Lines Matching refs:you

37 	  Choose Y here if you have this FM radio chip.
39 	  In order to control your radio card, you will need to use programs
51 	  Say Y here if you want to connect this type of radio to your
53 	  you must connect the line out connector to a sound card or a
63 	  Say Y here if you want to connect this type of radio to your
65 	  you must connect the line out connector to a sound card or a
76 	  Choose Y here if you have this radio card.  This card may also be
79 	  In order to control your radio card, you will need to use programs
92 	  Choose Y here if you have this radio receiver.
97 	  In order to control your radio card, you will need to use programs
109 	  Choose Y here if you have this radio receiver.
114 	  In order to control your radio card, you will need to use programs
126 	  Say Y here if you want to connect this type of FM transmitter
140 	  Say Y here if you want to connect this type of AM/FM/SW receiver
150 	  Say Y here if you want to connect this type of radio to your
152 	  you must connect the line out connector to a sound card or a
162 	  Say Y here if you want to use the TEA5764 FM chip found in
181 	  Say Y here if you want to use the SAA7706H Car radio Digital
193 	  Say Y here if you want to use the TEF6862 Car Radio Enhanced
219 	  Choose Y here if you have this FM radio chip.
221 	  In order to control your radio card, you will need to use programs
253 	  Choose Y here if you have one of these AM/FM radio cards, and then
264 	  Choose Y here if you have one of these FM radio cards, and then fill
271 	  If you have a GemTeks combined (PnP) sound- and radio card you must
287 	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
295 	  Choose Y here if you have this FM radio card, and then fill in the
299 	  of hardware. If you have this hardware, then please contact the
310 	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
318 	  Choose Y here if you have one of these FM radio cards, and then fill
329 	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
338 	  Choose Y here if you have this FM radio card, and then fill in the
355 	  card default is 0x34c, if you haven't changed the jumper setting
379 	  Choose Y here if you have this FM radio card. You also need to enable
391 	  Choose Y here if you have one of these FM radio cards.
401 	  Choose Y here if you have one of these FM radio cards.
411 	  Choose Y here if you have this FM radio card.
414 	  of hardware. If you have this hardware, then please contact the
425 	  This is a driver for the Trust FM radio cards. Say Y if you have
429 	  of hardware. If you have this hardware, then please contact the
448 	  Choose Y here if you have one of these FM radio cards, and then fill
452 	  of hardware. If you have this hardware, then please contact the
471 	  completely silent. If the volume is just turned down, you can still
473 	  radio device is set to the frequency you can enter here whenever
482 	  Choose Y here if you have one of these FM radio cards, and then fill
486 	  of hardware. If you have this hardware, then please contact the