Lines Matching refs:store
1236 mov.l %d0,EXC_OPWORD(%a6) # store OPWORD and EXTWORD
1327 # fcmp and ftst do not store any result.
1334 bsr.l store_fpreg # store the result
1872 # fcmp and ftst do not store any result.
1879 bsr.l store_fpreg # store the result
2375 # store_fpreg() - store opclass 0 or 2 result to FP regfile #
2427 # was executed from supervisor mode, this handler must store the FP #
2476 mov.l %d0,EXC_OPWORD(%a6) # store OPWORD and EXTWORD
2586 st STORE_FLG(%a6) # don't store a final result
2962 mov.l %d0,EXC_OPWORD(%a6) # store OPWORD and EXTWORD
2991 mov.w %d0,EXC_VOFF(%a6) # store stack shift value
3027 mov.l 0x8(%sp),(%sp) # store SR,hi(PC)
3028 mov.w 0xc(%sp),0x4(%sp) # store lo(PC)
3029 mov.w &0x4008,0x6(%sp) # store voff
3030 mov.l 0x2(%sp),0x8(%sp) # store ea
3031 mov.l &0x09428001,0xc(%sp) # store fslw
3075 # _dmem_write_{byte,word,long}() - store data to mem (opclass 3) #
3076 # store_dreg_{b,w,l}() - store data to data regfile (opclass 3) #
3077 # facc_out_{b,w,l}() - store to memory took access error (opcl 3) #
3285 # For opclass 3 instructions, the 060 doesn't store the default #
3583 # hardware doesn't store the correct result to the destination FP #
3585 # instruction in order to get this value and then store it to the #
3734 bsr.l fout # store the default result
4038 mov.l %a0,EXC_A7(%a6) # store a7'
4102 bsr.l store_fpreg # store result to fp regfile
5458 bsr sto_cos # store cosine result
5531 bsr sto_cos # store cosine result
5549 bsr sto_cos # store cosine result
5562 bsr sto_cos # store cosine result
9581 mov.l %d0,-(%sp) # store off ctrl bits for now
11636 fmovm.x &0x80,FP_SCR0(%a6) # store out result
13326 # then store the resulting FPSR bits. #
13461 mov.l %d0,L_SCR3(%a6) # store rnd info
13563 fmovm.x &0x80,FP_SCR0(%a6) # store out result
13960 mov.l %d0,L_SCR3(%a6) # store rnd info
14007 fmovm.x &0x80,FP_SCR0(%a6) # store out result
14301 mov.l %d0,L_SCR3(%a6) # store rnd info
14354 fmovm.x &0x80,FP_SCR0(%a6) # store result on stack
14442 fmovm.x &0x80,FP_SCR0(%a6) # store out result
14648 mov.l %d0,L_SCR3(%a6) # store rnd info
14792 fmovm.x &0x80,FP_SCR0(%a6) # store out result
15101 mov.l %d0,L_SCR3(%a6) # store rnd info
15245 fmovm.x &0x80,FP_SCR0(%a6) # store out result
15271 fmovm.x &0x40,FP_SCR0(%a6) # store result to stack
15685 fmovm.x &0x80,FP_SCR0(%a6) # store out result
15879 mov.w %d0,L_SCR1(%a6) # store src exponent
15880 mov.w %d1,2+L_SCR1(%a6) # store dst exponent
16255 # store_dreg_l() - store updated Dn value #
18048 # is enabled. if so, don't store result and correct stack frame