Lines Matching refs:printk
90 #define DPRINTK printk
147 printk(KERN_DEBUG "change_mode: but there's no ECR!\n"); in change_mode()
300 printk(KERN_DEBUG in parport_pc_epp_read_data()
503 printk(KERN_DEBUG "Somebody wants the port\n"); in parport_pc_fifo_write_block_pio()
519 printk(KERN_DEBUG "FIFO write timed out\n"); in parport_pc_fifo_write_block_pio()
648 printk(KERN_DEBUG "DMA write timed out\n"); in parport_pc_fifo_write_block_dma()
668 printk(KERN_DEBUG "Somebody wants the port\n"); in parport_pc_fifo_write_block_dma()
728 printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", in parport_pc_compat_write_block_pio()
750 printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); in parport_pc_compat_write_block_pio()
772 printk(KERN_DEBUG in parport_pc_compat_write_block_pio()
812 printk(KERN_DEBUG "%s: PError timeout (%d) " in parport_pc_ecp_write_block_pio()
825 printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", in parport_pc_ecp_write_block_pio()
846 printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); in parport_pc_ecp_write_block_pio()
869 printk(KERN_DEBUG "%s: PE,1 timeout (%d) " in parport_pc_ecp_write_block_pio()
879 printk(KERN_DEBUG "%s: PE,2 timeout (%d) " in parport_pc_ecp_write_block_pio()
887 printk(KERN_DEBUG in parport_pc_ecp_write_block_pio()
984 printk(KERN_INFO in show_parconfig_smsc37c669()
992 printk(KERN_INFO in show_parconfig_smsc37c669()
998 printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n", in show_parconfig_smsc37c669()
1001 printk(KERN_INFO in show_parconfig_smsc37c669()
1015 printk(KERN_INFO "Super-IO: too many chips!\n"); in show_parconfig_smsc37c669()
1080 printk(KERN_INFO in show_parconfig_winbond()
1083 printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", in show_parconfig_winbond()
1086 printk("dma=none\n"); in show_parconfig_winbond()
1088 printk("dma=%d\n", cr74 & 0x07); in show_parconfig_winbond()
1089 printk(KERN_INFO in show_parconfig_winbond()
1092 printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", in show_parconfig_winbond()
1099 printk(KERN_INFO "Super-IO: too many chips!\n"); in show_parconfig_winbond()
1153 printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x " in decode_winbond()
1186 printk(KERN_INFO "SMSC chip at EFER=0x%x " in decode_smsc()
1321 printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n"); in detect_and_report_winbond()
1334 printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n"); in detect_and_report_smsc()
1346 printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n"); in detect_and_report_it87()
1360 printk(KERN_INFO "IT%04X SuperIO detected.\n", dev); in detect_and_report_it87()
1447 printk(KERN_INFO "parport 0x%lx (WARNING): CTR: " in parport_SPP_supported()
1466 printk(KERN_INFO "parport 0x%lx (WARNING): DATA: " in parport_SPP_supported()
1468 printk(KERN_INFO "parport 0x%lx: You gave this address, " in parport_SPP_supported()
1607 printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i); in parport_ECP_supported()
1621 printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", in parport_ECP_supported()
1644 printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n", in parport_ECP_supported()
1659 printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", in parport_ECP_supported()
1664 printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", in parport_ECP_supported()
1668 printk(KERN_WARNING "0x%lx: Unknown implementation ID\n", in parport_ECP_supported()
1677 printk(KERN_DEBUG "0x%lx: PWord is %d bits\n", in parport_ECP_supported()
1680 printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, in parport_ECP_supported()
1684 printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", in parport_ECP_supported()
1686 printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); in parport_ECP_supported()
1688 printk("%d", intrline[(configb >> 3) & 0x07]); in parport_ECP_supported()
1690 printk("<none or set by other means>"); in parport_ECP_supported()
1691 printk(" dma="); in parport_ECP_supported()
1693 printk("<none or set by other means>\n"); in parport_ECP_supported()
1695 printk("%d\n", configb & 0x07); in parport_ECP_supported()
2109 printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); in parport_pc_probe_port()
2111 printk(KERN_CONT " (0x%lx)", p->base_hi); in parport_pc_probe_port()
2122 printk(KERN_CONT ", irq %d", p->irq); in parport_pc_probe_port()
2146 printk(KERN_CONT ", dma %d", p->dma); in parport_pc_probe_port()
2149 printk(KERN_CONT ", using FIFO"); in parport_pc_probe_port()
2155 printk(KERN_CONT " ["); in parport_pc_probe_port()
2160 printk(KERN_CONT "%s%s", f ? "," : "", #x);\ in parport_pc_probe_port()
2176 printk(KERN_CONT "(,...)"); in parport_pc_probe_port()
2178 printk(KERN_CONT "]\n"); in parport_pc_probe_port()
2180 printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq); in parport_pc_probe_port()
2195 printk(KERN_WARNING "%s: irq %d in use, " in parport_pc_probe_port()
2206 printk(KERN_WARNING "%s: dma %d in use, " in parport_pc_probe_port()
2217 printk(KERN_WARNING "%s: " in parport_pc_probe_port()
2332 printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); in sio_ite_8872_probe()
2341 printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n"); in sio_ite_8872_probe()
2345 printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n"); in sio_ite_8872_probe()
2349 printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); in sio_ite_8872_probe()
2353 printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n"); in sio_ite_8872_probe()
2357 printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n"); in sio_ite_8872_probe()
2361 printk(KERN_INFO "parport_pc: unknown ITE887x\n"); in sio_ite_8872_probe()
2362 printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' " in sio_ite_8872_probe()
2398 printk(KERN_INFO in sio_ite_8872_probe()
2402 printk(", irq=%d", irq); in sio_ite_8872_probe()
2403 printk("\n"); in sio_ite_8872_probe()
2443 printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n"); in sio_via_probe()
2447 printk(KERN_DEBUG "parport_pc: setting SPP mode\n"); in sio_via_probe()
2451 printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n"); in sio_via_probe()
2456 printk(KERN_DEBUG "parport_pc: setting EPP mode\n"); in sio_via_probe()
2462 printk(KERN_DEBUG "parport_pc: setting ECP mode\n"); in sio_via_probe()
2467 printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n"); in sio_via_probe()
2473 printk(KERN_DEBUG in sio_via_probe()
2509 printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n", in sio_via_probe()
2514 printk(KERN_DEBUG in sio_via_probe()
2527 printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n"); in sio_via_probe()
2560 printk(KERN_INFO in sio_via_probe()
2581 printk(KERN_INFO in sio_via_probe()
2584 printk(", irq=%d", irq); in sio_via_probe()
2586 printk(", dma=%d", dma); in sio_via_probe()
2587 printk("\n"); in sio_via_probe()
2591 …printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n… in sio_via_probe()
2852 printk(KERN_DEBUG in parport_pc_pci_probe()
2857 printk(KERN_DEBUG in parport_pc_pci_probe()
3109 printk(KERN_ERR "parport: bad specifier `%s'\n", s); in parport_parse_param()
3131 printk(KERN_DEBUG in parport_init_mode_setup()
3199 printk(KERN_WARNING in parse_parport_params()
3212 printk(KERN_WARNING in parse_parport_params()
3254 printk(KERN_WARNING "parport=%s not understood\n", str); in parport_setup()
3259 printk(KERN_ERR "parport=%s ignored, too many ports\n", str); in parport_setup()