986 		dev_info(&udev->dev, "%s(%04x)   = 0x%02x, len %i\n",  in rtl8xxxu_read8()
1006 		dev_info(&udev->dev, "%s(%04x)  = 0x%04x, len %i\n",  in rtl8xxxu_read16()
1026 		dev_info(&udev->dev, "%s(%04x)  = 0x%08x, len %i\n",  in rtl8xxxu_read32()
1046 		dev_info(&udev->dev, "%s(%04x) = 0x%02x\n",  in rtl8xxxu_write8()
1065 		dev_info(&udev->dev, "%s(%04x) = 0x%04x\n",  in rtl8xxxu_write16()
1084 		dev_info(&udev->dev, "%s(%04x) = 0x%08x\n",  in rtl8xxxu_write32()
1123 	dev_info(&udev->dev,  in rtl8xxxu_writeN()
1164 		dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",  in rtl8xxxu_read_rfreg()
1176 		dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",  in rtl8xxxu_write_rfreg()
1230 			dev_info(dev, "H2C_EXT %04x\n",  in rtl8723a_h2c_cmd()
1235 		dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data));  in rtl8723a_h2c_cmd()
1525 		dev_info(&priv->udev->dev,  in rtl8723a_set_tx_power()
1669 	dev_info(dev,  in rtl8xxxu_print_chipinfo()
1676 	dev_info(dev, "RTL%s MAC: %pM\n", priv->chip_name, priv->mac_addr);  in rtl8xxxu_print_chipinfo()
1689 		dev_info(dev, "Unsupported test chip\n");  in rtl8xxxu_identify_chip()
1771 			dev_info(dev, "Unsupported USB TX end-points\n");  in rtl8xxxu_identify_chip()
1814 	dev_info(&priv->udev->dev, "Vendor: %.7s\n",  in rtl8723au_parse_efuse()
1816 	dev_info(&priv->udev->dev, "Product: %.41s\n",  in rtl8723au_parse_efuse()
1863 	dev_info(&priv->udev->dev, "Vendor: %.7s\n",  in rtl8192cu_parse_efuse()
1865 	dev_info(&priv->udev->dev, "Product: %.20s\n",  in rtl8192cu_parse_efuse()
1876 		dev_info(&priv->udev->dev,  in rtl8192cu_parse_efuse()
1880 			dev_info(&priv->udev->dev, "%02x: "  in rtl8192cu_parse_efuse()
2164 	dev_info(dev, "%s: Loading firmware %s\n", DRIVER_NAME, fw_name);  in rtl8xxxu_load_firmware()
2191 	dev_info(dev, "Firmware revision %i.%i (signature 0x%04x)\n",  in rtl8xxxu_load_firmware()
4469 				dev_info(dev, "%s: ASSOC no sta found\n",  in rtl8xxxu_bss_info_changed()
4476 				dev_info(dev, "%s: HT supported\n", __func__);  in rtl8xxxu_bss_info_changed()
4478 				dev_info(dev, "%s: VHT supported\n", __func__);  in rtl8xxxu_bss_info_changed()
4711 		dev_info(dev, "WLAN_ACTION_ADDBA_RESP: "  in rtl8xxxu_dump_action()
4723 		dev_info(dev, "WLAN_ACTION_ADDBA_REQ: "  in rtl8xxxu_dump_action()
4731 		dev_info(dev, "action frame %02x\n",  in rtl8xxxu_dump_action()
4776 		dev_info(dev, "%s: TX rate: %d (%d), pkt size %d\n",  in rtl8xxxu_tx()
5115 		dev_info(dev, "%s: Error %i\n", __func__, urb->status);  in rtl8xxxu_int_complete()
5192 		dev_info(dev,  in rtl8xxxu_config()
5388 		dev_info(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__);  in rtl8xxxu_ampdu_action()
5398 		dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);  in rtl8xxxu_ampdu_action()
5403 		dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",  in rtl8xxxu_ampdu_action()
5409 		dev_info(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);  in rtl8xxxu_ampdu_action()
5412 		dev_info(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__);  in rtl8xxxu_ampdu_action()
5654 		dev_info(&udev->dev,  in rtl8xxxu_probe()
5657 		dev_info(&udev->dev,  in rtl8xxxu_probe()
5737 		dev_info(&udev->dev, "Enabling HT_20_40 on the 2.4GHz band\n");  in rtl8xxxu_probe()
5779 	dev_info(&priv->udev->dev, "disconnecting\n");  in rtl8xxxu_disconnect()