Lines Matching refs:camera

35 if you want to run more than 1 camera simultaneously). These routines fall
44 camera; some programs depend on a particular image-size or -format and
78    allocated during open(), so nothing is wasted when the camera is not in
90    With this option you can control the compression factor that the camera
112    this is let the LED blink while the camera is in use. This:
122    By default the camera's LED is on solid while in use, and turned off
123    when the camera is not used anymore.
130    open the camera device. Until then, the LED remains on.
134    never know what device a camera gets assigned; it depends on module load
138    should use with a specific camera. This is also handy if you have two
141    A camera is specified by its type (the number from the camera model,
160      dev_hint=645:1,680:2      The PCA645 camera will get /dev/video1,
163      dev_hint=645.0123:3,645.4567:0	The PCA645 camera with serialnumber
165 					camera model with the 4567 serial
168      dev_hint=750:1,4,5,6       The PCVC750 camera will get /dev/video1, the
180    - If a camera does not match any dev_hint, it will simply get assigned
224 cameras. Each camera has its own set of buffers.
232 preference for all camera's, but this parameter can be set per camera with