Lines Matching refs:DBG_PRINT
594 DBG_PRINT(ERR_DBG, in init_shared_mem()
609 DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - " in init_shared_mem()
627 DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n"); in init_shared_mem()
654 DBG_PRINT(INFO_DBG, in init_shared_mem()
665 DBG_PRINT(INIT_DBG, in init_shared_mem()
672 DBG_PRINT(INFO_DBG, in init_shared_mem()
709 DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a " in init_shared_mem()
864 DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", in init_shared_mem()
930 DBG_PRINT(INIT_DBG, in free_shared_mem()
1067 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n", in s2io_print_pci_mode()
1102 DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n", in s2io_print_pci_mode()
1210 DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n"); in init_nic()
1332 DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", in init_nic()
1642 DBG_PRINT(ERR_DBG, in init_nic()
1721 DBG_PRINT(ERR_DBG, "%s: RTI init failed\n", in init_nic()
2127 DBG_PRINT(ERR_DBG, "TDMA is not ready!\n"); in verify_xena_quiescence()
2131 DBG_PRINT(ERR_DBG, "RDMA is not ready!\n"); in verify_xena_quiescence()
2135 DBG_PRINT(ERR_DBG, "PFC is not ready!\n"); in verify_xena_quiescence()
2139 DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n"); in verify_xena_quiescence()
2143 DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n"); in verify_xena_quiescence()
2147 DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n"); in verify_xena_quiescence()
2151 DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n"); in verify_xena_quiescence()
2155 DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n"); in verify_xena_quiescence()
2167 DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n"); in verify_xena_quiescence()
2172 DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n"); in verify_xena_quiescence()
2276 DBG_PRINT(ERR_DBG, "%s: device is not ready, " in start_nic()
2391 DBG_PRINT(INTR_DBG, in free_tx_buffers()
2484 DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n", in fill_rx_buffers()
2497 DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", in fill_rx_buffers()
2520 DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n", in fill_rx_buffers()
2741 DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n", in free_rx_buffers()
2749 DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n", in s2io_chk_rx_buffers()
2874 DBG_PRINT(INFO_DBG, in s2io_netpoll()
2924 DBG_PRINT(INTR_DBG, "%s: Ring Full\n", in rx_intr_handler()
2930 DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n", in rx_intr_handler()
3063 DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n", in tx_intr_handler()
3201 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3203 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3207 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3209 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3213 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3215 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3219 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3256 DBG_PRINT(ERR_DBG, in s2io_updt_xpak_counter()
3264 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - " in s2io_updt_xpak_counter()
3417 DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n", in s2io_reset()
3440 DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__); in s2io_reset()
3557 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, " in s2io_set_swapper()
3590 DBG_PRINT(ERR_DBG, in s2io_set_swapper()
3651 DBG_PRINT(ERR_DBG, in s2io_set_swapper()
3674 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i); in wait_for_msix_trans()
3697 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", in restore_xmsi_data()
3719 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", in store_xmsi_data()
3745 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", in s2io_enable_msi_x()
3755 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", in s2io_enable_msi_x()
3793 DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n"); in s2io_enable_msi_x()
3838 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n", in s2io_test_msi()
3856 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated " in s2io_test_msi()
3932 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", in s2io_open()
3938 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); in s2io_open()
4032 DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name); in s2io_xmit()
4035 DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name); in s2io_xmit()
4041 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n", in s2io_xmit()
4114 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n"); in s2io_xmit()
4221 DBG_PRINT(TX_DBG, in s2io_xmit()
5002 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n", in s2io_set_multicast()
5024 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name); in s2io_set_multicast()
5031 DBG_PRINT(ERR_DBG, in s2io_set_multicast()
5057 DBG_PRINT(ERR_DBG, in s2io_set_multicast()
5087 DBG_PRINT(ERR_DBG, in s2io_set_multicast()
5157 DBG_PRINT(ERR_DBG, in do_s2io_add_mc()
5184 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n"); in do_s2io_add_mac()
5208 DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n", in do_s2io_delete_unicast_mc()
5228 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n"); in do_s2io_read_unicast_mc()
5293 DBG_PRINT(INFO_DBG, in do_s2io_prog_unicast()
5300 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n"); in do_s2io_prog_unicast()
5527 DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds); in s2io_ethtool_gringparam()
5757 DBG_PRINT(ERR_DBG, "Read of VPD data failed\n"); in s2io_vpd_read()
5821 DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n"); in s2io_ethtool_geeprom()
5853 DBG_PRINT(ERR_DBG, in s2io_ethtool_seeprom()
5869 DBG_PRINT(ERR_DBG, in s2io_ethtool_seeprom()
5903 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1); in s2io_register_test()
5909 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2); in s2io_register_test()
5919 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3); in s2io_register_test()
5925 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4); in s2io_register_test()
5933 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1); in s2io_register_test()
5941 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2); in s2io_register_test()
5989 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. " in s2io_eeprom_test()
6011 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. " in s2io_eeprom_test()
6259 DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n", in s2io_ethtool_test()
6689 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name); in s2io_change_mtu()
6699 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", in s2io_change_mtu()
6767 DBG_PRINT(ERR_DBG, in s2io_set_link()
6809 DBG_PRINT(INFO_DBG, "SKB is not NULL\n"); in set_rxd_buffer_pointer()
6819 DBG_PRINT(INFO_DBG, in set_rxd_buffer_pointer()
6848 DBG_PRINT(INFO_DBG, in set_rxd_buffer_pointer()
6972 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); in s2io_add_isr()
7015 DBG_PRINT(ERR_DBG, in s2io_add_isr()
7027 DBG_PRINT(ERR_DBG, in s2io_add_isr()
7031 DBG_PRINT(ERR_DBG, in s2io_add_isr()
7043 DBG_PRINT(INFO_DBG, in s2io_add_isr()
7051 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", in s2io_add_isr()
7124 DBG_PRINT(ERR_DBG, "Device not Quiescent - " in do_s2io_card_down()
7158 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", in s2io_card_up()
7179 DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n", in s2io_card_up()
7185 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i, in s2io_card_up()
7220 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name); in s2io_card_up()
7275 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name); in s2io_restart_nic()
7278 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name); in s2io_restart_nic()
7391 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n", in rx_osm_handler()
7471 DBG_PRINT(ERR_DBG, in rx_osm_handler()
7517 DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name); in s2io_link()
7525 DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name); in s2io_link()
7574 DBG_PRINT(ERR_DBG, "Requested number of tx fifos " in s2io_verify_parm()
7582 DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num); in s2io_verify_parm()
7590 DBG_PRINT(ERR_DBG, in s2io_verify_parm()
7598 DBG_PRINT(ERR_DBG, in s2io_verify_parm()
7600 DBG_PRINT(ERR_DBG, "Disabling transmit steering\n"); in s2io_verify_parm()
7605 DBG_PRINT(ERR_DBG, in s2io_verify_parm()
7607 DBG_PRINT(ERR_DBG, "Default to %d rx rings\n", in s2io_verify_parm()
7613 DBG_PRINT(ERR_DBG, "Wrong intr_type requested. " in s2io_verify_parm()
7621 DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. " in s2io_verify_parm()
7627 DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n"); in s2io_verify_parm()
7628 DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n"); in s2io_verify_parm()
7634 DBG_PRINT(ERR_DBG, "Requested rx ring size not " in s2io_verify_parm()
7728 DBG_PRINT(ERR_DBG, in s2io_init_nic()
7734 DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__); in s2io_init_nic()
7737 DBG_PRINT(ERR_DBG, in s2io_init_nic()
7744 DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__); in s2io_init_nic()
7751 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n", in s2io_init_nic()
7889 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name); in s2io_init_nic()
7896 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n", in s2io_init_nic()
7904 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n", in s2io_init_nic()
7938 DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n", in s2io_init_nic()
7948 DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n", in s2io_init_nic()
7966 DBG_PRINT(ERR_DBG, in s2io_init_nic()
8072 DBG_PRINT(ERR_DBG, "Device registration failed\n"); in s2io_init_nic()
8077 DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n"); in s2io_init_nic()
8078 DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name, in s2io_init_nic()
8080 DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, in s2io_init_nic()
8082 DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr); in s2io_init_nic()
8083 DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num); in s2io_init_nic()
8094 DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n", in s2io_init_nic()
8098 DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n", in s2io_init_nic()
8105 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name); in s2io_init_nic()
8108 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); in s2io_init_nic()
8112 DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name, in s2io_init_nic()
8115 DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name, in s2io_init_nic()
8120 DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name); in s2io_init_nic()
8123 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name); in s2io_init_nic()
8132 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n", in s2io_init_nic()
8135 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n", in s2io_init_nic()
8140 DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n", in s2io_init_nic()
8144 DBG_PRINT(ERR_DBG, in s2io_init_nic()
8149 DBG_PRINT(ERR_DBG, in s2io_init_nic()
8154 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", in s2io_init_nic()
8157 DBG_PRINT(ERR_DBG, in s2io_init_nic()
8208 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n"); in s2io_rem_nic()
8237 DBG_PRINT(INIT_DBG, in check_L2_lro_capable()
8269 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in check_for_socket_match()
8287 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in initiate_new_session()
8317 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in update_L3L4_header()
8343 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in aggregate_new_rx()
8367 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in verify_l3_l4_lro_capable()
8435 DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr); in s2io_club_tcp_session()
8449 DBG_PRINT(INFO_DBG, "%s: Out of sequence. " in s2io_club_tcp_session()
8489 DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n", in s2io_club_tcp_session()
8511 DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__); in s2io_club_tcp_session()