120 	DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",  in frob_econtrol()
147 		printk(KERN_DEBUG "change_mode: but there's no ECR!\n");  in change_mode()
300 				printk(KERN_DEBUG  in parport_pc_epp_read_data()
503 			printk(KERN_DEBUG "Somebody wants the port\n");  in parport_pc_fifo_write_block_pio()
519 				printk(KERN_DEBUG "FIFO write timed out\n");  in parport_pc_fifo_write_block_pio()
648 			printk(KERN_DEBUG "DMA write timed out\n");  in parport_pc_fifo_write_block_dma()
668 			printk(KERN_DEBUG "Somebody wants the port\n");  in parport_pc_fifo_write_block_dma()
728 		printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",  in parport_pc_compat_write_block_pio()
750 		printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);  in parport_pc_compat_write_block_pio()
772 		printk(KERN_DEBUG  in parport_pc_compat_write_block_pio()
812 			printk(KERN_DEBUG "%s: PError timeout (%d) "  in parport_pc_ecp_write_block_pio()
825 		printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",  in parport_pc_ecp_write_block_pio()
846 		printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);  in parport_pc_ecp_write_block_pio()
869 			printk(KERN_DEBUG "%s: PE,1 timeout (%d) "  in parport_pc_ecp_write_block_pio()
879 			printk(KERN_DEBUG "%s: PE,2 timeout (%d) "  in parport_pc_ecp_write_block_pio()
887 		printk(KERN_DEBUG  in parport_pc_ecp_write_block_pio()
1321 		printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");  in detect_and_report_winbond()
1334 		printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");  in detect_and_report_smsc()
1346 		printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n");  in detect_and_report_it87()
1607 		printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);  in parport_ECP_supported()
1621 			printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",  in parport_ECP_supported()
1677 		printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",  in parport_ECP_supported()
1680 		printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,  in parport_ECP_supported()
1684 		printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",  in parport_ECP_supported()
1686 		printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);  in parport_ECP_supported()
2315 	DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");  in sio_ite_8872_probe()
2381 	DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);  in sio_ite_8872_probe()
2382 	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",  in sio_ite_8872_probe()
2384 	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",  in sio_ite_8872_probe()
2443 	printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");  in sio_via_probe()
2447 		printk(KERN_DEBUG "parport_pc: setting SPP mode\n");  in sio_via_probe()
2451 		printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");  in sio_via_probe()
2456 		printk(KERN_DEBUG "parport_pc: setting EPP mode\n");  in sio_via_probe()
2462 		printk(KERN_DEBUG "parport_pc: setting ECP mode\n");  in sio_via_probe()
2467 		printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");  in sio_via_probe()
2473 		printk(KERN_DEBUG  in sio_via_probe()
2509 	printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",  in sio_via_probe()
2514 		printk(KERN_DEBUG  in sio_via_probe()
2852 			printk(KERN_DEBUG  in parport_pc_pci_probe()
2857 			printk(KERN_DEBUG  in parport_pc_pci_probe()
3131 	printk(KERN_DEBUG  in parport_init_mode_setup()