2918 			pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",  in bttv_idcard()
2925 			pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",  in bttv_idcard()
2937 	pr_info("%d: using: %s [card=%d,%s]\n",  in bttv_idcard()
2959 	pr_info("%d: gpio config override: mask=0x%x, mux=",  in bttv_idcard()
2986 		pr_info("%d: detected by eeprom: %s [card=%d]\n",  in identify_by_eeprom()
3031 		pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);  in flyvideo_gpio()
3048 	pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",  in flyvideo_gpio()
3051 	pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",  in flyvideo_gpio()
3103 		pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",  in miro_pinnacle_gpio()
3149 		pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",  in miro_pinnacle_gpio()
3398 			pr_info("%d: radio detected by subsystem id (CPH05x)\n",  in bttv_init_card2()
3498 		pr_info("%d: tuner absent\n", btv->c.nr);  in bttv_init_card2()
3502 		pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);  in bttv_init_card2()
3703 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",  in modtec_eeprom()
3707 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",  in modtec_eeprom()
3711 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",  in modtec_eeprom()
3714 		pr_info("%d: Modtec: Unknown TunerString: %s\n",  in modtec_eeprom()
3727 	pr_info("%d: Hauppauge eeprom indicates model#%d\n",  in hauppauge_eeprom()
3735 		pr_info("%d: Switching board type from %s to %s\n",  in hauppauge_eeprom()
3822 		pr_info("%d: detected TEA575x radio\n", btv->c.nr);  in tea575x_init()
3849 		pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);  in terratec_active_radio_upgrade()
3920 	pr_info("%d: altera firmware upload %s\n",  in pvr_boot()
4017 			pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",  in osprey_eeprom()
4024 	pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",  in osprey_eeprom()
4036 		pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",  in osprey_eeprom()
4080 	pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",  in avermedia_eeprom()
4135 		pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",  in boot_msp34xx()
4175 	pr_info("Setting DAC reference voltage level ...\n");  in init_PXC200()
4184 	pr_info("Initialising 12C508 PIC chip ...\n");  in init_PXC200()
4203 			pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",  in init_PXC200()
4208 	pr_info("PXC200 Initialised\n");  in init_PXC200()
4247 	pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",  in init_RTV24()
4261 		pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",  in init_RTV24()
4274 		pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",  in init_RTV24()
4280 	pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);  in init_RTV24()
4337 			pr_info("PCI-8604PW unlocked\n");  in init_PCI8604PW()
4895 		pr_info("Host bridge needs ETBF enabled\n");  in bttv_check_chipset()
4897 		pr_info("Host bridge needs VSFX enabled\n");  in bttv_check_chipset()
4899 		pr_info("bttv and your chipset may not work together\n");  in bttv_check_chipset()
4901 			pr_info("overlay will be disabled\n");  in bttv_check_chipset()
4904 			pr_info("overlay forced. Use this option at your own risk.\n");  in bttv_check_chipset()
4908 		pr_info("pci latency fixup [%d]\n", latency);  in bttv_check_chipset()
4914 			pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",  in bttv_check_chipset()
4928 			pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",  in bttv_handle_chipset()
4931 			pr_info("%d: enabling VSFX\n", btv->c.nr);  in bttv_handle_chipset()
4933 			pr_info("%d: setting pci timer to %d\n",  in bttv_handle_chipset()