226 	printk(KERN_WARNING "--- Register Dump ---\n");  in nmi()
228 	printk(KERN_WARNING "---------------------\n");  in nmi()
238 	printk(KERN_EMERG "\nCall Trace:\n");  in show_trace()
259 			printk(" [<%08lx>]", addr);  in show_trace()
263 				printk(" ?");  in show_trace()
265 			printk("\n");  in show_trace()
269 	printk("\n");  in show_trace()
284 	printk(KERN_EMERG "Stack:");  in show_stack()
289 			printk(KERN_EMERG "  ");  in show_stack()
290 		printk("%08lx ", *stack++);  in show_stack()
305 	printk(KERN_EMERG "PC:  %08lx EPSW:  %08lx  SSP: %08lx mode: %s\n",  in show_registers_only()
307 	printk(KERN_EMERG "d0:  %08lx   d1:  %08lx   d2: %08lx   d3: %08lx\n",  in show_registers_only()
309 	printk(KERN_EMERG "a0:  %08lx   a1:  %08lx   a2: %08lx   a3: %08lx\n",  in show_registers_only()
311 	printk(KERN_EMERG "e0:  %08lx   e1:  %08lx   e2: %08lx   e3: %08lx\n",  in show_registers_only()
313 	printk(KERN_EMERG "e4:  %08lx   e5:  %08lx   e6: %08lx   e7: %08lx\n",  in show_registers_only()
315 	printk(KERN_EMERG "lar: %08lx   lir: %08lx  mdr: %08lx  usp: %08lx\n",  in show_registers_only()
317 	printk(KERN_EMERG "cvf: %08lx   crl: %08lx  crh: %08lx  drq: %08lx\n",  in show_registers_only()
319 	printk(KERN_EMERG "threadinfo=%p task=%p)\n",  in show_registers_only()
324 		printk(KERN_EMERG "Process %s (pid: %d)\n",  in show_registers_only()
328 	printk(KERN_EMERG "CPUID:  %08x\n", CPUID);  in show_registers_only()
330 	printk(KERN_EMERG "CPUP:   %04hx\n", CPUP);  in show_registers_only()
331 	printk(KERN_EMERG "TBR:    %08x\n", TBR);  in show_registers_only()
332 	printk(KERN_EMERG "DEAR:   %08x\n", DEAR);  in show_registers_only()
333 	printk(KERN_EMERG "sISR:   %08x\n", sISR);  in show_registers_only()
334 	printk(KERN_EMERG "NMICR:  %04hx\n", NMICR);  in show_registers_only()
335 	printk(KERN_EMERG "BCBERR: %08x\n", BCBERR);  in show_registers_only()
336 	printk(KERN_EMERG "BCBEAR: %08x\n", BCBEAR);  in show_registers_only()
337 	printk(KERN_EMERG "MMUFCR: %08x\n", MMUFCR);  in show_registers_only()
338 	printk(KERN_EMERG "IPTEU : %08x  IPTEL2: %08x\n", IPTEU, IPTEL2);  in show_registers_only()
339 	printk(KERN_EMERG "DPTEU:  %08x  DPTEL2: %08x\n", DPTEU, DPTEL2);  in show_registers_only()
361 		printk(KERN_EMERG "\n");  in show_registers()
365 		printk(KERN_EMERG "\nCode: ");  in show_registers()
373 			printk("%02x ", c);  in show_registers()
380 	printk("\n");  in show_registers()
385 	printk(KERN_EMERG " Bad PC value.");  in show_registers()
411 	printk(KERN_EMERG "\n%s: %04x\n",  in die()
417 		printk(KERN_EMERG "Exception in usermode interrupt handler\n");  in die()
418 		printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");  in die()
436 	printk(KERN_EMERG "--- double fault ---\n");  in do_double_fault()
447 	printk(KERN_EMERG "Asynchronous I/O Bus Error\n");  in io_bus_error()
448 	printk(KERN_EMERG "==========================\n");  in io_bus_error()
451 		printk(KERN_EMERG "- Multiple recorded errors\n");  in io_bus_error()
453 	printk(KERN_EMERG "- Faulting Buses:%s%s%s\n",  in io_bus_error()
458 	printk(KERN_EMERG "- %s %s access made to %s at address %08x\n",  in io_bus_error()
469 	printk(KERN_EMERG "- Detected by the %s\n",  in io_bus_error()
477 	printk(KERN_EMERG "- PCI Memory Paging Reg:         %08x\n",  in io_bus_error()
479 	printk(KERN_EMERG "- PCI Bridge Base Address 0:     %08x\n",  in io_bus_error()
481 	printk(KERN_EMERG "- PCI Bridge AMPCI Base Address: %08x\n",  in io_bus_error()
483 	printk(KERN_EMERG "- PCI Bridge Command:                %04hx\n",  in io_bus_error()
485 	printk(KERN_EMERG "- PCI Bridge Status:                 %04hx\n",  in io_bus_error()
487 	printk(KERN_EMERG "- PCI Bridge Int Status:         %08hx\n",  in io_bus_error()
491 	printk(KERN_EMERG "\n");  in io_bus_error()
509 	printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF);  in uninitialised_exception()