37 static int debug;  variable
38 module_param(debug, int, 0644);
39 MODULE_PARM_DESC(debug, "debug level (0-2)");
234 	v4l2_dbg(1, debug, sd, "%s:\n", __func__);  in adv7511_edid_rd()
394 	v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val);  in adv7511_s_ctrl()
608 	v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off");  in adv7511_s_power()
629 		v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__);  in adv7511_s_power()
634 		v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i);  in adv7511_s_power()
661 	v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");  in adv7511_set_isr()
699 	v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status);  in adv7511_isr()
731 	v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));  in adv7511_s_stream()
747 	v4l2_dbg(1, debug, sd, "%s:\n", __func__);  in adv7511_s_dv_timings()
776 	v4l2_dbg(1, debug, sd, "%s:\n", __func__);  in adv7511_g_dv_timings()
814 	v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));  in adv7511_s_audio_stream()
1144 static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, u8 *buf)  in adv7511_dbg_dump_edid()  argument
1146 	if (debug >= lvl) {  in adv7511_dbg_dump_edid()
1148 		v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment);  in adv7511_dbg_dump_edid()
1153 				v4l2_dbg(lvl, debug, sd, "\n");  in adv7511_dbg_dump_edid()
1159 			v4l2_dbg(lvl, debug, sd, "%s\n", b);  in adv7511_dbg_dump_edid()
1182 	v4l2_dbg(1, debug, sd, "%s:\n", __func__);  in adv7511_edid_handler()
1195 			v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__);  in adv7511_edid_handler()
1206 	v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);  in adv7511_edid_handler()
1211 	v4l2_dbg(1, debug, sd, "%s\n", __func__);  in adv7511_audio_setup()
1222 	v4l2_dbg(1, debug, sd, "%s\n", __func__);  in adv7511_setup()
1267 	v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n",  in adv7511_check_monitor_present_status()
1278 		v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);  in adv7511_check_monitor_present_status()
1280 			v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__);  in adv7511_check_monitor_present_status()
1284 				v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__);  in adv7511_check_monitor_present_status()
1293 		v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__);  in adv7511_check_monitor_present_status()
1297 		v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__);  in adv7511_check_monitor_present_status()
1299 			v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__);  in adv7511_check_monitor_present_status()
1350 	v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",  in adv7511_check_edid_status()
1364 		v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment);  in adv7511_check_edid_status()
1366 		adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]);  in adv7511_check_edid_status()
1369 			v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks);  in adv7511_check_edid_status()
1385 			v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);  in adv7511_check_edid_status()
1393 		v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments);  in adv7511_check_edid_status()
1416 	v4l2_dbg(1, debug, sd, "%s\n", __func__);  in adv7511_init_setup()
1461 	v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n",  in adv7511_probe()
1564 	v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,  in adv7511_remove()