50 #define dprintk(level, fmt, arg...) if (debug >= level) \  macro
312 	dprintk(1, "%s()\n", __func__);  in xc5000_tuner_reset()
419 	dprintk(1, "%s()\n", __func__);  in xc_initialize()
427 	dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, video_mode, audio_mode);  in xc_set_tv_standard()
429 		dprintk(1, "%s() Standard = %s\n",  in xc_set_tv_standard()
433 		dprintk(1, "%s() Standard = %s\n",  in xc_set_tv_standard()
447 	dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,  in xc_set_signal_source()
465 	dprintk(1, "%s(%u)\n", __func__, freq_hz);  in xc_set_rf_frequency()
483 	dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",  in xc_set_IF_frequency()
593 	dprintk(1, "%s(%u)\n", __func__, freq_hz);  in xc_tune_channel()
640 	dprintk(1, "waiting for firmware upload (%s)...\n",  in xc5000_fwupload()
648 	dprintk(1, "firmware uploading...\n");  in xc5000_fwupload()
652 		dprintk(1, "Firmware upload complete...\n");  in xc5000_fwupload()
681 	dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);  in xc_debug_dump()
684 	dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);  in xc_debug_dump()
687 	dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",  in xc_debug_dump()
693 	dprintk(1, "*** HW: V%d.%d, FW: V %d.%d.%d\n",  in xc_debug_dump()
698 	dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);  in xc_debug_dump()
701 	dprintk(1, "*** Frame lines = %d\n", frame_lines);  in xc_debug_dump()
704 	dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality & 0x07);  in xc_debug_dump()
707 	dprintk(1, "*** Unweighted analog SNR = %d dB\n", snr & 0x3f);  in xc_debug_dump()
710 	dprintk(1, "*** Total gain = %d.%d dB\n", totalgain / 256,  in xc_debug_dump()
715 		dprintk(1, "*** PLL lock status = 0x%04x\n", regval);  in xc_debug_dump()
748 	dprintk(1, "%s() setting OUTPUT_AMP to 0x%x\n",  in xc5000_tune_digital()
771 		dprintk(1, "Unable to load firmware and init tuner\n");  in xc5000_set_digital_params()
775 	dprintk(1, "%s() frequency=%d (Hz)\n", __func__, freq);  in xc5000_set_digital_params()
779 		dprintk(1, "%s() VSB modulation\n", __func__);  in xc5000_set_digital_params()
785 		dprintk(1, "%s() QAM modulation\n", __func__);  in xc5000_set_digital_params()
798 		dprintk(1, "%s() OFDM\n", __func__);  in xc5000_set_digital_params()
820 		dprintk(1, "%s() QAM modulation\n", __func__);  in xc5000_set_digital_params()
835 		dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__,  in xc5000_set_digital_params()
846 	dprintk(1, "%s() frequency=%d (compensated to %d)\n",  in xc5000_set_digital_params()
866 	dprintk(1, "%s() returns %s id = 0x%x\n", __func__,  in xc5000_is_firmware_loaded()
876 	dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",  in xc5000_config_tv()
966 			dprintk(1, "xc5000: PLL not locked (0x%x).  Reloading...\n",  in xc5000_set_tv_freq()
985 	dprintk(1, "%s() frequency=%d (in units of khz)\n",  in xc5000_config_radio()
989 		dprintk(1, "%s() radio input not configured\n", __func__);  in xc5000_config_radio()
1012 		dprintk(1, "%s() unknown radio input %d\n", __func__,  in xc5000_set_radio_freq()
1049 		dprintk(1, "Unable to load firmware and init tuner\n");  in xc5000_set_params()
1094 	dprintk(1, "%s()\n", __func__);  in xc5000_get_frequency()
1102 	dprintk(1, "%s()\n", __func__);  in xc5000_get_if_frequency()
1110 	dprintk(1, "%s()\n", __func__);  in xc5000_get_bandwidth()
1123 	dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);  in xc5000_get_status()
1151 		dprintk(1, "firmware read %Zu bytes.\n", fw->size);  in xc_load_fw_and_init_tuner()
1253 	dprintk(1, "%s()\n", __func__);  in xc5000_do_timer_sleep()
1269 	dprintk(1, "%s()\n", __func__);  in xc5000_sleep()
1286 	dprintk(1, "%s()\n", __func__);  in xc5000_suspend()
1303 	dprintk(1, "%s()\n", __func__);  in xc5000_resume()
1316 	dprintk(1, "%s()\n", __func__);  in xc5000_init()
1333 	dprintk(1, "%s()\n", __func__);  in xc5000_release()
1358 	dprintk(1, "%s()\n", __func__);  in xc5000_set_config()
1404 	dprintk(1, "%s(%d-%04x)\n", __func__,  in xc5000_attach()