29 	struct i2c_client *client = s->client;  in sp2_read_i2c()  local
30 	struct i2c_adapter *adap = client->adapter;  in sp2_read_i2c()
33 			.addr = client->addr,  in sp2_read_i2c()
38 			.addr = client->addr,  in sp2_read_i2c()
48 		dev_err(&client->dev, "i2c read error, reg = 0x%02x, status = %d\n",  in sp2_read_i2c()
56 	dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %02x\n",  in sp2_read_i2c()
57 				client->addr, reg, buf[0]);  in sp2_read_i2c()
66 	struct i2c_client *client = s->client;  in sp2_write_i2c()  local
67 	struct i2c_adapter *adap = client->adapter;  in sp2_write_i2c()
69 		.addr = client->addr,  in sp2_write_i2c()
76 		dev_err(&client->dev, "i2c wr reg=%02x: len=%d is too big!\n",  in sp2_write_i2c()
87 		dev_err(&client->dev, "i2c write error, reg = 0x%02x, status = %d\n",  in sp2_write_i2c()
95 	dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %*ph\n",  in sp2_write_i2c()
96 				client->addr, reg, len, buf);  in sp2_write_i2c()
136 		dev_err(&s->client->dev, "callback not defined");  in sp2_ci_op_cam()
143 	dev_dbg(&s->client->dev, "%s: slot=%d, addr=0x%04x, %s, data=%x",  in sp2_ci_op_cam()
189 	dev_dbg(&s->client->dev, "slot: %d\n", slot);  in sp2_ci_slot_reset()
219 	dev_dbg(&s->client->dev, "slot:%d\n", slot);  in sp2_ci_slot_shutdown()
230 	dev_dbg(&s->client->dev, "slot:%d\n", slot);  in sp2_ci_slot_ts_enable()
249 	dev_dbg(&s->client->dev, "slot:%d open:%d\n", slot, open);  in sp2_ci_poll_slot_status()
313 	dev_dbg(&s->client->dev, "\n");  in sp2_init()
350 	dev_dbg(&s->client->dev, "init failed=%d\n", ret);  in sp2_init()
354 static int sp2_exit(struct i2c_client *client)  in sp2_exit()  argument
358 	dev_dbg(&client->dev, "\n");  in sp2_exit()
360 	if (client == NULL)  in sp2_exit()
363 	s = i2c_get_clientdata(client);  in sp2_exit()
375 static int sp2_probe(struct i2c_client *client,  in sp2_probe()  argument
378 	struct sp2_config *cfg = client->dev.platform_data;  in sp2_probe()
382 	dev_dbg(&client->dev, "\n");  in sp2_probe()
387 		dev_err(&client->dev, "kzalloc() failed\n");  in sp2_probe()
391 	s->client = client;  in sp2_probe()
396 	i2c_set_clientdata(client, s);  in sp2_probe()
402 	dev_info(&s->client->dev, "CIMaX SP2 successfully attached\n");  in sp2_probe()
405 	dev_dbg(&client->dev, "init failed=%d\n", ret);  in sp2_probe()
411 static int sp2_remove(struct i2c_client *client)  in sp2_remove()  argument
413 	struct sp2 *s = i2c_get_clientdata(client);  in sp2_remove()
415 	dev_dbg(&client->dev, "\n");  in sp2_remove()
416 	sp2_exit(client);  in sp2_remove()