232 		printk(KERN_DEBUG "%s: removed pending cmd_queue entry "  in prism2_clear_cmd_queue()
241 		printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after "  in prism2_clear_cmd_queue()
270 		printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n",  in hfa384x_cmd_issue()
284 		printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy "  in hfa384x_cmd_issue()
292 		printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - "  in hfa384x_cmd_issue()
335 		printk(KERN_DEBUG "%s: hfa384x_cmd called from interrupt "  in hfa384x_cmd()
341 		printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n",  in hfa384x_cmd()
429 		printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? "  in hfa384x_cmd()
438 		printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n",  in hfa384x_cmd()
446 		printk(KERN_DEBUG "%s: hfa384x_cmd: command was not "  in hfa384x_cmd()
455 			printk(KERN_WARNING "%s: interrupt delivery does not "  in hfa384x_cmd()
467 		printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, "  in hfa384x_cmd()
510 		printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n",  in hfa384x_cmd_callback()
570 		printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - "  in __hfa384x_cmd_no_wait()
612                 printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - "  in hfa384x_cmd_wait()
622 		printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n",  in hfa384x_cmd_wait()
674 			printk(KERN_DEBUG "%s: Command completion event, but "  in prism2_cmd_ev()
684 		printk(KERN_DEBUG "%s: Command completion event, but no "  in prism2_cmd_ev()
704 		printk(KERN_DEBUG "%s: Invalid command completion type %d\n",  in prism2_cmd_ev()
770 		printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n",  in hfa384x_setup_bap()
781 		printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n",  in hfa384x_setup_bap()
789 		printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error "  in hfa384x_setup_bap()
813 		printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI "  in hfa384x_get_rid()
829 		printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed "  in hfa384x_get_rid()
849 		printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: "  in hfa384x_get_rid()
863 			printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, "  in hfa384x_get_rid()
886 		printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI "  in hfa384x_set_rid()
913 		printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - "  in hfa384x_set_rid()
923 		printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE "  in hfa384x_set_rid()
979 		printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n",  in hfa384x_allocate_fid()
989 		printk("%s: fid allocate, len=%d - timeout\n", dev->name, len);  in hfa384x_allocate_fid()
1015 		printk(KERN_DEBUG "%s: reset port failed to disable port\n",  in prism2_reset_port()
1021 			printk(KERN_DEBUG "%s: reset port failed to enable "  in prism2_reset_port()
1031 		printk(KERN_DEBUG "%s: failed to restore fragmentation "  in prism2_reset_port()
1058 		printk(KERN_DEBUG "Could not get RID for component %s\n", txt);  in prism2_get_version_info()
1062 	printk(KERN_INFO "%s: %s: id=0x%02x v%d.%d.%d\n", dev->name, txt,  in prism2_get_version_info()
1085 			printk("%s: Port type setting to %d failed\n",  in prism2_setup_rids()
1097 			printk("%s: AP own SSID setting failed\n", dev->name);  in prism2_setup_rids()
1105 		printk("%s: MAC data length setting to %d failed\n",  in prism2_setup_rids()
1111 		printk("%s: Channel list read failed\n", dev->name);  in prism2_setup_rids()
1119 		printk(KERN_WARNING "%s: Channel setting out of range "  in prism2_setup_rids()
1127 		printk("%s: Channel setting to %d failed\n",  in prism2_setup_rids()
1135 		printk("%s: Beacon interval setting to %d failed\n",  in prism2_setup_rids()
1145 		printk("%s: DTIM period setting to %d failed\n",  in prism2_setup_rids()
1155 		printk(KERN_INFO "%s: Setting promiscuous mode (%d) failed\n",  in prism2_setup_rids()
1162 			printk("%s: Desired SSID setting failed\n", dev->name);  in prism2_setup_rids()
1184 			printk("%s: TXRateControl setting to %d failed\n",  in prism2_setup_rids()
1192 			printk("%s: cnfSupportedRates setting to %d failed\n",  in prism2_setup_rids()
1199 			printk("%s: cnfBasicRates setting to %d failed\n",  in prism2_setup_rids()
1205 			printk("%s: Create IBSS setting to 1 failed\n",  in prism2_setup_rids()
1215 		printk(KERN_INFO "%s: could not configure encryption\n",  in prism2_setup_rids()
1222 		printk(KERN_INFO "%s: could not set host roaming\n",  in prism2_setup_rids()
1228 		printk(KERN_INFO "%s: cnfEnhSecurity setting to 0x%x failed\n",  in prism2_setup_rids()
1239 			printk(KERN_INFO "%s: cnfThirty2Tally setting "  in prism2_setup_rids()
1251 		printk(KERN_INFO "%s: setting FragmentationThreshold to %d "  in prism2_setup_rids()
1257 		printk(KERN_INFO "%s: setting RTSThreshold to %d failed\n",  in prism2_setup_rids()
1264 		printk(KERN_INFO "%s: setting cnfAltRetryCount to %d failed\n",  in prism2_setup_rids()
1275 		printk(KERN_INFO "%s: setting ssnHandlingMode to 1 failed\n",  in prism2_setup_rids()
1282 		printk(KERN_INFO "%s: setting genericElement failed\n",  in prism2_setup_rids()
1309 		printk(KERN_INFO "%s: first command failed - assuming card "  in prism2_hw_init()
1317 		printk(KERN_DEBUG "%s: init command completed too quickly - "  in prism2_hw_init()
1329 		printk(KERN_DEBUG "%s: assuming no Primary image in "  in prism2_hw_init()
1340 	printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n",  in prism2_hw_init()
1369 		printk("SWSUPPORT0 write/read failed: %04X != %04X\n",  in prism2_hw_init2()
1385 			printk(KERN_DEBUG "%s: Failed to read STA f/w version "  in prism2_hw_init2()
1405 				printk(KERN_DEBUG "%s: Using shorter TX FID "  in prism2_hw_init2()
1423 			printk("%s: could not get own MAC address\n",  in prism2_hw_init2()
1440 		printk(KERN_WARNING "%s: Initialization failed\n", dev_info);  in prism2_hw_init2()
1456 		printk("%s: MAC port 0 enabling failed\n", dev->name);  in prism2_hw_enable()
1469 		printk("%s: MAC port 0 resetting failed\n", dev->name);  in prism2_hw_enable()
1533 		printk(KERN_DEBUG "%s: card already removed or not configured "  in prism2_hw_shutdown()
1540 		printk(KERN_WARNING "%s: Shutdown failed\n", dev_info);  in prism2_hw_shutdown()
1570 		printk(KERN_DEBUG "%s: driver bug - prism2_hw_reset() called "  in prism2_hw_reset()
1579 		printk(KERN_WARNING "%s: %s: already resetting card - "  in prism2_hw_reset()
1586 		printk(KERN_WARNING "%s: too many reset tries, skipping\n",  in prism2_hw_reset()
1591 	printk(KERN_WARNING "%s: %s: resetting card\n", dev_info, dev->name);  in prism2_hw_reset()
1611 		printk(KERN_DEBUG "%s: persistent download of primary "  in prism2_hw_reset()
1614 			printk(KERN_WARNING "%s: download (PRI) failed\n",  in prism2_hw_reset()
1619 		printk(KERN_DEBUG "%s: persistent download of secondary "  in prism2_hw_reset()
1622 			printk(KERN_WARNING "%s: download (SEC) failed\n",  in prism2_hw_reset()
1643 	printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name);  in handle_reset_queue()
1699 		printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n",  in prism2_transmit_cb()
1705 		printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid "  in prism2_transmit_cb()
1711 		printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called "  in prism2_transmit_cb()
1770 		printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called "  in prism2_transmit()
1786 		printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT "  in prism2_transmit()
1824 			printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -"  in prism2_tx_80211()
1877 		printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n",  in prism2_tx_80211()
1913 		printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):"  in prism2_read_fid_reg()
1921 	printk(KERN_WARNING "%s: Uhhuh.. could not read good fid from reg "  in prism2_read_fid_reg()
1945 		printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n",  in prism2_rx()
1962 		printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name,  in prism2_rx()
1988 			printk(KERN_DEBUG "%s: Received frame with invalid "  in prism2_rx()
1998 		printk(KERN_DEBUG "%s: RX failed to allocate skb\n",  in prism2_rx()
2009 		printk(KERN_DEBUG "%s: RX failed to read "  in prism2_rx()
2065 		printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n",  in hostap_rx_skb()
2127 				printk("Already released txfid found at idx "  in prism2_alloc_ev()
2130 				printk("Already reserved txfid found at idx "  in prism2_alloc_ev()
2151 	printk(KERN_WARNING "%s: could not find matching txfid (0x%04x, new "  in prism2_alloc_ev()
2154 	printk(KERN_DEBUG "TXFIDs:");  in prism2_alloc_ev()
2156 		printk(" %04x[%04x]", local->txfid[idx],  in prism2_alloc_ev()
2158 	printk("\n");  in prism2_alloc_ev()
2179 		printk(KERN_DEBUG "%s: TX callback - foreign frame\n",  in hostap_tx_callback()
2193 		printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n",  in hostap_tx_callback()
2202 		printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate "  in hostap_tx_callback()
2429 		printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n",  in prism2_info()
2444 		printk(KERN_DEBUG "%s: Received info frame with invalid "  in prism2_info()
2453 		printk(KERN_DEBUG "%s: Could not allocate skb for info "  in prism2_info()
2462 		printk(KERN_WARNING "%s: Info frame read failed (fid=0x%04x, "  in prism2_info()
2552 			printk(KERN_INFO "%s: SW TICK stuck? "  in prism2_ev_tick()
2559 			printk(KERN_INFO "%s: trying to recover from IRQ "  in prism2_ev_tick()
2588 			printk("%s: Interrupt, but SWSUPPORT0 does not match: "  in prism2_check_magic()
2594 			printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x "  in prism2_check_magic()
2624 			printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",  in prism2_interrupt()
2636 			printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n",  in prism2_interrupt()
2650 			printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n",  in prism2_interrupt()
2676 				printk(KERN_DEBUG "%s: prism2_interrupt: hw "  in prism2_interrupt()
2768 		printk(KERN_DEBUG "%s: defaulting to host-based encryption as "  in prism2_check_sta_fw_version()
2784 		printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a "  in prism2_check_sta_fw_version()
2810 			printk(KERN_DEBUG "%s: passive scan detected pending "  in hostap_passive_scan()
2827 			printk(KERN_INFO "%s: no allowed passive scan channels"  in hostap_passive_scan()
2832 		printk(KERN_DEBUG "%s: passive scan channel %d\n",  in hostap_passive_scan()
2847 		printk(KERN_ERR "%s: passive scan channel set %d "  in hostap_passive_scan()
3038 			printk(KERN_DEBUG "%s: set_tim failed (aid=%d "  in handle_set_tim_queue()
3098 		printk(KERN_WARNING "hostap: Invalid dev_template='%s'\n",  in prism2_init_local_data()
3169 		printk(KERN_WARNING "prism2: Unknown iw_mode %d; using "  in prism2_init_local_data()
3250 		printk(KERN_WARNING "%s: register netdevice failed!\n",  in prism2_init_local_data()
3254 	printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);  in prism2_init_local_data()