSI host adapter
406 To compile this driver as a module, choose M here: the
413 This driver supports the ACARD SCSI host adapter.
415 To compile this driver as a module, choose M here: the
424 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
432 To compile this driver as a module, choose M here: the
446 To compile this driver as a module, choose M here: the
459 To compile this driver as a module, choose M here: the
466 This driver supports a variety of Dell, HP, Adaptec, IBM and
470 To compile this driver as a module, choose M here: the module
480 tristate "Marvell UMI driver"
483 Module for Marvell Universal Message Interface(UMI) driver
485 To compile this driver as a module, choose M here: the
492 This driver supports all of Adaptec's I2O based RAID controllers as
494 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
496 To compile this driver as a module, choose M here: the
505 This is a driver for all SCSI host adapters manufactured by
509 To compile this driver as a module, choose M here: the
521 To compile this driver as a module, choose M here: the
528 This driver supports all of ARECA's SATA/SAS RAID controller cards.
529 This is an ARECA-maintained driver by Erich Chen.
534 To compile this driver as a module, choose M here: the
549 To compile this driver as a module, choose M here; the module
564 To compile this driver as a module, choose M here: the
572 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
577 tristate "VMware PVSCSI driver support"
580 This driver supports VMware's para virtualized SCSI HBA.
581 To compile this driver as a module, choose M here: the
585 tristate "XEN SCSI frontend driver"
589 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
595 tristate "Microsoft Hyper-V virtual storage driver"
599 Select this option to enable the Hyper-V virtual storage driver.
628 To compile this driver as a module, choose M here and read
638 To compile this driver as a module, choose M here and read
656 To compile this driver as a module, choose M here: the
670 To compile this driver as a module, choose M here: the
677 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
686 To compile this driver as a module, choose M here: the
718 by the driver for each probed SCSI device is reported at boot time.
725 This driver supports all EATA-PIO protocol compliant SCSI Host
727 host adapters could also use this driver but are discouraged from
728 doing so, since this driver only supports hard disks and lacks
732 To compile this driver as a module, choose M here: the
748 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
749 controller support"). This Future Domain driver works with the older
752 To compile this driver as a module, choose M here: the
761 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
766 To compile this driver as a module, choose M here: the
775 This driver supports the 6Gb/s SAS capabilities of the storage
783 This is a driver for the old NCR 53c80 series of SCSI controllers
787 you should select the specific driver for that card rather than
795 To compile this driver as a module, choose M here: the
803 This is a driver for the old NCR 53c80 series of SCSI controllers
810 To compile this driver as a module, choose M here: the
818 You might as well try it out. Note that this driver will only probe
831 for more information. If this driver does not work correctly
835 To compile this driver as a module, choose M here: the
845 To compile this driver as a module, choose M here: the
855 To compile this driver as a module, choose M here: the
859 bool "enable driver internal trace"
863 If you say Y here, the driver will trace all commands issued
875 To compile this driver as a module, choose M here: the
886 To compile this driver as a module, choose M here: the
893 This driver supports older versions of IOMEGA's parallel port ZIP
905 For more information about this driver and how to use it you should
908 <http://www.tldp.org/docs.html#howto>. If you use this driver,
913 To compile this driver as a module, choose M here: the
920 This driver supports newer versions of IOMEGA's parallel port ZIP
932 For more information about this driver and how to use it you should
935 <http://www.tldp.org/docs.html#howto>. If you use this driver,
940 To compile this driver as a module, choose M here: the
981 To compile this driver as a module, choose M here: the
989 This is a driver for the MicroChannel Dual 700 card produced by
1001 This is a driver for the SCSI controller in the Lasi chip found in
1011 This is a driver for the onboard SCSI controller found in older
1023 This driver supports Promise SuperTrak EX series storage controllers.
1028 To compile this driver as a module, choose M here: the
1041 This driver supports the whole NCR53C8XX/SYM53C8XX family of
1045 controllers; you need to use the Fusion MPT driver for that.
1058 When set to 0, the driver will program the chip to only perform
1060 to addresses up to 1TB. When set to 2, the driver supports the
1079 driver will announce to the generic SCSI layer for devices
1091 possible. The driver supports up to 256 queued commands per device.
1108 This driver supports the IBM Power Linux family RAID adapters.
1113 bool "enable driver internal trace"
1117 If you say Y here, the driver will trace all commands issued
1126 If you say Y here, the driver will support adapter crash dump.
1146 This is a driver for the MicroChannel Quad 720 card produced by
1212 Note that 80 should normally be ok since the driver decreases the
1216 since the driver will get this information from the user set-up. It
1218 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1223 select the maximum value 80 allowing the driver to use the maximum
1251 To compile this driver as a module, choose M here: the
1258 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1262 This driver does NOT support the PCI versions of these cards. The
1263 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1266 Information about this driver is contained in
1271 To compile this driver as a module, choose M here: the
1280 To compile this driver as a module, choose M here: the
1287 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1290 driven by a different driver.
1292 To compile this driver as a module, choose M here: the
1304 This lpfc driver supports the Emulex LightPulse
1311 This makes debugging information from the lpfc driver
1319 This driver is for NCR53c710 based SCSI host adapters.
1328 adapter that comes with some HP scanners. This driver requires that
1331 are using isapnp then you need to compile this driver as a module
1333 of the configured card(s) should be passed to the driver. The format
1338 To compile this driver as a module, choose M here: the
1345 This driver supports PCI SCSI host adapters based on the ASIC
1348 This driver works, but is still in experimental status. So better
1353 To compile this driver as a module, choose M here: the
1357 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
1361 This driver supports PCI SCSI host adapters based on the Am53C974A
1364 This is a new implementation base on the generic esp_scsi driver.
1368 Note that this driver does NOT support Tekram DC390W/U/F, which are
1371 To compile this driver as a module, choose M here: the
1388 To compile this driver as a module, choose M here: the
1397 information about this hardware. If the driver doesn't work out of
1401 another driver for the same hardware: "UltraStor SCSI support",
1405 To compile this driver as a module, choose M here: the
1437 by the driver for each probed SCSI device is reported at boot time.
1445 adapter family. This driver is explained in section 3.12 of the
1451 Note that there is also another driver for the same hardware:
1454 To compile this driver as a module, choose M here: the
1465 To compile this driver as a module, choose M here: the
1473 This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
1481 This pseudo driver simulates one or more hosts (SCSI initiators),
1498 To compile this driver as a module, choose M here: the
1529 To compile this driver as a module, choose M here: the
1539 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1550 To compile this driver as a module, choose M here: the
1560 To compile this driver as a module, choose M here: the
1570 answer N. This driver does NOT work for the T-Rex series of
1573 To compile this driver as a module, choose M here: the
1584 To compile this driver as a module, choose M here: the
1613 To compile this driver as a module, choose M here: the
1616 This driver supports both styles of NCR integration into the
1656 To compile this driver as a module, choose M here: the module
1660 bool "WD33C93 SCSI driver for MVME147"
1668 tristate "NCR53C710 SCSI driver for MVME16x"
1677 tristate "NCR53C710 SCSI driver for BVME6000"
1709 This is the driver for the Sun ESP SCSI host adapter. The ESP
1714 To compile this driver as a module, choose M here: the
1718 tristate "FCP host bus adapter driver for IBM eServer zSeries"
1727 This driver is also available as a module. This module will be
1735 This driver supports the PMC SIERRA MaxRAID adapters.
1738 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
1742 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
1750 This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
1752 To compile this driver as a module, choose M here. The module will
1759 This is the virtual HBA driver for virtio. If the kernel will