Lines Matching refs:to

7 # is available by writing to the Free Software Foundation, Inc.,
22 	a) Copy sd8787.bin to /lib/firmware/mrvl/ directory,
45 	The above command can be used to connect to an AP with a particular SSID.
48 …Note: Every time before connecting to an AP scan command (iw dev mlan0 scan) should be used by use…
51 	This command will be used to disconnect from an AP.
55 	The command will be used to join or create an ibss. Optionally, operating frequency,
60 	The command will be used to leave an ibss network.
63 	The command will be used to get the connection status. The command will return parameters
75 	Mount debugfs to /debugfs mount point:
83 	The command will be used to change the regulatory domain.
86 	The command will be used to get current regulatory domain.
89 	This command is used to get driver info.
106 	num_tx_bytes = <number of bytes sent to device>
107 	num_rx_bytes = <number of bytes received from device and sent to kernel>
108 	num_tx_pkts = <number of packets sent to device>
109 	num_rx_pkts = <number of packets received from device and sent to kernel>
112 	num_tx_pkts_err = <number of Tx packets failed to send to device>
113 	num_rx_pkts_err = <number of Rx packets failed to receive from device>
120 	wmm_ac_vo = <number of packets sent to device from WMM AcVo queue>
121 	wmm_ac_vi = <number of packets sent to device from WMM AcVi queue>
122 	wmm_ac_be = <number of packets sent to device from WMM AcBE queue>
123 	wmm_ac_bk = <number of packets sent to device from WMM AcBK queue>
137 	last_cmd_id = <command id of the last several commands sent to device>
138 	last_cmd_act = <command action of the last several commands sent to device>
144 	num_cmd_h2c_fail = <number of commands failed to send to device>
145 	num_cmd_sleep_cfm_fail = <number of sleep confirm failed to send to device>
146 	num_tx_h2c_fail = <number of data packets failed to send to device>
150 	num_cmd_deauth = <number of deauthenticate commands sent to device>
153 	cmd_sent = <0/1, send command resources available/sending command to device>
154 	data_sent = <0/1, send data resources available/sending data to device>
157 	cmd_resp_received = <0/1, no cmd response to process/response received and yet to process>
158 	event_received = <0/1, no event to process/event received and yet to process>
167 	This command is used to read/write the adapter register.
176 		[value]:    value to be written
182 		                                    : Write 0x80000000 to MAC register
184 	This command is used to read the EEPROM contents of the card.
198 	This command is used to debug/simulate host sleep feature using
210 		[GPIO#]: pin number of GPIO used to wakeup the host.
215 			 acknowledge required) when GPIO is used to wakeup host.
225 					   to ack before sending wakeup event
228         This command is used to get the statistics available in the station.
234 	This command is used to dump driver information and firmware memory