Lines Matching defs:nct6775_data
837 struct nct6775_data { struct
838 int addr; /* IO base of hw monitor block */
839 int sioreg; /* SIO register address */
840 enum kinds kind;
841 const char *name;
843 const struct attribute_group *groups[6];
845 u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
848 u8 temp_src[NUM_TEMP];
849 u16 reg_temp_config[NUM_TEMP];
850 const char * const *temp_label;
851 int temp_label_num;
853 u16 REG_CONFIG;
854 u16 REG_VBAT;
855 u16 REG_DIODE;
856 u8 DIODE_MASK;
858 const s8 *ALARM_BITS;
859 const s8 *BEEP_BITS;
861 const u16 *REG_VIN;
862 const u16 *REG_IN_MINMAX[2];
864 const u16 *REG_TARGET;
865 const u16 *REG_FAN;
866 const u16 *REG_FAN_MODE;
867 const u16 *REG_FAN_MIN;
868 const u16 *REG_FAN_PULSES;
869 const u16 *FAN_PULSE_SHIFT;
870 const u16 *REG_FAN_TIME[3];
872 const u16 *REG_TOLERANCE_H;
874 const u8 *REG_PWM_MODE;
875 const u8 *PWM_MODE_MASK;
877 const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
881 const u16 *REG_PWM_READ;
883 const u16 *REG_CRITICAL_PWM_ENABLE;
884 u8 CRITICAL_PWM_ENABLE_MASK;
885 const u16 *REG_CRITICAL_PWM;
887 const u16 *REG_AUTO_TEMP;
888 const u16 *REG_AUTO_PWM;
890 const u16 *REG_CRITICAL_TEMP;
891 const u16 *REG_CRITICAL_TEMP_TOLERANCE;
893 const u16 *REG_TEMP_SOURCE; /* temp register sources */
894 const u16 *REG_TEMP_SEL;
895 const u16 *REG_WEIGHT_TEMP_SEL;
896 const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
898 const u16 *REG_TEMP_OFFSET;
900 const u16 *REG_ALARM;
901 const u16 *REG_BEEP;
903 unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
904 unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
906 struct mutex update_lock;
907 bool valid; /* true if following fields are valid */
908 unsigned long last_updated; /* In jiffies */
911 u8 bank; /* current register bank */
912 u8 in_num; /* number of in inputs we have */
913 u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */
914 unsigned int rpm[NUM_FAN];
915 u16 fan_min[NUM_FAN];
916 u8 fan_pulses[NUM_FAN];
917 u8 fan_div[NUM_FAN];
918 u8 has_pwm;
919 u8 has_fan; /* some fan inputs can be disabled */
920 u8 has_fan_min; /* some fans don't have min register */
921 bool has_fan_div;
923 u8 num_temp_alarms; /* 2, 3, or 6 */
924 u8 num_temp_beeps; /* 2, 3, or 6 */
925 u8 temp_fixed_num; /* 3 or 6 */
926 u8 temp_type[NUM_TEMP_FIXED];
927 s8 temp_offset[NUM_TEMP_FIXED];
928 s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
930 u64 alarms;
931 u64 beeps;
933 u8 pwm_num; /* number of pwm */
934 u8 pwm_mode[NUM_FAN]; /* 1->DC variable voltage,
937 enum pwm_enable pwm_enable[NUM_FAN];
945 u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
950 u8 target_temp[NUM_FAN];
951 u8 target_temp_mask;
952 u32 target_speed[NUM_FAN];
953 u32 target_speed_tolerance[NUM_FAN];
954 u8 speed_tolerance_limit;
956 u8 temp_tolerance[2][NUM_FAN];
957 u8 tolerance_mask;
959 u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
962 int auto_pwm_num;
963 u8 auto_pwm[NUM_FAN][7];
964 u8 auto_temp[NUM_FAN][7];
965 u8 pwm_temp_sel[NUM_FAN];
966 u8 pwm_weight_temp_sel[NUM_FAN];
967 u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
971 u8 vid;
972 u8 vrm;
974 bool have_vid;
976 u16 have_temp;
977 u16 have_temp_fixed;
978 u16 have_in;
981 u8 vbat;
982 u8 fandiv1;
983 u8 fandiv2;
984 u8 sio_reg_enable;