Lines Matching refs:driver

20 	  This driver can also be built as a module.  If so, the module
32 	  This driver can also be built as a module.  If so, the module
42 	  This driver can also be built as a module.  If so, the module
50 	  756/766/768 mainboard I2C interfaces.  The driver also includes
54 	  This driver can also be built as a module.  If so, the module
67 	  This driver can also be built as a module.  If so, the module
77 	  This driver can also be built as a module.  If so, the module
81 	tristate "Hix5hd2 high-speed I2C driver"
87 	  This driver can also be built as a module.  If so, the module
131 	  This driver can also be built as a module.  If so, the module
142 	  This driver can also be built as a module. If so, the module
152 	  This driver can also be built as a module.  If so, the module will be
182 	  controllers. This driver will attempt to use both controllers
185 	  This driver can also be built as a module.  If so, the module
195 	  This driver can also be built as a module.  If so, the module
208 	  This driver can also be built as a module.  If so, the module
218 	  This driver can also be built as a module.  If so, the module
228 	  This driver can also be built as a module.  If so, the module
246 	  This driver can also be built as a module.  If so, the module
257 	  This driver can also be built as a module.  If so, the module
279 	  This driver can also be built as a module.  If so, the module
289 	  This driver supports the SMBus Control Method Interface. It needs the
293 	  To compile this driver as a module, choose M here:
336 	  to support combined I2C messages.  Use the i2c-gpio driver
343 	  are facing this situation, use the i2c-gpio driver.
352 	  This driver can also be built as a module.  If so, the module
413 	  This is the I2C bus driver for Blackfin on-chip TWI interface.
415 	  This driver can also be built as a module.  If so, the module
434 	tristate "CBUS I2C driver"
440 	  This driver can also be built as a module.  If so, the module
450 	  This driver can also be built as a module.  If so, the module
454 	tristate "DaVinci I2C driver"
457 	  Support for TI DaVinci I2C controller driver.
459 	  This driver can also be built as a module.  If so, the module
462 	  Please note that this driver might be needed to bring up other
477 	  This driver can also be built as a module.  If so, the module
488 	  This driver can also be built as a module.  If so, the module
495 	  This driver enables managed host access to the PMIC I2C bus on select
502 	tristate "Conexant Digicolor I2C driver"
505 	  Support for Conexant Digicolor SoCs (CX92755) I2C controller driver.
507 	  This driver can also be built as a module.  If so, the module
514 	  This driver supports the i2c block found in Energy Micro's EFM32
521 	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
523 	  This driver can access PCH I2C bus device.
525 	  This driver also can be used for LAPIS Semiconductor IOH(Input/
540 	tristate "Exynos5 high-speed I2C driver"
551 	  This is a very simple bitbanging I2C driver utilizing the
563 	  This driver can also be built as a module.  If so, the module
573 	  This driver can also be built as a module.  If so, the module
583 	  This driver can also be built as a module.  If so, the module
593 	  This driver can also be built as a module.  If so, the module
603 	  This driver can also be built as a module.  If so, the module
622 	  This driver can also be built as a module. If so, the module
629 	  This driver supports the I2C interface found several NXP
632 	  This driver can also be built as a module.  If so, the module
650 	  This driver can also be built as a module.  If so, the module
658 	  This selects the MediaTek(R) Integrated Inter Circuit bus driver
669 	  This driver is also used for Allwinner SoCs I2C controllers.
671 	  This driver can also be built as a module.  If so, the module
682 	  This driver can also be built as a module.  If so, the module
700 	  This driver can also be built as a module.  If so, the module
724 	  This driver supports a memory mapped Philips PCA9564/PCA9665
727 	  This driver can also be built as a module.  If so, the module
734 	  This driver supports the PMC TWI controller on MSP devices.
736 	  This driver can also be built as module. If so, the module
743 	  This driver supports the Philips IP3204 I2C IP block master and/or
746 	  This driver can also be built as a module.  If so, the module
754 	  This driver supports the I2C IP inside the PKUnity-v3 SoC.
757 	  This driver can also be built as a module.  If so, the module
765 	  This driver can also be built as a module.  If so, the module
786 	  This driver can also be built as a module.  If so, the module
796 	  This driver can also be built as a module.  If so, the module
806 	  This driver can also be built as a module. If so, the module will
827 	  This driver supports the 2 I2C interfaces on the Renesas SH7760.
829 	  This driver can also be built as a module.  If so, the module
840 	  This driver can also be built as a module.  If so, the module
848 	  the Simtec Generic I2C interface. This driver is for the
852 	  This driver can also be built as a module. If so, the module
862 	  This driver can also be built as a module.  If so, the module
872 	  This driver can also be built as module. If so, the module
885 	  This driver can also be built as a module. If so, the module
932 	  This driver can also be built as a module.  If so, the module
942 	  This driver can also be built as a module. If so, the module will be
952 	  This driver can also be built as a module.  If so, the module
962 	  This driver can also be built as a module.  If so, the module
969 	  This driver enables support for the on-chip I2C interface of
972 	  This driver can also be built as a module.  If so, the module
979 	  This driver enables support for the on-chip I2C interface of
982 	  This driver can also be built as a module.  If so, the module will
993 	  This driver can also be built as a module.  If so, the module
1005 	  This driver can also be built as a module.  If so, the module
1015 	 This driver can also be built as a module.  If so, the module
1027 	  no extra chipset is supported by this driver, or could be.
1029 	  This driver is a replacement for (and was inspired by) an older
1030 	  driver named i2c-philips-par.  The new driver supports more devices,
1036 	  Another driver exists, named i2c-parport-light, which doesn't depend
1037 	  on the parport driver.  This is meant for embedded systems. Don't say
1051 	  no extra chipset is supported by this driver, or could be.
1053 	  This driver is a light version of i2c-parport.  It doesn't depend
1054 	  on the parport driver, and uses direct I/O access instead.  This
1074 	  This driver can also be built as a module.  If so, the module
1085 	  use this driver, you will need the inputattach tool, which is part
1101 	  This driver can also be built as a module.  If so, the module
1143 	  This driver supports ISA boards using the Philips PCA9564/PCA9665
1146 	  This driver can also be built as a module.  If so, the module
1149 	  This device is almost undetectable and using this driver on a
1191 	tristate "IBM OPAL I2C driver"
1196 	  the driver is based on the OPAL interfaces.
1198 	  This driver can also be built as a module. If so, the module will be