Lines Matching refs:here
7 Say Y here, and a list of supported touchscreens will be displayed.
22 Say Y here if you have a 88PM860x PMIC and want to enable
27 To compile this driver as a module, choose M here: the
35 Say Y here if you have a touchscreen interface using the
46 To compile this driver as a module, choose M here: the
53 Say Y here if you have a touchscreen interface using the
59 To compile this driver as a module, choose M here: the
65 Say Y here if you want to support a touchscreen interface using
70 To compile this driver as a module, choose M here: the
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
90 To compile this driver as a module, choose M here: the
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
110 Say Y here if you have Atmel mXT series I2C touchscreen,
115 To compile this driver as a module, choose M here: the
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
153 To compile this driver as a module, choose M here: the
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
166 To compile this driver as a module, choose M here: the
172 Say Y here if you have a touchscreen using controller from
179 To compile this driver as a module, choose M here: the
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
206 Say Y here if you have a Cypress Gen4 touchscreen.
210 To compile this driver as a module, choose M here.
216 Say Y here if the touchscreen is connected via I2C bus.
218 To compile this driver as a module, choose M here: the
225 Say Y here if the touchscreen is connected via SPI bus.
227 To compile this driver as a module, choose M here: the
235 Say Y here to enable the support for the touchscreen found
240 To compile this driver as a module, choose M here: the
247 Say Y here to support the touchscreen found on Dialog Semiconductor
252 To compile this driver as a module, choose M here: the
259 Say Y here if you have a Dynapro serial touchscreen connected to
264 To compile this driver as a module, choose M here: the
271 Say Y here if you have a Hampshire serial touchscreen connected to
276 To compile this driver as a module, choose M here: the
283 Say Y here to enable support for I2C connected EETI touch panels.
285 To compile this driver as a module, choose M here: the
292 Say Y here to enable support for I2C connected EETI
295 To compile this driver as a module, choose M here: the
303 Say Y here to enable support for the I2C connected FT6x06 and
308 To compile this driver as a module, choose M here: the
315 Say Y here if you have the Fujitsu touchscreen (such as one
321 To compile this driver as a module, choose M here: the
328 Say Y here if you have the Goodix touchscreen (such as one
335 To compile this driver as a module, choose M here: the
342 Say Y here if you have a ILI210X based touchscreen
350 To compile this driver as a module, choose M here: the
357 Say Y here if you want to add support for the IPROC touch
362 To compile this driver as a module, choose M here: the
370 Say Y here if you have the s3c2410 touchscreen.
374 To compile this driver as a module, choose M here: the
381 Say Y here if you have the Gunze AHL-51 touchscreen connected to
386 To compile this driver as a module, choose M here: the
393 Say Y here if you have an Elan eKTH I2C touchscreen
398 To compile this driver as a module, choose M here: the
405 Say Y here if you have an Elo serial touchscreen connected to
410 To compile this driver as a module, choose M here: the
417 Say Y here if you have an Wacom W8001 penabled serial touchscreen
422 To compile this driver as a module, choose M here: the
429 Say Y here if you want to use the I2C version of the Wacom
434 To compile this driver as a module, choose M here: the module
441 Say Y here if you have a LPC32XX device and want
444 To compile this driver as a module, choose M here: the
451 Say Y here if you have a MAX11801 based touchscreen
456 To compile this driver as a module, choose M here: the
463 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
468 To compile this driver as a module, choose M here: the
475 Say Y here if you have the MELFAS MMS114 touchscreen controller
480 To compile this driver as a module, choose M here: the
487 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
492 To compile this driver as a module, choose M here: the
499 Say Y here if you have a Freescale i.MX6UL, and want to
504 To compile this driver as a module, choose M here: the
511 Say Y here if you have an iNexio serial touchscreen connected to
516 To compile this driver as a module, choose M here: the
523 Say Y here if you have a Intel MID based touchscreen in
528 To compile this driver as a module, choose M here: the
534 Say Y here if you have the ICS MicroClock MK712 touchscreen
539 To compile this driver as a module, choose M here: the
546 Say Y here if you have a HP Jornada 620/660/680/690 and want to
549 To compile this driver as a module, choose M here: the
556 Say Y here if you have a HP Jornada 710/720/728 and want
559 To compile this driver as a module, choose M here: the
566 Say Y here to enable support for the touchscreen attached to
571 To compile this driver as a module, choose M here: the
578 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
583 To compile this driver as a module, choose M here: the
590 Say Y here if you have a Penmount serial touchscreen connected to
595 To compile this driver as a module, choose M here: the
602 Say Y here if you have an EDT "Polytouch" touchscreen based
608 To compile this driver as a module, choose M here: the
615 Say Y here to enable MIGO-R touchscreen support.
619 To compile this driver as a module, choose M here: the
626 Say Y here if you have a Touchright serial touchscreen connected to
631 To compile this driver as a module, choose M here: the
638 Say Y here if you have a Touchwin serial touchscreen connected to
643 To compile this driver as a module, choose M here: the
650 Say Y here if you have 4/5/8 wire touchscreen controller
655 To compile this driver as a module, choose M here: the
671 To compile this driver as a module, choose M here: the
678 Say Y here if you have a pixcir i2c touchscreen
683 To compile this driver as a module, choose M here: the
690 Say Y here if you have a Weida WDT87XX I2C touchscreen
695 To compile this driver as a module, choose M here: the
705 To compile this driver as a module, choose M here: the
712 Say Y here if you have a Wolfson Microelectronics WM97xx
719 To compile this driver as a module, choose M here: the
727 Say Y here to enable support for the Wolfson Microelectronics
735 Say Y here to enable support for the Wolfson Microelectronics
743 Say Y here to enable support for the Wolfson Microelectronics
750 Say Y here for support for streaming mode with WM97xx touchscreens
758 To compile this driver as a module, choose M here: the module will
765 Say Y here for support for streaming mode with WM97xx touchscreens
770 To compile this driver as a module, choose M here: the
778 Say Y here for support for streaming mode with the touchscreen
783 To compile this driver as a module, choose M here: the
811 To compile this driver as a module, choose M here: the
818 Say Y here if you have an Freescale MC13783 PMIC on your
823 To compile this driver as a module, choose M here: the
916 Say Y here if you have an EasyTouch USB Touch controller.
923 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
927 To compile this driver as a module, choose M here: the
934 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
939 To compile this driver as a module, choose M here: the
951 Say Y here if you have a TSC2004 based touchscreen.
955 To compile this driver as a module, choose M here: the
964 Say Y here if you have a TSC2005 based touchscreen.
968 To compile this driver as a module, choose M here: the
975 Say Y here if you have a TSC2007 based touchscreen.
979 To compile this driver as a module, choose M here: the
986 Say Y here if you have a W90P910 based touchscreen.
988 To compile this driver as a module, choose M here: the
995 Say Y here if you have a Motorola EZX telephone and
998 To compile this driver as a module, choose M here: the
1005 Say Y here if you want to support Sitronix ST1232
1010 To compile this driver as a module, choose M here: the
1018 Say Y here if you want support for STMicroelectronics
1021 To compile this driver as a module, choose M here: the
1033 To compile this driver as a module, choose M here: the
1043 Say Y here if you want support for the Samsung SUR40 touchscreen
1046 To compile this driver as a module, choose M here: the
1053 Say Y here if you have a Semtech SX8654 touchscreen controller.
1057 To compile this driver as a module, choose M here: the
1065 Say Y here if you have a TPS6507x based touchscreen
1070 To compile this driver as a module, choose M here: the
1078 Say Y here if you have a touchscreen using the zforce
1083 To compile this driver as a module, choose M here: the
1090 Say Y here if you have a Colibri VF50 and plan to use
1095 To compile this driver as a module, choose M here: the
1102 Say Y here if you have a touchscreen using ROHM BU21023/24.
1106 To compile this driver as a module, choose M here: the