129 				DBG_ERR(("A: invalid bar[%d]=%08x", bar,  in diva_pri_init_card()
139 		DBG_ERR(("A: invalid irq"));  in diva_pri_init_card()
151 			DBG_ERR(("A: A(%d), can't map bar[%d]",  in diva_pri_init_card()
172 		DBG_ERR(("A: A(%d) can't get Serial Number, generated serNo=%ld",  in diva_pri_init_card()
342 		DBG_ERR(("A: A(%d) can't reset PRI adapter - please stop first",  in diva_pri_reset_adapter()
361 		DBG_ERR(("A: A(%d) CPU on PRI %ld is not alive!",  in diva_pri_reset_adapter()
366 		DBG_ERR(("A: A(%d) PRI %ld Board Selftest failed, error=%08lx",  in diva_pri_reset_adapter()
417 		DBG_ERR(("A: A(%d) write PRI address=0x%08lx",  in diva_pri_write_sdram_block()
444 		DBG_ERR(("A: A(%d) pri_start_adapter, adapter already running",  in diva_pri_start_adapter()
450 		DBG_ERR(("A: PRI %ld can't start, adapter not mapped",  in diva_pri_start_adapter()
478 		DBG_ERR(("A(%d) Adapter start failed 0x%08lx, TrapId=%08lx, debug=%08lx",  in diva_pri_start_adapter()
505 		DBG_ERR(("A: A(%d) interrupt test failed",  in diva_pri_start_adapter()
558 		DBG_ERR(("A: A(%d) can't stop PRI adapter - not running",  in diva_pri_stop_adapter()
582 		DBG_ERR(("A: A(%d) no final interrupt from PRI adapter",  in diva_pri_stop_adapter()
608 		DBG_ERR(("A: pri_cmd, invalid controller=%d != %d",  in diva_pri_cmd_card_proc()
754 		DBG_ERR(("A: A(%d) invalid cmd=%d", a->controller,  in diva_pri_cmd_card_proc()
810 		DBG_ERR(("A: apply Compaq BIOS workaround"))  in pri_get_serial_number()
859 			DBG_ERR(("A: failed to read serial number"))  in pri_get_serial_number()
866 		DBG_ERR(("A: failed to read DIVA signature word"))  in pri_get_serial_number()
881 		DBG_ERR(("A: failed to read serial number"))  in pri_get_serial_number()
935 		DBG_ERR(("A: DSP[%d] %04x(is) != %04x(should)",  in dsp_check_presence()
1018 					DBG_ERR(("A: MODULE[%d]-DSP[%d] failed",  in diva_pri_detect_dsps()
1027 		DBG_ERR(("A: ON BOARD-DSP[1] failed"))  in diva_pri_detect_dsps()
1030 		DBG_ERR(("A: ON BOARD-DSP[2] failed"))  in diva_pri_detect_dsps()